Distorted sound on M30-604

Hi,
I have got a problem with the sound on my Satellite M30-604. If for instant I play a cd or an mp3 (doesnt matter with what program), the sound is distorted. It sounds a bit like back in the old days when my taperecorder got jammed. After a while the sound disappears completely and I get bad sound driver errors. When I restart the notebook, the sound again works fine for a while, but then the problem repeats itself. This temporary regeneration only happens when I restart and does happen when I put the notebook in sleeping mode or standby mode for a while. The sounddriver in my notebook is the SigmaTel C-Major Audio version 6.14.1.3835, it should be the latest version. Can anybody help me with this problem? At the moment I am not even shure whether it is a hardware or a software problem. Thanks,
Steve

Hi Steve
I hope that there is some solution that will help you. Did you already try to make BIOS update? It will be interesting to know what you mean exactly under distorted sound. A friend of mine had a similar problem and the cause for that was modem. Sounds stupid but everything is possible.
Like I said if the sound is slowed it can be some hardware mailfunction.

Similar Messages

  • Satellite M30-604 - Hard disk mechanical failure

    My satellite M30-604 is within warranty (bought 10 months ago) and my Hitachi travelstar hdd crashed out of the blue. The crash is probably mechanical so I can not use data recovery software (it makes things worse). The only way to get my data is to give the HD to some specialist who will open it in a "clean room" for something like 300 - 600 Euros (!) and try to recover as much as possible. Now:
    -> Toshiba says that if I do that the warranty is void and I will also have to pay for a new disk (+ 100 euros)
    -> If I want to replace the disk (warranty) then toshiba gets the old disk and I lose my data forever!!!
    WAIT A MINUTE GUYS!!!
    a) this is my data, my work and you CAN NOT blackmail me with this "warranty void" stuff. I want my old crashed disk back! I want to try to recover as much as I can! my 10-hours-a-day work is IN there!
    b) Moreover even if the heads of the disk crashed, my PERSONAL, PRIVATE data are still in the disk and CAN be read with special techniques. How can toshiba (or any other company for that matter) ask me to hand it over to them?
    What should I do?
    What would you do?

    Hi there,
    I sympathise with your problem and can only suggest the following thoughts :
    1. Recovery of your data would seem the most important factor here. I would suggest removing the HDD yourself so that it can be sent to a specialist to recover what data is possible.
    2. Since removal of the HDD does not usually involve extensive dismantling of the notepad it should not invalidate the remaining warranty (other than on the HDD itself).
    3. A replacement HDD can usually be obtained quite cheaply from one of the internet sellers (check using GOOGLE for a suitable replacement). you can then re-install your operating system from the recovery CDs.
    4. I would suggest investing in a suitable backup software package (such as Norton Ghost) to avoid this problem in the future. (I have had four replacement HDDs on my Satellite A30 in the last 12 months).
    HTH

  • Distorted sounds in Windows 7 32 bit

    Hi...
    I re-installed my system with (Dutch) Windows 7 32 bit and used the "Vista" driver CD for my SB X-fi Music card.
    When I play MP3 or WAV files, the quality is reasonable, however, some sounds, specially vocals, are damped by the bass-tones.
    When I play a CD in my Plextor 80SA dvd drive, I get a very distorted sound.
    Doesn't matter if it is a burned CD or a original CD from the music store.
    I think that the output from my DVD dri've is to high, but I don't know where I can change the output level.
    Also tried the latest updated drivers for the X-fi card, but that has no change in the sounds, cd's are still distorted and basstones in MP3 and WAV damp the vocals and other instruments.
    Don't know what to do...please, someone with advise?
    Grtz.
    Zipper04
    Johan Lemmers

