Distortion after importing to premiere

Hello I'm using a program called bandicam setup todo h.264, Recently whenever I import my footage to premiere its become very laggy and in the preview it shows signs of distortion.
Before importing to premiere
http://puu.sh/2UGMP.jpg
After importing to premiere
http://puu.sh/2UGAg.jpg
Thanks for reading!

>also imported footage from one of my cameras and had the same problem
That would indicate you do not have a bandicam problem, you have a more general problem
More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

Barrel distortion after import (Aperture 3.5.1)

I've noticed before now that when I import any photos to Aperture, it applies some sort of automatic adjustment the first time the photo is viewed. It's usually just a slight thing, almost as though the contrast has been put up a little bit. It's something like a 'deepening' effect on the images. It isn't anything I've set (no preset or adjustments have been applied at this point), but it nevertheless affects every photo that I import.
I just got a 35mm f/1.8 lens for my Nikon, and started testing it out by shooting in raw (.NEF), just for the fun of it. When I imported the shots to Aperture, the same effect happened as before, only much more exaggerated; higher contrast, more saturation, and a certain amount of barrel distortion seems to have been applied. I don't know if this is Aperture attempting to reduce distortion that it detects, or what it might be doing, but it definitely is doing something to alter the photo. This lens has much less distortion than I was expecting, and in-camera it performs beautifully -- but after importing to Aperture the photos take on a weird look. This is particularly a problem when shooting in raw, while JPEG shots don't seem to be effected by distortion.
Any help with this issue?
Thanks!

What you are seeing is the difference between the in-camera raw processing and lens distortion correction, that is applied to the camera generated jpeg previews, and the naked raw files, that is Aperture presenting you.
When you first import a raw image, you will see the preview generated by the camera. This preview will show all incamera processing, including Nikon's lens correction. After loading the image, Aperture will replace the camera preview by a preview rendered from the raw.
Aperture does not do lens correction to correct any barrel distortion. If you are shooting raw, you will see the naked raw without any in-camera processing applied in Aperture.
If you want to profit from Nikon's in-camera processing, import the jpegs with the highest quality setting and not thr raw files. Or use lens-correction software like the Aperture plug-in PTLens.

My video gets pixilated after importing in Premiere pro cc 2014. I've try to change settings but nothing happens.

My video gets pixilated (specifically the text on the video) after I import it in premiere. I don't think it's because of my editing because when i'm previewing a video after importing it the video is already downgraded and the text are so pixilated. I hope someone could help me.
Thank you in advance.
God bless

Here is the sample sir. I'm editing one of our church event and this is what i encounter.
Here is the info of the video as i click the properties of it in Pr:
Type: QuickTime Movie
File Size: 18.5 GB
Image Size: 720 x 486
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 24 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:59:46:29
Pixel Aspect Ratio: 0.9091
Video:
There are 107609 frames with a duration of 1/29.97th.
Video track 1:
Duration is 0:59:46:29
Average frame rate is 29.98 fps
Video track 1 contains 2 type(s) of video data:
Video data block #1:
Frame Size = 720 x 486
Compressor = Apple ProRes 422
Quality = Most (5.00)
Video data block #2:
Frame Size = 720 x 486
Compressor = Apple ProRes 422
Quality = Most (5.00)

Distortion after importing songs, same tune sounds WAY better in WMP!

At first I thought it was a hardware problem with one of our IPODs, but after transferring the tunes from one IPOD that died to another, and hearing the same problem, I have confirmed that the same song (Sufjan Stevens's "Flint") sounds terrible when played off the CD in ITunes (latest version)(very noticeable distortion, an AM radio sounds better), and also when imported, no matter what format ("AAC" supposedly being the "best"), while the very same song off the CD sounds great (noticeably louder at the same speaker volume level) and richer, with no distortion in the piano) when played in Windows Media Player. So what gives? I read that Apple brags about "CD quality" sound but nobody warned me it would be so hard to make a quality transfer of tunes from a CD to an IPod. Anyone else experienced a similar problem?
IPOD 15GB Windows XP

Yes!
Exactly the same problem. Got a pair of expensive shure earphones, no eq settings and not excessive volume.
i ripped radiohead amnesiac at apple lossless(!) and there is a very noticable distortion on some tracks on my 5g ipod
i really cant understand this

Only half of the video clips have sound after import to Premiere Pro

Hi!
When I import my .MTS fukes into Premiere Pro 2014 longer clips loose sound after half the clip. The clips themselves have sound because they are with sound when I watch them using VLC.
How can this sound issue be solved?

