Distortion and speedup of recording-repairable?

Totally new to GB as my PT kneeled, I made a recording in BG which seemed ok at the moment I recorded. But, getting back to it, the track (spoken voice) was distorted and sped up in tempo. Looking at the track info, it says no effects are added, so what can this be?
Recorded via M-box.
Can it be saved? Very very greatful for help as this is an important track for a project.
Ibook Mac OS X (10.4.7)

If you clipped the incoming signal, then there's probably no way to repair it. Once clipped, it is clipped.

Similar Messages

After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library but they are still distorted. Has anyone else experienced this and found a solution?

After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library, rebuliding and repairing the thumbnails but they are still distorted. Has anyone else experienced this and found a solution?

What upgrade did you apply? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

Upgrade from Snow Leopard to Mavericks failed - disk is damaged and can't be repaired.

Hello,
I'm afraid the answer is exactly what I don't want. But here is my situation.
I've been trying to download and install Mavericks - I was running Snow Leopard. My system was working fine - I wanted to upgrade so that I could run a game on it - but it required Mavericks.
Finally, it looked like Mavericks was installing. Once I restarted my computer, I got the following message:
"Install Failed. OS X could not be installed on your computer (there's a big scary yellow triangle with an exclaimation point in it below this). The OS X upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired. After your computer restarts, back up your data, erase your disk, and try installing again. Click Restart to restart your computer and try installing again."
Every time I restart, I get the same message, I can't back up my data and erase my disk like it wants me to; it won't let me. I can't get back to my normal computer. I've tried restarting in Safe Mode, but it doesn't work - it just keeps restarting over and over again. If my computer is really this determined to not let me have Mavericks, fine, but I at least want my old computer back. As it is now, I can't do anything on it besides restart it.
If I could just get to Finder, I could save some files and just reformat it - if the hard disk can be repaired. Even if it can't, I just need my documents. Here is the Installer Log:
Jun 13 11:30:49 localhost opendirectoryd[101]: opendirectoryd (build 339.100.2) launched - installer mode
Jun 13 11:30:49 localhost opendirectoryd[101]: Logging level limit changed to 'notice'
Jun 13 11:30:50 localhost opendirectoryd[101]: Initialize trigger support
Jun 13 11:30:50 localhost opendirectoryd[101]: created endpoint for mach service 'com.apple.private.opendirectoryd.rpc'
Jun 13 11:30:50 localhost opendirectoryd[101]: set default handler for RPC 'reset_cache'
Jun 13 11:30:50 localhost opendirectoryd[101]: set default handler for RPC 'reset_statistics'
Jun 13 11:30:50 localhost opendirectoryd[101]: set default handler for RPC 'show'
Jun 13 11:30:50 localhost opendirectoryd[101]: starting endpoint for service 'com.apple.private.opendirectoryd.rpc'
Jun 13 11:30:51 localhost opendirectoryd[101]: no dynamic data found at '/System/Library/OpenDirectory/DynamicData/Configure.plist'
Jun 13 11:30:51 localhost opendirectoryd[101]: Registered node with name '/Configure' as hidden
Jun 13 11:30:51 localhost opendirectoryd[101]: no dynamic data found at '/System/Library/OpenDirectory/DynamicData/Local.plist'
Jun 13 11:30:51 localhost opendirectoryd[101]: Registered node with name '/Local' as hidden
Jun 13 11:31:32 localhost Unknown[352]: kern.boottime: { sec = 1402684227, usec = 0 } Fri Jun 13 11:30:27 2014
Jun 13 11:31:33 localhost Unknown[363]: Launching the Language Chooser for an OS Install
Jun 13 11:31:56 localhost Language Chooser[364]: Waiting for prepaired devices to appear
Jun 13 11:32:09 localhost Language Chooser[364]: Prepaired wait done.
Jun 13 11:32:10 localhost Unknown[365]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Jun 13 11:32:10 localhost Unknown[365]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Jun 13 11:32:10 localhost Unknown[365]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Jun 13 11:32:10 localhost Unknown[365]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Jun 13 11:32:10 localhost Language Chooser[364]: Set keyboard to id: 0
Jun 13 11:32:10 localhost Language Chooser[364]: Found primary language hint "en"
Jun 13 11:32:10 localhost Language Chooser[364]: Could not write to /var/log/CDIS.custom
Jun 13 11:32:11 localhost Unknown[365]: Setting boot completed.
Jun 13 11:32:11 localhost Language Chooser[364]: Launching the Installer using language code "en"
Jun 13 11:32:12 localhost OSInstaller[380]: LSExceptions [0x7f7fd3529060] loaded
Jun 13 11:32:12 localhost OSInstaller[380]: OS X Installer application started
