Distorted images in slide show creation.

Hello,
I created a slide show using high res image files and adding music files.
I noticed that while viewing the show in full screen and even after outputing the sllide show to a cd, all the images are distorted.
Any suggestions as to what I am doing wrong?
Thanks,
scephotog

It happened to me the same but after a while not using it, it disapeared. So I don't recommand this method but I noticed I had everything closed after that when I was creating slide show.

Similar Messages

Missing images in slide shows?

does anyone know why some jpgs disappear after a few days in keynote files? I create slide shows and import images, save the files and everything seems fine. A few days later when I return to the document, some images are missing, with just a question mark and a gray rectangle remaining. Text below is still there. This can happen to four or five slides out of 30 in a document. It is very annoying and doesn't give me much confidence in the program.

I have been having this problem alot. I design slides on my laptop at home and transfer them via cd or jumpdrive to the computers on show site. More often than not, I spend the first day fixing many broken links to images and movies. Fortunately, I know this will happen so I bring all my assets with me. If I thought I could just bring the Keynote file (like I should be able to) I would be SOL. This especially scares me when I design the slides but someone else works with them on site. They probably won't know what to do when the assets go missing.
This last show, I also had a few corrrupt movies causing Keynote to crash. The original movies themselves are fine, it's whatever got saved to the archive. If I simply selected the thumbnail or master of the slide containing the movie in edit mode, Keynote would crash. I had to create a new Keynote file, copy into it all the good slides and redo the crashing ones. Very frustrating. Once I had all my Keynotes straightened out on the show computers, they ran fine.
Something just isn't very robust with the creation of the Keynote archives.

How do I create image pushing slide show in Flash?

Hi. I am wondering if anybody can tell me how to create a picture PUSH. I have three images that I wish to work with. By pushing I mean having an image come in from the left (or right) and place itself on top of the other (or pushing the other out of view). Like a slide show of three images scrolling along but one stops for a brief period before the other image comes into view.
Any help would be appreciated. Thanks!!!

As Pat mentioned, this question might be best suited for the Flash Professional forum, I just happen to have the link handy
Thanks,
Chris

Images in slide show appear in low res

Why are images in the slideshow appearing in low resolution? Inside Muse I can click on an image in the lightbox section of the slide show and choose "Edit Original" which brings up the image in Photoshop. The image is 1097 x 1462 pixels. However, after publishing the site and navigating to the slide show, the image appears the right size on screen but looks very low resolution and is only 270 x 360 pixels when drag-copied to the desktop. I thought Muse was supposed to take care of all the resizing of images/assets as it published the site to the web (in my case, Business Catalyst). I tried doing a "Upload: All Files" when publishing, but no luck.

I guess, you have turned HiDPI output on. Just look here:
Photo aspect ratio incorrect when "placing" into Muse
And: If you place a picture in a 488 x 650 frame, and the picture is 1097 x 1462 pixels large, you force Muse to sample it down. If you place an image exactly with its size, Muse doesn’t touch it at all.

IDVD won't create thumbnail images in slide shows

In a slide show, the window that used to show the photos in a slide show no longer renders thumbnails in the list or grid views. The status at the top of the window just sits there and spins forever, with the text "Creating thumbnail images...." Anyone know of a workaround?

Neither of these "fixes" has changed anything. I also cleared my cache, ran a diagnostic check, and a virus/trojan scan! Either way, firefox 4 is just not working up to my needs! Should, or can I go back to 3.6?

Adding photo collage image to slide show in photoshop elts 9

I created a photo collage page using photoshop elements 9 and saved it as a jpg file. It looked clear and sharp on screen. When creating slide show, I added this page but when I play the slide show full screen, the image for this page is blurer than normal. Other regular photos I added in the slide show are ok. Why does this happen and is there a way to overcome it?