Thanks for the screenshot.
Hmm. I don't recall any other reports of a problem like this with MTS files. [Just today I was working on a similar issue with P2 content, but it was limited to spanned clips. Hence that question...]
First thing I'd try is to clear the media cache files, at least for the affected clips. You should find those files here: C:\Users\<username>\AppData\Roaming\Adobe\Common\. If not there, then check Preferences>Media.

Image distorted after import from FCP

I've been working on this project for some time now, and it's really frustrating.
I'm editing together footage from two cameras (A Canon XL1 and a Panasonic AG-DVC 7P) in Final Cut and then exporting that as a quicktime movie, bringing that into Motion to add titles and logos. When it's exported, burned to DVD and played on a TV, some shots look really terrible.
It's as if there are lines of distortion (like it's shaky, leaving traces of the image) on many of the quick shots, especially when it's a quick pan or tilt. It looks alright on the computer screen but turns to dookie on a TV.
Is there some problem with the scanning, interlaced or progressive setting? I could use a hand if anyone has seen this kind of problem before.
Thanks a bunch,
Matt
G4 Mac OS X (10.4.8) 1.2GHz 1GB SDRAM

When doing the titles and logos are you doing them in motion and then importing them into FCP or did u bring the whole thing into motion at the end.
Also could be a problem with your burner.

Help! Strange video distortion after importing film onto IPHONE.

So I used Compressor H.264 to create an .m4v file to play my film on an IPhone. For the most part it sounds and looks great. But in two separate spots this weird video distortion occurs in a part of the frame. It's like these large squares of video appear for a second or two, then disappear. The really strange part is that it's always in the same two spots. I tried re-compressing the file thinking it mignt be a problem in the pressing. Watching the files on my comp using Itunes or Quicktime player there is no distortion. But once the movie is synced onto the Iphone it's always the same result. Those wierd digital shifting cubes pop up at the exact same two spots. No matter how many times I re-compress. Any ideas? I'm at a loss and I gotta figure this out in the next few hours.

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/HT1211
http://support.apple.com/kb/HT1425?viewlocale=en_US

JVC Everio Audio Quality After Import

I filmed quite a bit of video using my companies JVC Everio in full HD 1920x1080. The camera natively shoots in .tod format. I flipped it to .avi using AVS Video Converter. Both files play fine in VLC player, and they look just fine. After importing into premiere, the videos will barely play, and are super laggy. They video doesn't match up to the audio in the source window at all. I'll set in and out points, and only the video will go to the sequence in the timeline. Once I drag the audio and match it up to the video i just dragged, the audio doesn't match. I have to manually fix it. Even still, the audio sounds HORRIBLE. Again, it sounds just fine in VLC player, it's only after I import it that it made a womans voice sound slightly deeper, and just terrible quality. Am I doing something wrong in the import? Are there some sequence settings I need to change? I can fix most of the video problems, I can even deal with manually adjusting the placement of the audio and video after each insert of video from the source moniter, but I simply cannot deal with the loss of quality from the audio. Please help, I'd love to provide any additonal information about the system or project settings.

You sir are a genius.
Hahaha... not a chance.
http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=.tod&oq=.tod&gs_l=hp.3..0l4.18 38.3447.0.3618.4.4.0.0.0.0.165.323.3j1.4.0.les%3B..0.0...1c.1.5.psy-ab.xjJp2fSHMjE&pbx=1&b av=on.2,or.r_qf.&bvm=bv.43287494,d.b2I&fp=73136f47513e4cd6&biw=1053&bih=834

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

Importing from premiere pro cs5 to after effects cs5

hi, can anyone help me with this problem?
im editing some stuff in premiere pro cs5 and when i import it into after effects cs5 for colour correction and other effects all the transitions that i had from premiere will disappear. if someone can guide me step by step to this process it will be very helpful
Thanks,
Randolph Azzopardi

As Mylenium suggests, there are many ways to move information between Premiere Pro and After Effects.They are all outlined on this page: "Working with After Effects and Premiere Pro"
You didn't specify, but I'll assume as he did that you are exporting a Premiere Pro project from After Effects. That works by converting things from native After Effects to their equivalents in Premiere Pro; sometimes there isn't a good equivalent, so the conversion isn't perfect. The same conversion is done as is done for copying and pasting between After Effects and Premiere Pro. There's a set of tables that describe the conversions here.
The way to get perfect fidelity is to either use Dynamic Link (as Mylenium suggested) or render and export a movie from After Effects and import that into Premiere Pro.