Jun 13 11:32:12 localhost OSInstaller[380]: 1 display(s) found.
Jun 13 11:32:12 localhost OSInstaller[380]: Display[1] is NOT using OpenGL acceleration.
Jun 13 11:32:12 localhost OSInstaller[380]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 13 11:32:12 localhost OSInstaller[380]: @(#)PROGRAM:OS X Installer PROJECT:OSInstaller-525
Jun 13 11:32:12 localhost OSInstaller[380]: Hardware: MacBookPro4,1 @ 2.50 GHz (x 2), 4096 MB RAM
Jun 13 11:32:12 localhost OSInstaller[380]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 13 11:32:12 localhost OSInstaller[380]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 13 11:32:12 localhost OSInstaller[380]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 13 11:32:12 localhost OSInstaller[380]: Env: PWD=/
Jun 13 11:32:12 localhost OSInstaller[380]: Env: SHLVL=1
Jun 13 11:32:12 localhost OSInstaller[380]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 13 11:32:12 localhost OSInstaller[380]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 13 11:32:12 localhost OSInstaller[380]: Env: OS_INSTALL=1
Jun 13 11:32:12 localhost OSInstaller[380]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 13 11:32:12 localhost OSInstaller[380]: Env: __CHECKFIX1436934=1
Jun 13 11:32:14 localhost OSInstaller[380]: Using product PKSecureNetEnabledProduct <file:///Volumes/Macintosh%20HD/OS%20X%20Install%20Data/> at distance 5
Jun 13 11:32:14 localhost OSInstaller[380]: Opening OSInstall automation file '/Volumes/Macintosh HD/OS X Install Data/minstallconfig.xml'.
Jun 13 11:32:14 localhost OSInstaller[380]: Got dist path: /System/Installation/Packages/OSInstall.mpkg
Jun 13 11:32:15 localhost OSInstaller[380]: Using product <OSInstallRootProduct> at distance 5
Jun 13 11:32:15 localhost OSInstaller[380]: Using product <OSInstallDVDProduct> based on media at /Volumes/Mac OS X Install DVD at distance 5
Jun 13 11:32:16 localhost OSInstaller[380]: /Volumes/Macintosh HD/OS X Install Data/MacOSXInstaller.choiceChanges file found.
Jun 13 11:32:16 localhost OSInstaller[380]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 13 11:32:17 localhost OSInstaller[380]: V /Volumes/Macintosh HD: DSDB found.
Jun 13 11:32:17 localhost OSInstaller[380]: Automated Install: Found requested target at /Volumes/Macintosh HD.
Jun 13 11:32:17 localhost OSInstaller[380]: Applied choice changes from /Volumes/Macintosh HD/OS X Install Data/MacOSXInstaller.choiceChanges.
Jun 13 11:32:17 localhost Unknown[365]: objc[380]: Class SleepTimerCallback is implemented in both /System/Installation/CDIS/OS X Installer.app/Contents/MacOS/OS X Installer and /System/Installation/CDIS/OS X Installer.app/Contents/Resources/OSXInstallAssistant.bundle/Contents/MacOS/OSXI nstallAssistant. One of the two will be used. Which one is undefined.
Jun 13 11:32:17 localhost OSInstaller[380]: Allowing machine sleep.
Jun 13 11:32:17 localhost OSInstaller[380]: Preventing machine sleep.
Jun 13 11:32:17 localhost OSInstaller[380]: InstallerStatusNotifications plugin loaded
Jun 13 11:32:17 localhost OSInstaller[380]: =============================================================================== =
Jun 13 11:32:17 localhost OSInstaller[380]: Choices selected for installation:
Jun 13 11:32:17 localhost OSInstaller[380]:           Install: "OS X"
Jun 13 11:32:17 localhost OSInstaller[380]:                     BaseSystemBinaries.pkg : com.apple.pkg.BaseSystemBinaries : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     BaseSystemResources.pkg : com.apple.pkg.BaseSystemResources : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     OSInstall.mpkg : com.apple.mpkg.OSInstall : 10.9.0
Jun 13 11:32:17 localhost OSInstaller[380]:                     Essentials.pkg : com.apple.pkg.Essentials : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     BSD.pkg : com.apple.pkg.BSD : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     JavaTools.pkg : com.apple.pkg.JavaTools : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     AdditionalEssentials.pkg : com.apple.pkg.AdditionalEssentials : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     AdditionalSpeechVoices.pkg : com.apple.pkg.AdditionalSpeechVoices : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     AsianLanguagesSupport.pkg : com.apple.pkg.AsianLanguagesSupport : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     MediaFiles.pkg : com.apple.pkg.MediaFiles : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     JavaEssentials.pkg : com.apple.pkg.JavaEssentials : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     OxfordDictionaries.pkg : com.apple.pkg.OxfordDictionaries : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     X11redirect.pkg : com.apple.pkg.X11redirect : 10.9.0.1.1.1306847324
Jun 13 11:32:17 localhost OSInstaller[380]:                     OSInstall.pkg : com.apple.pkg.OSInstall : 10.9.0.1
Jun 13 11:32:17 localhost OSInstaller[380]: =============================================================================== =
