Distorted Audio-Captured too loud through mixer

I have a video that has a man speaking and most of it is distorted. It sounds like he is mumbling. The problem occured because the audio was captured too loudly through the mixer. I have tried different filters but none have seemed to work. I have also done the tutorial mentioned on a lot of these discussions. If you have any idea of what to do please help me out.
Thanks,
Micah Wooten

If the audio was recorded that way to begin with then your pretty much screwed. You said it was "captured" too loudly. If that's the case then you could recapture.

Similar Messages

  • Audio way too loud...it seems?

    I imported a track into FCP however it seems significantly louder than my vox pops.
    When I bed it down below my vox pops it seems to drown them out. I have lowered the tracks level to -32db which seems excessive, and on my meters its barely visible but it continues to be heard.
    I usually have my backing audio at around -22 to -18 but this is just way too loud, not sure why this is or how to improve it without lowering the levels massively?
    Should i go by the meters or my ears?Any help would be great

    At what level are your vox pops sitting on the meters? They should be hovering around your reference level (usually -12 or -18dB).
    If you've got very low level on your recorded audio, and you've then turned up the speaker volume to compensate then an imported CD track will be deafening.
    First confirm that the vox pops are sitting at a sensible level on the meters (peaking at around 6-8dBs above your reference level) then adjust your speaker volume to be comfortable, then adjust the imported track's level so that it sounds right under the vox pops.

  • 39L1350U Audio is too loud

    I've got my volume down on 1 and its plenty loud.  Anyone else notice this?

    I created this account specifically to post this issue, at least I am not alone.  This is kind of ridiculous how loud the TV is at 1.  Is there a solution to this?  I've been fiddling with audio options and turning off some of the advanced features does reduce the overall sound a titch but it's not good enough. 
    Some people like to watch Television and not have a movie theater experience while they fall asleep.

  • Volume too loud. Mixer always resets to 100%.

    Using:
    Windows 7 64bit.
    Firefox 19.0.2
    Flash Version 11,6,602,180
    My volume in flash defaults to almost horrifying levels. In the mixer I tone it down but every time I close firefox it resets itself back to 100%. When I go into flash settings there does not appear to be a volume slider anywhere. The only thing I can see is a mic slider.
    The easy answer would be to turn my system volume down but for my computers multiple uses it is impossible to find a "happy medium". Each of my programs has seperate settings except for Adobe Flash Player which I cannot seem to find or get to work in the mixer. Any help would be greatly appreciated

    Bump, still not fixed.
    Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=3590220

  • Distorted audio in iTunes and other apps after 10.8.4 ?

    Hi
    Listen. After i installed the latest 10.8.4 i have distorted audio in iTunes and other music applications.
    I have tested this on 3 mac's all with the same result. distorted audio when playing loud
    Anyone else got this new problem after installing 10.8.4 ?
    I already filled in a bug report to Apple at https://bugreport.apple.com
    We need to get this fixed NOW... Please write your situation if you discovered the same bug.
    Thanks.
    Have fun.
    Erik

    Ask on the Microsoft forums, as it's their software you're having problems with:
    http://answers.microsoft.com/en-us/mac

  • Headphones too loud.

    Does anyone else think the music plays too loud through headphones? I find that it is too loud when set at the lowest possible volume to comfortably listen to in a quiet office. Am I just crazy? Never had this problem with my ipod.

    try to go to settings; ipod; sound check; switch it to on. This may help you.
    Mathew

  • Sound too loud and distorted from capture

    It seems that for some reason when I capture video from my Sony PD170 DV camera, that the sound captured is way too loud on the timeline, even though it reads acceptable on the waveforms and the green lights that go up and down.
    My last capture an hour ago, from the timeline, the sound was crakely listening through the computer speaker and headphones. I then listened through headphones directly from the original tape in the camera and it sounded ok.
    Any suggestions? A problem with the compouter or a setting I need to adjust in FCP for capturing video?
    At System Preferences/Sound the input volume is at half set from the internal mic.

    I tried a capture from a friends camera and FCP system. Same problem on time line. Random pencil thin blank spots on the audio wave form. So it must be on the tape. Maybe bad tape, electronic interference in recording room or some camera problem recording. Used two separate wireless lavs. Drop-out in exactly same place on both channels could rule out room interference because of different frequency lavs.
    I did short analogue test copy from PD170 to Trv-900 and it eliminated the drop-out. So I am now making full copy to substitute in time line.
    I also think that the sound coming in with the capture is too loud and that's the possible problem, but can't figure how to change the level on a capture. Even though the waveform and meter after capture look ok, it still seems pretty loud. The audio control in the Log And Capture/Clip Settings is greyed out at 1.

  • AUX IN too loud on minimum mixer sett

    I have an ES37/ES373 SoundBlaster card. Even with the built-in Windows mixer recording volume set to minimum, the input through AUX IN is WAY TOO LOUD. Mute cuts it off completely. Is this not a logarithmic volume control (audio taper)? I should expect to be able to smoothly adjust to zero volume using the slider on the Recording AUX IN volume slider.
    What gives? Is there a workaround? Different Mixer software?

    That will be some settings adjustments on your computer (e.g., volume control or volume management) and not on your MDR-1R headphones. You may contact the support provider of your computer for best assistance.
    If my post answers your question, please click on "Accept as Solution."

  • CS6 - how do I adjust audio level part way through a clip using audio mixer?

