Distortion when on speakerphone: help!

Hello,
My iPhone 3G has always been working wonderfully until a few days ago...I often use speakerphone during calls, but now suddenly when I switch speakerphone on, there is a loud distortion and the caller´s voice is breaking up, making calls impossible. The speaker works perfectly when using iPod and I can make calls successfully without the speakerphone and also with headphones. Is this a software or hardware problem? Anyone had the same issue?

Anyone with a suggestion? I am currently abroad and can not call apple support. I really hope it is a software problem and that i can solve it with your help?

Similar Messages

  • HELP!  My sound is distorted when I export from Final Cut Pro 10.3

    How do I use Compressor 4.1 with Final Cut Pro 10.3?  My sound is all distorted when I download!  HELP!!!

    You mean 10.0.3, I suppose. This is a VERY old version and it does not work in Mavericks; Compressor 4.1 is a recent version and maybe there is some incompatibility.
    You should update to 10.1.1, but 10.1 introduced significant changes. Before updating, follow these excellent recommendations and tutorials from Steve Martin and Mark Spencer:
    rippletraining.com/fcpx-features.html

  • Powerbook G4 Screen Distortion...please help me fix

    Hey all. This is my first post on this forum, because I haven't owned a Mac since 2009. But I come to this board often to troubleshoot when I am helping my friends/family with their Macs (yeah, i'm the 'computer guy'). Anyway, I now have a Mac that was given to me by a family member that has a very specific problem that I hope someone will be able to help me fix.
    It's a 2004 Powerbook G4 (A1046). It turns on, and I hear the chime, but the whole screen is distorted. It's weird because the screen flickers to a normal light blue screen for a second when it changes from the boot screen (with the spinning wheel) to the login screen, but then it remains distorted and I can barely make out anything on the screen. The computer works otherwise.
    Here's a link to my Youtube video showing exactly what is happening. http://youtu.be/Ce7bTYFKrdE (around 0:56 is where you can really see the distortion most clearly).
    I tried to see if it was a problem with the OS, but since I don't have an OS X install disc, I tried running a live CD of Linux (PowerPC version). I was able to run the live CD, but the distortion remained throughout. I also tried connecting it to my external monitor, but the same distortion appeared across both monitors.
    Any possible causes for this you guys can think of, or possible solutions, would be appreciated. Thanks in advance.

    Those are rather classic symptoms of video hardware failure. However, quite a few G4 PowerBooks and G5 iMacs whose serials numbers began with W8 experienced actual display screen failures.
    Both are bad because so many used parts now offered as repair parts were scavenged from defective computers.
    A test to sort whether the video hardware (not worth fixing) or the display unit (maybe worth fixing if you can get parts) is at play, connect an external  monitor. If the video defects reappear on the external monitor, the video hardware is shot and it is time to bid the computer a fond farewell. The video hardware is part of the logic board and replacement boards are scare can can cost as much as a used working Powerbook.
    If the problem does not appear on the external, the video hardware is fine but the display unit is bad. You will still be looking for a hard-to-find part. However, one could continue using the computer as a desktop model with the external monitor,
    PowerBooks are not easy to service at home. How clever are you with computers and small fiddly bits?

  • Generated Pulse waveform is distorted when I deliver the signal to the output port in the DAQmx