Jun 13 11:32:17 localhost OSInstaller[380]: It took 0.00 seconds to summarize the package selections.
Jun 13 11:32:17 localhost OSInstaller[380]: Memory statistics for 'Installing' pane:
Jun 13 11:32:17 localhost OSInstaller[380]: Physical Memory Allocation:   269 MB wired,     3 MB trapped,   290 MB active,   132 MB inactive, 3402 MB free, 3824 MB usable, 4096 MB total
Jun 13 11:32:18 localhost OSInstaller[380]: Remote Install Assistant found at :(null)
Jun 13 11:32:18 localhost OSInstaller[380]: Memory statistics for 'Install OS X' pane:
Jun 13 11:32:18 localhost OSInstaller[380]: Physical Memory Allocation:   269 MB wired,     2 MB trapped,   291 MB active,   132 MB inactive, 3402 MB free, 3825 MB usable, 4096 MB total
Jun 13 11:32:18 localhost Unknown[365]: 2014-06-13 11:32:18.321 OS X Installer[380:303] *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Jun 13 11:32:18 localhost Unknown[365]: 2014-06-13 11:32:18.322 OS X Installer[380:303] *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Jun 13 11:32:19 localhost OSInstaller[380]: Failed to delete automation file: The volume “Macintosh HD” is read only.
Jun 13 11:32:20 localhost Unknown[365]: Keyboard Layouts: duplicate keyboard layout identifier -16899.
Jun 13 11:32:20 localhost Unknown[365]: Keyboard Layouts: keyboard layout identifier -16899 has been replaced with -28673.
Jun 13 11:32:20 localhost Unknown[365]: Keyboard Layouts: duplicate keyboard layout identifier -16900.
Jun 13 11:32:20 localhost Unknown[365]: Keyboard Layouts: keyboard layout identifier -16900 has been replaced with -28674.
Jun 13 11:32:23 localhost OSInstaller[380]: LSExceptions [0x7f7fd3529060] unloaded
Jun 13 11:32:24 localhost OSInstaller[380]: Dist disk is not root.
Jun 13 11:32:24 localhost OSInstaller[380]: Set authorization level to root for session
Jun 13 11:32:24 localhost runner[384]: Administrator authorization granted.
Jun 13 11:32:24 localhost OSInstaller[380]: Recovery system image located at "/Volumes/Mac OS X Install DVD/BaseSystem.dmg"
Jun 13 11:32:24 localhost OSInstaller[380]: V /Volumes/Macintosh HD: DSDB found.
Jun 13 11:32:24 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/BaseSystemBinaries.pkg (556750848 b)
Jun 13 11:32:24 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/BaseSystemResources.pkg (366475264 b)
Jun 13 11:32:24 localhost OSInstaller[380]: IF will install package file://localhost/System/Installation/Packages/OSInstall.mpkg (0 b)
Jun 13 11:32:24 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/Essentials.pkg (4711998464 b)
Jun 13 11:32:24 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/BSD.pkg (728622080 b)
Jun 13 11:32:24 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/JavaTools.pkg (94208 b)
Jun 13 11:32:24 localhost OSInstaller[380]: IF will install package file://localhost/System/Installation/Packages/OSInstall.mpkg (0 b)
Jun 13 11:32:24 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/AdditionalEssentials.pkg (163948544 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/AdditionalSpeechVoices.pkg (293543936 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/AsianLanguagesSupport.pkg (4018176 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/MediaFiles.pkg (235410432 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/JavaEssentials.pkg (6665216 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/OxfordDictionaries.pkg (102292480 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/X11redirect.pkg (3472384 b)
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install package file://localhost/System/Installation/Packages/OSInstall.pkg (0 b)
Jun 13 11:32:25 localhost OSInstaller[380]: Setting external root to: /
Jun 13 11:32:25 localhost OSInstaller[380]: OSI: com.apple.pkg.BaseSystemResources remapped external root path to: /
Jun 13 11:32:25 localhost OSInstaller[380]: Total install size including padding: 8247033856 b + 0 b non-OS collection items
Jun 13 11:32:25 localhost OSInstaller[380]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 13 11:32:25 localhost OSInstaller[380]: PK will install signed package file:///Volumes/Macintosh%20HD/OS%20X%20Install%20Data/OSX_10_9_IncompatibleApp List.pkg
Jun 13 11:32:25 localhost OSInstaller[380]: PFPackage::packageWithURL - can't instantiate package: /System/Installation/Packages/OSInstall.mpkg
Jun 13 11:32:25 localhost OSInstaller[380]: Error opening package "OSInstall.mpkg".
Jun 13 11:32:25 localhost OSInstaller[380]: V /Volumes/Macintosh HD: DSDB found.
Jun 13 11:32:25 localhost OSInstaller[380]: V /Volumes/Macintosh HD: DSDB found.
Jun 13 11:32:25 localhost OSInstaller[380]: Starting installation:
Jun 13 11:32:25 localhost OSInstaller[380]: Performing volume consistency check on 'Macintosh HD'.
Jun 13 11:32:25 localhost OSInstaller[380]: Checking Volume
Jun 13 11:32:26 localhost OSInstaller[380]: Checking file system
