Displayport video input support for new 27" iMac

Does anyone know if the new 27" iMac just released today has support for displayport video input like the previous generation 27" iMac does? Please tell me you haven't taken this awesome feature away in the midst of the change to Thunderbolt ports etc! I'm asking because in the previous gen iMac specs it clearly states that displayport video input is supported but it doesn't mention it in the tech specs section of the new iMac.
Could someone from Apple please let me know? Thanks.
Mike

I am tempted to go out and buy a new HDMI to mini-displayport adapter and connect it to a new iMac at the Apple store to see for myself........
I'd hold up on that.  I don't see a mini displayport on the new iMac.  Looks like it goes through the Thunderbolt interface.  Scroll down to connectors.
http://www.apple.com/imac/specs.html
Captfred

Similar Messages

  • Apple aware of video problem in the new Intel iMacs

    Macworld Daily News
    Thursday - February 09, 2006
    Apple investigates Intel iMac Front Row problems
    By Macworld staff
    Apple has confirmed it is aware of, and investigating, reports of video problems in the new Intel iMacs.
    Recent reports claimed that some users had experienced random horizontal lines and other video playback problems when playing video in Front Row.
    "Apple is aware of this issue and is looking into it," the company said in an email to a web-based pressure group that has been gathering information on the problem. "If a customer has any technical issues, they should contact AppleCare."
    The problem is allegedly software-based.

    "Sure, I'd be more understanding had it been an issue that required a very special set of conditions to trigger"
    Apparently it does as this issue is not affecting all users.
    "As I was told, affected owners would not be proactively notified"
    Where you you prefer them to use their limited resources, trying to figure out who MAY be affected and sending them some sort of detailed action plan, or spending the resources determining the cause of the issue and developing a solution that can be distributed to the ones who need it not only now, but those that may discover the issue next week?
    I can understand that you are frustrated, and don't blame you for feeling that way, but this is an all new piece of technology and bugs are going to come up that were missed in testing. No company can afford to test at a 100% level. To do so would drive the costs so high as to make it impossible to sell the product, especially to the market the iMac is aimed at. Apple has a pretty darned good track record of resolving issues quickly when they appear. Until they do you only have a few choices. Use the workaround until the solution appears, waste time complaining about it, or sell the iMac and purchase a different product. That's really about all you can do!
    It was good of you to spend your valuable time, and yes it is valuable, trying to help the engineers or service reps solve the issue. That they spent that much time with you should show their commitment to solving this issue.
    Be patient, give them a chance, they have not had long to try and figure this out.

  • BIOS SUPPORT FOR NEW CPUS!!!!

      hello
    new post , i just got this board (6547 v1.0) board with a celeron 1.7 (clocked at 125mhz ) 2.14ghz and is total stable.
    v1.8 bios support up to a 1.8 cel, are they going to make a update to support a 2hz cel, OR  have they droped support for it.
    and where can you get beta bios for this and other board (msi-development site).... ?(  ;(
    MAKE A VOTE (HOW OLD IS YOU BOARD AND HAVE THEY DROPED SUPPORT FOR NEW CPU,S FOR YOU BOARD-POST?

    assuming its a 645 ultra by the bios numberlink

  • Support for new Nvidia Quadro gpu?

    When support for new Nvidia Quadro gpu? For example Nvida Quadro K2200 and K4200
    Thk

    What do you mean when you say "support"? All of After Effects OpenGL features already work on those cards.
    The only thing that isn't supported on those cards is GPU acceleration of the ray-traced 3D renderer, which is an obsolete and almost entirely irrelevant feature. No more GPUs will ever be added to the list of cards supported for that feature.
    Details:
    GPU (CUDA, OpenGL) features in After Effects

  • How to add support for new file type.

    Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
    I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
    I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
    Thank you

    Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
    Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
    CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
    LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
    I have done this but still not able to recognize the new file type.
    At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
    extension.xml
    <?xml version="1.0" encoding="windows-1252" ?>
    <extension xmlns="http://jcp.org/jsr/198/extension-manifest"
               id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
               rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
        <name rskey="EXTENSION_NAME">My Code Editor</name>
        <owner rskey="EXTENSION_OWNER">Me</owner>
        <dependencies>
            <import version="10.1.3">oracle.jdeveloper</import>
        </dependencies>
        <hooks>
            <jdeveloper-hook>
                <addins>
                    <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
                </addins>
            </jdeveloper-hook>
            <feature-hook>
                <description>My Code Editor</description>
                <optional>true</optional>
            </feature-hook>
            <document-hook>
                <documents>
                    <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                        <suffix>my</suffix>
                        <suffix>MY</suffix>
                    </by-suffix>
                </documents>
            </document-hook>
            <editor-hook>
                <editors>
                    <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                        <name rskey="EXTENSION_NAME">My Editor</name>
                    </editor>
                    <mappings>
                        <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">         
                            <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                       preferred="true"/>
                            <open-with editor-class="javax.ide.editor.CodeEditor"/>
                        </mapping>
                    </mappings>
                </editors>
            </editor-hook>
        </hooks>
    </extension>
    public class MyAddin implements Addin {
        public static final String MY_EXTENSION = "my";
        public void initialize() {
            System.out.println("MyEditor Constructor");
            new MyLanguageModule();
            Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
            CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
            LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
    }I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
    Todd

  • Video card question for new iMac

    Howdy all,
    I'm about to order a new BTO iMac, and I'm wondering if somebody could give me feedback on the two different video cards available.
    Cost is not really a concern here (I would rather spend more on the video card and cut back on something like RAM for now because RAM can be upgraded later). My main concern is performance and the best image quality.
    I understand the NVidia would be faster for 3D gaming than the ATI - which I would use a little bit. So the NVidia would seem to be a no-brainer.
    However, I've heard a couple people (on various forums) state that although the NVidia is definitaly faster for gaming - it performs slower than the ATI at some tasks like iMovie and iDVD tasks and text scrolling and motion are not as good.
    For me, I would love to have the faster 3D gaming speed of the NVidia for the few times I do game...but the most important thing to me is image quality for things like photo and video editing, working with documents etc. Are any of these thoughts regarding the NVidia vs ATI true?
    Does anybody have any advice regarding the performance these two cards? Any help would be really appreciated. Thanks!
    Sully

    I had the 20" 2.16 (late 2006 model) with the x1600 128MB and now have the 24" 2.8 2600Pro 256MB and 2G stock RAM. It's night and day with Call of Duty 2. I am able to play COD2 in 16:9 mode, all graphic settings max'd out and the fps? Wow! One most maps it ranges between 190-270fps! That smokes the previous version of 40-90fps. One the most complex maps my 24" drops to 90-110 range. Seriosuly, anything above about 60fps is perfectly playable! I'm thrilled with the stock card. However, COD2 is older, I play it native in OS X and do not game in boot camp. That may change a few things.

  • Ssd NCQ support for new iMac

    Will there ever be firmware with NCQ support for 256 ssd shipped with new iMacs? My ssd ("TS" marked, most likely Toshiba) does not have one, and that's a bit outdated don't you think.

    Kappy wrote:
    Although with a separate SSD and HDD you have to perform the work yourself you do gain some flexibility in your set up. However, should the urge arise there are numerous tutorial around that explain how to turn the SSD and HDD into a Fusion Drive using the same mechanism that Apple uses.
    And the converse is also possible and easy: you can turn the fusion drive back into two separate drives.
    If possible, I think you should put up the extra $250 for the Fusion Drive - especially considering this is not an option later on. With such a new machine, the internal hard drive will be the slowest part. 
    Still, even with a Fusion Drive, an external is strongly recommended. You should install FCP X in your regular system drive (fusion or not), and have your projects and events in an external. 
    Your proposed solution is adequate, depending only on available space. You only need your working projects and events to fit in the ssd. As long as you move them elsewhere when finished, to make room for the new ones, you'll be more than fine even with a smallish usb3 ssd.

