Distorted audio when using BlueTooth with Samsung i500 Vehicle Mount

The audio is severly distorded using a bluetooth headset while the phone is plugged into power using the Samsung i500 Vehicle Mounts built-in power port.  The only workaround I have found is to flip the phone around and plug power directly into the phone instead of the Samsung i500 Vehicle Mounts built-i power connection.  This issue has been reproduced using different i500 Vehicle Mounts, different USB power cords, and within differnt cars.  There doesn't seem to be anyway to get the distortion to go away except to not use the built-in power port on the mount.  Please let me know if anyone knows a fix for this issue.

Yeah, the built-in audio connector on the Vehicle Mount also doesn't work.  When I bought my mount there was a little sticker over that connector that said it wouldn't work until Verizon updates the fascinate to version 2.2.  However, nothing I saw indicated that using the built-in power connector would cause bluetooth audio distortion.  So at this time I just put my phone into the mount backwards and plug the usb power chord directily into the phone instead so that the bluetooth audio quality is ok.  When I want to get sound on my radio I just plug an audio cable from the sterio into the phone's headphone jack.  Oh and I might as well add that if I get a call while I have the audio cable plugged into the headphone jack there is no way for anyone to hear me when I answer the call.  So I have to unplug the audio cable before answering the call.  Unfortunately, I've found that when an audio cable is plugged into the headphone jack, the phone disables speakerphone and bluetooth.    Let's hope they get these issues fixed when they roll out the 2.2 software update.

Similar Messages

  • Sony MDR-1RBT headphones have crackling or pops in audio when using bluetooth on my iMac - Mountain Lion

    I notice crackling noise or pops when I listen to music using my Sony MDR-1RBT bluetooth headphones with my 3.4GHz Intel Core i7 iMac running  OSX 10.8.5
    I do not hear the crackling when I listen to the headphones using my MacBook Pro 2.7GHz Intel Core i7 with OSX 10.8.5
    I also do not hear the crackling when using wired connection to the headphones.
    So it would seem that something with the Bluetooth on the iMac is the problem. But I have no idea how to troubleshoot this further.
    Does anyone have any ideas what the cause may be?
    I am pretty sure that it is not interference from another device because I can connect to my MacBook Pro in the same area as my iMac with no crackling

    Hi Michael Erb1,
    Thanks for using Apple Support Communities.  It may also be worth resetting the NVRAM of your iMac to see if that helps with the crackling:
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    - Ari

  • When using iPhone with Ford automobiles' Sync, the connection drops each time the ignition is shut off. In order to restore, the bluetooth must be turned off on the iphone, then restarted. Any suggestions?

    When using iPhone with Ford Automobiles' SYNC, the connection drops each time the ignition is shut off. To restore, you must turn off the bluetooth on iPhone, then restart each time. Any suggestions?

    There is an update avaialbe for Ford systems to correct bluetooth problems. You need to update your system.

  • HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro

    no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • Error 80 when using bluetooth on car radio

    error 80 when using bluetooth on pioneer car radio with my iphone 4 and 5

    me too...did some digging on the internet and appears Error -80 means the car deck is expecting some bluetooth protocols that your iPhones wont give out.  mine was intermittent for last couple years (deck is 12 years old) as of last night i just get error -80 everytime i try to dial out or recieve a call via bluetooth. this issue was intermittent with an iPhone 3G, 4, 4S, 5 and now my current 5S.  im blaming Pioneer not Apple for this
    I ended up buying a new deck for my car...gets installed tomorrow.

  • No audio when using FaceTime on iPhone.

    No audio when using FaceTime on iPhone. The video works, but just static is heard during call. I have attempted multiple calls to another iphone and my mac. Should I send the phone in for repair?

    Hi Anne-Lill Holme,
    Thanks for visiting Apple Support Communities.
    If you are not being heard during FaceTime calls on your iPhone 6, I recommend starting with these troubleshooting tips:
    Restart your device.
    If using FaceTime over a Wi-Fi network, go to the steps to resolve Wi-Fi network issues.
    From:
    iOS: Troubleshooting FaceTime
    Next, I recommend testing your iPhone 6 microphone in other applications, such as Voice Memos. 
    If you cannot be heard on recordings in other apps, see this article for additional troubleshooting help:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    Best Regards,
    Jeremy

  • Siri sounds bad when using Bluetooth

    Siri sounds bad when using Bluetooth, but the phone calls sound great.