Jun 13 11:32:26 localhost OSInstaller[380]: Checking Journaled HFS Plus volume.
Jun 13 11:32:26 localhost OSInstaller[380]: Checking extents overflow file.
Jun 13 11:32:50 localhost OSInstaller[380]: The volume Macintosh HD could not be verified completely.
Jun 13 11:32:50 localhost OSInstaller[380]: Verify/Repair failed with error -69845 (File system verify or repair failed)
Jun 13 11:32:50 localhost OSInstaller[380]: Install failed: The OS X upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired. After your computer restarts, back up your data, erase your disk, and try installing again.
Jun 13 11:32:51 localhost OSInstaller[380]: V /Volumes/Macintosh HD: DSDB found.
Jun 13 11:32:52 localhost Unknown[365]: Error while setting volume information for /Volumes/Macintosh HD
Jun 13 11:32:52 localhost Unknown[365]: Can't set Finder info fields for volume mounted at /Volumes/Macintosh HD: Read-only file system
Jun 13 11:32:52 localhost OSInstaller[380]: Failed to revert bless to disk Macintosh HD (2)
Jun 13 11:32:52 localhost OSInstaller[380]: Unable to revert bless to target or imgsrc.
Jun 13 11:32:52 localhost OSInstaller[380]: Allowing machine sleep.
Jun 13 11:32:52 localhost OSInstaller[380]: Memory statistics for 'Install Failed' pane:
Jun 13 11:32:52 localhost OSInstaller[380]: Physical Memory Allocation:   273 MB wired,     4 MB trapped,   375 MB active,   126 MB inactive, 3318 MB free, 3819 MB usable, 4096 MB total
Jun 13 11:41:53 localhost OSInstaller[380]: System requested sleep.
Jun 13 11:41:53 localhost OSInstaller[380]: Installer allowed sleep.
Jun 13 11:41:54 localhost OSInstaller[380]: System is going to sleep.
Jun 13 11:51:05 localhost OSInstaller[380]: System awoke from sleep.
Jun 13 12:10:41 localhost OSInstaller[380]: System requested sleep.
Jun 13 12:10:41 localhost OSInstaller[380]: Installer allowed sleep.
Jun 13 12:10:41 localhost OSInstaller[380]: System is going to sleep.
Jun 13 12:10:41 localhost OSInstaller[380]: System awoke from sleep.
Jun 13 12:31:06 localhost OSInstaller[380]: System requested sleep.
Jun 13 12:31:06 localhost OSInstaller[380]: Installer allowed sleep.
Jun 13 12:31:06 localhost OSInstaller[380]: System is going to sleep.
Jun 13 12:35:20 localhost OSInstaller[380]: System awoke from sleep.
Jun 13 12:35:39 localhost Unknown[365]: 2014-06-13 12:35 OS X Installer[380] (CarbonCore.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102)
Jun 13 12:35:42 localhost OSInstaller[380]: Connection to sharingd became invalid
Jun 13 12:35:42 localhost Unknown[365]: 2014-06-13 12:35:42.925 OS X Installer[380:7947] Metadata.framework [Error]: couldn't get the client port
Jun 13 12:35:43 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (docs) while running as uid 0
Jun 13 12:35:49 localhost OSInstaller[380]: CoreServices logging is enabled,
Jun 13 12:35:49 localhost OSInstaller[380]: SFL Favorites initialized.
Jun 13 12:36:03 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun 13 12:36:03 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun 13 12:36:04 localhost OSInstaller[380]: Connection to sharingd became invalid
Jun 13 12:36:04 localhost OSInstaller[380]: Connection to sharingd became invalid
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1 - Client: coreservicesd, UID: 0, EUID: 0, GID: 0, EGID: 0
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1 - ODNodeCreateWithNameAndOptions request, SessionID: 00000000-0000-0000-0000-000000000000, Name: /Local/Default, Options: 0x0
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1 - loading configuration for '/Local' from '/System/Library/OpenDirectory/Configurations/Local.plist'
Jun 13 12:36:04 localhost opendirectoryd[101]: Loaded bundle at path '/System/Library/OpenDirectory/Modules/PlistFile.bundle'
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1 - unable to find authentication module 'AppleID'
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1 - unable to find authentication module 'ConfigurationProfiles'
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1 - unable to find service discovery callback for module 'PlistFile'
Jun 13 12:36:04 localhost opendirectoryd[101]: Registering for network changes
Jun 13 12:36:04 localhost opendirectoryd[101]: Registered subnode with name '/Local/Default'
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1.2 - Block: nodestate '/Local/Default'
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1.2, Module: PlistFile - Node is 10.7 or later
Jun 13 12:36:04 localhost opendirectoryd[101]: 101.3 - Block: nodestate '/Local'
Jun 13 12:36:04 localhost opendirectoryd[101]: failed to open local node for internal record copy
Jun 13 12:36:04 localhost opendirectoryd[101]: Registering for power changes
Jun 13 12:36:04 localhost opendirectoryd[101]: Registering for network power changes
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1.2 - nodestate - flagging '/Local/Default' online
Jun 13 12:36:04 localhost opendirectoryd[101]: 101.3 - nodestate - flagging '/Local' online