    Hi there - I'm using the trial version of CS6 and will almost certainly buy it. I've watched lots of the video tutorials but am stumped on this simple issue!
    1. Let's say I have a clip and I want to increase the audio level part way through a clip.
    2. In Example A below I have added a keyframe at the point I want to change the volume.
    3. I then went to the audio mixer and increased the volume level using the slider. But nothing changed on the clip.
    4. The only way I could get it to work was to add more key frames after the first one (see Example B) and increase the volume on the timeline.
    5. This is very fiddly and I'd prefer to be able to do this using the audio mixer. Is this possible?
    Example A                                                                                                              Example B

    With the proper Send settings (Write, Touch, etc., as Craig mentions), you can easily ride the Volume in real-time. I like to add a Numbered Marker to where I want the adjustment to begin, hold, and then end, so that I have several visual clues, besides the aural ones.
    I also have found that the default setting for Audio>Minimal Time Thinning Interval places too many Keyframes on the Track, so I have bumped that up in Preferences.
    Also remember, the Keyframes added with Audio Mixer are Track Keyframes, and not Clip Keyframes. If you were to remove all Clips, those Keyframes would still be there, and would affect any Clips that you added back.
    Good luck,
    Hunt

  • Mac audio TOO LOUD after rebooting Mac

    After rebooting a PowerMac G4/500 (AGP) with Mac OS X 10.4.6 sounds too loud (as if it was at top highest volume) when playing audio files, even though the audio setting (keyboard audio keys) is set to only one to three points. Just clicking such keyboard audio buttons (to lower or even increase it) fixes it and the audio returns to its correct volume. What is going on? This is driving me nuts!
    Thanks.

    Justin,
    Thanks. I have done as indicated, shut down and booted, yet the issue persists. For instance, if I go to iTunes and play a song, it plays very loud, yet the audio is set at a single point. I can see it clicking the keyboard audio keys. As said, once I click any of such keys (increase or reduce volume any amount) the audio returns to its normal volume until the next time that I boot the Mac. This is a 100% consistent issue. Weird.

  • I have a MEX-BT4000P Bluetooth Audio System. The subwoofer is always way too loud.

    I have a MEX-BT4000P Bluetooth Audio System.  The subwoofer is always way too loud, even when the volume is turned way down.  I need to know how I can reduce the bass for the subwoofer.
    Thx, Scott

    Hi Scott! Are you using the rear speakers as subwoofer? If yes, you can adjust the Rear Bass Enhancer (page 34 of the manual).
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • Iphone 5c audio too loud

    I recently bought a headset BHS-930 by phaiser and the audio is way too loud whenever I try to play anything and there's no way to adjust it even at 1 on the iPhone 5c it's I can hear whatever I'm playing without even having the earpiece in my ear. This only happens when using it with my iPhone if I pair it with my laptop the volume level is fine but when I pair it with my phone the volume is so loud anyone sitting near me can listen to whatever is coming out of the earpiece. Is there anyway to fix this?

    I would've done that if it was too loud for more then just the iPhone. I can pair it up with my laptop and the levels are fine, it's just on my iPhone that it too loud.

  • Lumia 630 dual sim in call audio too loud

    In call volume is too loud on my lumia 630. Can't change the volume. It shows its changing but nothing happens! Any solution?

    You may try to reset your phone software using the Nokia Software Recovery Tool. To download and guidance on how to use the application, you may check this link. Hope this helps. 

  • Distorted audio during playback

    has anyone else had the problem of distorted audio in itunes. when i play a song on itunes, it's totally distorted, as if the output level of is too loud. even when i turn down the volume fader, the audio is still distorted. i play the same tracks through quicktime and they're fine, so it's definately an itunes issue.
    can anyone help?
    thanks
    simon

    Hey Simon,
    I've had this issue since iTunes went to version 7. I believe it may be tied to the original DRM scheme Apple used and is using. I don't know about you, but I have no issues with iTunes Plus purchases and if I rip my own CDs. Otherwise, all of the non iTunes Plus downloads distort. If I'm correct, you may see this thread vanish in the near future. I think this is potentially a huge issue when you consider a billion downloads, or however many Apple is up to now.
    Chris

  • Audition automatically makes volumes +15db, distorted audio

    Yesterday I started mixing a session, all went well, I saved & closed it.
    But when I opened it again today, it put the audio of all of the tracks (in the multi-track) at +15, and also put every track at +15.
    Even when fixing everything back to 0, the audio is way too loud and sounds distorted. (and if you save it and open it again at this point, next time everything will be +15 again)
    It also does this with EVERY session.
    If you listen to the individual tracks in the single track editor, it sounds fine, so there must be something wrong at the multitrack.
    Help please?

    Bonjour,
    mon PC est en Windows 7 en langue française avec un lieu France, AU 6 est en français.
    Hier, j'ai contourné le problème. J'ai désinstallé iCloud.  mais j'ai conservé iTunes et QuickTime, après cette opération l'utilisation de AU6 était redevenue normale.
    JCV

Maybe you are looking for

  • DVD Player no longer supported ?

    After a clean install (now on OSX 10.0.4), my DVD Player is not supported in my classic environment ? It no longer autolaunches and I cannot even manually launch it ! Be very grateful for some advice. G3 iBook 500   Mac OS X (10.0.x)  

  • Error in Creating New Web Application SharePoint 2013

    Everything was working fine but today when i try to create  a new web application i am getting the following error.It's happening whenever i am trying to create a new web application. The directory C:\inetpub\wwwroot\wss\VirtualDirectories\26060 is a

  • I selected iTunes as default player and now I can't hear anything playing

    I've tried everything in the help menu and just can't get anything to re-set so that I can hear what it is that I am choosing to play. This is really frustrating. I would go back to Musicmatch, it seems like when I selected iTunes as the default play

  • About ALV Footer

    Hi All        How to create ALV Footer.I would like to print two types. Each page want to ALV Footer and another report in required Last page only. Thanks & Regards hari

  • File Exists on Internet

    I can use Test-Path to find out if C:\Test.csv exists or not How to find out if a file exits on Internet, eg. http://www.domain.com/test.csv ?