Distribute Adobe Air Runtime via Apple Remote Desktop

I've be researching whether or not it's possible to distribute the Adobe Air framework via Apple Remote Desktop, but I haven't found any solutions. The Adobe Air Admin guide has this to say:
Enterprise deployment
IT administrators can install Adobe AIR and AIR applications silently using standard desktop deployment tools. IT administrators can deploy the following:
•Silently install Adobe AIR using tools such as Microsoft SMS, IBM Tivoli, or any deployment tool that allows silent installations that use a bootstrapper
No mention of Apple Remote Desktop, or any other Apple-related Enterprise deployment methods. Is this possible, or must Mac software vendors bundle the Adobe Air framework with their pkgs (and jump through the necessary licensing hoops) in order for clients to get an Adobe Air app and all it's dependencies (i.e. the Adobe Air framework) distributed to a network of Apple machines.
Thanks!

Thanks for the interest in AIR. You are correct that you would have to wrap everything (runtime and application) up in a .pkg for installation via ARD. Another alternative would be to get the AIR Runtime installer on to the remote system, and then execute it via ssh.
Chris

Similar Messages

Unix security and privacy setting unix command via apple remote desktop

Could someone guide me on the unix command to set System Preferemces Security & Privacy to xx minutes [see screenshot please] via Apple Remote Desktop.
https://dl.dropbox.com/u/5485939/osx_screenshots/sys%20pref%20security%20privacy .png
Thank you,

Pereference tend to be stored for the computer as a whole
/Library/Preferences/
or specifcally for the user
/Users/USERNAME/Library/Preferences/
well when I set required password for XX minutes... I see that
/Users/USERNAME/Library/Preferences/com.apple.screensaver.plist modfication date & time changes to the current time & date... hMMM maybe the setting we want is stored here? Can we test this?
If I check require password and then do the terminal command:
defaults read ~/Library/Preferences/com.apple.screensaver
I see
    askForPassword = 1;
    askForPasswordDelay = 0;
    tokenRemovalAction = 0;
turn it off
run the terminal command;
defaults read ~/Library/Preferences/com.apple.screensaver
I see:
    askForPassword = 0;
    askForPasswordDelay = 0;
    tokenRemovalAction = 0;
so I can turn it on with
defaults write ~/Library/Preferences/com.apple.screensaver askForPassword -bool TRUE
and I can turn it off with
defaults write ~/Library/Preferences/com.apple.screensaver askForPassword -bool FALSE
So if a user is logged into a computer. I could send unix command as current console user.
defaults write ~/Library/Preferences/com.apple.screensaver askForPassword -bool TRUE
BUT what if the user is logged out? or there are more then one user on the computer?
then I could run unix command as user root and send
defaults write /Users/USERNAME/Library/Preferences/com.apple.screensaver askForPassword -bool TRUE
(replace USERNAME with the user's short name.)
but what if I don't know the user name? or names
send unix command as root
ls -al /Users/
get back a list of folders
bob
surely
shares
and then do
send unix command as root
defaults write /Users/bob/Library/Preferences/com.apple.screensaver askForPassword -bool TRUE
defaults write /Users/surely/Library/Preferences/com.apple.screensaver askForPassword -bool TRUE
you could also do some thing like
defaults write ~/Library/Preferences/com.apple.screensaver askForPasswordDelay -integer 5
if you want to change the period of time to lock to 5 seconds
or
defaults write ~/Library/Preferences/com.apple.screensaver askForPasswordDelay -integer 900
(900 seconds / 60 seconds = 15 minutes)

Least CPU Usage- Real Monitor or Apple Remote Desktop

Hello,
What would require the least processing power of a Mac Pro; a 24 inch monitor run via a DVI cable or the same image accessed via Apple Remote Desktop software and displaying the screen on another Mac? Here is the rest of the story...
I am designing a home video surveillance system built around a Mac Pro and SecuritySpy. It will coordinate 12 network cameras (HD quality) and the potential load of the cameras alone will be huge. My goal is to place the Mac Pro in a locked network closet and administer it remotely. I can either go the Apple Remote Desktop route or have the monitor signal sent via an ethernet adapter, but the aim is to tax the CPU the least.
So, what are your thoughts?
“Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
Dr. Z.