Jun 13 12:36:04 localhost opendirectoryd[101]: 101.3 - Block completed
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1.2 - Block completed
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1, Node: /Local/Default - node assigned UUID - 97F1B07F-4A5E-43DA-9AB8-480F91C37B68
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.1, Node: /Local/Default - ODNodeCreateWithNameAndOptions completed
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.4 - Client: coreservicesd, UID: 0, EUID: 0, GID: 0, EGID: 0
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.4 - ODQueryCreateWithNode request, NodeID: 97F1B07F-4A5E-43DA-9AB8-480F91C37B68, RecordType(s): dsRecTypeNative:config, Attribute: dsAttrTypeStandard:RecordName, MatchType: EqualTo, Equality: CaseExact, Value(s): SharePoints, Requested Attributes: dsAttributesAll, Max Results: 1
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.4, Node: /Local/Default, Module: PlistFile - client is using a native record type 'config' which is not portable
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.4, Node: /Local/Default, Module: PlistFile - client is using a native record type 'config' which is not portable
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.4, Node: /Local/Default, Module: PlistFile - ODQueryCreateWithNode completed
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.5 - Client: coreservicesd, UID: 0, EUID: 0, GID: 0, EGID: 0
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.5 - ODNodeCreateRecord request, NodeID: 97F1B07F-4A5E-43DA-9AB8-480F91C37B68, RecordType: dsRecTypeNative:config, RecordName: SharePoints, Attributes: <none>
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.5, Node: /Local/Default, Module: PlistFile - client is using a native record type 'config' which is not portable
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.5, Node: /Local/Default, Module: PlistFile - ODNodeCreateRecord completed, delivered 1 result
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6 - Client: coreservicesd, UID: 0, EUID: 0, GID: 0, EGID: 0
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6 - ODQueryCreateWithNode request, NodeID: 97F1B07F-4A5E-43DA-9AB8-480F91C37B68, RecordType(s): dsRecTypeNative:config/SharePoints, Attribute: dsAttrTypeStandard:RecordName, MatchType: Any, Equality: CaseExact, Value(s): dsRecordsAll, Requested Attributes: dsAttrTypeStandard:GeneratedUID,dsAttrTypeNative:ftp_guestaccess,dsAttrTypeNati ve:smb_name,dsAttrTypeNative:sharepoint_account_uuid,dsAttrTypeNative:smb_create mask,dsAttrTypeNative:sharepoint_version,dsAttrTypeStandard:AppleMetaNodeLocatio n,dsAttrTypeNative:afp_guestaccess,dsAttrTypeNative:afp_shared,dsAttrTypeStandar d:RecordType,dsAttrTypeNative:ftp_shared,dsAttrTypeNative:afp_name,dsAttrTypeNat ive:smb_oplocks,dsAttrTypeNative:afp_use_parent_owner,dsAttrTypeNative:smb_direc torymask,dsAttrTypeStandard:RecordName,dsAttrTypeNative:afp_use_parent_privs,dsA ttrTypeNative:smb_guestaccess,dsAttrTypeNative:smb_inherit_permissions,dsAttrTyp eStandard:AppleMetaRecordName,dsAttrTypeNative:smb_shared,dsAttrTypeNative:direc tory_path,dsAttrTypeNative:smb_strictlocking,dsAttrTypeNative:sharepoint_group_i d,dsAttrTypeNative:ftp_name, Max Results: 2147483647
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6, Node: /Local/Default, Module: PlistFile - client is using an old record type 'dsRecTypeNative:config/SharePoints' should be using kODRecordTypeSharePoints
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6, Node: /Local/Default, Module: PlistFile - client is using an old record type 'dsRecTypeNative:config/SharePoints' should be using kODRecordTypeSharePoints
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6, Node: /Local/Default, Module: PlistFile - flushing record '/private/var/db/dslocal/nodes/Default/config/SharePoints'
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6, Node: /Local/Default, Module: PlistFile - ___index_record_block_invoke: sqlite3_prepare_v2: 21
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6, Node: /Local/Default, Module: PlistFile - ___index_record_block_invoke: sqlite3_prepare_v2: 21
Jun 13 12:36:04 localhost opendirectoryd[101]: 243.6, Node: /Local/Default, Module: PlistFile - ODQueryCreateWithNode completed
Jun 13 12:36:04 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun 13 12:36:04 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun 13 12:36:04 localhost Unknown[365]: 2014-06-13 12:36 OS X Installer[380] (CarbonCore.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102)
Jun 13 12:36:08 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun 13 12:36:08 localhost OSInstaller[380]: Folder Manager is being asked to create a folder (down) while running as uid 0
Jun 13 12:36:08 localhost OSInstaller[380]: LSExceptions [0x7f7fd5069800] loaded
Jun 13 12:36:19 localhost OSInstaller[380]: LSExceptions [0x7f7fd5069800] unloaded
Thank you for any help you can give me.

