Disposition Contract in REFX

Dear RE experts
I want to enter an building disposition contract in REFX, which contract type i can use as reference for this type of contract?
After building was sold by disposition contract, if i link building to FI-AA, will the asset in FI-AA mark as disposal too?

Hi Howard,
I would recommend you use F-92 for the asset disposition. There are a lot of subsequent entries and impact on accumulated depreciation, loss/gain etc. this scenario is better handled by this standard transaction.
I am not sure if this scenario is handled in RE sales intrinsically. You may check on that too, if you have RE Sales in your landscape.
Regds
Hardik Sharma

Similar Messages

Activate Contracts in REFX

Hi,
how can i activate all migrated contracts in RE-FX?
can anyone help me?
thanks in advance.

Hi Tiago,
You can activate the contract while migrating only..
To Activate after migration use BAPI_RE_CN_CHANGE BAPI for mass Activations of contracts
in the IMPORT TAB
Pass "MCAK" to TRANS field.
and for doing manually for few records goto RECN Tcode under System status you can activate it.
Thanks
Veman.

REFX - customize installment in lease-out contract

Dear gurus,
I would like to customize installments for certain contracts in REFX, lease-out, and I just can't.
I see in the flow type customizing thta we can assign reference flow types with relation - 310 installment payment. I added a line 'reference 310, from flow type 1000 to flow type 1008'.
In ssignment of account symbol to flow type I customized flow type 1008 with debit and credit on customer.
in define doc type I added a line REPP (periodic posting) / REIS (installment) / 1008 / D5 (doc type).
Now, how does SAP treat this information when I post with RERAPP? What is this supposed to generate? How are amounts installed (split by periods)?
Thank for you help.
Benoit Fanna

Hi again,
In the end, does anybody know how to customize installments in REFX contracts?
Thanks

Problem in Activating Contract

Hi all,
I am creating Contract in REFX while creating contract I am activating the contract. It is showing the error "Activation is not possible due to warnings (Partner Assignment)"
Message no. RECN027
Can anybody help me in this?
Thanks in advance.
Shailendra

Hi all
Just had an upgrade and I am experiencing the same problem: Message no. RECN027
Activation is not possible due to warnings (Partner Assignment) when trying to activate the Contract in RECN.
Where in the Business Partner do I change the validation of the partner please
Thanks in advance
Gavin

REFX: display contracts without payment performed

Hello RE Gurus,
I wonder is there any possibility in REFX to display Contracts, which don't have payment for current date yet.
For example, I have 3 Commercial lease-out contracts with the same conditions and terms.
For the Contract 1 Customer have performed payment for the due date YYY, for the contracts 2 and 3 payment haven't been performed yet for the same due date.
I want to run some kind of a report, enter a due date YYY and see contract 2 and 3.
May be you will be able suggest me something? Thanks

Hi,
We will get some information using FBL3N and FBL5N..
By giving contract number against assignment we can get the postings:
We generally use:REISCDCF, FBL3N, FBL1N, FAGLL03 and KSB1 to know the status of contract wise postings.
Thanks and Regards,

REFX - LEASE IN - CONTRACT CASH FLOW ERROR :

Dear Experts,
I have an issue with REFX - lease in scenario.
For a ( RECN) RENTAL/ CAM contract we have filled all the required details correctly. ONE MONTH POSTINGS also done correctly FOR cam charges.
But now Cashflow is showing as “CAM CHARGES PAYABLE” ( reversal entry ) in simulation mode which is not expected.Due to this we are unable to make the postings.Attached screen shot FYI.
Can any one suggest to do needful. Kindly treat this as a priority issue.
Thanks,
N.S.Rao

Dear N.S.Rao
In your case, When your condition has been changed unit price or period, Cash-flow can be re-generated according "Assign Reference Flow Types" configuration as below ;
Relation                        Description                                   FlowType        Ref.FlowType
10           Follow-Up Posting due to Condition Increase               ZXX1                 ZXX2
20           Follow-Up Posting due to Condition Decrease             ZXX3                  ZXX4
so , If you want to control this re-generated or re-calculated condition item, you can configure this IMG.
Go to RECACUST >> Conditions and Flows > Flow Types > Assign Reference Flow Types.
and also, for your information, you can check 'Balance amount for your contract" according to use "Contract Screen >> Overview tab >> Account Sheet". then you can see entire financial document not only contract related posting but also customer/vendor and clearing document.
Many kinds of Financial Functions already applied to "Flexible Real Estate module" as a sub-functions.
Regards,
Jeong, Yeong Chul

