Distorted (flicker and lines) video on first gen MacBook Air

I just had my harddisk replaced by the local Apple Store two weeks ago. Aside from the absurd experience of not being able to keep my harddrive, everything seemed fine. About four days after the replacement, the screen started acting funny. There are subtle horizontal lines that form on the screen that cause either flicker or blurring. They are not wide; they are not constant; and, they are not pleasant. Interestingly, I think the lines move with scrolls -- that is, they seem to be a screen buffer issue, not a screen issue.
Does anyone know how to fix this? I don't have the time, the patience, or the money to take this poorly built machine to the Apple Store yet again.

I have the same problem with my MacBook Air. When applying pressure (using the palm of my hand) on the back of the screen (where the illuminated apple is located) pushing the lower center of the case and the display would normalize. Therefore, I was able to localize my issue to a problem with the *LCD LED LVDS Cable* versus the display or the display's connector.
I determined this after removing the bezel from around the screen (it is held together by two side tape - no screws) and manipulated the LCD LED LVDS Cable until the video image was restored.
I do not know if this is your issue. However, based in the fact that your computer had the hard drive replaced; I would remove the bottom of the case in order to verify that the LCD LED LVDS Cable is securely plugged into the motherboard.
One other possibility is that there is a problem with the video chip.
Paul

Similar Messages

  • First Gen MacBook Pro and no firewire 800. Suggestions for capturing video?

    My first gen MacBook Pro only has one Firewire 400 port and nothing else (I got in a argument with a mac store clerk regarding the truth of this statement). My external hard drive has one Firewire 400 port, two Firewire 800 ports, and 1 USB. So far as I know the standard for most video cameras are still Firewire 400, in which case daisy chaining is out of the question (considering I will be using that port to connect to my computer). Any suggestions on how to capture video straight from a deck to my external hard drive?
    Thanks!
    MacBookPro1,1   Mac OS X (10.4.9)  

    I think you can use a FW800/400 adapter and daisy chain your camera to the drive.
    http://www.amazon.com/Sonnet-FireWire-800-Adapter-FAD-824/dp/B0000CDJPQ

  • Will my first gen macbook work with ipad 2's face time?

    will my first gen macbook work with ipad 2's face time?

    As an update, I bought the WNDR3400v2 router and am supremely disappointed with its lack of power - but - the Lenovo W510 DOES work perfectly fine connecting to both the 2.4Ghz and 5Ghz radios.
    The problem is the signal strength only twenty feet away up one floor is dismal (as compared to what it was with the ancient Linksys WRT54G for example).
    What bothers me is that Netgear goes to great lengths to hide the power output of the radio so I 'suspect' that it is anemic and I don't (yet anyway) suspect the radio on the W510 laptop. Netgear support would only tell me the EIRP at 2.4GHz is 20dBm, and at 5GHz it's double that. So I can only assume the power output from that. If I assume a 5dBi antenna gain for both frequencies, that results in a power output guesstimate of 15dBm (32mW) at 2.4GHz and double that at, i.e., 18dBm or 64mW, at 5GHz.
    The other side of the equation, of course, is the power & gain of the W510 radio & antenna.
    Do we have specs for the W510 power output & antenna gain (e.g., a typical laptop is about 50mW (roughly 15 to 18 dBm)  pushed into an antenna with a gain of about 1/2 dBi to about 1 dBi at best, regardless of what the specification sheet intimates)?

  • Third Party Wireless N Upgrade for First Gen MacBook

    I have a first generation MacBook that can only run on the wireless g standard. When the MacBook Core 2 Duos came out, they could take advantage of the new wireless N. Those of us with the first gen MacBook couldn't upgrade.
    Then I ran across this product from FastMac.
    http://fastmac.com/ncard
    I think it just came out.
    Has anyone tried it? Think it would work? Anything I should be worried about?
    They offer a DYI option. How hard could it be to install? They can install it also for $$ (90?).
    Your advice is welcome.
    Thanks.
    macbook 2.0ghz white   Mac OS X (10.4.7)  

    Note if you do it yourself, any warranty resulting from problems afterwards will have to come from Fastmac. If you are under AppleCare, I don't think it is worth the trouble.
    I'm not guessing as to how Apple will handle warranty issues. But logic dictates that's how it would be based on reading the AppleCare Service Agreement. This smells of "unauthorized modification." I could be wrong, but don't come crying here if your machine overheats, or something else bad happens. Fastmac will need to offer support.
    You can get a WiFi 802.11n enabled Wireless Access Point with gigabit ethernet (not from Apple, as Apple's 802.11n base station uses 10/100 ethernet) that will hook up to the MacBook and provide the same speeds.