    Using earphones, the same thing happens, the bass tones dampen other sounds.
    I tested the speakers with the Creative Diagnostics application and there seems to be nothing wrong with them, even when I pump up the volume to 80 or 90% of the max volume there is no distortion at all in the speaker system.
    I have ripped a CD and played the saved MP3 or WAV?files, they do the same as downloaded MP3 WAV files, bass tones dampen the other sounds. Sometimes the first two or three songs played, are all fine but then it slowly starts to happen... In other occasions, it happens immedaitely.
    I have two identical dvd drives in my system (running on Windows 7 Ultimate) and used the second (hardly used) spare drive, also a Plextor 80SA, to play a legal bought CD and this one gives distorted sounds too! Volume doen't matter, by the way, distortion is also present on low volumes.
    I must add to this that, when I was running Windows XP Professional with SP3 on my system, none of the above happened... It all started after re-installing my system with Windows 7 Ultimate.
    Grtz.
    Johan Lemmers.
    the Netherlands

  • Distorted sound on iMac with Windows 7

    Hi,
    I've just upgraded from Windows Vista Ultimate to Windows 7 Home Premium.
    Before the sound worked perfect, but now it is very distorted.
    When I mute windows I can still hear sound - it is just a bit more distorted and at a bit lower volume.
    I tried to upgrade the sound card driver from Realtek, but lost sound completely. I reinstalled the Apple driver and now I have distorted sound again.
    I'm running Boot Camp 3.1 drivers.
    Does any one know how to solve this problem?
    /Tejs

    Can you find out which drivers you currently have for me please.
    go to Start >> right click Computer >> System Properties >> System >> Device Manager
    Now open up the sound, video and game controllers section and there should be something correlating to your sound driver here, if you could give me the name or the driver name if possible.
    also what iMac model are you running.

  • Apple TV distorted sound for 1 to 2 minuntes

    RE: Apple TV
    Wondering if anyone gets distorted sound for 1 to 2 minuntes, then it completely goes away?  If happens randomly 45 mins or an hour and a half into a movie.  Doesn't matter which app ...... Hulu Plus, NetFlix, movie rental, running video from home share etc etc.
    Thanks
    Scott

    Hi Hamid118,
    Thanks for visiting Apple Support Communities.
    If your Apple TV does not start up and the status light is flashing quickly, these steps can help:
    Apple TV: About the status light
    http://support.apple.com/kb/ht4380
    Flashes quickly
    Having issues. Try restarting or waking your Apple TV. If your Apple TV does not start up properly, you might need to reset the Apple TV or restore it to factory settings. See Apple TV (2nd and 3rd generation): Restoring your Apple TV. If this does not resolve the issue, refer to the Service FAQ for additional assistance.
    All the best,
    Jeremy

  • [TV@Master] Distorted sound despite clean install of XPPro

    Hi, an old problem popped up, reinstalled my MEGA651 installed the latest drivers for my 8086 card and MSIPVS. just like when the early betas were out i had distorted sound, but that was corrected with a later beta, now i have it with the official version. all settings are as low as possible but it does not help. recorded video just "screams". anyone had this problem? how can i fix it?

    yeah i know what you are going thru i've got the same problem,
    i use my pc to record tv-shows and watcht them on my tv
    but because it's so quit i've got to turn the volume high,
    so if i forget that and watch tv its very loud
    anybody got an idea how to boost the volume ?

  • NB520-108: Distorted sound on full screen video

    Hi there,
    I have a harman / kardon nb520-108 (I hope i have the right forum!) and when I maximise the screen on say youtube or iplayer I get a distorted sound.
    I have read somewhere that the bios needs an update but i'd need confirmation of that if it is as the secondary effect is that it means an install of the sound system.
    Any ideas what this could be?
    thanks in advance,
    alex

    The Toshiba software that came pre-installed should warn you if you have all your drivers up-to-date. In any case, you should always update them. Also make sure Windows Updates hasn't installed a different sound driver for you, if it did, just uninstall that one and install the one provided by Toshiba.
    If that doesn't solve it, tell me what browser you are using and what version of Flash you have currently installed. Update both.