    Problem: Generated Pulse waveform is distorted when I deliver the signal to the output port in the DAQmx.
    Environment: Windows XP sp3 (32bit), Visual Studio 2010 sp1, NI-Measurement Studio 2010
    Device: NI - DAQmx PCI 6251
     Analog Input: 1.00MS/s multi-channel (aggregate)
     Analog Output: 2 Channel 2.00MS/s
    Reference Example: AO_ContGenVoltageWfm_IntClk / AI_ContAcqVoltageSamples_IntClk
    Generated Pulse:
    1) AO0 = Square Waveform /0-5V / 8KHz / 0.5㎲/sample / sample 50% Duty
    2) AO1 = Square Waveform /0-5V / 8KHz / 0.5㎲/sample / (Reverse Image)
    Description: I’d like to deliver the waveform stream satisfied with specified constraints to the 2 channel output port in the DAQmx. To verify accuracy of the generated waveform, I did an electrical wiring from the Analog output channel (2 channels) to the Analog Input channel (2 channels) in DAQmx. As a result of this experiment, I could get a result which has signal distortion. Since the waveform has to satisfy with both high frequency (8KHz) and very short moment interval time (△t = 0.5㎲/sample) between samples, I cannot handle some parameters of the function in the referenced VC++ example. Following formulas shows an approach to deliver the generate pulse waveform to output port satisfied with constraints.
    Analog Output Channel
     Frequency = 8,000 cycles/sec (constraint)
     Sample per Buffer = 2,000,000 = 2*106 samples/buffer
     Cycles per Buffer = 80,000 cycles/buffer
     Sample per Channel = 1,000,000 = 1*106 samples/channel
     Sample Rate  = Frequency * (Sample per Buffer / Cycle per Buffer)
                              = 8,000 * (2*106 / 80,000) = 2*106 samples / sec
     △t  = 1 sec / 2*106 samples / sec
               = 0.5 * 10-6 sec/sample (constraint)
     Buffer Cycle  = Sample Rate / Sample per Channel
                              = (2*106 samples / sec) / (1*106 samples/channel)
                              = 2 channel / sec
    Analog Input Channel
    Sample per Channel = 1,000,000 = 1*106 samples/channel
     Sample Rate  = 1 MS/s * (2 Channel) = 5 * 105 Samples / Sec
    Program Code
    AO_ContGenVoltageWfm_IntClk / AI_ContAcqVoltageSamples_IntClk (VC++ Example)
    Result: The proposed approach was implemented in the experiment environment (VS2010, MStudio2010). As shown in Figure 1, we could get the unsatisfied result. Although I intended to make a ‘square’ pulse wave, the result looks like ‘trapezoid’ pulse wave (Figure.1). However, there is other result which was undertaken with different parameter condition. It looks like the square shape not the trapezoid shape.
    Please let me know what the conditions make the problem of signal distortion. (AO0 = Green line / AO1 = Red line)
    [Figure. 1] Frequency 8000 Hz / Cycle per Buffer = 8000 Result
    [Figure. 2] Frequency 1000 Hz / Cycle per Buffer = 1000 Result
    Questions: Please let me know following questions.
    1) Is it possible to deliver the generated pulse wave satisfied with constraints (f= 8KHz), △t = 0.5㎲/sample) to the output port without distortion using PXI 6251?
    (Is it possible to solve the problem, if I use the LabView or MAX?)
    2) Are there some mistakes in the proposed approach? (H/W or S/W program)
    3) What is the meaning of the Cycle per Buffer?, It could effect to the result?

    Hi Brett Burger,
    Thanks for your reply. For your information, I have set the sampling rate as 10000 as for the sound format, I have set the bits per sample as 16 bit, the rate as 11025 and the sound quality as mono. I tried using your method by changing the sampling rate as 8K but still my program encounter the same problem.
    I wish to also create a button that is able to generate a preformatted report that contains VI documentation, data the VI returns, and report properties, such as the author, company, and number of pages only when I click on the button.  I have created this in my program, but I am not sure why is it not working. Can you help troubleshoot my program. Or do you have any samples to provide me. Hope to hear from you soon.
    Many thanks.
    Regards,
    min
    Attachments:
    Heart Sounds1.vi ‏971 KB

  • Firefox 5: distortion when scrolling on all web pages; wavey appearance

    There is distortion when scrolling on all webpages using Firefox 5. It doesn't matter how fast or slow the scrolling is, the screen becomes wavey until the scrolling stops. I have uninstalled and reinstalled Firefox and that hasn't helped. This does not happen using Safari or in any documents or spreadsheets opened outside the Firefox browser.

