Displays for G5

I have recently purchased a second hand G5 from an advertising agency I work for sometimes and was thinking of using an lcd monitor until i can afford an apple led cinema display. I have a recently bought samsung LS19CFEKF/EN at home and was wondering can I use that. It has dvi-d in which is good but the resolution is only 1360 x 768. Will I be able to use this or do I need a monitor that is 1920 x 1080. Any answers greatly appreciated. I am not picking the G5 up till next week hence me asking the question.

Sure you can use it until you can afford a new one.

Similar Messages

Using a second Mac as a display for a first

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
This Frequently answered question (FAQ) comes about:
Can an iMac/iBook/Powerbook/MacBook act as a display for another Mac since they all have a built-in display?
The truth is complicated because you have to consider who is doing the processing, and who has the drivers for the work being done.
1. For people who want the processing power of multiple Macs together, there is
Daugerresearch.com's Pooch.
2. Apple's Target Disk Mode lets you treat the hard disk of one Mac as an external drive to another. You do have to be careful with this, only the Mac that is currently booted to an active screen has its drivers enabled. If you need the drivers of the other Mac to do some sort of installation, it may not work right, or if you need it to run specific software.
3. The iMac 27" now has a DisplayPort Input port that allows displaying from a second Mac. See Using a 27-inch iMac as an external display. There are some hurdles to get there, however some third party solutions for those hurdles are listed on:
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
4. If you have a second screen to initially setup a Mac as a server of some sort you can make it "headless" (i.e. no second screen necessary) using one of these solutions:
iChat Screen Sharing
OSX VNC
Netopia's Timbuktu
Apple Remote Desktop
Microsoft Remote Desktop
Screen Recycler
Finder Screen Sharing
The speed of your network though can make such solutions appear too slow for words. If you use IP over Firewire on Mac OS X
10.5, 10.4, or 10.3 reasonable speeds can be obtained.
Elgato makes Firewire compatible capture devices which can capture S-Video. If you output the video of that Mac to an S-Video connector, you can view its video on the Elgato capture screen in 720 x 480 resolution. This usually is too little real estate for an effective second display, but for some it may be the quickest solution available.
In addition, Mac Minis, Intel based iMacs and Mac Pros do accept any display that supports VGA or DVI. Contrary to what you might think, you aren't stuck to Apple's displays. The Apple displays themselves are true Progressive LCDs that are widescreen with color matching, extra ports, and an extra place to put an iSight mount if you can find an original iSight. DVI supports more resolutions, and dual-link DVI even more.
This is the 2nd version of this tip. It was submitted on March 12, 2010 by a brody.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Hi Brian,
Thanks for using Apple Support Communities. You can mirror the displays or make whichever display you want the primary in Extended Desktop mode. See this article for details:
How to use multiple displays with your Mac
http://support.apple.com/kb/HT5019
The white bar at the top of the left blue box represents the menu bar and determines which display is your primary display. To change your primary display, click the white bar and drag and drop it on the blue box representing the display you would prefer to be your primary display.
Cheers,
- Ari

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
I tried using flickr and powerpoint as a work around but no luck. I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file. I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set. It still displays everything, pics and the wmv file at the default 3 sec.
I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

Welcome to the Apple Community.
No that's not possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

Air Display for Windows 7 not working

I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
Both my laptop and iPad are connected to the same WiFi.
Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

dwinpenny wrote:
Hi,
Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
Isight works fine in Mac OS (Skye, Oovoo, etc).
Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
Anyone got any ideas as to what I should do.
I have tried:
1. De-installing the driver and reinstalling
2. Have edited the registry in Windows to delete all references
The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
Hope you can help
Cheers
Dave W
Welcome to Discussions, Dave (dwinpenny)
I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
(1) Does this help you? http://kb.parallels.com/5028
(2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
http://xmeeting.sourceforge.net/pages/index.php
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

Text caption set up to display for all of slide

hello
i'm using captivate 5 and have another query.
is there a way to automatically set up text captions to display for the whole slide not a specific time? I know how to set this, but to go through and do this for every text caption is proving to be very time consuming.
look forward to hearing from you.

The Timing accordion of the Text caption could allow you to apply the setting 'For rest of slide' to all text captions (use the curved arrow, highlighted in screenshot), but the drawback is that this timing accordion also has the start time that will then be applied to all text captions, which is not always what you'll want. So for the example of the screenshot, all text captions would get a start at 4,5secs if I applied this setting to all.
If you want all future Text Captions in all projects to have the setting 'For rest of slide' make changes to the Preferences before opening a project.
Lilybiri

Use 21.5 inch mid 2010 imac as a display for 2013 macbook air?

I would like to use my 21.5 inch mid 2010 imac as a display for my 2013 macbook air. I tried using Screen Recycle, however I would prefer more of a monitor situation than a side-by-side extra screen situation. Ideally with my wireless keyboard and mouse. Does anyone have any advice, or am I asking too much from apple? Thanks very much.