  • In-Ear Headphones distorted sound

    Hi,
    Yesterday, 21 days past my one-year warranty, the right in-ear phone now produces distorted sound when the volume is raised.
    I have replaced the mesh cap as recommended, but to no avail.
    It only the right speaker and is directly related to higher volume.
    Has anyone experienced this?
    If so, what was your solution?
    tia,
    Bob

    hi,
    if you own an iPhone 3GS and is covered by Apple Care or limited warranty your in-ear headphones get warranty too
    you can even apply for DIY.

  • MuVo V100 suddenly distorts sound output, hates vocalists

    9MuVo V00 suddenly distorts sound output, hates vocalists Greetings. I have a MuVo V00, which until quite recently has worked according to specifications as desired. After a period of nonuse, upon reinstatement it showed a global distortion in sound output, resulting in--impressi'vely--vocal frequency-range portions of files to be suppressed. Never mind that some music was improved in this way--it is an error that needs rectification, and unfortunately MuVo V00 models are past the End of Service Life.
    I have downloaded the firmware patcher, and reapplied the latest firmware (which I had already had on the device, but consensus in various problem threads here leads one to believe that refreshing the firmware is a borderline panacea). No good. Swapped batteries on a hunch, no good. Swapped headphones, no good. Checked the files that are actually on the disk, they sound like they ought when played through the computer's means. I'm low on ideas, and the last person who asked this question here did not receive a reply. Anything spring to mind?

  • Sound was fine but now distorted (sounds overdriven and clipped) on g7-1075dx

    Sound suddenly is distorted; sounds like a preamp overdriving a power amp. Pavilion g7-1075dx with ATI High Def audio, IDT High Def CODEC, Windows 7 Home. Same at any level on available volume controls.

    the same thing is hapening to be only had my laptop for a month. I plugged in speakers and it was fine, when i took the speakers out the sound is now distored and static from time to time, also one speaker is louder then the other, dont know if thats suppose to be like that.

  • Distorted sound in CQ-45 137tx

    Hi there, hear some distorted noise while playing music or videos in my laptop. This sound prevails in both Vista Home Basic x86 ( Previous os) and Windows 7 Ultimate x64 (Current OS). The sound comes in both the speakers and the headphones. I have updated the audio drivers (i.e latest driver from hp, and updated using windows optional updates)
    I kindly request you to give me a solution for this! Thank you in Advance. Prompt reply awaited!

    Hi there,
    As per boosting your bass try this method listed here:
    http://forum.notebookreview.com/5668647-post3614.html
    Its for a different HP model but its practically the same..
    Also in addition to above try going into IDT Audio Control Panel and making sure all the  volume sliders including for headphones are on max
    Regarding disabling power management, thats very interesting it might be the solution to the problem.. it might if it somehow lowers your speaker power during playback, please let me know if this fixes it as I have the same issue of distorted audio though doing some steps ilke above have decreased how occasional it is..I'll try it too i guess hehe
    The only downside I see is well it'll certainly drain more battery power as audio will now use as much power I guess needed to play music etc.
    Update: On my power management i have both Basic Power Management and Advanced Power Management however I didn't access it though any customize tab (I didn't see one?), i accessed it through IDT Audio Control Panel -> Preferences tab up top -> On the left Settings then underneath it General. Also for description under Advanced Power Management it states "Notice: PC Beep will be disabled while this feature is in use. Small but audible clicks and pops may be present while this feature is in use" meaning this could be the culprit for your distorted sound
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • IPod Classic 6th Gen - Distorted sound :-(

    Hey folks, my friends iPod Classic 80gb 6th Generation iPod has a crappy distorted sound when tunes are played from it.
    He sent it away to get fixed thinking it would be the headphone jack that was the problem - they got back to him and said that it was the Logic board at fault, and charged over £79.99 +VAT for this repair.
    When it came back, all seemed to work okay, except a very short battery life.
    A week later, the iPod froze with no backlight (the menu was still visible but not reacting to any button presses)
    Nothing happened when the charger was plugged in, so we held the Menu Button + the Select button, and it rebooted successfully however the orginal problem came back of distorted sound....:-(
    Very unhappy as £79.99 was a lot to pay for it be broken again so soon.
    Can anyone shed any light onto why this may of happened?
    Was he right by saying it was the logic board at fault?
    Cheers
    James

