Distorted type and wrong images when uploading

I have built my whole site in iWeb, and didn't seem to have any issues. I made some minor changes to it today, and when checking it online after the upload, all the fonts seem distorted and wrong, some images show up completely different than what they are suppose to be, and the whole thing looks like a hot mess.
ANY IDEAS WHY???

Provide your url so people can see what you are talking about.

Similar Messages

Muse: Text is a image when uploaded, why?

Why does the text typed in Muse turn into an image when previewed and uploaded?

Hello
This phenomenon is called "Rasterization" and it usually happens when you use a system font for your text.
Cheers
Parikshit

How do you create moving type and or images in Keynote?

I'm new to Keynote and would like to take an existing Power Point presentation and make it more interesting by adding some special effects with the type and images.
I can't seem to figure out how to do that.
Any thoughts?
Thanks
Ro8668
G4 Powerbook Mac OS X (10.4.3)

I need to know more here to help answer this question. Do you mean animating text, graphics, etc., like in traditional presentation software.
If so, you would use the Inspector and lick on animation button and set your build in and build out options, the order of the effect, etc., in Keynote. There are many effects you can choose from and can apply them to both text and graphics.
If you are speaking of more complicated stuff, let me know and I can help you with that as well.

Jagged Edges and Unstable Images when converting from Image Sequence to DV

Hi,
I have an Image Sequence (very good quality) that I'm trying to convert using Graphic Converter into DV NTSC Video.
I chose Progressive scan.
I find that the Images appear to have Jagged Edges especially when there is movement involved. Also, the entire image as a whole appears to be Unstable/ Vibrate Slightly.
Does anyone have Experience with this?
Thanks,
Rajnesh Domalpalli

Ntsc dv should be interlaced. also if you are viewing on a computer monitor the footage will appear nasty. It's best to view via an NTSC monitor.Do you have Final cut? if your images are correctly sized you should be able to drop the sequence into a final cut sequence set to DV NTSC and render out the resulting video. You will likely need a multiformat monitor as I believe the standard in India is a PAL variant PAL B not NTSC . in NTSC the screen is filled first by odd lines (Field1) then by even lines (Field2)thus a single pixel line will appear to turn off and on as the screen fills between odd and even lines. Straight lines and angled lines exhibit aliasing and flickering particularily when viewed on a computer monitor because computer screens fill the screen progressively from top to bottom and at a much higher refresh rate than NTSC. hope this helps

What causes double letters skips and wrong letters when typing

Os 10.9.5
Tried a new keyboard and still get skips, double letters, and wrong letters non adjacent to the intended key.

Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and see if the problem persists there. If not then reboot normally and try again.

Distorted and disarrayed images after uploading edited page

I had two text boxes with hyperlinks not functioning properly (in Safari, though not in iWeb), so I tried a few methods to fix the problem, none of which have resulted in success. I've deleted the malfunctioning boxes and copied and pasted from other pages. I've deleted them and copied and pasted from within the page, changing the text and linkage to suit. I've deleted them and recreated brand new boxes. I've selected all objects and deleted them and tried to copy and paste them peice meal. When I publish to a folder, and view from my computer, the new pages show distorted sizes, text, and have deleted boxes in other locations. It seems like the png numbers are assigned "out of order" between the html file and the reference folder. I then tried to bring the original file off of my live server and replace the bum file in my published folder on the computer. I'm now realizing that iWeb does not use the published folder during editing.
1) Why is this happening?
2) How do I get it back? (can I import file information back into iWeb rather than into the published folder?)
I notice that someone else had the hyperlink issue on the latest version of iWeb, so it doesn't seem like an upgrade is necessary/would fix the problem.
Bradley

BYoder in NC wrote:
So do you have any thoughts about why, after editing a few objects and reposting, the images were shuffled and distorted (even though they look fine in iWeb)?
Bradley ~ No, sorry. Perhaps someone else will chip in here soon with a suggestion. Meanwhile there are some things you could try in the +"Fix iWeb"+ section here:
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Images when uploaded to the web the colors shift

I have been having a problem lately with my images displaying funky when they are uploaded to the web. The images become over saturated. The color space is sRGB so I am not sure what is going on. I never have had this problem till this year. I use lightroom, then export the image and finish editing the image in photoshop. When I export from Lightroom I pick srgb color space.