Hatter,
Well, the network closet will indeed have it's own dedicated air conditioning unit, so the heat issue should be addressed. However, initial calculations with the possibility of capturing twelve 0.8 Megapixel H.264 video streams at the same time would cripple any current Mac Mini model. Only a 2.93 GHz 12-core Mac Pro could handle this kind of load, and even then, at only 6 frames per second. Obviously I am very anxious to see what Apple will release with it's next line of Mac Pro's (if they don't kill firther production as rumored). I might also be interested in a Mac Mini cluster, but that would cost even more money in the long run.
So, back to my original question. Anyone?
More microchiops than sense,
Dr. Z.

Updating Acrobat using Apple Remote Desktop

I'm pretty sure I already asked this yet I can't find the post so I need to ask again.
I need to update Adobe Acrobat 9 and Adobe Reader 9 remotely - without having to touch every Macintosh the software resides on. I would like to create a cumulative package and install updates using Apple Remote Desktop. I have looked at the Enterprise Deployment software and documentation, yet I don't use Adobe Creative Suite - I only use Adobe Acrobat 9 and Adobe Reader 9.
I have users with varying versions of Adobe Acrobat 9 and Adobe Reader 9, so downloading one version update won't work. What I need is a cumulative updater containing updates from 9.0 through 9.4 for both products that can be deployed via Apple Remote Desktop.
Is this possible and if so, how?
Thanks for any assistance.

We have the same problem. We can mass desploy CS5 with a package made with the Adobe Application Manager Enterprise Edition application. But Acrobat is not supported by AAMEE. Making my own package based on the information on http://www.osxdeployment.info/wiki/CS5_Repackaging_Guide doesn't work for us.
We have more than 300 Macs and it's impossible to do the installation manually.
Adobe should provide a standard pkg for Acrobat Professional 9.3 (part of CS5 DP & WP Suite).
FYI a trial of Acrobat X is nowhere to be found for Mac: https://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro

How do I search threads within a specific support community, i.e.. Apple Remote Desktop?

Very frustrated with new layout of discussion forums...
How do I search key words within threads within a specific support community?
For Example I want to search the phrase 'couldn't collect' within the Apple Remote Desktop community.

Thanks for your response. I'm well aware of the global search field.
My problem with that is if I search the term 'couldn't collect', (in reference to a very specific Error message generated while running a report via Apple Remote Desktop Task Server) I get a slew of useless hits that have either the words 'couldn't' and/or 'collect' or any variation of those words, such as 'collection'.
I'm looking for responses that are very specific to Apple Remote Desktop only. I don't have hours to weed through thousands of responses that have no bearing to that at all.
Searching within specific sub-communities was possible before this new layout. Whatever happened to the booelean searches and searching by phrases and the 'advanced' searches? Do they still exist?