    I haD the same issue, and was thoroughly ticked off until doing some research and then trying couple things.
    I was able to change the volume limit, that WAS set at half.  I adjusted it to max volume, set a lock passcode, and away I drove.
    Then, upon hitting "play", I began to get a little ticked off.  I realized after a few minutes, I couldn't hear anything playing.
    It was so quiet- and I-95 is noisy, with me regretting buying another Apple product, after is wrote not to.
    So- after reading through a couple of these threads, I just adjusted the volume limit, and VOILA!
    It reverted to 50%.
    So, I did a total wipe, factory-reset it as new iPod.  I checked setting=>volume limit and it was at the 50% point again. First thing that I did was go to the last selection under settings menu, "reset settings" and noted it doesn't delete sync days, solely sys settings.
    I adjusted the volume limit to 100% immediately afterwards, set a new passcode and then.....
    Hit play.
    It worked. Plays just as loud as my original 3rd Gen iTouch. 
    So Dylan1219, maybe try that?  It's so simple, I am shocked that's how I fixed it.  It had been set- and always snapped back to the 50% mark.
    So, MAYBE that could solve the problem..?  I have hearing loss from rock & roll and concerts, etc...so, thankfully this isn't a bunk product.  Just had a bunk setting. 
    It has stayed at Max level for hours now, and can state it solved it for me.
    I would hypothesize, all iPod classics are made the same, except for the "options"  of storage and color.  Maybe a small "governor" or a piece of extra firmware is added after the fact, or only "every 9th iPod" who knows for sure...? 

  • Imac DV G3 (PPC) speakers suddenly distorted sound output

    HI everyone, I just bought an old iMac DV running OS9, and it worked just fine for a few days then - for no reason whatsoever, the stereo speakers suddenly produce very distorted sound, even at low volume. At higher volumes you can even see the speaker cones vibrating.
    When it happened, I was just installing a few things with the volume set low, and the alerts suddenly sounded very distorted and remain that way. I didn't blow the speakers by playing loud music or anything like that.
    I had nothing to lose, so I reformatted/installed new system but the problem remains.
    My guess is that this is an electrical/hardware problem just down to plain old age, perhaps a bad solder joint or something. It's not the end of the world but it just seems strange that it happened so abruptly I did not move or thump the computer in any way.
    It's an iMac DV from 1999, given it's age I'm not expecting miracles, but just wondering if anyone else ever had a similar problem and managed to fix it without pulling the computer apart and replacing a hardware component which is way too much hassle!
    Were these models' speakers ever known to suddenly crap out with no warning?? Some older macs had design flaws they became notorious for (I'm thinking of my Ti Powerbook G4 hinges, I had that once!) 
    Is that extra button on the side booting into open firmware of any use? Just a stab in the dark!!!!
    Any ideas/insight anyone?
    Thanks!!!

    At higher volumes you can even see the speaker cones vibrating.
    That is normal. If they don't move, they don't work.
    However, it could be that someone else overloaded the speakers and caused them to fail. I think the first step is to see if the speakers have been damaged. Use a pair of external speakers or headphones and test the sound.
    Failed speakers in G3 iMacs are not a wide probelm like the one you mentioned, or bad capacitors in eMacs. Generally, the failure mode is the passive cooling (read, "no cooling") system baking the PAV board until some part of it fails.

  • Distorted sound with mountain lion.Is there any solution?

    i have distorted sound with a usb soundcard since i upgrade mountain lion.. Any idea?