Maybe it's me, but... scoobie... i don't think your reply has anything to do with her question lol. I believe she's saying she is having trouble figuring out how to do something, not that the program is crashing.
Anyway, I'm starting a similar slideshow project. I think it's easiest to simply edit the photos in iPhoto. Photoshop is on a different level from iPhoto and obviously has capabilities iPhoto lacks, but I think it should be fine for just editing digital photos.
One of the things you said was "how do you format... resolution"
I don't think iPhoto can change the resolution of a photo like photoshop can, but since you want to make the FINEST quality slide show I assume you'd want to scale the resolution up... and although photoshop can do that, I don't think you'll see a significant increase in quality. It won't look anything like if you had actually taken the photo at a higher resolution.
As far as importing pictures into iMovie goes, that should be pretty easy. If you click on the "media" button in iMovie, and then click on the "Photos" tab on the upper right of the window, it will display your iPhoto library the same way it would display it in iPhoto (organized by albums). You can then drag whatever photos you want to include to the "timeline" at the bottom of the screen.
I'm not sure what to tell you about pixel ratio and RGB vs. CMYK....
The last step, exporting to iDVD is just as simple as adding pictures... just click on the "Share" menu at the top of the screen and select "iDVD". What you do from there depends on what kind of final product you want... and I haven't actually used iDVD so I would just be guessing on that part lol.
Also, I suggest going here: http://www.apple.com/ilife/tutorials/imovie/index.html and looking at the tutorial. I viewed most of the movies there and they were helpful.

"Image Viewer" slide show wont work.

I am trying to do somthing very simple...creat a slide show using the image viewer option in Dreamweaver. After uploading the Image "urls" it wont even play within dreamweaver. What could be the problem?

1. Have you uploaded the Scripts folder to the remote server... because if you try and view it, there's an error message that it can't be found:
The requested URL /http://www.thebloomsociety.net/Scripts/AC_RunActiveContent.js was not found on this server.
2. This link: index/slide show.swf
The requested URL /index/slide show.swf was not found on this server.
Validation errors for the page can be found here:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.thebloomsociety.net%2F

PSE 10 Slide Show Creation hangs programm

Hello,
when trying to create a new slide show from PS Organizer the program hangs completely. I can still chose the options like duration and effects, but after accepting these the next window with the output format options won't show. The program doesn't react on any input and must be cancelled via the task manager. When clicking somewhere in the program window you can hear a windows sound like clicking outside a dialog box, but this box cannot be seen.
Any suggestions are welcome.

Hi. Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop Elements forum for specialized attention to your situation.

Import Images into slide show - Creating Thumbnail images -Hang

I am using iDVD 7. I imported my images into a slideshow. The pictures were not in iPhoto but just a folder that I created and edited in Photoshop. Once I import the images, the window shows all the file names as expected but all the Image Thumbnails are blank and the top of the window there is a message "+Creating thumbnail images... (32 remaining)+" with a spinning wheel next to the message. This message stays there forever. The 32 is the number of images in the slideshow. I can do most things in iDVD while this is going on, but I cannot add the audio I want.
What is causing this and can I get it to stop?

To add to this I decided to remove the slideshow and now import the pictures from iPhoto. I can only get ride of the message by closing iDVD down. When I relaunch iDVD the message is gone. When I now import the pictures from iPhoto the same thing happens where it hangs on creating thumbnail images.

Please help with slide show creation

I purchased the bundle of photoshop and premier elements 10. I was trying to create a slide show and was informed that photoshop elements 10 does not come with a slide show for APPLE. now I hae been told I can creat a slide show in premier. can anyone tell me how and where do I go to create it in preimer.
Also I had purchased the professional version of Photoshop but when I purchased elements 10 on line and downloaded it my professional photoshop was replaced with the elements 10 vesion of photoshop. Is there anyway I can recover my professional version.
I was thinking of buying elements 11 but beging to fell what is the use if I can not get element 10 to work for me.
Please help thanks
Cham

filmmaker863 wrote:
....when you drop the pic in to the time line do you use the scene setting or the standard timeline setting. how do you change the time eact pic will show on screen.
I'm confused by what you mean when you write "scene setting or standard timeline setting". In version 11, I use "Expert" as my standad timeline setting. The other is "Quick" and I have never used it.
The time for each pic starts with a default setting that can be changed. Then each slide can be streched or shrunk with mouse control.
Bill

Slide show creation

I'm trying to add audio to a slide show. I've done it before on this computer with no problem, but now it's telling me I don't have the correct compression files installed on my computer. Not sure what to do next.