Yes. With an Ethernet cable and a product such as ScreenRecycler.
(62511)

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

Can i choose the resolution of my external display for when the lid is closed when my lid is open

When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

Hi there, I had a similar problem and was unable to resolve it. I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck. It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

HDMI to TV as Display for New Mac Mini DOESN'T WORK

I bought a new Mac Mini and was told I could us HDMI to my TV as display.   I was using this TV as display for older Mac Mini (VGA) and for a Windows PC, and DVD via HDMI.     TV is one year old.
The Genius at the store who sold me the new mini said all I needed was an HDMI cable.   Which I purchased.
The screen comes up for the Setup Assistant but as soon I select continue is goes to gray, mixed color scanning garbage mode.    If I turn the TV off and back on, the screen returns (now at the next prompt in the setup assistant) but again it goes gray after hitting continue.    Unusable, CANNOT set up my new purchase.
Unfortunately, the DVI to VGA adapter on my old mini is different and doesn't mate to the HDMI to DVI adapter that ships with new MacMini, so I can't test VGA.   The old DVI to VGA has extra pins not on the new one.
My purchase is not usable and is extremely poor.   Buyer beware I guess.

I have been using MacMini's for commercial digital signage/video conferencing gateway usage for sometime now, they all have HDMI output, about one third are on Lion the others still on Snow Leopard, here's what I have found.
Toshiba & LG tv's are generally reliable, Samsung and Philips generally are not, Panasonic, Sony, Sharp & Viewsonic all work, somtimes with a bit of work from me.
Cables are important (always look for compatibility with HDMI revision 1.3 or greater (1.4 preferred), don't waste your money on exotic brands, adhere to the distance limitations, I generally send the HDMI signal wirelessly (cost of labor to add wiring to an existing space can be very high) so am limited to less than 50ft, same as with a wire.
READ THE TV MANUAL, find out what HDMI choices your tv possesses, is there a 'parallel' audio input available for the times when your signal origin is a MDP or DVI.
Some TV's just don't work well, cut your losses and get another when faced with this issue.

Can I use my iMac as a 'display' for my MacBook Pro?

Hi all, I am really hoping someone can help me here.
I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
Any suggestions would be really appreciated.
Thanks!

The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
Cheers
Rod

When I try to open the "markets" page on the Firefox hompage, it displays for 3 or 4 seconds and then drops off; I get a white screen; this does not happen with Explorer.

When I open "markets" from the homepage, it comes up but drops off after a few seconds and
I get a white page. This does not happen with Explorer. A similar but much more extensive
problem happened a month or so ago (I couldn't open attachments). I called Microsoft and the
fellow messed about with my computer for an hour or so, but ended up saying he couldn't help
me. However, when he went away, the problems went away.
== This happened ==
Every time Firefox opened
== two weeks ago?

~~red:'''''displays for 3 or 4 seconds and then drops off'''''~~
If you have RealPlayer Browser Record Plugin '''extension''', disable/remove the RealPlayer Browser Record Plugin extension in the RealPlayer Preferences (RP: Tools > Preferences > Download & Recording) . Restart Firefox and test.
See Noah_SUMO's illustrated answer in this thread if the above is not clear: https://support.mozilla.com/en-US/forum/1/557689?
The RealPlayer Browser Record Plugin '''extension''' adds some extra features like saving media files.
Be sure not to get confused with the RealPlayer '''plugin''' (Tools > Add-ons > Plugins) that plays media files.
https://support.mozilla.com/en-US/forum/1/557689?
http://support.mozilla.com/en-US/forum/1/459823
https://support.mozilla.com/en-US/forum/1/446905?
https://support.mozilla.com/tiki-view_forum_thread.php?forumId=1&comments_parentId=472596
http://support.mozilla.com/en-US/forum/1/461211
http://support.mozilla.com/en-US/forum/1/376867
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]].
~~red:'''''Other Issues'''''~~: to correct security/stability issues
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Update Shockwave for Director''': your version 11.0; current version 11.5
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
IMPORTANT: I have found it wise to always restart your system after doing anything with Adobe products.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''

Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.

Dear All,
Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents.
I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541
and after that i have created a Subcontracting Challan with the reference of the above created transfer posting
material document.
Now i need the Sub contracting challan number to be displayed in the Excise Tab of the transfer posting material document.
But if i display the Transfer posting material document in MIGO, the Excise Tab is not getting displayed.
Kindly help on this so that i can view the Sub contracting challan number in the display of the respective Trasfer posting material document in MIGO.
Thanks & Regards.

Pls confirm if you are following the SC process sequence :
u2022     Creation of Subcontracting PO, here in conditions tab maintain the price (Subcontracting charge) (ME21N)
u2022     Transfer Posting of Components to Subcontractor ( Movmt Type - 541) (MB1B/ME2O/MIGO)
u2022     Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01) - This challan will have the details normally company needs, in case client need more ... ABAPer have to develop customized smart form
u2022     Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
u2022     Reconciliation of Subcontracting Challan (J1IFQ)
u2022     Completion of Subcontracting Challan (J1IF13)
u2022     Generation of Annexure IV (J1IFR

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

How can I use my TV as a display for FaceTime and the camera of my MacBook when connecting it to the TV via HDMI?

I can connect my MacBook to my TV via HDMI and when I FaceTime everything works normally except I would like the display for the MacBook to be turned off so I can see video only on my TV. Closing the lid is not an option since I am using the MacBook's camera to FaceTime. Is there any way to achieve this?

Shivneet wrote: ... I would like the display for the MacBook to be turned off so I can see video only on my TV. ... Is there any way to achieve this?
Not that I could find.
The easiest workaround that I could find is a trimmed piece of Black Construction Paper taped over the Mac's display.
Alternatively, you could use an external Mac Compatible Web Cameras and then close the lid, but that is a higher cost option.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Displays for G5

Similar Messages

Maybe you are looking for