Distance from wireless router too close??

I have a WRT54GX4 and access from anywhere in my house or outside is not a problem....except when my laptop is on the same desk and about 18 inches away. I have a tough time acquiring a signal, and when I do, I usually lose it.
Is there such a thing as being too close to the router? The only things nearby are my desktop monitor, a corded phone, desktop PC's speakers, printer, and a joystick.
The problem is easily solved by using a cable, but I would prefer not if I could change something.
Thanks in advance.

- Change channel to 11... good frequency for wireless devices near each other.

Similar Messages

  • My wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting etc, doesn't help

    my wifi-connection stops by taking some distance from my router, let's say 4 meters (12feet) reseting network setting, etc, doesn't help!
    any suggestions?
    jonathan

    neuwerld wrote:
    Ohh thanks guys!
    It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
    So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
    haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
    But again, really thanks!
    /Neuwerld
    that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself.  with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
    also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background.  that way openbox comes up immediatly and only a second later you've got your panel and monitor.
    all this after .xinitrc and before openbox

  • Best wireless router too share Verizon Wireless USB720 connection?

    Our connection with Verizon Wireless via USB720 modem on an older Imac keeps dropping because we us that via airport to connect 2 other Macbooks. In research, I guess it's because airport and EVDO share a similar RF. Anyway, I need a wireless router for the USB720, and I don't have a clue where to start. What's the best router? Am I going to have to install the VZ Manager for the USB720 on the router, via the Imac?

    check out the 3G/cellular routers from Cradlepoint.
    The best one for home use is the http://3gstore.com/MBR1000 because of its WiFi N wireless range.
    You won't use/need VZAM. you connect via airport or ethernet cable to the MBR1000

  • Steps necessary change from wireless router to direct connection to the Imac

    Want needs to be done to move from a wireless router to the modum direct to the computer, if currently using a wireless modum and router?

    Right, I should have added that, thanks.

  • Any danger from wireless router radio signals?

    A friend of mine has some concern that the transmissions/radiation from a wireless router in the home could be harmful to his 5-year old son.
    Two questions:
    1. Is there any merit to his fear?
    2. If he installs a router but uses only the wired ethernet connections (and makes no use whatever of the wireless capability), will that eliminate all wireless radio transmissions from the router?
    Thanks much.

    Hi wildsky! In a way, yes there is some truth to his fear. Any electronic device ( it's not true to routers only) can create its own EMF ( Electromagnetic Field). When exposed to it for a long period, it can become harmful to one's health.
    If he has wired devices only and doesn't really need the wireless function of the router,  he can disable that feature. He just need to access the setup page of the router to do that. It would depend on the model number of the device though as some wireless routers do not have that option.

  • Is it distance from my router than causes a greying out of web sites

    the router that gives wirelessness to my desktops is about 50 feet and in another room
    from my bedroom. the web page listings of any search are greyed out and are not
    workable.
    Is there a distance issue here?
    cant be cos i also use cellular data which shows up on the upper left with 4 bars
    and still the pages are locked, cant be clicked on
    any ideas whats going on
    the ipad2 32 GB with 3G

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HPC8180 Printer wont connect to wireless network, after firmware upgrade to Wireless Router

    My HPC8180 has been connecting wirelessly since I bought it sometime ago.  I recently had to upgrade the firmware on my Netcom NB9W wireless router and since then my HP wont resolve to the wireless network.
    I run the Wireless Network wizzard on the printer, select the correct SSID and enter the WEP key as per instructions.
    It then will not connect.
    The summary I print out says it passes everything except:
    No Filtering = Fail
    Connected = Not Run
    Signal Strength = Very Low (which is strange because it's about 10ft from Wireless Router).
    Other networks detected matching your network name (SSID) = No
    Summary says:
    Network Name (SSID) altnet (correct)
    IP Address = Not applicable
    Configuration Source = Not applicable
    Communication Mode = Infrastructure
    Authentication Type = Open System
    Encryption = 64-bit WEP
    I have NOT turned on mac address filtering
    Any ideas??
    This question was solved.
    View Solution.

