Dissolve from One Image to Another

I followed this tutorial:
http://flashexplained.com/banners/creating-a-flash-ad-banner-from-start-to-finish/
To create the banner ad at the bottom of the page. I've able
to do everyting except dissolve from the earth image to the flash
logo. I downloaded their sample file, and it looks like the flash
logo is a movie clip, on which he used a mask layer to create the
dissolve effect.
I don't know much about masking and haven't been able to
replicate the dissolve. Can anyone help me out?

Hi there,
If you put the logo on top of the earth I wonder if you
really need to use a mask (a mask is the part that it shows of the
layer underneath). Just a simple motion tween with changing the
alpha could be enough.
Try not to use the mask and see how it looks. After that you
can try putting a layer on top of the logo, change it to a mask and
put the shape that you want to show in the mask layer. After that
look at the movie again.
Greetings,
Guido
Creation site internet |
Jeux Gratuits |
Echantillon Gratuit |
Roue des Cadeaux

Similar Messages

  • How do I copy layers from one image to another?

    I am editing figures for a journal and I need arrows for multiple images.  Is there a standard arrow?  I can only see free hand.  If I use a free hand arrow I then want to copy it to the other images for consistency.  How do I copy or share layers between images?

    There are many arrows in the shape tool, or you can set the line tool to have an arrowhead in the tool options. You can copy/paste layers from one image to another, or drag a layer from the layers panel into the main image window of another image and then use the move tool to position it. You can also drag into the thumbnail in the photo bin, but you'll still need to bring the image up to adjust the positioning.

  • Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

    Good day!
    A simple Paste does not work for you?
    It should place the clipboard content as a new Layer which you can then move around.
    If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
    Regards,
    Pfaffenbichler

  • Paste from one image to another I get 'Paste Path'?

    Photoshop CS4  / Windows 7
    When I try to copy and paste from one image to another I get 'Paste Path' in the layers menu, but no pasted image appears. What have I done? - IM

    You probably have a path selected in the Paths panel in that image (or a Vector Mask active but that's the same thing). Go to the Paths panel and deselect the active path before copying

  • Replacing colour/texture from one image onto another?

    Desperately need some guidance here as this has been driving me nuts....
    I want to use the colour and texture from one photo onto my own design. Now, using the rubber stamp tool I am able only to clone a certain area that moves with the cross hair, but how can I clone a section from one photo and use that as a fill to create another design? In other words, clone a colour from one photo as a colour fill for another design?
    Even using the colour replace tool and selecting source: image I am left with the colour pallette as the destination and cannot use the colour from the image to paint my new image from it.
    Thanks a heap

    If I want to copy a single color from one image to another, here's what I'll do:
    Create a new rectangle in the source image
    With the rectangle selected, use the eyedropper to pick a color from someplace in the source image
    Copy the rectangle and paste it in the destination image
    Select the object I want to color and use the eyedropper tool to select the color from the copied rectangle
    (A layer with rectangles of different colors is sometimes handy for setting up a color scheme and using it consistently.)
    You can also create bitmap patterns to use as fills for vector objects. Fireworks comes with quite a few, but it's easy to add your own. Here are a couple of tutorials
    http://www.entheosweb.com/fireworks/patterns.asp
    http://www.peachpit.com/articles/article.aspx?p=30942&seqNum=4

  • How best to copy keywords from one image to another?

    Hey everyone,
    I can't seem to find a good, obvious way in Bridge CS3 2.1 to copy just the keyword tags from one image to another.
    I realize that one possibility is to create a metadata template for the source image and apply that template to the destination image, but this would be a cumbersome & lame workflow IMHO.
    I also realize that Bridge allows loading and viewing many images simultaneously, and that the same set of keywords can then be applied en masse. I'm sure many users like this workflow, but I'm not one of them. For one thing, this approach is seriously not future-proof. What if the user goes out and takes more photos that fit into those same keyword-categories that were applied to the image group?
    It seems to me that Bridge should allow the user to right-click on the list of applied keywords (at the top of the keywords pane) and see a "copy keywords" command. And then the user should also be able to right-click on an image and see a "paste keywords" command.
    Comments appreciated,
    Thanks,
    Brad

    There are many arrows in the shape tool, or you can set the line tool to have an arrowhead in the tool options. You can copy/paste layers from one image to another, or drag a layer from the layers panel into the main image window of another image and then use the move tool to position it. You can also drag into the thumbnail in the photo bin, but you'll still need to bring the image up to adjust the positioning.