What is the exact error message? Can you share a screenshot?
Does the error happen right after choosing slideshow option or does it happen when you try to save/output it?
Which version of PSE and OS you have?
Thanks
Andaleeb

Loading images in slide show

Hello there,
Here is my site :
http://bhc.edu.in/PD/index.html
The images in the slideshow are loading slowly.Before the images gets loaded,there is white space.How can solve it.Please help me.

Crop & Resize all images in Photoshop before you insert them into DW. Save for Web, select the smallest acceptable file size from the 4-up panel.
Nancy O.

Image quality of slide shows using Aperture 3 seems inferior to iPhoto '08

I haven't previously used Aperture. I've been using a copy of iPhoto '08 for several years. I've shot everything in RAW for the last several years and process it in
DXO on my Mac Pro (3 1/2 years old with 7 gigs of RAM). I then load the jpegs into iPhoto '08.
I downloaded Aperture 3 yesterday, and it certainly is impressive in what it can do for improving existing jpegs. I think I could do most touch-ups with Aperture
instead of Photoshop 3. Because of some glitch, I couldn't load or link to my 37,000 images from iPhoto but I did export about 4000 images as full jpegs into
a separate file and then imported these images into Aperture. Touch-ups are an order of magnitude better that trying to use iPhoto to do the same.
I'm an amateur and aside from a fair amount of print making and a few thousand images uploaded to a new Picasa account
http://picasaweb.google.com/jamesn88888
I enjoy a lot of my images via slide shows on my 23" Apple monitor, usually sequenced at 3 seconds per slide.
Comparing slide shows of identical jpegs run with iPhoto '08 and then with the files uploaded to Aperture 3 there is a very subtle loss of definition with Aperture. It's not so
obvious when viewing relatively large detail but is is very noticeable when running slides containing small detail. When both of these programs are just used to display static images full screen I note no difference in readability. Someone suggested that I check the preferences for preview displays. Sure enough, it was set for relatively low quality. I decided to re-do all 4000 images maximum preview display quality.
Using the import settings that came already selected on the trial software, the total size of my
Aperture 3 trial library was a little over 25 GB. The quality of the slide shows did not approximate
the quality of the slide shows of the identical jpegs included in my iPhoto '08 library.
I therefore re-processed all of the previews to the "don't limit" in the photo preferences. The total size of my Aperture 3 trial library grew from 25GB to 41.37GB, an increase of 17 GB. With 3926 jpegs in the library that means the average additional size added to each preview image was 4.33 Megabytes. Inasmuch as the original jpeg images that I imported into Aperture 3 were more in the neighborhood of 1.7 to 3.5 Megabytes each (I have DXO output most jpegs @ 90% quality- fine for my purposes), this is an extreme measure to take in order to be able to use Aperture 3 the same way that I used iPhoto '08. In comparing slide shows between the two applications I still get the feeling that there is a very slight loss in acutance when viewing the slide shows. iPhoto still wins out.
I think that I'm better off staying with iPhoto and continuing to do the RAW processing with DXO and slight file modifications with iPhoto. More elaborate changes can continue to be done using Photoshop 3 and Viveza. It's a shame, because I really like the image processing abilities that are contained in the new Aperture.
Have any of you compared slide show views on your computer between Aperture and iPhoto?
Is there any workaround for best slide show viewing- importing or referencing my existing iPhoto library of 37,000 images does not work for me. My copy of iPhoto 7.1.5 get the message that Aperture cannot import or link to iPhoto earlier than 7.1.5 (?)