  • Why no firewire support for new iPods?

    If firewire is so much better and faster why did the geniuses at Apple decide to discontinue support for it? It took me over 30 minutes to upload music & videos to my new iPod w/ USB, which would have taken 5-10 minutes with Firewire. I don't get it!

    They did it because they obviously didn't see the need for it.
    Either you have a usb 1.1 port, or have about 500mb of music. The speeds aren't that different between USB2.0 and FW. In fact, i think USB is faster. Stop complaining here, this is only a user-user support forum.

  • Video display ports for New Mac Pro

    I want to know if i can connect my IMAC as a primary or secondary screen using the Thunderbolt plug?  Will a mini-display cable simply work with one of the Thunderbolt ports?

    What are the requirements for TDM?
    A Mac notebook or desktop with a Mini DisplayPort or ThunderBolt connection
    A ThunderBolt or Mini DisplayPort cable
    A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
    iMac Model
    Cable Supported
    Port on Source Computer
    iMac (27-inch Late 2009)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (27-inch Mid 2010)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (21.5-inch, Mid 2011)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (27-inch, Mid 2011)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (21.5-inch, Late 2012)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (27-inch, Late 2012)
    Thunderbolt to Thunderbolt
    Thunderbolt
    That is the ENTIRE list of supported models.
    from this article:
    Target Display Mode: Frequently Asked Questions

  • Is it possible to add support for new database type in Data Modeler?

    Hi,
    I see that Data Modeler v.4 supports different versions of Oracle, DB2 and MS SQL. Is it possible to add support for a new database family,
    PostgreSQL for example? I hoped that RDBMS Site editor can do it, but so far I don't see any possibility to add XML files with metadata for a new RDBMS.
    I did it previously for PowerDesigner were it is possible to add and modify definitions for new relational databases.
    Thank you,
    Sergei

    There is discussion option as an out of the box feature. Check this: BI launch pad 4.0: Participate in a discussion about a document

  • CS5.1 support for new DSLR cameras (D600)

    I would like to understand the business decission (if there is any) why Adobe decided that for new DSLR  cameras support they will update only the Camera Raw version for the current release CS6 and not respecting the legacy for the n-1 release (updating the Camera raw for CS5.1).  This is a serious concern and disapointment.  Does it means that each time Adrobe has a new release , if i chnage the DLSR i am FORCED to upgrade and pay 190$ eventhus I do not need the new release features?

    Ah, thanks guys - I am very very happy to eat crow on that one!
    The actual point of my post was to make me feel better, and boy did it work!    I did not expect any actual relief, so actually now the post is twice is good as I thought - I was actually wrong!
    Anyway, I might mention (I didn't get into all the details) that I actually canceled the order for the d800e (the "e" version was backordered until just recently), as the d600 was just announced as my order was about to process.
    So actually I am in the same bad situation as the previous poster, but maybe now I will go back to the d800 - saving a $450 upgrade to CS6 actually saves half the difference in price between the cameras.
    And sorry for the rant on the 2 analogies.  It was not a troll.  I vaguely remember in my research that Lightbox comes with ACR, is that true?  Lightbox doesn't come with CS5.5 MC, but I wonder if i were to buy it ($99??) that'll give me the latest ACR that supports the d600, and problem solved.  I assume once i have the latest ACR it'll let me open straight into PS and not make me go through Lightbox and then PS?
    Anyway, if that is correct, that would be a much better answer to the original poster (and it saves him $100).  Other good answers (if this Lightbox hack won't work), might be:
    "It's an incredible amount of work to support nearly every camera and lens ever made in ACR, so even though it comes free with your software, you don't get free updates once your software moves to a new version."
    or
    "The d600 began shipping nearly immediately upon announcement, and it takes a while to update the software."  (perhaps the responder didn't realize it, but this was the situation with the d600.)
    But the car-story and "if you can afford a new camera, you can afford to pay adobe" were pretty tragic answers - someone needed to call you on it, or you would have only served to upset the original poster.
    Ha, PEBKAC, that is pretty good.  Not very easy to pronounce, though.
    I must say my last dozen interactions with adobe have all been negative, except this one, so maybe things are turning a new leaf.  You're lucky I didn't get into the story of when my HD crashed, and I had to call Adobe to re-activate my old CS4 PS.  It's awesome getting literally laughed at by the activation help desk person.  (I had owned the software for 3 years at that point, and had only ever activated it once.)  ...who just assumed I was lying.  "here now let me tell you how to deactivate the old version" "the HD is dead, it ain't going to happen" "well let me show you again, because you need to do that..."
    Oops, I did get into that story, didn't I?
    Best,
    Inline

