Distorted / choppy recorded sound with Audigy 2 ZS and Vista 64-bit

Hi, I wonder if anybody has any idea of why this issue is happening. First let me give you my PC specs:
CPU: AMD Phenom II X4 940 @ 3.0 GHz
Mobo: Gigabyte GA-M57SLI-S4 rev. 2.0
Graphics: 2 x BFG GeForce 8800 GT 52MB
RAM: 4 x GB G.Skill PC6400 @ 800 MHz
Sound: Creative SB Audigy 2 ZS
TV Tuner:? Hauppauge WinTV PVC PCI II (26xxx)
OS: Windows Vista Ultimate 64-bit SP
?So here's the deal. I have no problems whatsoever with audio playback with this sound card. The issue I am having is while recording sound with it. When I record my voice via a Microphone with the Windows Sound Recorder and then play it back, my voice sounds very choppy. It sounds as if I was talking in front of a fan. The same happens with any program I try to use. If I use Audacity to record sound, the playback is also distorted / choppy. The main problem is with Skype, as I cannot use it to talk to people because they cannot understand what I'm saying because of the issue. Does anybody has any ideas why this happens? My PC is a dual boot PC with Vista 64-bit and XP 32-bit, and this issue only happens with Vista. Sound recorded plays back fine under Windows XP.
I am using the latest drivers available for this card from the Creative site.
I'd appreciate your help,
Daniel

StormPetrel wrote:
A little bit off topic here, but 64bit does not mean more performance at all lol.
Sure, but there are in some cases drastic performence diferences. Under a fresh installed Vista X64 i have less CPU usage, as under 32 bit. But of course X64 uses more RAM (some tasks are double 32 and 64 bit).But the main reason I have more performence is, that the games I often play, get almost a boost. Dont ask me why, but under 64 bit EAW and FOC have the same FPS as under 32 bit. But under X64 I use a bit more Details and a higher resolution. (both are 32 bit games, so its a bit funy )?______________________?Sure there are other ways to install the drivers. But if some Setup dosent work, the first thing I try is to get it via Divice Management. And as this worked for me, I dont waste time to try other methods (Had bad experience, you can break the driver faster than install it *G*)?______________________?Some Questions I have left (after a few hours undr X64 with Creative Drivers):?Could it be, that the driver causes sometimes havy CPU usage?Could it also be, that the driver causes some lags, after you copy a file (the end sound, copy is finihed, but takes more time for "final finish", than without the drivers) - I know that Vista has some problems, on some PCs with copy, and that MS has an inoficial Patch (but dosent help for my PC so far)

Similar Messages

  • No rear speaker sound with Audigy 4 and Vista x64

    I recently upgraded to Vista x64. I downloaded the 6.0..24 driver for x64. I also loaded MediaSource for x64. I am using analog 5. surround speakers from Dell. This setup works fine when I boot into XP pro (with the XP drivers), but I only get front, center and Sub in Vista x64. Does anyone have any ideas for this?

    Not sure what to tell you, hopefully someone will be able to help. One curious thing though is that according to my Sound properties in Control Panel SPDIF is working on my Audigy 4,
    <center>
    http://i0.photobucket.com/albums/a7/stormy352/th_spdif.jpg">
    </center>
    unfortunately I don't have anything that uses SPDIF to be able to test it.
    Also have you tried installing the X-Fi drivers yet? Download, extract with Winrar (or whatever you use) and navigate to the Drivers sub-folder and run the Setup.exe there.

  • No sound with Audigy 1 and Vista Ultim

    Ok.. so I know you cannot use the SPDIF output on the x64 version... so I installed the reg x86 version and I still cannot get the sound to work on my Audigy with my old DTT2500 5. creative speakers..... Is there some setting that I am missing?... While playing an MP3 I am able to see the green bar move up and down on both the Speaker output and SPDIF output but neither of them produce and sound... speaker test works perfect as does my normal XP boot.. please help.. thanks in advance.

    Not sure what to tell you, hopefully someone will be able to help. One curious thing though is that according to my Sound properties in Control Panel SPDIF is working on my Audigy 4,
    <center>
    http://i0.photobucket.com/albums/a7/stormy352/th_spdif.jpg">
    </center>
    unfortunately I don't have anything that uses SPDIF to be able to test it.
    Also have you tried installing the X-Fi drivers yet? Download, extract with Winrar (or whatever you use) and navigate to the Drivers sub-folder and run the Setup.exe there.

  • SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

    (ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
    CONTINUE ON-
    Download RAR file with ISO inside and install if you don't have the installation CD
    installation cd with EQ download: http://files.filefront.com//;689430;;/
    If you do or after you finish downloading goto step A.
    A) Take your Creative Driver/Install CD, copy it to your hard dri've.
    B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
    C) Set it for Windows XP SP2.
    D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
    E) Restart when told to
    F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
    G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
    Message Edited by jeepbme on 03-08-200708:50 PM

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Big Problems with Audigy 4 and Vista 64

    Hi there,?I got the Audigy 4 running under Vista 64 Bit. The onboard Soundmax, connected to the speakers in my?Monitor?is acti've, too. The Audigy is connected to a 5. System from Teufel. With XP64 all ist working fine: The systemsounds come out of the monitorspeakers and the sound generated by mediaplayer etc. come from the 5. Sytem.Under Vista it is not possible to get a fine sound from the 5. System - if something is working, then only the satellites are working. The subwoofer is quiet. Also the sound from the 5. system is very bad, with a lot of breaks and so on. What?s this? How can I resolve this problem?By XP64 I have the possibility to change settings in Mediasoucecenter ... here I got nothing... rgds?McInternet?

    I'm running the Audigy 4 with Vista 64-bit and it's working okay for me. It's not great - and it's pretty substantially crippled, but I'm getting sound. I would love to have proper EAX support and just some simple bass and treble controls, but it is working for me (using the March 9th drivers).

  • Record Audio with Captivate 2 and Vista

    I'm using Vista 32-bit and I can't record audio.
    Is there any Idea, who to fix the problem?

    The fix even fixed my set up which is Captivate running on
    Vista home running on VMware Fusion running on an Intel Mac.
    quote:
    Originally posted by:
    CatBandit
    I know that. I wasn't clear, and do apologize for that. I
    meant that the microphone or video card wasn't working
    with Captivate, not that they weren't working at all. This
    has been a problem for some time, specifically with regards to some
    USB Mic setups, and with "RealTek" audio cards. In those cases, a
    fix" (patch) has been made available.
    The fact that you can record and playback in other programs
    has nothing to do with this little bug...
    The fix I referred to above is available
    at
    this link
    . I hope this helps!

  • Problem with version 8 and Vista 64 bit?