People say so because by default the system assigns sRGB color space for the monitor profile. This in effect turns off the color management of the display in color managed programs when images are displayed with sRGB profiles. Then this makes the display of sRGB images in the color managed programs match the non-color managed programs. This also makes people wrongly believe that non-color managed programs are using the sRGB color space while in fact it is the color space of their monitors because non-color managed program have no clue about any color spaces. Monitors may differ a lot from each other while the sRGB color space like any other color space has very specific colors.
It is a very simple test, View > Proof Setup > Monitor RGB. This turns the color management of the image display off. Does this match the sRGB images? The answer will be yes if the system is using sRGB color space profile for the monitor regardless of how good or bad the monitor calibration is. If it does match and if the monitor profile was created with a calibrator then this is like hitting the jackpot which as far as I know no one has claimed so far. Yes, on theory it is possible but on practice it doesn't happen easily and that was the main reason the color management was invented (physical devices like monitors can't match device independent color spaces). Everyone with a custom monitor profile made using a calibrator will detect a difference between images displayed with Monitor RGB and sRGB on any kind of monitors - not only wide gamut but standard too. This means it is typical to see difference between color managed programs and non-color managed programs on properly calibrated monitors.

Missing image when uploading Dreamweaver site through the FTP

Hi,
Can someone please help me?
I have been trying to upload an image onto my site however it will not load once I have uploaded it to the FTP and made the page live. I have tried linking the image in the properties but this just made the below clickable to view the actual image - but not shown on the page it is supposed to be displayed on.
Does anybody know what I am doing wrong?
Many thanks!

Some of your other images are in the 'images' folder in the 'htdocs' folder:
htdocs/images/return_courselist_button_s3.gif
I'm assuming that is where the ms_spoint_2007ce.gif is supposed to be BUT it isnt:
../../../../../ms_spoint_2007ce.gif
Move it to the 'images' folder and re-link it:
../../../htdocs/images/ms_spoint_2007ce.gif
You can also use the absolute url to the image if needs be AFTER you have located it in the 'images' folder:
http://smartstyle.co.uk/pages/courses/htdocs/images/ms_spoint_2007ce.gif

Hanging and getting stuck when uploading

This has happened a few times now
FCPX gets stuck uploading
It doesnt move from the percentage mark its stuck on
It becomes unresponsive to clicks
I have to force close
Also... I suspect that the job gets finished...
When I tried to reupload a task that I thought it got stuck on... I got a message on youtube saying I had uploaded duplicate content
Any ideas?
Thanks
Omar

Hey Omar
Some of the issues can be addressed by checking out the basic troubleshooting article to ensure everything is installed and up to date.
Final Cut Pro X: Troubleshooting basics
http://support.apple.com/kb/ts3893
Thanks for using Apple Support Communities.
Regards,
-Norm G.

SWF slow to load, and removing sound when uploaded

Hi,
I've created a swf file from Flash CS5, running a video player and FLV, which plays fine locally, and when previewing from dreamweaver CS5. However, once it's all uploaded (video file, swf, html), the file is very slow to load and then doesn't play sound.
It can be found here: http://andypowell.co.uk/wateraid-drtv-inserts-door-drops-online-banners.htm#&panel1-1
I've had this issue before with the swf files on panels 2-4 and managed to fix it, but I can't get through it this time. Any help would be much appreciated.

Flash is a dead web technology because the most popular mobile devices can't support it. Use HTML5 video. You'll reach a wider audience with less code and fewer problems.
http://www.w3schools.com/html/html5_video.asp
Nancy O.

I have 15,686 photos on iPhoto 11 and am now, when uploading latest photos, getting a message saying that my startup disk is full. Is there any way of increasing the capacity of the start up disk?

I have 15,686 photos on iPhoto 11. As I've been uploading the latest photos in the last two days I've been getting a message stating that my start-up disk is nearly full. I had no idea there was a limit. Is there any way of increasing its capacity? I have been shooting in Raw of late and I know it takes up a lot of space but I have heard of other people who have over 20,000 photos on their computers, so what is going on here??

Two possibiilities here:
1. Your start up disk is nearly full
Or
2. You have minor damage to the iPhoto Library and it's giving you a bogus message.
But here's the thing: A full start up disk is a very serious issue and needs to be dealt with fast.
So, how big is your Hard Disk? How much free space on it?
Regards
TD

High power comsumption and wrong setting when waking up from sleep

See here for some more information: http://forums.lenovo.com/t5/Windows-7-RTM-Discussion/High-Power-Consumption-with-Windows-7/td-p/1668...
Settings: T400, integrated GPU,"maximum battery live" power sheme, brightness level 3, wlan on. Newest switchable graphics driver, power manager and power management drivers installed, SU4 didn't find newer drivers.
Power consumption is between 12-16W most of the time, whereas it was close to 10W on XP, from what i heard from a friend, i installed win7 on my machine right after i bought the thinkpad.
When waking up from sleep( i think hibernation as well) power consumption is abnormal, because both GPUs are activated. You have to switch to to the dedicated and back to the integrated via power manager to deactivate the ATI, which is very annoying.
Is lenovo working on these issues or are there any workaroungs already?

