Distorted/muffled speaker sound

So I have a 32gb black iPhone 4. Periodically, my speaker will have rather quiet, or distorted sound output. Randomly after using the speaker for a few minutes, the sound returns to normal. I've seen some people with dead speakers, but not this. Any ideas on how to fix? Should I just go to the genius bar? Anyone else having this problem?
For clarification, this is the bottom speaker, not the earpiece.

This may not be the exact same issue, but I noticed that the iphone 4 was distorting audio playback in the ipod and on pandora causing the headphone magnets to overload. In other words it was not source distortion which is common and acceptable in rock music etc.
This disturbed me enough with the dropped calls to put the iphone 4 back in the box. Im not a hater this is my 4th iphone in 3 years. But I listen to music all day on my iphone and this all I could handle.
I went out and bought a gen 1 on craigslist after living with this issue for 3 weeks. I wish I hadnt sold my 3gs but hey a nice gen 1 looks cool, and the wifi speeds are the same as the iphone 4.
Bye iPhone 4, Ill wait for the next rev.

Similar Messages

  • Internal Speaker sound like DISTORTED

    Hi All,
    My MBP 15" 2008 started to giving me problem. This time - Internal Speaker sound like DISTORTED! No matter what genre of music, what software i play from even iTune, it just distorted. Though, the volume cut down to 50%, still can heard that distorted sound. I don't know what's the issue suppose to name as ~ distorted? Crackle? ...
    I've try to reset PRAM & SMC ,with no luck. Software updated and restart too, No Luck.
    Can you help me? Thanks!!

    Not a usual complaint.  Is it just one speaker or both?  If the former, it would probably be a hardware issue and may have to be replaced.  If the latter, considering what you have tried already, I would suggest a OS reinstall (this is just a guess on my part).  Consider an appointment at an Apple store genius bar.  It is free and they may have a definitive answer for you.
    Ciao.

  • Just set up my new ipad 2, 64gb and speaker sounds scratchy and distorted

    I just received my new ipad 2 today and speaker sounds scratchy and distorted. Should I return product?

    Give it time. Yahoo has had persistent issues the past few weeks. wait 24 hours or so and then try again.

  • IPhone 6 Plus speaker sounds distorted with popping sound when phone rings or alerts play.

    My iPhone 6 Plus is less than a 2 weeks old but since day one its speaker sounds distorted.   The ringer or alerts or even the new email alert have a popping or clangy sound to them.  Is this a software issue or hardware?  My phone is uptodate and Ive tried hard reboots to try to alleviate the problem but it didn't fix the problem.  Should I try to restore it?  Also, If I take it in to my local Apple store and they replace it, will my new ZAGG screen protector just be a wasted $20???

    Hi _3ntr0py,
    I'm sorry to hear that you are having issues with your new iPhone 6 Plus. If you continue to have sound or speaker distortion with your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Regards,
    - Brenden

  • Speaker sound is desabled, How can I enable it ?

    My IPhone 4 device speaker sound is desabled, How can I enable it?

    Hey there Sabbir Khan,
    It sounds like you are unable to get sound from your internal speaker on your phone. I recommend the troubleshooting from the following article to help resolve the issue with your phone, named:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone 4 and 4S:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Speaker sound quality

    Just wondering if it is normal for the quality of the speaker sound to start to suck when the song your playing has a lot of sound going on at one time at max speaker volume.

    so I guess playing music on max volume through the speakers isnt a good idea?
    Even so, even with it at half volume the distortion is still there, is this because the speakers werent really designed to play music?
    Can it permanently damage the phone?
    Message was edited by: Briarknit

  • I just got an iPod touch 5g for Christmas and last night I was FaceTiming a family member and I noticed my speaker sounded a little wired, like it blew out which I don't even know how I did it! I never have it up full blast! Does the warrenty cover it?

    I just got an iPod touch 5g for Christmas and last night I was FaceTiming a family member and I noticed my speaker sounded a little wired, like it blew out which I don't even know how I did it! I never have it up full blast! Does the 1 year limited warrenty cover it?

    If you are in the US you can see if there is a genius bar by going to http://www.apple.com/retail/geniusbar and then click on Make a Reservation at the top and you can search state, city and see how far they are from you.

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • VFL Speaker sound from both the front speakers while FR sound is not coming out at all.

    I have a creative gigaworks s750 connected to a xtreme gamer sound card. The system was working absolutely fine but now it has started behaving very strangely; system is playing back Front Left Speaker sound from both the front speakers while Front Right sound is not coming out at all. If i click the front right speaker in audio console speaker setup wizard, no sound comes. However when i click the front left speaker, sound comes out of both speakers. I counter checked it with playing 5.1 dts movie and muting all the speakers except the front left one from ac3 filter, sound came out of both the front speakers. However when i muted all the channel except the front right, no sound was coming out of front right speaker.
    Message Edited by hussain on 06-10-2009 10:26 PM

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • How to make a simple Pc Speaker sound output?