SAP REFX - HOW TO RAISE PROFORMA INVOICE FOR CONTRACT

Dear Experts,
I am looking for a clarification WRT to REFX - lease in scenario.
Actually we are using REFX for paying RENTALS / CAM charges.....etc for the rental objects.
I would like to know if i want to Raise a Proforma invoice / Invoice based on the contract / postings, Is it possible in REFX / If yes Pls suggest to do needful.
Thanks,
N.S.Rao

Dear N.S.RAO
It's my pleasure for your help.
Please, try to check below items ;
   1) RERAIV (Invoicing Screen)
       - If you want to create the invoice for planned cash flow, you check the due date
         when you want to create the period and this contract must be activated
         on the system status.
   2) Configuration for Rent Invoice
       - Go to the IMG :
         RECACUST >> Accounting > Rent Invoice > Number Range for Rent Invoice
       - Go to the IMG :
         RECACUST >> Accounting > Rent Invoice > Company-Code-Dependent Settings
   3) Configuration for Correspondence
      - Go to the IMG :
        RECACUST >> Correspondence > PDF-Based Forms (Mass Print and Single Print)
                                > Forms > Define Forms
        (==> Form name : RE_CN_120, Try to change the form by "Smart-forms")
      - Go to the IMG :
        RECACUST >> Correspondence > PDF-Based Forms (Mass Print and Single Print)
                       > Correspondence Activities and Applications > Correspondence Activities
         (==> Correspondence Activity : T520 , Do not check the "Inactive")
For your information, I will try to my sample screen.
Regards,
Jeong, Yeong Chul

REFX mass contract deactivation

Hi everyone,
I'm looking for a way to deactivate 1200 REFX contracts. Is there something in SAP standard that can perform this kind of task ?
I looked into REFX transaction codes and BAPIs but found nothing.
Regards.
Nicolas

Hi Nicolas,
I've a situation similar to your posted question.
I'm looking for a t-code in SAP to deactivate RE contracts. Is there any specific t-code which I can use to mass deactivate the active contracts.
It will be a great help if you can share the t-code or BAPI to deactivate the active contracts.
Thanks & Regards
Shantanu Kar

Refx lease rental cash flow for non-cancellable contracts

Dear Refx Group,
As per Accounting Standard (AS) 19 - Leases, the lessee should make the following disclosures for operating leases:
a) the total of future minimum lease payments under non-cancellable operating leases for each of the following periods:
('i) not later than one year;
(ii) later than one year and not later than five years;
(iii) later than five years;
Is there any standard report or any methodology whereby we can get the above information.
Regards,
Sudhir Chattapan

Dear Refx Group,
As per Accounting Standard (AS) 19 - Leases, the lessee should make the following disclosures for operating leases:
a) the total of future minimum lease payments under non-cancellable operating leases for each of the following periods:
('i) not later than one year;
(ii) later than one year and not later than five years;
(iii) later than five years;
Is there any standard report or any methodology whereby we can get the above information.
Regards,
Sudhir Chattapan

Cash flow start date and first posting date in REFX-RECN contract

Hi,
While reviewing old contracts, I have noticed that in contracts where first posting date is mentioned, the cash flow start date is not editable in contract change screen. In contracts where first posting date is not mentioned, the cash flow start date is editable in the change screen.
Is this standard system behaviour? Because i have read in the forum that cash flow start date is not editable after first posting of the conditions.
I tried to change the field status of cash flow start date through RECACUST, but despite keeping the field status as display, the cash flow start date remains editable.
Please help on how to make the field status not editable.
sadhana

Hi Sidhharth,
Thanks a lot for your immediate reply.
I still have one query. You have written that
Where First posting date is not updated it indicates that posting of the contract is yet to be done,not a single posting has been performed hence Cashflow date is editable.
This means first posting date is always filled up after condition is posted. but in our system i find that the date is blank and greyed out even after the 1st posting.
Could it be due to having several conditions in the contract - some with one time posting, some with monthly posting? eg.most of our contracts have atleast two contions - one for deposit which is one time payment, one for rent. the first posting date is updated in individual condition for rent in conditions tab but first posting date in terms tab is blank. But even in single condition contracts, the first posting date is not getting updated in term tab (the field gets greyout out once contract is activated)
Thanks once again.
Sadhana.