You are never going to have the option to repair a disk if you are booted from the same disk.
I think the place to start is boot off your Snow Leopard DVD install disk by holding down the C key on boot up.
Under Utilities drop down menu you will have access to Disk Utility.
From here you will have the option to repair Disk (ie not grayed out.)
option: Either insert and wait for the Mac OS X Install DVD window and double-click the Install icon; or power down, then start up while holding down the "C" key. Either way, that takes a few minutes.

2007 MacBook Pro Screen becomes distorted and Computer becomes unresponsive

Hi,
I am wondering if anyone else has experienced this. This is hard to explain with words alone, but I will try: I'll be using my 2007 MacBook Pro with no problems, when all of a sudden the screen will start to flicker and the display will become distorted where everything seems like it is tapering into seperate small rectangles. If I am playing music through any application (iTunes, Safari, Ableton Live, Adobe Premiere, etc.) the music will continue to play and I can still move the mouse around but I cannot click on anything or stop the music and none of my keyboard brightness or volume commands will function. Basically it's a partial freeze. This is very troubling as it is becoming more and more frequent. I did drop my computer once a year and a half ago but have not had any trouble of this sort (or at all for that matter) until about 2 months ago, so I'm not sure if this is related. It happened to me twice before I upgraded to 10.6.4 from 10.4.11, only then it was more serious and when I rebooted afterwards it would give me that ominous gray screen with the restart logo and several languages saying I needed to shut it down. Now when it happens I can restart my computer just fine (assuming I force shut it down with the power button for 6 seconds), but sometimes when it restarts the weird screen effect I described will happen during start up and then go away once it is running again. If anyone has any idea what is causing this please let me know, this computer is very important to me, as I do 85% of my work on it. Help! Thanks!!!!
Matt

Welcome!
You may have the "nVidea Curse." Here is an Apple article explaining the issue and providing for free repair for a period to four years from data of purchase:
http://support.apple.com/kb/TS2377
It applies to MBPs with an nVidea 8600M GT graphics chipset. Apple Store have a diagnostic test for teh problem.

Audigy 2 zs distorted and cracking so

hi..
I have audigy 2 zs platinum pro with gigaworks s750 speakers when I'm playing games and listen to MP3 music I get a lot of distorted and crack I just can get a clear sound try the newest driver but still all the same anyone can help.....

I think maybe you have your mic recording set on acti've. Go into windows control panel and double click the speaker icon/audio device settings. Click the audio tab on top, and then select volume in the "sound recording" section. Make sure that "Microphone" is not selected.

Screen distortion and crashes

I get a lot of screen distortion, and my iMac completely freezes or crashes. I get a video ram failure message when I run Techtool.
I've tried reinstalling the system, but it's still happening.
I had the logic board replaced while it was under warrantee, but I'm afraid it may need replacing again (pretty expensive even to do it myself).
Any thoughts???

One good generic troubleshooting step for this is to run Applejack.
Download:
http://sourceforge.net/projects/applejack/
Article on using:
http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
It runs in single user mode. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
You can also run tasks selectively and for specific users by typing in "applejack."
The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
I would also run the Hardware Test in extended. Disconnect all peripherals except the Keyboard and Mouse
http://support.apple.com/kb/ht1509
On your Mac, you can get to the Hardware Test simply by restarting holding down the D key.