Apple Remote Desktop, 2010 Mac Pro, and six displays

Under 10.8, we were able to operate a 2010 Mac Pro (MacPro5,1) with 2 x HD5770 video cards and 6 x LED Cinema Displays (the mini DisplayPort models, two of them via IUSB-powered Atlona DVI Dual-Link-to-mDP adapters, via Apple Remote Desktop.
Under 10.9 (currently 10.9.2), all the displays still work, but ARD is having significant heartburn: if it is able to connect with the ARD agent on the display syste, the display arrangement is incorrect, and no amount of swapping mDP cables, moving the displays around in the Displays System Preference pane, and/or rebooting appears to help. Oh, and the most recent end state, when I finally managed to get the menu bar on one of the displays on the top (physical) row (we have them arranged 2 x 3, in order to display 4096 x 4096 pixel movies of spacecraft data), flummoxed ARD completely --- it simply refused to connect with the display machine at all. (I can ssh into the display system and use a cabled keyboard and mouse as well, but that's not a long-term solution: we have to be able to operate remotely, as we did under 10.8.) Oddly, ARD works OK, if not perfectly every time, with the target system when it's only connected to four or fewer displays (regardless of whether they're connected to mDP ports or via the Atlona devices). The host ARD system is another MacPro5,1 with 24 Gbyte of RAM; the target has 96 Gbyte.
Reading the release notes for ARD 3.7.2, it sounded as though all our issues would be addressed, but alas, it is not so: we're still stuck with ARD trying to but unable to open a "Control" connection to the display system.
Does anyone have any experience, positive or negative, with a similar setup under 10.9 and ARD 3.7.2?
Is there any way to clear all the settings in ARD? I can't find any .plist files with client system-by-system info in them, and I suspect they are (appropriately) encrypted because they can contain passwords, or at least store the hashed passwords in encrypted fields.
Thanks in advance for any clues for the clueless.

Mac Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
Mac Pro (Mid 2012)
Jun 2012
10.7.3
10.8
11D2001, 12A269
Mac Pro (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3
10F2521, 10F2554, 11A511a, 11C74, 11D2001
Mac Pro with Mac OS X Server (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3 (Server)
10F2522, 11A511a, 11C74, 11D2001 (Server)
Mac Pro (Early 2009)
Mar 2009
10.5.6
10.6
9G3553, 10A432
Mac Pro (Early 2008)
Jan 2008
10.5.1
10.5.2, 10.5.4
9B2117, 9C2031, 9E25
Mac Pro
Aug 2006
10.4.7
10.4.8, 10.4.9, 10.4.10, 10.5
8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
I expect your Hardware is essentially unchanged since the 2010 model, and should run the custom 10.6.4 they provided, or 10.6.5.
The "Full Retail" 10.6.3 is only 10D575, so it will not suffice.

How is the Adobe AIR runtime distributed?

The Adobe AIR runtime can be distributed in a number of ways, including but not limited to:
Desktop
Downloaded and installed from the Adobe website.
Installed along with an AIR application as part of a seamless web install.
Distributed by third parties as part of a licensed distribution (typically along with an AIR application.)
Android
Downloaded from the Android Market.
Preinstalled on the device.
Distributed by third parties as part of a licensed distribution.
BlackBerry Tablet OS
The AIR runtime is preinstalled and integrated into the BlackBerry Tablet OS.

Hi Dirk.
Peter Grainge has an article on Air's use on his
site.

I have flash professional cc and I need air for desktop application with .exe or .air that should contain all swf's and captive air runtime in one Installer only . I don't want to install separate adobe air runtime .

I need Air for desktop application either in .exe or in .air with embedded captive runtime just like .apk . I don't want to install adobe air separate . everything should come in installer
I have adobe flash professional cc development tool , let me know whether I have to go with other development tool???
your reply will increase my confidential level
please anyone can help me to solve this problem
Thanks&regards
Niranjan

Adobe Flash Professional CC manual
1) Create new project
2) Configure your Project properties
3) Embed runtime, so you users can use Adobe AIR without pre-installed Adobe AIR runtime
4) After publishing you will receive %APP_NAME%.app folder that contain your project files

How can I remotely access my computer from a different location on Apple Remote Desktop?

I downloaded Apple Remote Desktop and am trying to access our computer at our church that is in the auditorium and work on slides for ProPresenter from my office which is on a different network. The Mac Pro, which is in the auditorium, is connected to a Netgear wireless router. I would also want to be able to have access to observe and control the screen on the Mac Pro whether I am in my office or at my house. I have tried everything from going to portforward.com, followed those instructions, did port forwarding, used ipchicken.com to get my external IP and made sure that the Mac Pro had a static internal IP address and made sure the computer had access for remote management. Any help to resolve this issue would be greatly appreciated! Works fine when it is on the same wireless network, but I need access being on a different wireless network. Thanks!