    '''''Its better to take a Screenshot of your Toolbars before performing the following suggestion.'''''
    Start Firefox in Safe Mode by Holding down the SHIFT key while Starting Firefox -> Safe Mode window will appear -> place Checkmark on 2nd option "Reset Toolbars and Controls" -> Click "Make Changes and Restart".
    Check and tell if its working.

  • Sound distorted when I listen to headphones since installing latest update

    Ever since installing the update on my iPhone 5s, the audio is distorted whenever I try to use headphones. The sound is fine until I plug my headphones in, at which point it sounds muffled as if I am listening to the music through the walls.  I have not damaged my phone recently and also tried this with two different pairs of headphones. Both headphones work fine when I plug them into other items; it only gets distorted when I plug in headphones. Please help!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Photos distorted when imported in Leopard, yet ok in Tiger - why??

    I use a Powermac G5 dual processor (non-intel), and find that any photos I import are distorted when viewed or printed. Yet if I boot from an external HD with OS X 10.4 those same photos are fine, and remain so even after restarting from the Powermac HD and viewing them within the external HD.. Reading some other posts it seems that OS X 10.5 may have been corrupted by an update at some point - any help or advice on this would be appreciated!

    I would agree, I don't think it's an iphoto issue at all, I dont use that application to any great extent and regardless of the application used the photos are distorted.
    I have tried a full re-install of OS X 10.5 but no change. I needed more disk space so have now got a larger HD to install, but I wonder if re-installing while preserving the user settings etc is part of the problem (which was the approach I took)? Im reluctant to do a fresh install mainly because I don't know what would be involved once the system is reinstalled!

  • Illustrator Files get Distorted when Distilled into PDFs

    I haven't been able to find anything like this in the discussions so I will start one. The production folks are using CS3 on Leopard Macs. I am using Tiger and can still reproduce the problem, so I don't think it is the OS.
    Here's what happens:
    Certain .ai files placed in InDesign become distorted when the user makes a PDF either by using Acrobat Distiller or through our DALiM TWiST server. The distortion does not happen if they export to PDF, but they cannot do that since they must use the TWiST system to preflight their files and create the PDFs. The problem is likely related to the postscript stage of both of these methods of making PDFs. It does not happen to all .ai files that we use. Just some of them. It seems to be random, but with newer (CS3-created) Illustrator files as opposed to CS2 or earlier files. The current workaround is to just save the files as Illustrator eps and then they have no problem, but we are trying to get away from always using eps files.
    Has anyone ever had anything like this happen?
    Thanks,
    Laura K.

    Wow, you guys are great. Very helpful. The users who have reported this issue have already discovered the workaround of embedding the problem files. That does work. Their problem is that they don't know ahead of time which .ai files will do this. I suppose they could just embed all .ai files as they use them, but one user reports that the embedded files don't "stay" embedded. They use a droplet that was created for them where they just drop a job to be printed onto it and it will go through the TWiST workflow. It is a highly customized workflow, and we plan to have the engineer come back in and do some tweaking eventually. I think there is something in the droplet that can be altered so embedded .ai files will stay embedded. I suspect that is probably easy if you know what you are doing. :-)
    But, meanwhile I was just wondering if there was maybe something we could do at the .ai file creation end to prevent the distortion from happening int he first place. The bad part is that it does not happen to all .ai files in our library, just a few of them. The same user reported a couple of years ago when we switched to InDesign that she had problems with .pdf files placed into InDesign printing properly and I think this is related to that.
    Here are a couple of screenshots to illustrate what happens as far as the distortion. I have used one of our company's logo files that has been exhibiting the behavior as the example. The first screenshot (InDesignLogos) just shows the logo placed in an InDesign file as it should look. The bottom one has been embedded. The second screenshot (PDFLogos) shows the resulting PDF that was created using DALiM TWiST. Keep in mind that we also get the same result if we make a PDF using Acrobat Distiller. This is why I think it is something happening in the postscript file. I wish we could just export the PDF from InDesign because that takes care of the problem, but it is not an option with the TWiST workflow. The Illustrator file says it was created on Oct 26, 2009, saved as v.13 Created by v.13.02, if that helps.
    Thanks for all of your help and good suggestions so far!
    Laura K.