Problems for download Recording Repair Assistant

Hi, yesterday (1 September 2014) was launched an update for Jaydeep's Recording Repair Assistant, the problem is that when i go to download it, i need to login on my.adobeconnect.com and i dont have any user for login for download it.
I work with about 1000 recordings of adobe connect every week, and always we have 3 or 4 with problems with audio or video that we repair with Jaydeep's Recording Repair Assistant.
Can anyone help us with an alternative link for download the update of Jaydeep's Recording Repair Assistant?
Thank you so much.
Eduardo.

Problem was solved, the link was fixed, we dont need loguin to download the software.
Here the link to download it:
https://my.adobeconnect.com/JRRA
Bye

Full Load" and "Full load with Repair full request"

Hello Experts,
Can any body share with me what is the difference between a "Full Load" and "Full load with Repair full request"?
Regards.

Hi......
What is function of full repair?? what it does?
How to delete init from scheduler?? I dont see any option like that in infopackage
For both of you question there is a oss note 739863-Repairing data in BW ..........Read the following.....
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
Other terms
Restore data, repair data
Reason and Prerequisites
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets.
And also search in forum, will get discussions on this
Full repair loads
Regarding Repair Full Request
Instead of doing of all these all steps.. cant I reload that failed request again??
If some goes wrong with delta loads...it is always better to do re-init...I mean dlete init flag...full repair..all those steps....If it is an infocube you can go for full update also instead of full repair...
Full Upload:
In full upload all the data records are fetched....It is similar to full repair..Incase of infocube to recover missed delta records..we can run full upload.....but in case of ODS does'nt support full upload and delta upload parallely...so inthis case you have to go for full repair...otherwise delta mechanism will get corrupted...
Suppose your ODS activation is failing since there is a Full upload request in the target.......then you can convert full upload to full repair using the program : RSSM_SET_REPAIR _ FULL_FLAG
Hope this helps.......
Thanks==points as per SDN.
Regards,
Debjani.....
Edited by: Debjani Mukherjee on Oct 23, 2008 8:32 PM

Audigy 2 ZS platinum sound distorted and muff

Too bad one cant rant as one might like in this forum. Had writtend all the details that transpired but when i pressed the submit post, my original post was lost due to expiration of time for my ticket.
Now, i use telegraph details.
Bought Audigy 2 ZS platinum, bad sound Distorted and muffled from the speakers except center speaker and no sound at all from rear center speaker. Same setup using Audigy Platinum, zero problems.
Using
Asus a7n8x-e Deluxe MB
024GB PC3200 Ram
ATI 9800 Pro AIW
Sound blaster Audigy 2 ZS Platinum
Creative DDTS-00 Decoder
Creative Inspire 6600 Speakers/Creative Inspire 5300 Speakers

Fabrizziov,
Is the sound muffled and distorted when you plug headphones into the headphone out on the platinum dri've? If not, plug the headphones into the sound card's front output and run a speaker test to see if it is muffled and distorted from there. If it is then it is most likely a problem with the card's hardware. If this is the case I would suggest exchanging it for another through your retailer. You can also contact support for a repair if needed. Their contact information is at http://us.creative.com/support/custsup.
Jeremy

IOS 6.1.2 STILL does not fix massively distorted and compressed audio from videos

I bought an iPad to show prospective clients my video and audio recording services.
Ever since changing to iOS 6 the audio from all the videos that I have put on the iPad are completely
distorted and overly comressed. The slightest bass note and everything is garbled beyond belief.
The same videos on my iPhone 4 sound wonderful as they should, but the same videos on the iPad
are completely wasted. Playing the sound through the built in speaker of the iPad proves good, but
the headphone output is horrible. Audio from other sources is clean and undistorted.
I spoke to Apple Care about six times, and two different Senior Advisors neither of which did anything for me.
I had the local Apple store replace the iPad but that made no difference.
I now have two iPads and they both have the same exact issue.
It's just pathetic that Apple has not addressed this.
Dan

Addressed an issue that only you seem to be having?
Apple offers great service but not this personalized.
I have never had this issue and I transfer or watch a lot of video to my iPad.

The sound on my ipad3 has become very distorted and I cannot listen to anything requiring sound. The ipad3 is workeing normally other than the sound.

can anyone help please, turned on my ipad 3 and wanted to listen tomusic,but for some reason the sound has become distorted and impossible to hear music. it was working ok until today, I dont know why it has all gone distorted. help anyone please. Thank you, Marian.