    Your router appears to be a DSL modem router.  Those can be tricky to connect to.  Also, WEP can be problematic and is no longer a good security measure.  WEP can be broken in about 10 minutes with freeware from the internet.
    Let's do three things:
    1. Change to WPA or WPA2 encryption.  You can make up your own password.  Make it 13 or more characters, numbers and letters, upper and lower case.
    2. Reset the Network Defaults in your printer (Setup > Network area).
    3. Attach to the router in this way:
    Sometimes DSL providers have more control over the router than the printer likes.
    - Unplug the telephone line from the router
    - Turn the power off on the router, wait 30 seconds, then turn the power back on.
    - Go through the normal process of connecting the printer to the device (Wireless Setup WIzard)
    - Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
    - On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address).
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Leave the gateway and DNS blank
    - Finally, plug in the phone line, reboot the router and test.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • Calls garbled or dropped when standing too close to wifi router

    I'm having a problem with dropped calls that I could never figure out. Until I finally noticed the pattern. It seems that whenever I'm close to my Linksys router (even though I'll have full bars) my iPhone 3G calls will start to get a bit garbled. It sounds like the signal has bad reception. In a few cases all of the voices literally start to sound pretty close to a fax machine, you can still make out that there is a voice, just can't understand it. Once the "garbled" effect gets going it's a pretty sure thing that the call will be dropped, despite a full signal.
    I finally noticed that this only happens when I'm at my computer desk, near my wireless router. If i'm anywhere else in the house, or for that matter, away from the house, I've never had a problem with a dropped call. The only other item that I suspect could have an interference effect is the Wacom tablet. I've noticed that certain wireless mice loose signal when they're too close to it. But I'd be surprised if that signal would be reaching out 2 to 3 feet.
    Any thoughts?

    I think I'd try some settings in the router.  Experiment with channels on the 2.4Ghz band.  Try a low channel number.   If you have 5Ghz capablity try it.  Some routers also have a transmit power setting, if it's set higher than 100% then lower it.  If you don't need range, consider lowering below 100%.
    Just some ideas,
    Regards,
    Captfred

  • I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).

    I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).
    On the Iphone and Apple TV I can connect to Netflix . . . it recognizes me and my account settings . . . and I can veiw all my recent programs and show titles, descriptions, etc..  But when I select one to watch I get a message saying:
    "ERROR A PROBLEM OCCURED WHILE PLAYING THIS ITEM. TRY AGAIN LATER, OR SELECT A DIFFERENT ITEM. GO TO WWW.NETFLIX.COM/SUPPORT FOR MORE INFORMATION. (139)
    Netflix support say there is nothing wrong on their end . . . that it is an Apple issue.  They see the request for the show, the devices are registered . . . but it shows 0 bandwidth to the device.
    My Apple TV did this when I first hooked it up a couple of weeks ago.  Then after a few days started working with Netflix, for no apparent change . . . now doesn't again for the past couple of days (I think that it auto restarted the other night after a virus scan).
    Very frustrating, and driving me nuts!  Has anyone else had and been able to resolve this problem?

    Troubleshooting
    Apple TV2 update one day and netflix is browsing but not launching the actual content (error 139)
    Ipad2 (another ios device) forces me to update netflix if I want to use it and I get the same error 139 on it.
    **** now I have two not ways not working where prior to some update it was fine.
    Nintendo Wii is still working ( mind you running an ancient version of netflix )  Dusted the Wii off and gave it to the kids use.  Now they are happy again...
    PC is also still working ( using some other flash client ) but that's just of interest, we're not going to be watching tv with that.
    My wife's iphone 4s is still working.  Odd.. still ios but for somereason I am not forced to update the version. So basically she could mirror stream up to the apple tv with it.  Nice feature of Ios5.  Later found out it is using 1.4 version of netflix.  The most useful thing out of that is that all 3 of the devices are Ios and it was actually the iphone with the 1.4 version of netflix that still worked!
    I heard from a friend who was on a different ISP he was still working so I took my appletv2 and ipad2 over to my brothers house who is on that same ISP as my friend and both started working.  So the ISP is involved too!
    Brought the appletv2 and ipad2 back to my house hoping it would maybe still work.  No dice   Broken again.
    Searched the appstore for a decent packet analyzer and there isn't really anything.  I was able to sniff the traffic with my PC and also on my juniper ssg5 confirmed that.  Turns out port 80 traffic is actually failing and authorization is not happening.  The other clients do not do this...
    Asked a buddy from work who used to work at the ISP if he could make a call to some one who might actually know what is going on.  He came back pretty quick and said yea they are trying really hard to get the beta patch in from Bluecoat asap. 
    So knowing that it was actually Netflix that changed when it hit 2.0 and in my case the ISP made the adjustment it's pretty safe to say this issue is going to be ongoing unless netflix changes again the way they authorize for licenses.
    So that's the summary of what went right down the troubleshooting path but I'll tell what what didn't
    2 calls to Netflix (useless... waste of time... they are too quick to blame anyone but themselves)
    1 call to apple support (support call was going to cost more than it cost for me to change ISPs)
    2 calls to ISP (through the normal means - regular support number)
    So why is this intermittantly working sometimes?  If you are lucky enough to authorize to an IP address that is not cached they voila you are going to get an authorization / a license to watch the show.  Some people report after defribulating their appletv (reseting, rebooting, dns changes, you name it) they get it working.  Over the past month we all seem to have got it working for some period of time only to lose it a day to two later.
    It's now been several days since the beta patch to the bluecoat and 4 of us who have been communicating on the issue appear to be online all at the same time for those several days and that is a good sign that we might be out of the woods on the issue.
    Hope this turns into something helpful for someone else out there.