  • Moving layers from one image to another in tabbed windows

    I don't know if it's currently possible, but I've tried every which way.  But I have 8 adjustment layers I want to move from one image
    to another in the tabbed window interface.  Once selected, COPY LAYERS is grayed out.  I tried to ALT + DRAG them to the image tab I wanted to move them to but it never focuses the tab and I cannot move the layers over.

    Well if I knew the feature exists in one way or another, I wouldn't have posted it in the Feature Requests.  It was because it seemed to be absent that I did.
    I enjoy a tab-less experience, however I abhor how PSCS5 handles non-tabbed documents in Windows 7 taskbar.  it opens a unique block for each open document you have.  So if I have 20 images open as I'm slicing up a design, I have 20 Photoshop CS5 blocks at the bottom.
    I don't like the Windows 7 "Taskbar Grouping" because when you click on Photoshop, it doesn't just go to Photoshop like it should, it instead opens up a menu for you to then select Photoshop (and focus it as wanted) or select an open image.
    These all seem to be steps backwards...

  • The float in windows option is grey and not accessable ? How can I copy from one image to another ? Elements 11

    The float all in windows option is grey and not accessible ? How can I copy from one image to another ? Elements 11

    You really are not getting this.
    "I guess I am still completely shocked that as a parent we can't download something for everyone to use."
    Why do you continue to think this although we keep telling you that this is not the case.
    You do NOT have to purchase anything twice.  You can share the music with as many ipods as you like in your household.
    The ipods are designed to sync with your computer regularly.  You should have been syncing these other ipods with your computer all along, thus transferring the purchases to your computer where that music can be synced to as many ipods as you like.
    Take on of the ipods with the music in it.  Open itunes on your computer.  Plug in the ipod.  Do not sync.  Click File>Transfer Purchases  This will transfer the purchases from the ipod to the computer.  Make sure that you have authorized your account on the computer:  here are directions for that. http://support.apple.com/kb/HT1420
    Unplug the ipod.
    Plug in the other ipod with purchased music.  Do not sync.  Click File>Transfer Purchases  This will transfer purchases from the ipod to the computer.
    You can now plug in any of the ipods, select what you want to sync and sync.
    Have a look at the manual for the ipod.  http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • How can I copy GPS information from one image to another?

    I bought a Canon S100 specifically for its GPs and movie capability.  On a recent vacation, I used the S100 and a Nikon D300.  In cases where images were taken with both cameras in approximately the same place, I would like to copy the GPS information from the S100 CR2 files to the D300 NEF files.  Does anyone know how to do this or if there is any plugins that will do it?

    The added benefit of using GeoSetter to copy the information from one photo to another, is that you can see where every already-tagged photo is on a Google map to make sure the location is actually correct.  Sometimes the camera clock is off a few seconds or minutes and you can easily figure how what offset to use by watching where the existing photos show on the map.
    Using the MS Pro Photo Tools to generate a track from the existing S100 photos and then using that track in GeoSetter to assign the rest, with interpolation enabled, seems like the best course of action if the S100 track information is no longer available.
    When using an external program to Geotag images that are already in LR, to be safe you should first save all the metadata to XMP files in the folder you’re going to tag, then exit LR, then geotag the photos, then restart LR and read information from all the XMP files.
    Another benefit of GeoSetter is that you can assign the locality information to the photos that already have just coordinates in them.

  • Copy effects from one image to another

    Hello folks,
    Using PS CS4 -
    I know I've seen this somewhere, however, I can't find out where in the searches.  Here's the setup and question, I played a tutorial on creating a sketch effect on an image that looks really cool and I'd like to duplicate these effects on other image files.
    In the .psd, I've done some of the following; duplicate the background, desaturate, duplicate layer, invert layer and so-on.  There's about 8 or so things done and I'd like to copy / drag these effects to another image.
    How do I do this and can I do all at one time?
    Thanks,
    Captain

    If you want to perform the same set of steps on multiple images:
    Record an action while performing the steps on an image.
    Play back the action on another image.
    If you want to copy Layer Effects from one place to another:
    In your Layers panel, right-click on the layer you want to copy the effects from and choose Copy Layer Style.
    Now go to your target document, right click on the layer you'd like the effects to be on, and choose Paste Layer Style.
    -Noel

  • I have a dual monitor setup.  When I paste develop settings from one image to another, Lightroom switches the active window.