    Hi. I have just bought a new PC and seem to be having a problem. When I start iTunes I get this message
    "Warning. The registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes"
    I have not installed any other burning software and have tried to re install iTunes but still get the same message. Any ideas? Software currently installed is:2007 Microsoft Office system Version 12.0.6331.5000 *
    Acrobat.com *
    Adobe Acrobat Version 9.0.0.2008061200 *
    Adobe AIR 1.5 Version 1.5 *
    Adobe Reader Version 9.0.0.2008061200 *
    Agatha Christie - Death on the Nile Version 1.1.0.22 *
    Apple Inc. - Bonjour Version 1,0,5,11 *
    Apple Inc. - iTunes Version 8.0.2.20 *
    Apple Inc. - QuickTime QuickTime 7.6 (1292) *
    Apple Mobile Device Service Version 2.12.33.0 *
    Apple Software Update Version 2.1.1.116 *
    ArcSoft, Inc. - PhotoStudio Version 5.5.0.93 *
    Belarc, Inc. - Advisor Version 7.2x *
    Canon IJ Driver Uninstaller Version 1.4 *
    Canon IJ Utility Uninstaller Version 1, 4, 0, 0 *
    CANON INC. - CNSLMAIN.EXE Version 1, 2, 0, 0 *
    CANON INC. - Easy Guide Viewer Version 1.0.1.0 *
    CANON INC. - MP Navigator EX Version 2, 0, 0, 0 *
    CyberLink - DZM Version 2.00.0222 *
    CyberLink - PowerStarter Version 6.00.2111 *
    CyberLink Corp. - HP DVDSmart Version 2.0.1.2213 *
    CyberLink Corp. - HP DVDSmart Version 5, 0, 0, 0 *
    CyberLink Corp. - HP MediaSmart Music Version 2.0.1.2217 *
    CyberLink Corp. - HP MediaSmart Photo Version 2.0.1.2217 *
    CyberLink Corp. - HP MediaSmart Video Version 2.0.1.2217 *
    CyberLink Corp. - LabelPrint Version 2.5.0.0904 *
    CyberLink Corp. - Power2Go Version 6.0.0.2112 *
    CyberLink Corp. - PowerDirector Version 7.00.2202 *
    CyberLink Corp. - StartMen Application Version 1.00.0613 *
    CyberLink MediaLibray Service Version 2, 3, 2203, 0 *
    CyberLink PowerCinema Version 2.0.1.2217 *
    EasyBits Software AS - Magic Desktop Version 1.0.0.0 *
    Enable HP Product Improvement Data Collection *
    HelpLaunch Version 1.0.0.0 *
    Hewlett-Packard - HP Health Check Scheduler Version 3.1.9.1 *
    Hewlett-Packard - HP Health Check Service Version 3.1.9.1 *
    Hewlett-Packard - HP Installer Version 8,5,0,70 *
    Hewlett-Packard - HP MediaSmart Version 2.0.1.7 *
    Hewlett-Packard - HP Software Update Client Version 4, 0, 12, 1 *
    Hewlett-Packard - HP Total Care Advisor Version 2.4.5106.2815 *
    Hewlett-Packard Co. - hp digital imaging - hp all-in-one series Version 082.000.188.000 *
    Hewlett-Packard Co. - hp digital imaging - hp all-in-one series Version 111.000.006.000 *
    Hewlett-Packard Company - HP Solution Center Version 074.000.017.000 *
    Hewlett-Packard Company - HPEasyBackup Version 1.0.0.1 *
    Hewlett-Packard Company - hpsysdrv Application Version 2.00.00 *
    Hewlett-Packard Company - LightScribe Version 1.14.25.1 *
    Hewlett-Packard Development Company, L.P. - HPSysInfo Application Version 9.5.1.0 *
    Hewlett-Packard, Co. - HP PhotoSmart Essential Version 1.12.0.46 *
    HP Color LaserJet 2600n Version 1, 0, 0, 1 *
    HP Easy Backup Button Service *
    Intel Corporation - RAID Event Monitor Version 8.6.1.1002 *
    Intel Corporation - RAID Monitor Version 8.6.1.1002 *
    Intel(R) Matrix Storage Console Version 8.6.1.1002 *
    Macrovision Corporation - InstallShield (R) Version 10.50 * Macrovision Corporation - Software Manager Version 6, 0 *
    Microsoft (R) Windows Script Host Version 5.7.0.6000 *
    Microsoft - Kbd Stub Version 1.0.9.1 *
    Microsoft Application Error Reporting Version 12.0.6211.1000 *
    Microsoft AutoRoute 2004 Version 11.00.18.1900 *
    Microsoft Clip Organizer Version 11.0.8164 *
    Microsoft Corporation - digital locker assistant Version 1.6.5 *
    Microsoft Corporation - Internet Explorer Version 7.00.6000.16386 *
    Microsoft Corporation - Office Diagnostics Service Version 12.0.6211.1000 *
    Microsoft Corporation - Office Diagnostics Version 12.0.6211.1000 *
    Microsoft Corporation - Office Source Engine Version 12.0.4518.1014 *
    Microsoft Corporation - SelfCert Version 11.0.8164 *
    Microsoft Corporation - Windows Defender Version 1.1.1600.0 *
    Microsoft Corporation - Windows Installer - Unicode Version 4.0.6000.16386 *
    Microsoft Corporation - Windows Version 1.0.0.1 *
    Microsoft Office 2003 Version 11.0.8164 *
    Microsoft Office Document Imaging Version 11.0.8166.2 *
    Microsoft Office InfoPath Version 11.0.8161 *
    Microsoft Office Isolated Converter Environment Version 12.0.6211.1000 *
    Microsoft Office OneNote Version 12.0.6316.5000 *
    Microsoft Office Outlook Version 11.0.8217 *
    Microsoft Office Picture Manager Version 11.0.8161 *
    Microsoft Office Save My Settings/Profile Wizard Version 11.0.8161 *
    Microsoft Open XML Converter Version 12.0.6211.1000 *
    Microsoft Visio Version 11.0 *
    Microsoft® .NET Framework Version 2.0.50727.1434 *
    Microsoft® .NET Framework Version 3.0.4506.648 *
    Microsoft® Works 9 Version 9.07.0613.0 *
    muveeReveal Version 7.0 *
    NOS Microsystems Ltd. - getPlus(R) Helper Version 1.2.0.7 *
    NVIDIA Driver Helper Service, Version 175.78 Version 7.15.11.7578 *
    OsdMaestro Version 1, 0, 0, 5 *
    PC-Doctor, Inc. - Hardware Diagnostic Tools Version 5.1.0.0 *
    PhotoSuite Version 9.4.3.0 *
    Quick Tour *
    Recovery Manager Version 7, 0, 91, 13 *
    Research In Motion Limited - Desktop Tools for RIM Handhelds Version 4.7.0.32 (Release build by unknown) *
    Research In Motion Limited - RIM Handheld Communications Manager Version 4.3.1.15 (Release build by unknown) *
    Shop for HP Supplies Version 2.1.3.0000 *
    SoftThinks - Application CD Creator Version 7, 0, 91, 61 *
    Sonic Solutions - CommonSDK Version 9.0.0.93 *
    Sonic Solutions - CommonSDK Version 9.4.4.1 *
    Sonic Solutions - MediaCapture Version 9.4.3.0 *
    Sun Microsystems, Inc. - Java(TM) Platform SE 6 U7 Version 6.0.70.11 *
    Symantec Core Component Version 1.9.2.84 *
    Symantec Corporation - Firewall Component Version 3.0 *
    Symantec Corporation - LiveUpdate Notice Version 1.5 *
    Symantec Corporation - LiveUpdate Version 3.4.1.234 *
    Symantec Corporation - Norton 360 Version 2.0 *
    Symantec Corporation - Norton Protection Center Version 2008.8.00 *
    Symantec Security Technologies Version 107.0.6.4 *
    WildTangent, Inc. - GameConsole Version 1.0.0.1 *
    WizLink Application Version 1, 0, 0, 1 *