  • Cannot see Mac Mini Server from Internet: DynDNS alias gets thru cable modem to wireless router, not to the Mac Mini. How to configure?

    I want to make my Mac Mini Server (Lion) visible to the Internet from my home LAN. I have followed the Lion server install wizards and also set up a dynamic DNS at DynDNS.com.
    When I enter the Internet address with the proper alias from a web browser, I get dumped into the admin screen of the Linksys wireless router WRT300N. Hint: the WRT300N provides DHCP for the LAN, not the cable modem providing DHCP. The WRT300N has DDNS service set up. NAT and RIP are disabled. The Mac Mini DHCP is reserved.
    Suggestions? I could use the Motorola Surfboard SB6121 to provide DHCP but have hesitations.
    Point me to the right discussion/article and get me back on track, please.

    This sounds like a simple port forwarding issue, but I don't understand your LAN setup.
    The WRT300N has DDNS service set up. NAT and RIP are disabled.
    The chances are, you're running NAT somewhere in your network. If not the WRT then what? If it's your cable modem then you must have port forwarding configured on the cable modem, and that's where you need to focus - change the port forwarding to point to your Mac Mini's address rather than the WRT.
    HOWEVER, it is far more common to have the wireless router perform NAT and DHCP, which is why I question your setup.
    Not directly related, but:
    The Mac Mini DHCP is reserved
    Nix this. Your server should be configured manually, with a static IP address, not DHCP, even with a reservation in the DHCP server. The only advantage of DHCP is for dynamic hosts (hence the 'D' in 'DHCP') or if you expect to change your entire local subnet on any kind of frequent basis. The reality is that you can't just change the IP address of Mac OS X Server like this - there are too many dependencies, so it's better to set it manually, knowing that there's a cost (and pain) to change the server's address.

  • Apple TV distance from the wifi router

    I have an apple tv that works great in the living room. I have a smart tv in the bedroom which is about another 20 feet from the wifi router. The smart tv has a weak signal. Do you think the Apple tv would work better? the total distance would be about 60 feet from the router.
    thanks

    If you have a Mac, you can stand next to your SmartTY and run Wireless Diagnostics ( About Wireless Diagnostics ) and Command+2 to look at signal strength etc. Here is an example.

  • Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

    My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
    Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
    Who can tell me what does this error message mean and how to elinate this error message ?  also how to deal with 100% CPU utilization ?
    Thanks.

    Hello,
    i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
    also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
    when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
    i also have a could of questions if anyone can help
    the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
    is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
    thanks in advance.

  • Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router.  can I use my Airport Extreme as wireless router?

    We currently have the following wireless home-network configuration, powered by Verizon DSL. 
    2 macbook pro’s
    1 emachine
    HP PhotoSmart 6122 all-in-one printer
    Apple TV
    Apple Airport Extreme Base Port A 1408
    Westell 7500 router
    Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port.  The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
    We now want to change from DSL to cable, thus ditching Verizon.  Our new cable provider supplies the cable box, but no router for wireless networking. 
    Here are my questions.
    Can I use the Airport Extreme (AE) as a wireless router? 
    If so, how should I hook it up?  Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
    If not, how should I be using the AE to some advantage?  What can I get out of the investment?
    Thank you very much for your help!  Beatriz

    What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
    Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

  • I have a new macbook pro hooked up to a belkin wireless router. My HP officejet printer is also connected to the router. I cannont get the printer to work from my computer without restarting my computer evertime I want to print. How do I fix this?

    I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome

    Mac OS X 10.7 Help: Troubleshoot a network printer

Maybe you are looking for