    Once you get straightened out consider backing up via a bootable clone. It can solve a lot of problems.
    http://www.cultofmac.com/48861/how-and-why-to-clone-your-mac-hard-drive-macrx/
    http://www.maclife.com/article/howtos/how_make_bootable_clone_your_mac
    http://macs.about.com/gi/pages/poll.htm?poll_id=9868399270&linkback=http://macs. about.com/b/2012/02/22/readers-choice-awards-2012-voting-best-mac-backup-applica tion.htm&rc=1

  • Cannot install modem on SATELLITE M30-604

    I can't see my modem in the Device Manager. I can't see a com-port in the device manager.
    When I choose controlpanel>phone and modem options I see no modem.
    I choose the Add-button. My modem is not detected. Then I have the option to install it from a list.
    I choose Have disk.
    I choose the Browse-button and
    I select the Tools&Utilities CD ROM that came with my notebook (or the downloaded files from Toshiba).
    I select the (D:\Modem Driver\NETHERLD)ltsmwxp.inf file on the CD.
    Still NO models appear in the Install new modew window.
    How can I install my modem?

    > hi,
    >
    > do you use the Toshiba Recovery OS or did you
    > installed your own MS vullversion?
    Thanx Pelox.
    I' am sorry but I don't understand what you mean. The notebook came with Win XP and I ungraded it to Win XP Pro.
    > In the first case the modem should be detected when
    > you started the notebook the first time ever. If it
    > is not detected then the modem has a hardware
    > failure.
    The modem worked fine with Win XP Pro. I do not know when it stopped working because ad home I have a T1-connection. I use the modem only on the road.
    > Secondly you should try to install at first the modem
    > driver from the Tools&Utilities CD secondly you
    > should download the current modem driver from
    > https://eu.computers.toshiba-europe.com/ Driver &
    > Downloads
    I did. But when I try to "Add new hardware" no models/drivers can be found when I select either .inf-file. (And I know how that should look like!).
    > In the end, when no suggestion solved the problem,
    > you ca try to recover the notebook with the Recovery
    > CD (but save important data before starting!). This
    > procedure set the notebook back to default OS
    > settings and if there is a software or driver failure
    > the modem should work! Unless there is a hardware
    > failure!
    Sorry but this does not feel like solving a problem :-))
    At one point, after a restart, the modem seemed to install (what a wonder) automatically. After the next restart it had disappeared :-((
    When I read the log, I find:
    Opening the modem device failed with error 000005aa.
    Another question:
    When looking at Toshiba-download-site I can choose some modelno. for my notebook. I have a Satellite M30-604 with an upgrade from Win XP to Win XP Pro. What modelno. does that make? Is it a sm30x?

Maybe you are looking for

  • Delete all existing roles

    Hello, we 're using the GRC Provisioning Framework (with IDM 7.1 SP4 and GRC 5.3 SP10_1) and want to delete all existing roles from a user bevor we set new roles to him. Is there a general command to do this or have the existing roles to be known? Th

  • "The iPhone could not be synced because the sync session failed to finish"   Help!

    So i have multiple devices synced to my macbook pro including an iphone 3g, 4, and 4s. 3g running 4.2.1, 4 running ios 5, and the 4s running ios 5 as well. I've had no trouble in the past month syncing the phones whether it be music, photos, contacts

  • Authority check POWL queries

    Hi all, is possible to hide some queries in POWL depending on the user's roles ? For example; in tab SRM Administration I want that all users can use the queries; "Suppliers", "Bidders" and "Contact Persons" ... , but i want that only some users can

  • Verizon can't do anything else?? for those that were hacked!!

    Last week I received a email from what I thought was my "my verizon online" saying I got 20% off. I didn't think anything of it and I proceeded to log on and enter my account password and that was that. I really didnt think anything of it. Days later

  • Custom Brushes CS4/CS5

    I have been trying to create a brush that looks like a REAL marker.  Looking at my image you can see the issue I am having.  Top image is a real marker scan.  Middle/left image is a calligraphic brush in illustrator.  Bottom image is what I used to c