    Did you download the 64 bit version of iTunes? It should download automatically, but it might not.
    If you have the right version of the installer you should have 64 in the name IIRC it is called iTunes64setup.exe.
    This the same as 32 bit iTunes but it includes the 64 bit drivers for burning and the iphone.
    If you got the wrong installer, there is a link to the 64 bit installer on the download page but it is not obvious. The link is in the box lower left under "Windows software"
    http://www.apple.com/itunes/download/

  • I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

    I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

    Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

  • How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

    How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo  and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no  effects is going thru?

    Hi Life93,
    What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
    See this thread on how to remove the audio from a clip in iMovie -
    Is there a way to separate audio from a video c...
    https://discussions.apple.com/thread/1779767
    To add audio from GarageBand use this article -
    iMovie '11: Add a sound clip to your project
    http://support.apple.com/kb/PH2255
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My iphone 4 microphone won't record sound on video clips and doesn't work with Skype

    This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.

    I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.

  • Recording Options with Audigy

    Hello:?I have recently purchased and installed an Audigy SE card into a PC running Windows Vista Home Premium 32 bit edition.
    Does this card support a "What You Hear"/ "Stereo Mix" recording option?.
    ?I?purchased the card?as an?upgrade from my on-board sound processor, as the Vista drivers available for it'sdo not work properly. I previously used my system under Windows XP Pro to broadcast as an internet DJ and this option is necessary for me to contine. Any suggestions would be helpful. Thank You.