  • Distorted when exported

    I am designing version 2.0 of my website, I decided to use a
    flash header. Everything is fine while viewing the movie in the
    Flash editor, and while running it on the timeline, but as soon as
    you test movie, or export/publish it; I get a 1 pixel distorted
    line going through the left hand side of the header. I have put
    JPEG quality up to 100% and everything is set to BEST. when at the
    site, if you zoom into the distorted area the distortion goes away.
    any help is appreciated. I am using Flash MX Version: 6.0
    Thanks in advance.
    here is my site:
    http://s170193323.onlinehome.us/v2/index.php

    Thanks for replying Terence. I've seen the problem on Mac and Windows, using Firefox or Safari. I've tried some other methods, but gotten similar results:
    * Using Aperture to publish from a gallery template
    * Using iPhoto to export a photo album to iWeb which I publish to a folder
    * Publishing from iWeb to .Mac web page
    * Publishing from iWeb to a .Mac Web Gallery
    - Here is another example
    Are there issues with resizing photos? I typically do 5x7 in iPhoto, but have read Apple services are optimized to 800x600?
    Tried posting to the iPhoto, iWeb, and Aperture forums, but no progress yet.

  • Since updating to 18.0 for mac, my scrollbar has been distorting when scrolling; started ~2 days after updating.

    The odd thing is that it is an on and off issue, meaning that sometimes the scrollbar distorts when scrolling, and sometimes it doesn't, and it started doing this about 2 days after updating. It didn't start immediately, which I find kind of odd. Is this just a graphical glitch? I'm pretty sure it is. I'm using Snow Leopard 10.6.3.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Sound distortion when using hdmi cable

    HP G62 notebook pc(Laptop) windows 7
    I have sound distortion when i connect laptop to pc using HDMI cable, happens after 10 minutes then sound is ok again then 10 minutes later sound distortion again. Sound on laptop is ok. Not HDMI cable because used other laptops and its works fine.

    I'm having this issue as well. Just posting to let people know there is more than one person with this issue. I have a pavilion dv5 laptop

  • How do I get rid of distortion when playing old CDs in iTunes?

    Yesterday I imported a fairly old CD into iTunes and was disappointed to find playback of the CD was so distorted it was impossible to listen to.
    Here are some facts:
    All my other music in iTunes still plays perfectly
    The CD plays perfectly in QuickTime Player on the same machine from the same drive, so it's not a hardware or CD problem
    A newer CD imported today into iTunes imported perfectly
    A bit of research on the web suggests it's to do with the fact that the CD was manufactured a long time ago - the date on the disk itself is 1987.
    I've upgraded to the latest version of iTunes, removed all iTunes plug-ins from my iMac (as instructed by one of the Apple iTunes troubleshooting pages) and I've also switched off Equalizer, Crossfade, Sound Enhancer and Sound Check, but none of these make any difference.
    Does anyone have any other suggestions? Is it something to do with the import settings? If so, can you tell me what they should be set to?
    Many thanks

    Thanks for your reply. Sorry I wasn't specific about this. I get distortion in iTunes when I play straight from this particular CD and when I import it. With QuickTime, I get no distortion when I play straight from the CD, but (I hadn't tried this before but I just gave it a go) I do get distortion when I play the .m4a file created by iTunes. So presumably it's something iTunes is doing when it processes the .aiff file from the CD.
    At the moment the import settings are:
    Import using: AAC Encoder
    Setting: High Quality (128 kbps)
    with the 'Use error correction...' box checked.
    I've never had to touch them before. Is there a better setting to use for importing early CDs?
    Thanks.