  • Camera Raw support for new Nikon D810

    Hi, could you please advise when we can expect to see camera raw support for the new nikon D810.
    Thanks

    Adriana – I installed the download from the link in the 7/27 post and was able to convert my NEF files to DNG format from my new D810 camera, but could not view/edit the NEF-smalls. When I saw your latest post I used your link to go to that download and noticed that in the description it mentioned that the issues with the D810 NEF-small have been resolved.  I deleted/emptied trash of the 7/27 download and re-installed the one mentioned from your link – although they were both identical in file size and version: 8.6 – hmm?  I tried the converter – but nothing new was converted (I presume because all had already been converted before?).  However, CS6 is still not able to open/edit neither the NEF-small file formats, nor the DNG created from it.  I am thinking maybe I am missing a step, because when I select properties for Camera Raw in CS6, the version is 8.5.0.236 – is that ok (my CS6 version is 13.0.6 – and no other updates appear available)? I only downloaded the DNGConverter_8_6.dmg; installed the .pkg – did I forget a step? Thanks for your help!

  • How to extend interMedia to support for new Image Format

    Does anyone here has experience to extend interMedia to provide support for a new image format.
    I have read the related chapter in Oracle Intermedia User Guide, I'm not very clear about it. Hope a step-by-step tutorial for this topic is available.
    Thanks in advance for any idea

    Can you send the details of your application to [email protected] and explain the reasons extensibility is needed by your application?
    At this time, the only way to extend formats is to write your own procedures (ususally java stored procedures) to populate the image object... This does not extend the image processesing functionality to the new image format. Internally, this requires a translation to and from an intermediate format.
    Larry

  • DNG Converter support for New Camera

    What is the approximate usual time from the release date of a new camera
    (specifically the Sony DSC RX100) and support for the camera by ACR or
    DNG Converter ?

    ACR and the Adobe DNG Converter are updated in an orderly fashion from three to four times a year.  So you'll see a new version every three to four months.
    The release of any new camera model has no bearing on this.

  • Needed Raw-Support for new Samsung SLRs like NX1000

    Hopefully Apple is updating his support for these new cameras (they are still a few month on the market).

    You better tell Apple directly: Apple - Aperture - Feedback
    Here Apple probably will not hear you.

Maybe you are looking for

  • How can I create a new address book in Thunderbird?

    I cannot figure out how to create a brand new address in which to place 'contacts'.

  • Nokia x6 -- unable to browse this forum on defaul...

    I am able to browse many other websites with the default browser in my X6, include full screen ones, not just mobile sites. But I am NOT able to come to this forum. Everytime the X6 download about 50% (~500kb) of stuff, it just quit. I am using my WL

  • No Signal/Searching.. possible solution??

    I just received my second iPhone 4 yesterday, activated, synced... Everything was fine until this morning when I came to work. Again, it immediately went from 5 bars on Edge to Searching. Restarted phone, no change. Turned on/off Airplane mode, no ch

  • Layer disappear

    I am facing some problem while using wizard and layers. There are 2 layers and each has a graph and a table in it. What I want to do is that when the user presses a button in one layer, the contents of that layer should disappear and the contents of

  • HT5621 ID Security Questions

    I forgot my security questions answers. Where can I find them or change them????