  • New Airport Extreme to First Gen MacBook Pro Losing Connectivity

    I just purchased the latest Airport Extreme and am having severe issues between my MacBook Pro and the Airport Extreme. My wireless connection will appear to "hang" as according to the menu bar icon it will appear connected but if I click the drop down it does not show any status information (whether is it connected via PPPoE or not) on the wireless network the Airport Extreme is providing. During the time that no status information is provided the Macbook Pro is unable to access anything across the wireless. Other computers (non-macs) that are using the wireless continue to work fine as if there are no issues so it appears that it has to do with how my Macbook Pro is receiving connectivity information. Sometimes it seems that I can get it to start working again if I click wireless network icon and it rescans for wireless networks. I am currently unsure whether its using wireless A or G (this is a first gen MacBook Pro) but will try to determine that.

    Bump

  • I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.

    I currently run the Design and Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How do I know whether I can install my Adobe programs onto the new computer? Because I know there is some kind of limit.
    Also, I had to install the software twice on my same computer before because I had to reboot the computer. I don't know if this affects the limit.

    You are allowed to have two activated installations so there should not be a problem having working installations on the two machines.  If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I need to upgrade my first generation Macbook Air to Lion OS x10. I need to install software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The lion s

    I need to upgrade my first generation Macbook Air 1,1 to Lion OS x10. I need to install other  software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The Lion software update 10.7 is no longer available from the store or downloads.
    Where do I get this?
    It was only released a couple of months ago.
    I really feel disinfranchised already by not being able to upgrade and keep up with other software needs but to not allow me to update to my full capacity is really ridiculous.

    @Jennacide wrote:
    It was only released a couple of months ago.
    OS Lion was released 16 months ago...  in July 2011.
    Lion Tech Specs  >  http://support.apple.com/kb/SP629
    To upgrade to Lion...
    Contact Apple in your Country to Purchase a Snow Leopard Disc...
    http://support.apple.com/kb/HE57
    In the US...
    1-800-MY-APPLE or 1-800-676-2775
    After the Successful Install, run Software Update to get the latest updates...
    Be sure to make a Backup of your Current System Before Upgrading...
    Also... Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table

  • HT1338 I purchased keynote, numbers, and pages when i bought my macbook air. However, the December update will not update because it says I do not own the software, but I do. What can I do to get the software to load? This is my first Mac so I am still le

    I purchased keynote, numbers, and pages when i bought my macbook air in late september. the december update will not load because it says i do not own the software and returns an error messgae 100. i have read manuals and looked over the web but i cannot figure out how to get this software update to identify that i do own these three pieces of software. they are installed and usable. any ideas would be appreciated before i call apple support.
    This is my first mac so i am still learning...
    thanks

    First, make sure you are logged into the App Store with the same AppleID that you used to purchase the apps.
    If that is not it, look in the App Store under Purchases. Are they there?
    If not, go into your account in App Store and click the link to show hidden purchases.
    If they are still not there, use the support link in the App Store.
    If they do show up, copy all the apps to an external drive, then remove them from your Mac. Go to the App Store, Purchases, and install from there.

  • Trouble with slow Macbook Air. I have first generation MacBook Air and have a hard time keeping hard drive from being full. Right now, I have almost 5 gigs available, but mac is slow and I keep getting color wheel when I use Mail. Any suggestions?

    Trouble with slow Macbook Air. I have first generation MacBook Air and have a hard time keeping hard drive from being full. After trashing many docs, I have almost 5 gigs available, but mac is slow and I keep getting color wheel when I use Mail. I'd like to install Lion, but now I'm afraid it will slow down my machine even further. Do I have enough free hard disc space? Is Mail problem related to free hard disc space? Thanks for your help!