  • Runtime error when executing F4 help on 0FISPER or 0FISCYEAR

    Hi experts,
    I got a problem on F4 help.
    When executing F4 help on 0FISPER or 0FISCYEAR using tcode LISTCUBE,
    abap dump occurs. The problem also exists when run query in BEx analyzer.
    My BW version is NW2004s. And SAPKW70012 has been implemented.
    Thanks very much for any advices.
    <b>The error message when run in BEx analyzer:</b>
    System error in program SAPLRRS2 and form EXTRA_FIELDS_SET-01- (see long
    text)
        Message no. BRAIN299
    Diagnosis
        This internal error is an intended termination resulting from a program
        state that is not permitted.
    Procedure
        Analyze the situation and inform SAP.
        If the termination occurred when you executed a query or Web template,
        or during interaction in the planning modeler, and if you can reproduce
        this termination, record a trace (transaction RSTT).
        For more information about recording a trace, see the documentation for
        the trace tool environment as well as SAP Note 899572.
    <b>And the ABAP dump log:</b>
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_RSR_PROPAGATE_X
    Date and Time          2007.04.28 15:08:47
    Short text
    An exception occurred that was not caught.
    What happened?
    The exception 'CX_RSR_PROPAGATE_X' was raised, but it was not caught anywhere
    along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_RS_BASE====================CP' has to be
    terminated.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_PROPAGATE_X', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_SY_NO_HANDLER", which was raised in the program
    "CL_RSMD_RS_BUILD_QUERY========CP",
    specifically in line 1 of the (include) program
    "CL_RSMD_RS_BUILD_QUERY========CM00Y".
    The cause of the exception was:
    An exception with the type CX_RS_SQL_ERROR_SILENT occurred, but was neither
    handled locally, nor declared in a RAISING clause
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_RS_SQL_ERROR_SILENT", which was raised in the program
    "CL_RSDRS_SQL_QUERY============CP",
    specifically in line 288 of the (include) program
    "CL_RSDRS_SQL_QUERY============CM00J".
    The cause of the exception was:
    No text available for this exception
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_SQL_EXCEPTION", which was raised in the program
    "CL_SQL_STATEMENT==============CP",
    specifically in line 32 of the (include) program
    "CL_SQL_STATEMENT==============CM004".
    The cause of the exception was:
    Invalid object name 'T009C'.
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_PROPAGATE_X"
    "CL_RS_BASE====================CP" or "CL_RS_BASE====================CM005"
    "X_PROPAGATE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "sapdev2"
    Network address...... "192.168.1.74"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "SAPDEV2"
    Database type..... "MSSQL"
    Database name..... "BW1"
    Database user ID.. "bw1"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Sep 1 2006 00:19:17"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 75
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 16192
    EM...... 14617568
    Heap.... 0
    Page.... 163840
    MM Used. 4553264
    MM Free. 663776
    User and Transaction
    Client.............. 100
    User................ "HANDLCR"
    Language key........ 1
    Transaction......... "LISTCUBE "
    Program............. "CL_RS_BASE====================CP"
    Screen.............. "SAPMSHLP 0600"
    Screen line......... 7
    Information on where terminated
    Termination occurred in the ABAP program "CL_RS_BASE====================CP" -
    in "X_PROPAGATE".
    The main program was "GP9QWV49ZUMYUSW6JLZIZ85P81N ".
    In the source code you have the termination point in line 12
    of the (Include) program "CL_RS_BASE====================CM005".
    Source Code Extract
    Line
    SourceCde
    1
    METHOD X_PROPAGATE .
    2
    3
    DATA: l_r_x TYPE REF TO cx_rs_no_check.
    4
    5
    TRY.
    6
    l_r_x ?= i_r_root.
    7
    CATCH cx_root.
    8
    CLEAR l_r_x.
    9
    ENDTRY.
    10
    11
    IF l_r_x IS INITIAL.
    >>>>>
    RAISE EXCEPTION TYPE cx_rsr_propagate_x
    13
    EXPORTING
    14
    previous = i_r_root.
    15
    ELSE.
    16
    RAISE EXCEPTION l_r_x.
    17
    ENDIF.
    18
    19
    ENDMETHOD.