Mass Activation of REFX Contracts

Hello
Is there any standard transaction code available to mass activate the contracts?
Regards
Rakesh

Hello,
On the selection of work list, what would i need to indicate on the Object state and registration reason for me to activate the contract for Selling?
Thanks

SAP REFX – Usage of (RECN - Condition Tab ) Formula : E1 – Percentage Share in a condition.

Dear Experts,
I would like have a clarification on the usage of Formula: E1 – (Percentage Share in a condition) for a contract type in Refx - contract ( In conditions Tab ).
Lets take the scenario as below for example :
Whenever I am adding a condition ZREN - Basic Rent : XXXXXX Rs/ month.
System has to pick a second condition ( Over head charges ) as default and it should be calculated 20% of the amount as overheads on BASIC RENT amount.
This 20% should come as default ( Because user cant change this % for anything while creation of contract).
So I have adopted the config changes as below.
SPRO - Flexible Real Estate Management (RE-FX) -- Conditions and Flows -- Default Conditions -- Define Default Conditions – selected my condition group – added new entries- assigned a new condition type as my over heads –
Unit price as – 20 %
Formula: E1
Formula Parameter: selected - BASIC RENT condition ( ZREN )
Is there any other config to be done ( Like adding the Derivation rules - if need Pls Clarify) to fulfill my requirement, B cas after doing above config my overhead charges condition is not flowing by default, even after manual insertion of Over head charges condition its not taking 20 % as default.( Its asking to enter manually).
Kindly advise to get the same.
Regards,
Subbarao.Narne

Hi Mr. Narnei,
If both the conditions are added manually, the condition with E1 as the calculation formula, say ZE1- Perc Share can automatically pick up the value from ZREN - Basic Rent and do the calculation.
For this you just need to specify the condition in the parameter field in the path: Flexible Real Estate Management (RE-FX) -> Conditions and Flows -> Condition Types and Condition Groups -> Define Condition Types. Also specified in the pictorial below.
For populating default conditions at contract creation based of different parameters, you would need to implement the badi BADI_RECN_CONTRACT. You can also add additional validation such as, if ZREN - Basic Rent is added to the contract it is mandatory to add ZE1.
Hope this helps.
Best Regards,
Hardik Sharma

Problems in assignment of a contract with several Items to orders.

Hi everyone,
I have a problem in SD Sales Document Processing :
I have a contract that contains 2 Items (with the same Material Number)
I want to assign this contract to multiple Orders by using the transaction 'VA02' :
Code :
CALL TRANSACTION 'VA02' USING bdcdata MODE 'N' UPDATE 'S' MESSAGE INTO wt_mess.
However, no allocation has taken place !
Table 'wt_mess' contains no error message !
It seems that assignment a contract to orders does not work if the contract contains several Items !
Does someone had the same problem ?
Thanks & Regards
Hassan Mounim

Hi,
I think u have activated the withholding tax for the whole contract. this can be done at the condition type level also in REFX. use the terms tab in the condition tab in the contract for the same. this should work.
Regards,
Deepak

REPORT showing the RE contract status

Hi All,
Is there any report/table in SAP REFX which shows the contracts status.
Regards
Sri

Hi Sri,
There are two types of statuses for a contract.
1. Contract Status: Concluded, Initial Term,Fixed term, Unlimited Etc.,, which you can see in REISCN- Overview of contracts report. just you need to add from the list into your layout.
2. System status: which shows Activated, Deactivated etc., which i dont think any report will show, but you can use the status selection screen field to filter contracts based on that status (you need to create Z status in customization).
Thanks,
bala.

RE FX module - loading the legacy contracts..