    7gb of free disc space is required to install Lion.  Read this about how to free up disc space: http://pondini.org/OSX/DiskSpace.html.  Also, advice on how to speed up your mac: http://www.maclife.com/article/feature/25_ways_speed_your_mac

  • I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message!

    I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!

    What is a error message and what do you see when it appears?
    Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
    Perhaps it was a bad update, have you ran through this list of possible fixes?
    Do as many as possible, starting with #1. Until the problem is resolved.
    Use the boot 10.6 USB instead of the disk of course.
    Step by Step to fix your Mac

  • Deleting apps on first gen iPad Air

    Anyone not be able to delete apps from their first gen iPad Air? I can't delete them from holding down the app til it wiggles (no x appears) or from settings. Am I missing something. TIA

    Check: Settings - General - Restrictions - Deleting Apps = ???

  • After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters

    After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters at university. I don't play computer games and I don't watch movies. I do store photos and videos of my kids and music on iTunes. I also like browsing the net with numerous windows open, check email etc. I am really wanting long battery life as I do a lot of my work on the couch - not close to a PowerPoint. Would the air do the trick or will it soon be outdated as Apple move towards retina display? Both air and pro seem very thin  - almost the same? And not much difference in weight either so both very portable which is also a necessary requirement. Just can't help dreaming about that 12 hour claimed battery life. Any helpful advice/opinions, very much appreciated. Thanks

    It's not likely that you'll get 12 hours in reql life. Those benchmarks are set under very strict controlled conditions. Kind of like mileage per gallon claims on cars. If 16GB of ram is an option at all I'd highly recommend you get that. As far as storage 256GB isn't alot, consider storing some things on an external thunderbolt real

  • Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

    Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

    I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

  • I have horizontal lines when printing from my MacBook Air. Its nothing to do with my printer, as am now on to my third new printer, having returned the other two, saying they were fault. Now I know they weren't. Its got to be something to do with macbook.

    I have horizontal lines when printing from my MacBook Air. Its nothing to do with my printer, as am now on to my third new printer, having returned the other two, saying they were fault. Now I know they weren't. Its got to be something to do with macbook. I feel really guily about taking the other printer back, when it was fine!!

    Which MBA, which printer? Printer incl driver properly installed? Printed test page (yes, THE test page, not something else) and it looks okay?

  • HT4718 i have two drives, 80GB and a 2nd Windows drive 40GB.  I'd like to get rid of the 40GB and go back to original 120GB, MacBook Air 2011,  OS X 10.7.5  is this doable?

    i have two drives, 80GB and a 2nd Windows drive 40GB.  I'd like to get rid of the 40GB and go back to original 120GB, MacBook Air 2011,  OS X 10.7.5  is this doable?

    If you used Boot Camp to install Windows you may use Boot Camp to remove it and return your drive to as it was.

Maybe you are looking for

  • Using socket and JMS protocol in the same logic for OSB

    Hi frnds, In my organization...the only communication protocol used is "socket" protocol. However, I want to use JMS protocol to process incoming messages. Can somebody help me figuring out how to go about it. Using some nice OSB blogs, I am able to

  • Planning cube Key figure over flow error

    Hi Experts, I am getting the following  Key figure errors in Planning cube while running the Planning sequences. 1.Over flow occurred when calculating KF KF details : Data type: DEC-Counter or amount filed  with comma and sign. 2.ORA-01455: convertin

  • Satellite L300-1BW - Is very slow

    Hi, everyone! Recently, I bought TOSHIBA SATELLITE L300-1BW (PSLB8E) Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE&partNumber=PSLB8E-03F007EN&serialNumber=Y8805872q&USER_ACTION

  • Workflow not found in SWI6

    Hello Experts, We have a scenario where we are able to create and order a shopping cart. Here we are creating shopping carts for third party using XI interface. When we try to see the workflow through SWI6,a message is displayed 'There are no workflo

  • Need to create a user  from procedure

    Hi to all, I need to create a user from oracle stored procedure. i am able to create a proceure successfully, when i am executing the procedure i cant able to successfully run it. it is throwing insufficient privileges. i tried to run the procedure f