    I got reply from SAP. The problem can be solved by running program RSDG_XPRA_IOBJ_TO_NW05. Note 939484 describes this.
    Note 939484 - Input help for tech characteristic and time characteristics
    Summary
    Symptom
    You upgraded to SAP NetWeaver 2004s. An open SQL error occurs when you execute input help for a technical characteristic, a time characteristic or a unit.
    The 'SAPSQL_INVALID_FIELDNAME' short dump in the 'CL_RSDM_READ_MASTER_DATA' class indicates that these characteristics have not been maintained. This error may also occur when you activate InfoProviders, for example.
    The error MAY occur for the following InfoObjects:
    0CALMONTH
    0CALMONTH2
    0CALQUART1
    0CALQUARTER
    0CALWEEK
    0CALYEAR
    0CURRENCY
    0FISCPER
    0FISCPER3
    0FISCVARNT
    0FISCYEAR
    0LOGSYS
    0SOURSYSTEM
    0UNIT
    0WEEKDAY1
    0RATE_TYPE
    0DATE
    0LANGU
    Other terms
    Input help, F4, 0CALMONTH, 0CALMONTH2, 0CALQUART1, 0CALQUARTER, 0CALWEEK, 0CALYEAR, 0CURRENCY, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR, 0LOGSYS, 0SOURSYSTEM, 0UNIT, 0WEEKDAY1, 0RATE_TYPE, 0DATE, 0LANGU, RSDG_XPRA_IOBJ_TO_NW05
    Reason and Prerequisites
    The problem can have the following causes:
    The characteristic does not have any master data, although you did define a master data read class.
    There is no generated master data table for the characteristic (for example, 0CURRENCY) and you have not defined a corresponding master data read class in the meta data.
    Solution
    Technical characteristics and time characteristics were delivered again for SAP NetWeaver 2004s with new properties. The first time you call the data warehousing workbench, the system activates the technical content. If the (time) characteristic already exists in the active version, the system does not copy it from the technical content again.  For SAP NetWeaver 2004s, however, the following conditions must be fulfilled:
    The characteristic has the property "With master data", which ensures that the master data read class functions correctly.
    If the active version of the characteristic does not have any master data, copy the characteristic from the content again. Make any necessary adjustments. Ensure that the "With master data" property is set.
    The characteristic does not have a generated table, rather it has its own table, delivered by SAP (for example, unit 0CURRENCY -> table TCURC). The definition of the characteristic must include a relevant master data read class (for example, unit 0CURRENCY -> class CL_RSMD_RS_0CURRENCY).
    The RSDG_XPRA_IOBJ_TO_NW05 XPRA defines a master data read class automatically. This XPRA is executed when you upgrade. It may, however, occur, that the XPRA is not executed successfully. If this happens, you can execute the XPRA again manually.
    Start Transaction SE38.
    Enter the name RSDG_XPRA_IOBJ_TO_NW05 in the 'Program' field.
    Choose 'Execute' to execute the program.

  • Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

    Gorgeous Hello All,
    Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    In my local machine :
    1.)I have completed my technical writing courtesy Design editor
    2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
    3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
    4.)Viewing Primary Layout : File -> View -> Primary Layout
    Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
    Show Stopper, At my Application Server :
    5.)I copy the entire robohelp project folder from my local machine to my application Server path
    6.)My Application has been developed in ASP .NET, Version 4.0.
    7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the  Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
    8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
    a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
    *** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
    ( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
    Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
    Cheese – Vipin Nambiar

    If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
    http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
    All along your questions have been based on webhelp, why suddenly are we going go CHMs.
    See Snippets on my site for the correct form of help to use in different scenarios.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I can not write in Hebrew And create effects It shows all distorted  When This problem solved?

    I can not write in Hebrew
    And create effects
    It shows all distorted
    When This problem solved?

    roeisarusi wrote:
    When This problem solved?
    Nobody knows.  iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people.  Tell Apple here:
    http://www.apple.com/feedback/keynote.html

Maybe you are looking for