I've got similar problems on a T400 with hybrid graphics running Windows 7 x64 Professional, upgraded from Vista x64 Professional. I've upgraded everything to the latest (driver, bios, etc etc) using System Update.
When I boot up from cold, and switch to using batteries, the power consumption is around 8w. Very good.
Then I suspend, and resume from suspend, and the power consumption shoots up to like 20w. Horrible.
Then I manually switch to "High performance" and then back to "Energy saving", the power consumption comes back down, but to >9w, which is like 13% above the original 8w level. Acceptable, but not good.
This seems to indicate there're at least two problems with the power management aspect of T400 + Win7 x64:
First, there is the well-known problem that both internal and external graphics cards get turned on upon resume. Lenovo, please fix this problem. It's completely unacceptable to have to manually perform that switching every time one closes, and then opens the lid, or loss 60% of the battery life. And I do need to use the external GPU from time to time, so disabling it at BIOS level is not acceptable either.
Second, there is the more subtle problem that some other hardware/driver besides the graphics card makes the T400 draw an extra >1w upon resume.
I really wonder if these problems occur with T400 preinstalled with Win7 x64. If they do, shouldn't every major laptop review sites take notice of the defect and warn people. If they don't, then I do not really see why it's so hard for Lenovo to provide earlier users with the right driver/registry patch/etc to enable the correct behavior. As far as I know, these problems have not been fixed since Win7 came out.
Finally let me add that other that this, I'm extremely satisfied with my T400/Win7 system. The thermal dissipation, noise level, and durability are just top-notch. But this just makes the above mentioned problems more of a thorn in the side!

Preview and Thumb image in MXP Upload

I've noticed that other content types allow users to upload a
Preview and a Thumbnail image when uploading their extensions. It
seems that this option is only unavailable to MXP extensions.
Is there any reason why we cannot upload these images with
MXPs also? It would be beneficial from a marketing standpoint, but
also from the perspective of understanding the extensions before
downloading.
I'm interested in learning why this feature has been removed.

If you are using a Container you just leave your image files in the home directory of your web application. And forget this idea about database. It´s not necessary in this case.
To display the images just use HTML, <img src="url">.

Anyone know Disk Utility, Ignore Ownership, and disk image DL DVD issues?

I am currently having issues with backup DVD's I burned using Disk Utility. I can put the dual layer DVD's in and the system reads them. When I try to pull a file off the Dual Layer DVD a circle with an X appears notifying me that I cannot copy the files to my desk top.
When I check the DVD's permissions it reads Admin (me) read and write with the ignore ownership checkbox checked...which means I should be able to pull files off the DVD. The only way I can currently get information off the DVD is to duplicate the entire disk to a new folder by selecting the DVD while holding down the Cntrl key and selecting duplicate. I have had other issues with DVD's and disk images in Leopard....including having to eject either through disk utility or by selecting the image with the Cntrl key held down. Finder eject, keyboard eject, and the menu eject selections suddenly report that the disk is in use.
The DVD's were burned by creating a dual layer dvd image through disk utility with the read/write option checked.
After duplicating 2-3 disks, the system itself is unable to mount any more disks from the series of backups. When I look at disk utility it reads that the disk is not mountable. I have to restart my computer so the system can continue to read the backups.
My Itunes disk backups are marked the same way (ignore ownership) with admin read/write privlages....I have no problem pulling files off these disks.
I have tried both logging in as root and booting from an external drive...same problem. Is this some nasty Disk Utility bug? Is anyone else having bizarre permission related issues with Disk Utility and Disk Images.

When you create the image in Disk Utility, did you
change the 'Partitions' setting?
If you leave it to read 'CD/DVD', it will create a ISO9660/UDF image.
To be able to maintain permission and extended file attributes, you
need to select 'GUID Partition Map'.
I assume you used iTunes to create your music backup?
It seems it creates the correct image type for you.
Before sending this message, I actually created a single layer image,
copied some files to it and gave additional permissions to other users on my system.
Afterwards I copied the files to my Desktop, verifying that the attributes are still intact.
Best regards
(It took quite a while to burn this 4x DVD-RW Anyways, I hope I could help)

Find the Alert Type and Alert Severity from SSLHandshakeException

I am using SSL connection and for some use I need to find out the alert type and its severity when it is thrown from the Java library.
sslException.getAlertLevel() or sslException.getAlertSeverity()
Like if the level of severity is FATAL I need to take some steps on it, but I could not find from where I could get this information.

What part of 'all SSLExceptions are fatal' didn't you understand?
The fact that some SSL alerts are just warnings has no bearing on this, unless you have some counter-evidence that shows that warning alerts throw SSLExceptions too. Do you? The only two alerts I can find that can be warnings are 'close_notify', which is manifested as read() returning -1, not as an exception, and 'no_renegotiation', which as a quick search of this forum will show you is definitely treated as fatal by JSSE, as it is permitted to do by the RFC, and causes an SSLException.
NB cross posted.

Distorted type and wrong images when uploading

Similar Messages

Maybe you are looking for