    I recently upgraded my XP system with Audigy SE to Vista and found that I could no longer record from the stereo mix. Here's what I did to fix it.
    I went to Control Panel, Sounds, and under the Recording tab I right clicked and selected Show Disabled Devices. "What U Hear" showed up, but even after enabling it, it still said "Not Available". So I went to Creative and downloaded the latest software/driver pack for Vista 32-bit (dated 9 Jul 07) and installed it. After installing and rebooting, I went to Control Panel/Sounds again and tried to find "What U Hear". It was not there at all, even after telling Vista to show all disabled devices. No stereo mix, no nothing. Nice update.
    So I kept the new Audigy software installed but I rolled back the driver to the original Vista driver, which was dated Feb 2007. I went back to Control Panel/Sounds and lo and behold, "What U Hear" was back. However, it was still labeled as "not available". So now I did another reboot.
    I went back to Control Panel/Sounds and looked for "What U Hear", and this time it was available. So I selected it to be default and loaded up Sony SoundForge to give it a test, and it worked. I could record from the stereo mix by selecting "What U Hear" in Soundforge as my recording device.
    So, in summary, the July 07 Creative update for Audigy SE in Vista 32-bit seems to be missing this key capability, for whatever reason. However, the built-in Vista driver for Audigy dated Feb 2007 does allow it. By coincidence, Creative also has a Feb 2007 driver update listed in their downloads -- is this the same driver supplied by Vista? I don't know. Maybe it is, but now that I have things working, I'm not going to mess with it to try and find out.
    So my advice -- get the latest software pack from Creative but use the February 2007 Vista driver, or try the Creative February driver.

  • Recording sound with Soundbooth

    I managed to record sound with the system 'sound recorder', but when I try to record sound in soundbooth with the same mic (simple cheap mic) there is nothing showing on the meter and nothing records. Can somebody please explain to me what is the problem?

    While Premiere and Soundbooth both support a Windows audio standard called ASIO, both also include a driver that will let you use audio devices that do not support this format.  The driver is configured by default, but may not always select the proper input port - depending on the audio device and what Windows reports to the application.
    Fortunately, it's not too difficult to tinker around and find the right setting.  In Soundbooth, choose Edit > Preferences > Audio Hardware...  In the dialog that pops up, you should see a drop-down labeled "Default Device"  If you are running Soundbooth CS4, you should see "Soundbooth 2.0 WDM Sound" listed here.  Click the Settings button, and in the new dialog, click the "Input" tab.  Here you'll see a list of input ports for your selected audio device.  Make certain your microphone port is enabled, and click OK a few times to get back to the main program.  Click the Record button and make sure the microphone input is selected in the Port: dropdown.  Try recording and see if this solves the problem.
    If it still does not record, or you do not see the proper input to enable, you may need to verify the proper audio device is selected, or if you're running Windows Vista, that the input port you want to use is enabled in Window's Audio settings.  You can find this by right clicking on the speaker icon in your system try and choose "Recording Devices."
    Good luck!
    Durin

  • IMovie not recording sound with iSight image

    In system preferences > sound, I have Built-in microphone selected. But Audacity won't record sound (never works anyway) and iMovie will record image from the iSight, but no sound.
    What am I missing?

    You're welcome. After further investigation, not only does the volume in the system preferences affect the mic, the actual "voice over" (microphone icon) does as well, even though I'm recording with iSight and not, specifically, a voice over.
    However, fantastic YouTube video diaries or whatever they're called must be done on a PC or a Mac that knows how to shut up. If there's one thing right now that's about to make this computer fly through the air, it's the fans that rev up to 6000 and even an external mic picks up the noise. Not much I can do about it. Maybe Snow Leopard and iLife '09 solved the issue.

  • No sound with Flash 15 and Windows 8

    No sound with Flashplayer 15 and Windows 8.  I have followed the steps to enable the program and to disable Active X filtering and still no sound.  Sound works on all other applications.
    The Adobe website instructions refer to a way to troubleshoot sound that cannot be followed -- see the inserted text below -- it refers to an application below and there is no application shown on the page.
    Can someone please help?
    How do I test my speakers?
    Click Test Speaker in the application shown below to hear a sample sound. Adjust your speakers or headset so the sound is at a comfortable level.
    How can I display this panel again?
    You may want to display this panel again if, for example, you want Flash Player to use a different microphone. To display the Microphone panel:
    Right-click (Windows) or Control-click (Macintosh) the application image while it is playing. 
    From the context menu, select Settings, and then click the Microphone tab. 
    I don't see the Microphone tab, so I can't display this panel.
    If your computer or device doesn't support audio recording using Flash Player, you cannot select a microphone to use, and this panel doesn't appear.

    Hi
    Is the sound card recognized properly in device manager or can you see yellow exclamation marks there?
    I have founded an interesting article on the Toshiba website regarding no sound:
    http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm
    By the way: You can also mute/unmute the sound if you press FN+Esc. Check this!!!

Maybe you are looking for