I think I've solved my problem with a Google Search. I came across a free slide show generator
(contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
I'm used to seeing.
I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
before.
http://blyt.net/phxslides/
Message was edited by: Jimbo2001

Duplicating an image in a slide show for ending

I need to duplicate an image in slide show to put at the end ( this image is already in the begining I need to use it at the end also).

To duplicate a photo: Photos Menu -> Duplicate
Regards
TD

ANNC: Slide Show Magic

http://www.projectseven.com/products/galleries/ssm/
Leaps beyond the ordinary...
Efficient code and buttery smooth animations make for a truly
engaging
user experience. Slide Shows and individual images can be
bookmarked and
all images can be viewed - even if JavaScript is disabled.
Search Engine Friendly
Unlike many of today's Flash and AJAX applications, Slide
Show Magic
markup is always fully visible and indexable by leading
search engines.
Auto-Choreographed Animation
Slide Show Magic detects the size of each incoming full-size
image. If
it's the same size as the current image, the system will
employ a smooth
cross-fader - simultaneously fading out the current image as
the new one
fades in. If the incoming image is a different size than the
current
one, the system will fade out the current image, glide the
image
container to the size of the incoming image, then fade the
new image in.
It's all automatic.
Staged preloader
When the slide show is running in automatic mode, the system
will
preload the next image as the current one is being shown,
providing a
seamless experience in most cases.
Intuitive toolbar controls
The on-page toolbar contains conventional media controls:
First,
Previous, Play, Pause, Next, and Last buttons. It also
contains a slider
bar that allows users to adjust the slide show timing, plus
buttons to
toggle visibility of the thumbnail display and navigation
menu, and an
image counter.
Drag-enabled thumbnail panel
The Thumbnail panel can be dragged about the screen, enabling
users to
fine-tune the interface for best viewing of the show.
Full-Size images can be hyperlinks
Each full-size image can optionally be set as a hyperlink to
another
page, programmed to open in a new window or tab.
Image descriptions
Each full-size image can display an optional description,
which can
contain any type of valid markup (paragraphs, tables, DIVs,
lists,
links, or images).
Automated image processing with Fireworks...
Web-ready images are automatically produced from your
original images,
which can be located on any drive connected to your computer
- including
drives mounted by your digital camera. Slide Show Magic
handles all
image processing automatically - preserving your original
files in their
original locations in their original and unaltered states.
Your images
are scaled, optimized, and neatly organized into folders
within your
defined site.
Import your existing images...
Point to a folder (or folders) that contain your existing
full-size and
thumbnail image and Slide Show Magic will match them up and
add them to
your slide show - unaltered and ready to view.
Organize Images into sets
Slide Show Magic enables you to define logical image sets and
organizes
the thumbnail panel into navigable sets.
Mix landscape and portrait orientations
Your images are never distorted in any way. Original aspect
ratios are
always preserved. Use both landscape and portrait images in
the same
slide show.
Deploy alone or inside existing layouts
Slide Show Magic can be inserted on a page by itself or
inside an
existing page.
Select from 6 Themes
Select a dark toolbar, a light toolbar, shadow boxes (in 3
sizes), or an
image rotator interface. Style themes can even be switched
for existing
slide shows.
Manage it all inside a dedicated Dreamweaver Interface
Add (append) new images
Delete images or re-order them
Manage Descriptions, links, and ALT text
Edit existing full-size or Thumbnail images
Reprocess all of your slide show's images
And lots more, including a comprehensive manual and free tech
support.
$95
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"