Is it on mute? What IOS do you have?
IOS 7.0+: open control center (swipe from under to top) and tap on the bell.
Or, if it has the lock button instead if the bell, switch the switch on your iPad to unmute / mute
IOS 6 and under: Go to settings>General> USE SIDE SWITCH TO and click mute.
Then switch the switch. You're unmuted.
If it still doesn't work, go to a repair shop or apple so they can change the speakers of your iPad.
~sincerely,
Ab

Sound distorted and no control when using akg k451's with 'in line remote' cable

Just bought a pair of AKG k451 headphones from Amazon.
The headphones come with 2 different cables, a standard cable, and one with an 'in line remote' for use with Apple products.
The sound is fine with the standard cable, but if I use the 'in line' cable, the sound is distorted and there is no control of volume or play/pause function.
I'm sure I have a problem with my iPhone 4S, as it works fine with both my wifes 4s and my ipad 2.
It almost as if my phone does not like anything with a 'in line' remote.
I'm running latest iOS etc and my phone is over 2 years old.
Is this something that can be fixed, or will I need a new phone?
Any suggestions would be grateful.

shortytenshi,
Caveat--I haven't tried this kind of hookup, and you didn't mention what Soundcard or game console you are using. But let me see if I understand correctly. You have two female RCA audio connectors on your game console. I'm guessing you ran two male-male RCA cables from the console to the two female RCA jacks on the Y splitter. And then you put the stereo plug of the Y-splitter into the Line-In of your SoundBlaster card (what card do you have?) You said you tested the cables, but you mentioned the female jacks, so I assume you mean that you tested the Y-Splitter. Have you verified that the male-male cables are intact and that your game console is puting out stereo on them? And do you have your speakers set to 2.0 and Line-In selected as your REC source and unmuted as your Playback source? Some cards also have a left-right speaker balance. It also would help if you could try recording from some other stereo source both using the same and different cables to test whether the card Line-in jack or cables are at fault.

Distorting and clipping on burned CDs

I'm having problems with CDs that I've been burning. I've been making a lot of compilation CDs and haven't experienced problems before, but just recently I've noticed that a lot of the songs badly distort. These sound absolutely fine played from within itunes - it's when they are burned to a CD.
There is crackling, distortion and clipping at the top end which sounds horrible. I checked my itunes and the soundcheck and volume adjustment controls are disabled. The CD media is a good quality brand and the songs are ripped from CD (with error correction) or purchased from the iTMS.
iTunes is version 6.0.1 (3) with quicktime version 7.0.3. My mac is a revision B iMac G5 with a Matshita DVD-R UJ-845 superdrive (firmware rev DBN9). OS is 10.4.3
The song sources were in AIFF, mp3, apple lossless m4a and mpa and WAV formats. I checked the waveforms in Audacity for clipping but there was none in the original file. The CDs distort regardless of whether it's a cheap ghetto blaster, PC, Mac, stereo or home cinema system and the music ranges from hip-hop, dance and jazz to classical and acoustic. This seems to make no difference to the likelihood of distortion.
I've only noticed this problem going back to November.
G5 Dual 2.5

I am also having the same prob. I noticed though that
if I playback the burned CDs in my car, it sounds
okey. The ones I just burned from iTunes, if I play
it back within iTunes - they all have weird
distortions. So I guess it's a software bug not
hardware . . . then again, it could also be my
Superdrive . . .
Apollo
I was having the same problems, noise, noise and more noise right after I upgraded to iTunes 6. I checked in with my Mac consultant and she suggested I try repairing permissions. I did that and have had no problems since. I thought it was hardware based also, but I was wrong!
Here's what she sent me:
Here's how to repair permissions:
Open Applications > Utilities > Terminal
type this command:
sudo diskutil repairPermissions /
make sure there is a space before that slash
It will ask for your admin password
Good luck.
Brian
iMac Mac OS X (10.4.2)

When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

How do I backup to my external hd on 10.6.8 if the disk is damaged and can't be repaired?

Hi! So, I'll get straight to the point. I'm running 10.6.8 on my mac, which is about 5 years old. I attempted to install OSX Mavericks last night, so I could update some of my software. Anyways, the computer restarts and opens up the installer for OSX Mavericks, but after about a minute of installing, it shows that the Mavericks install failed. The upgrade couldn't be started because the disk Macintosh HD is damaged and can't be repaired.
Could someone tell me (step by step) how to back up all of my data, erase the disk, and install again? I have an external HD by the way.
Help would be much appreciated!

So, essentially you're saying that I need to download one of these programs to my external hd. But, how do I boot it from my mac if I can't get past the installation screen of Mavericks? I'm running on my other mac right now, if that helps. I've tried to use disk utility to repair, but it's greyed out. I honestly just want to retrieve all of my data, wipe the drive, and then install a new one. I just want to know how to do that.

Distortion and speedup of recording-repairable?

Similar Messages

Maybe you are looking for