    Can a few of you help me with a test? I have a Jawbone 2 & a Jawbone Icon. Both exhibit a strange behavior with my iPhone 4. If either of these headsets are on, paired & connected AND a call is answered or initiated, things are fine.
    When it all goes downhill is in this scenario:
    My headset is OFF. I receive or make a call and mid-call, I decide to turn on the headset (which I keep off to save battery). The Jawbone connects and automatically switches the iPhone from PHONE to JAWBONE. This is all normal right? Okay here's the problem. The call quality has static, sounds muffled and the caller tells me I sound like I'm in a tin can. If I then switch back to the phone (through the iPhone page of Sources) and then back again, to the Jawbone, most times--quality is back to normal. Obviously this is not something we all want to be doing. Can anyone do this test with their headset .. any brand and even some of you with Icons? It would be good to know if the culprit is the Bluetooth Headset or the iPhone. Remember, it's important that you make a call with your Bluetooth headset in the OFF position and then turn it on mid-call to use it.

  • HT1688 iOS7 and connecting calls when using Bluetooth device

    After upgrading to iOS7, it takes a long time to connect a call when using Bluetooth in my car. Worse of all, when checking voicemail, the message does not come across the Bluetooth device even when audio device output is selected as Bluetooth device. Any solutions to this problem?

    Hi, eklinck. 
    Thank you for visiting Apple Support Communities.
    Sometimes closing all applications open in multitasking and power cycling the device can resolve the issue.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    However, if you are still experiencing the issue I have included the best troubleshooting article.
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    Cheers,
    Jason H.

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • How can I use Bluetooth with another devices?

    How can I use Bluetooth with another devices?

    You can set up your FaceTime account in Settings > FaceTime.

  • Best practice when using Tangosol with an app server

    Hi,
    I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
    However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
    Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
    If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
    Best regards,
    /Per

    Hi Gene,
    I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
    If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
    Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
    Still confused,
    /Per

  • Display "blank-out" when using Maya with a GF 7800?

    I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
    My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
    I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?

    OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
    The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
    I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce.

  • How do you turn off Flash audio when using captivate Nav bar?

    Hi Guys and Girls
    I have an imported flash file that plays an audio track,
    I have no problem turning the audio off, when the user uses
    the button within the flash file to go to the next slide in the
    captivate movie...
    on(release){
    stopAllSounds();
    _root.rdcmndNextSlide = 1;
    BUT if the user decides to use the navigation bar within the
    captivate movie it all goes pair shape.. The flash audio continues
    to play into the next slide. Anyone have a know how to solve this
    problem?
    How do you tell flash to stop playing the audio when using
    the captivate navigation bar?
    (The flash file is a flip book and the audio NEEDS to stay
    within the flash file)
    Cheers
    Aquil0

    Thank you! Thank you! Thank you! This totally solved my issue. I had a Captivate 4 movie using an embeded animation that had audio. It would play the audio again when the next slide appeared. I have to use Captivate 4, because my audience still uses Flash 7 (yikes). However, if you have Captivate 5 and are having this problem there is a widget that solves this issue: http://blogs.adobe.com/captivate/2010/11/animations-%E2%80%93-audio-sync-issue.html#commen t-3872
    Thanks!
    EliteEraser

  • HT201335 I can only get audio when using airplay through sky go on my apple tv on iphone 4

    I cn only get audio when using airplay through sky go on my apple tv on iphone4. Any ideas?

    Sky go is an app that does not support video AirPlay, not all apps do.

  • My iPad pairs using Bluetooth with my android phone but I ca't get it to connect

    i can get my iPad to pair using Bluetooth with my android phone but I can't get it to connect

    What are you trying to accomplish by pairing them? File transfer over BT is not supported.

Maybe you are looking for

  • How to setup a default value when defining (prompting) for a value?

    When I prompt the user in a SQL statement then I can declare a default value like in: SELECT * FROM all_users WHERE username = nvl('&myvariable','SYSTEM'); But when I define a variable this does not work: define tablename=nvl('&tablename','test123')

  • Monitor Output, for 24p

    Hey all, So my set up is like this.... Firewire cable to Camera (Deck) to S-Video to Sony monitor. Now what I've noticed, that if I edit something thats 29.97 frames it will play back on my monitor, but anything that is 24p or 23p... won't play as a

  • NI-DAQmx frequency sampling rate

    Hi there! I'm working on setting up a data acquisition Labview VI, to measure different signals on a test rig. I'm using the NI-DAQmx assistance (the Express VI?) to continously measure analog signals (Variable current, voltage and temperatures). Thi

  • Weblogic Server not picking the jar files in WEB-INF/lib folder

    we are facing a strange problem where Weblogic App Server is not picking the jar files present inside the WEB-INF/lib folder if we update the jar file path in the classpath of the start script then the classes get loaded properly. Is there any specif

  • .PPTX attachment won't send in Bulk Email in CRM 2011

    Hi, When i attach a 2mb .pptx Powerpoint Slide attachment my bulk email fails. I have checked the email tab in System Settings and it's set to 5mb. Any ideas what might be preventing the emails from sending? Thanks David David Kelly