    Strange problem.  Lightroom 5.5.  Windows 8.1. Dual monitor setup.
    I'm processing a large batch of photos.  I have Monitor #1 set as my main develop window, with Monitor #2 set only to display a larger version of the image I'm working with. If I copy the develop settings off of one image and try to paste them onto another image, Lightroom will switch from Monitor #1 to Monitor #2 as the main develop window, and will not display anything on Monitor #1.
    If I then try to paste develop settings onto another image on Monitor #2, LR will then display a larger version of the image I'm working with on Monitor #1.
    To work the way I want to, I have to continually drag my develop window back to Monitor #1 every time I try to paste develop settings onto a new image. How can I make this stop?

    I just tried what I think you’re saying you’re doing and I don’t have the problem with LR 5.5 on Windows 7 SP 2.
    Does the same thing happen whether you use the key shortcuts vs the Settings / Copy/Paste options on the menu?
    I ask this because if you’re using the keyboard shortcuts, maybe you have some display-manager program that has bound itself to the Ctrl-Shift-V (paste settings) to the function of move-to-other-monitor which would do at least part of what you describe.
    You can also test this theory by doing a Ctrl-Shift-V with an application other than LR as the active window and see if it moves.  I suppose Ctrl-Shift-C might also play into it so try both of these hot-key combinations with a program that isn’t LR.
    If none of this sheds any light on the situation, then give a more detailed description of the low-level functions you’re doing to accomplish the copy-paste of settings, so someone else could replicate the steps exactly.
    Specific detailed steps, like:
    left-click on source photo’s thumbnail in the filmstrip
    press Ctrl-Shift-C to copy the settings
    click Check-None
    enable the white-balance and calibration checkboxes
    click Ok
    left-click on destination photo's thumbnail in the filmstrip
    click on Settings / Paste Settings in LR’s menus to paste the settings to the selected photo

  • Transfer layers from one image to another??

    Hello,
    i've created an image with some layers. How can i transfer that image with all its layers  into another image?
    Thanks!
    btw i use CS4

    the_wine_snob wrote:
    John,
    A question for me - with the CS4 tabbed images layout, does one have to tile the images, or can one just drag to the tab for the destination image?
    Thanks,
    Hunt
    From the day CS4 appeared, with its strange bland interface and non-standard behaviour I turned tabbed windows off and have never let them back.
    So I don't know.

  • Copying a background color scheme from one image to another

    I have a banner I created off the web that has red with a kind of white tint in the middle and is gradient to the corner with black tint. Can some one tell me is there a way to copy this color scheme in the from the banner and apply it to a logo image I have so that they match.
    thank you in advance

    Can you show us the image? Also, what exactly do you mean by:
    copy this color scheme

  • Can you copy a build action from one image to another?

    Hello - is it possible to set up a build action for a shape/image and then copy these attributes to another shape/image? I tried to use copy/paste styles however this did not work.
    I need to replicate the same path/build sequence many times over many different objects and I do not want to have to recreate many times.
    Thanks in advance.

    There is no way I know of to replace an object with another object. If you have images, you could create a single object, copy it, and use the "Image Fill" of the object to place the images "inside" it -- if the object is not stroked, it will look like the image, and not the original object, and if it has transparency, like a PDF, those transparent areas will remain transparent. (Note that you can also create PDF images of Keynote objects themselves using the Preview Passthru technique.)

  • How to copy from one image to another

    Hi, I'm struggling with the most basic process in PSE 10. I have selected an area in a photograph - now I want to delete the rest of that photograph and add the selected area as a layer to another photograph. Having spent hours searching online, I'm hoping someone can give me an answer please.
    John
    Message type was edited by: Brett N

    Hi Barbara, I can't explain this but it seems to be working now, even with the Tiff format.  I'm doing exactly what I was doing before - selecting an area on the photo, then pressing edit - copy.  Before I was getting an error message, but now I can copy the selection into another Tiff.  I must be doing something different or I must have changed a setting - I have no idea what, but the problem seems to have gone away. If only every problem was that simple! 
    The upshot is I can now edit in both Tiff and PSD and am really delighted with the help I received from this forum.  I know they were very basic questions, but sometimes those are the hardest to answer.
    Many thanks to everyone who responded, John

Maybe you are looking for