Hi REFX experts,
iam new to this module .
And i need to load the RE-contracts into the system.
1. Should i load all the PR bulk first.
2. Should i load all teh RO bulk firtst.
3. Should i load all the CN bulk first.
Or should i load in sequecne 1 PR first, next 1 RO next and 1 CN next ?
And next i know there are BAPI's
BAPI_RE_PR_CREATE,
BAPI_RE_RO_CREATE and
BAPI_RE_CN_CREATE
And my question is how to prepare the source files in what format for RE contracts ?????
TERM_RENEWAL_RULE     LIKE     BAPI_RE_TERM_RN_RULE_DAT
TERM_NOTICE_OBJ     LIKE     BAPI_RE_TERM_NT_OBJ_DAT
TERM_NOTICE_RULE     LIKE     BAPI_RE_TERM_NT_RULE_DAT
TERM_OBJECT_REL     LIKE     BAPI_RE_TERM_OBJREL_DAT
TERM_ORG_ASSIGNMENT     LIKE     BAPI_RE_TERM_OA_DAT
TERM_PAYMENT     LIKE     BAPI_RE_TERM_PY_DAT
TERM_RHYTHM     LIKE     BAPI_RE_TERM_RH_DAT
TERM_ADJUSTMENT     LIKE     BAPI_RE_TERM_AJ_DAT
TERM_SR_REPORTING     LIKE     BAPI_RE_TERM_SR_REP_DAT
TERM_SR_SALES     LIKE     BAPI_RE_TERM_SR_SL_DAT
TERM_SR_PEAK_SALES     LIKE     BAPI_RE_TERM_SR_PS_DAT
TERM_SR_RHYTHM     LIKE     BAPI_RE_TERM_SR_RH_DAT
ACT_DEPOSIT     LIKE     BAPI_RE_ACT_DEPOSIT_DAT
PARTNER     LIKE     BAPI_RE_PARTNER_DAT
OPTION_RATE     LIKE     BAPI_RE_OPTION_RATE_DAT
OBJECT_REL     LIKE     BAPI_RE_OBJECT_REL_DAT
MEAS_CN     LIKE     BAPI_RE_MEAS_CN_DAT
CONDITION     LIKE     BAPI_RE_CONDITION_DAT
RESUBM_RULE     LIKE     BAPI_RE_RESUBM_RULE_DAT
STATUS     LIKE     BAPI_RE_STATUS_DAT
EXTENSION_IN     LIKE     BAPIPAREX
RETURN     LIKE     BAPIRET2
TERM_WITHHOLDING_TAX     LIKE     BAPI_RE_TERM_WT_DAT
TERM_WITHHOLDING_TAX_ITEM     LIKE     BAPI_RE_TERM_WT_ITEM_DAT
COSETTLE_RULE     LIKE     BAPI_RE_COSETTLE_RL_DAT
TERM_PAYMENT_SPLIT     LIKE     BAPI_RE_TERM_PYSPLIT_DAT
Your answers are highly appreciated ..
Srinivas.

Hi Srinivas,
To Load Contract, you need to have higher Hierarchy object.
In Real Estate master data flow is some thing like this,
Business Entity (BE)
Building (BU)
Property (PR)
Rental Unit (RO)
Contract (CN)
BU and PR are at same level, Generally PR are used for Lease-In contract where vendors are used.
Now coming to your question,
You can Assign contract to any of Higher Hierarchy (BE, BU,PR,RU) it depends on the client requirement and Desgin.
IF you are working on Lease-In contract, (General Solution)
Create BE
Create PR and attached to BE
Create CN for PR
If you working on Lease-Out contract (General Solution)
Create BE
Create BU assign it to BE
Create RU Assign it to BE
Create CN for RU
Note:- In RE Classic you have lease-out and lease-in contracts seperately but when it comes to Flexibel Real Estate you have only contract and you differentiate it with Contract Type.
It Depends upon how your are giving input file to BAPI It can either
1. Tab Delimited Text file or
2. Excel File.. Etc
Below is sample format (Tab Delimited) input format for BAPI
XXX\000XXX0200011,1,500,100
XXX\000XXX0200011,2,CONTRACT,29991231,,20090101,20090101,,,6,0005750200011
XXX\000XXX0200011,3,,
XXX\000XXX0200011,4,,,,,,,,,,,,,,,,,08000290
XXX\000XXX0200011,5,,,,,1,1,,,,,0,1,0,
XXX\000XXX0200011,6,08000290,TR0600
XXX\000XXX0200011,7,IM,500/10001/00000011
XXX\000XXX0200011,8,,100,IM,500/10001/00000011,,,20090101,29991231,INR,INR ,,,,,,,,,100,,,,,,100
XXX\000XXX0200011,9,,,,,,,,,,
Cheers,
Veman
Edited by: veman goli on Mar 25, 2009 3:36 AM

Disposition Contract in REFX

Similar Messages

Maybe you are looking for