    Hello,
    how can a make a simple PC Speaker sound output like the standard beep for errormessages?
    Can anybody help me?
    Thanks,
    Alex

    Use this:Toolkit.getDefaultToolkit().beep(); or this: System.out.print("\0007");
    System.out.flush();

  • Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speaker sound very low

    Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speakes sounds very low.. OK with iPhone  and iPad

    This happened to me exactly! What I did was I went into Audio MIDI and clicked on Bose Soundlink tab. You'll see 3 bars; master, 1 & 2. Max out all the bars and that should fix the problem. Hope that works for you.

  • Wireless speaker sound quality

    I've got a macbook air late 2010. Recently i've bought the bose soundlink mobile speaker to listen music around my home. White the speaker sounds good with other device (a pc with window 7 for example) when the device is connected with the Air the sound is perfect for a limited time (about 30 minutes) so it began to be a lot of noise a full of craks. I then stop itunes a then again play and the sound turn perfect. I've found somewhere that i need to set a special terminal command to increase a parameter. I've done it but the issue remain. Is there any solution for this issue? thank you very much for any help

    You may want to check to see if your laptop has bluetooth and get yourself some bluetooth speakers.
    But I don't think any that I am aware of offer what you want for 2 and 3. But the jawbone jambox has great sound.
    I like things that go beep

  • No Front Left , Right or Centre speaker sound

    SB:0240 Audigy 2 platinum?CAmbridge soundworks DTT2200 5. speakers
    Have tried everything I know:-
    Checked FAQ & made sure of CMSS etc. Uninstalled drivers & re-installed latest driver. Checked & re-checked speaker connections.
    Board passes all diagnostic tests but on speaker test I only get sound from rear right & rear left speakers.
    I only get sound from rear speakers at any time which means I lose out on the dialogue from some video.
    Can anybody help please?

    Hi,
    did you go into Windows and set your default Speaker Sound Playback configuration.
    go to Start > Control Panel > Sound and Audio devices > Audio tab > Advanced.
    LMK,
    AL

  • G580 - No speaker sound

    Hi everyone!
    i have just bought my laptop 2 days ago...and there are problems yet :-/ There are no speaker sound. First time there was sound on speaker, but i connected a headphone to it. It sill worked, but after i disconnected it, there was no more speaker sound, just on the headphone. I tried to install the lastest audio driver, but it did not help. I use win 7 64 bit. The laptop is G580, model: 20150.
    Please help me!
    Thank you in advance!

    hi atilenovo,
    On your posted video Your system is utilizing a Microsoft default/inbox driver, since it says on you volume mixer "(High definition Audio"
    If a driver is properly Communicating with Windows It should list the Audio source you are getting from, like on these photos
    REALTEK http://www.reviversoft.com/blog/wp-content/uploads​/2012/04/Volume_Mixer_-_Speakers_Realtek_High_Defi​...
    Intel Audio
    http://blog.nirsoft.net/wp-content/uploads/2011/02​/volume_mixer_win7.png
    A driver is needed in order to fix that
    On lenovo driver download says that G580 can be shipped with either REALTEK audio or CONEXANT Audio
    we need to identify your Audio device then
    Here's how
     http://www.sevenforums.com/tutorials/96442-device-​manager-finding-unknown-devices.html
    that works with Audio devices as well.
    If you were able to identify your Audio Device
    download the right Driver here
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why didn't work music plyer out speaker sound

    why didn't work music plyer out speaker sound?

    what?
    is is a dock question?
    is it a headset question?
    is it a general audio question?

Maybe you are looking for

  • Aggregate build suggestions

    Hello Experts, We are trying to do performance tuning on a BW3.5 setup ... Currently, we are focusing on queries and looking at the feasibility of building aggregates for performance improvement. We find that most queries see data at the very granula

  • Cannot map library libocijdbc8.so (libocijdbc8.so)

    Hi When I run the JdbcCheckup example, to check the connection, it returns this error message: "dlopen: Cannot map library libocijdbc8.so (libocijdbc8.so) java.lang.UnsatisfiedLinkError: no ocijdbc8 in shared library path at java.lang.Runtime.loadLib

  • Apple photo stream exe has stopped working, on my laptop with vista

    I have been using icloud to upload pictures from my iphone to my laptop with Windows Vista for several months. Now on startup I get this message :  ApplePhotoStream.exe  has stopped working

  • Baffling bug: Audio-ONLY loops when placing MP4 in composition timeline

    I have a :55 long .mp4 file containing motion graphics and a narrated voiceover. I want to place that file into a composition. I can preview the footage and see that the audio and the motion graphics are synced properly. Without doing ANYTHING else,

  • Hi, I need help with scrolling

    Hello I am Kevin Jin, I am working a huge project acually not that big, but I need help with five things, i mihgt have more things in my mind but here it is 1. I need help with scrolling like where you have buttons for example or press on a navigatio