Al,
Wow. That's extremely cool. I currently don't have a need for
a slideshow,
but in the future if I do, you know where I'm heading to.
Nice product!
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Back for 2007, close-up magic:
http://deceptivemagic.com
Web dev articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Al Sparber- PVII" <[email protected]> wrote in
message
news:[email protected]...
>
http://www.projectseven.com/products/galleries/ssm/
>
>
> Leaps beyond the ordinary...
>
> Efficient code and buttery smooth animations make for a
truly engaging
> user experience. Slide Shows and individual images can
be bookmarked and
> all images can be viewed - even if JavaScript is
disabled.
>
>
> Search Engine Friendly
>
> Unlike many of today's Flash and AJAX applications,
Slide Show Magic
> markup is always fully visible and indexable by leading
search engines.
>
>
> Auto-Choreographed Animation
>
> Slide Show Magic detects the size of each incoming
full-size image. If
> it's the same size as the current image, the system will
employ a smooth
> cross-fader - simultaneously fading out the current
image as the new one
> fades in. If the incoming image is a different size than
the current one,
> the system will fade out the current image, glide the
image container to
> the size of the incoming image, then fade the new image
in. It's all
> automatic.
>
>
> Staged preloader
>
> When the slide show is running in automatic mode, the
system will preload
> the next image as the current one is being shown,
providing a seamless
> experience in most cases.
>
>
> Intuitive toolbar controls
>
> The on-page toolbar contains conventional media
controls: First, Previous,
> Play, Pause, Next, and Last buttons. It also contains a
slider bar that
> allows users to adjust the slide show timing, plus
buttons to toggle
> visibility of the thumbnail display and navigation menu,
and an image
> counter.
>
>
> Drag-enabled thumbnail panel
>
> The Thumbnail panel can be dragged about the screen,
enabling users to
> fine-tune the interface for best viewing of the show.
>
>
> Full-Size images can be hyperlinks
>
> Each full-size image can optionally be set as a
hyperlink to another page,
> programmed to open in a new window or tab.
>
>
> Image descriptions
>
> Each full-size image can display an optional
description, which can
> contain any type of valid markup (paragraphs, tables,
DIVs, lists, links,
> or images).
>
>
> Automated image processing with Fireworks...
>
> Web-ready images are automatically produced from your
original images,
> which can be located on any drive connected to your
computer - including
> drives mounted by your digital camera. Slide Show Magic
handles all image
> processing automatically - preserving your original
files in their
> original locations in their original and unaltered
states. Your images are
> scaled, optimized, and neatly organized into folders
within your defined
> site.
>
>
> Import your existing images...
>
> Point to a folder (or folders) that contain your
existing full-size and
> thumbnail image and Slide Show Magic will match them up
and add them to
> your slide show - unaltered and ready to view.
>
>
> Organize Images into sets
>
> Slide Show Magic enables you to define logical image
sets and organizes
> the thumbnail panel into navigable sets.
>
>
> Mix landscape and portrait orientations
>
> Your images are never distorted in any way. Original
aspect ratios are
> always preserved. Use both landscape and portrait images
in the same slide
> show.
>
>
> Deploy alone or inside existing layouts
>
> Slide Show Magic can be inserted on a page by itself or
inside an existing
> page.
>
>
> Select from 6 Themes
>
> Select a dark toolbar, a light toolbar, shadow boxes (in
3 sizes), or an
> image rotator interface. Style themes can even be
switched for existing
> slide shows.
>
>
> Manage it all inside a dedicated Dreamweaver Interface
>
> Add (append) new images
> Delete images or re-order them
> Manage Descriptions, links, and ALT text
> Edit existing full-size or Thumbnail images
> Reprocess all of your slide show's images
>
> And lots more, including a comprehensive manual and free
tech support.
> $95
>
> --
> Al Sparber - PVII
>
http://www.projectseven.com
> Extending Dreamweaver - Nav Systems | Galleries |
Widgets
> Authors: "42nd Street: Mastering the Art of CSS Design"
>
>
>
>

Distorted images in slide show creation.

Similar Messages

Maybe you are looking for