Why does Adobe Premiere CS6 slow playback after importing some audio?

Adobe Premiere CS6.0 v6.0.2
Mac Pro:
1, 4 core - 3.2ghz CPU
16gb ram (4 sticks of 4gb @ 1066 MHz)
1 Tb dive with OS/Apps on
2Tb 7200 RPM media drive
ATI Radeon HD 5770
Sequence:
30Fps
1920x1080
Media:
mostly .MFX files from a Canon XF100 however these clips commonly play nice with Premiere.
Issue:
After importing some audio clips (.wav/.mp3, possibly other extensions) to the timeline on occasion the video playback will become choppy and the audio will slow down 3% creating any voices in the video to become deeper and slows down. Choppy video playback as well. The problem is very annoying but it can be temporarily fixed with a computer restart but it will come back.
Things to note:
Creating a rendered ID (Exporting the movie out to a .mov) the slowed choppy video does not appear in the final movie.
Temp. Solution:
The only way I can fix this problem is by restarting the computer. Simply restarting Adobe Premiere and closing any non-essential applications does not fix the problem.
Any ideas on how to fix this are much apperciated.

Try converting your MP3 to AIFF ,QT or something else Macs like. See if that helps.

Problem importing adobe premiere project into After effects CS6

I've been working in Adobe's premiere and after effects for quite a few years now and this problem is new to me.
I'm working on a project in After Effects CS6 and want to import a premiere pro project into After Effects. I go -> File -> import -> adobe premiere project
Select project
Select sequence
Now After Effects CS6 imports all files from the premiere pro project like before in CS5, but now also imports the videofiles as sequences at the root in my project panel and messes everything up. Before it usually imported nice and tidy with the same folder structure as the premiere pro project would have.
But that isn't the main problem. When i open the sequence i wanted to import and work on, some clips have been shortened down to 1 FRAME LONG at the end. These clips have a 500% speed in premiere pro, but this has never been a problem before, after effects has always before been able to translate the speed variations in clips from premiere -> after effects.
The adobe premiere project that was imported is a 60 sec promo with various clips in various formats (Gopro h264, dv pal quicktime etc). Footage not exceeding the fair amount that after effects should handle. 15-20 videfiles at 30 sec each.
I've never had this problem before with premiere <-> after effects.
Anyone?

I just found the solution!
In my adobe premiere project that i was trying to import, some of the clips were "right clicked" and applied "Scale to frame size"
Every videoclip that had "scale to frame size" in my adobe premiere pro sequence would import as its own composition in After Effects rather than just a videofile, and some of the clips would be trimmed down to be invisible.
So if you have any problem with a clip not importing correctly into a sequence in after effects, check to make sure "scale to frame size" is not applied to the clip in premiere pro.
I removed the scale to frame size in the premiere project and now everything imports fine into after effects.
Sorry for the post.

Dissolves imported from Premiere project not working in After Effects

When I import a Premiere project into After Effects all the dissolves turn into separate layers (black solids). There is no opacity information being imported for some reason.

What version of Premiere created the project you're importing?

Arbitrary data param not importing from Premiere Pro project into After Effects.

Hi,
I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
PF_Arbitrary_NEW_FUNC
PF_Arbitrary_DISPOSE_FUNC
PF_Arbitrary_COPY_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLATTEN_FUNC
PF_Arbitrary_UNFLATTEN_FUNC
PF_Arbitrary_INTERP_FUNC
PF_Arbitrary_COMPARE_FUNC
PF_Arbitrary_PRINT_SIZE_FUNC
PF_Arbitrary_PRINT_FUNC
PF_Arbitrary_SCAN_FUNC
The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
Thanks.

Some kind of answer would be awesome... there are Adobe staff members on here right?

Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

Kryan73 wrote:
… after I import a new file, I have to then go searching for it amid all the other files…
in a perfect world, you do know the recording date, and you simply scroll to that date.
in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
(I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

Distortion after importing to premiere

Similar Messages

Maybe you are looking for