Hi austinmac14,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, gotohttp://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

How can I deploy my AAMEE without Apple Remote Desktop?

Hi everyone,
I created a build for Adobe CS6 Production Premium for Mac with the serial number embedded, along with the current updates. All is well with that; however, this is the issue that I am having:
I have tried to test the build on a local machine (the computer I created the build on) and was able to install the package with no issues; however, when I try to deploy build onto a networked machine, it doesn't work.
I have read through the AAMEE Reference Guide and have read (if I am not mistaken) that for CS6, you can only deploy an AAMEE build through Apple Remote Desktop onto multiple machines. I have also read that you would need Apple Remote Desktop on all of the machines you want the build to deploy on.
If that is case, if I have read the guide correctly, what is the point of deploying the build through a network if you have to still install ARD onto all the machines you want the software one? How can you get around this to be able to deploy your AAMEE successfully onto a network on machines?
When I tried it last night on one network Mac with ARD, I received the error message for "Validating packages...". I'm not sure what that means because the build works perfectly on local machine.
Any ideas would help as far as deploying the build on a network without using ARD, or really, just a simpler alternative that works?
PLEASE HELP.
Thanks.

Hi,
You can deploy package using any of these tools - ARD, SSH, Casper suite, Absolute manage, Land desk..and may be more but we have only tried these.
We have mentioned ARD as an example, but other standard tools can be very well used for deploying package. and there is no need to have ARD installed on all machines where you want to deploy the package, but only on admin machine.
can you please let me know - which client OS are you trying to deploy the package and whether the client machine is logged or logged in? please forward install.log if you are facing the error.
thanks,
Rahul | [email protected]

Apple Remote Desktop and controlling over VPN

Hi All,
I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
Thanks

Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

Can I use Apple Remote desktop to connect over the internet?

I would like to use Apple Remote Desktop to connect back to my MacPro desktop at home while I am on my Macbook Air at work. Will I need a static IP from my service provider to do it.

Hi
It's not absolutely necessary but it would be more useful if you did have one. Most ISPs will require you to have a business class broadband service at your home rather than a residential one. These cost more (a lot more in some cases) than a residential service. Call your home location's ISP and discuss it with them.
If the cost is too much then you could go for a DynDNS account which is free. The details of this account would be configured in the whatever you're using as a firewall at your home's location. This assumes the firewall has the facility to add such an account. Thereafter it's just a question of configuring the port fowarding feature of that firewall.
A potentially 'big' problem though is whether or not your workplace will allow that kind of traffic out of their network. This would be something you'd need to discuss with them first.
HTH?
Tony

How to read serial number of adobe air runtime / flash plugin

Hi
Question:
Is there a way of extracting a unique serial number (or assembly number) from the air runtime and the flash player.
Background:
I asked this question on Experts Exchange and the consensus was that it's not possible. However, I thought I would try here before I gave up.
I am using flash remoting and I want to pair a user's subscription with a specific flash player or adobe air runtime. The flash application would interrogate the flash player and send it back to a database using remoting. If the serial number was correct then the user would get access. If not they would be rejected. The same would happen with an Air application but the serial number would be pushed instead of pulled.
Mplord of EE introduced me to the Capabilities class (Flash) and the NativeApplication.nativeApplication class and method (Air). However, it's not really what I was looking for. In c# and vb.NET it's possible to extract the windows serial number from the OS and I'm looking for a similar function in as3.
If this was possible it would be a fantastic way to protect your content and it would be really easy for Adobe to build this feature in.
Thanks in advance for any help.
Kind Regards

Sorry, but you are at the wrong forum; this one is only for discussions on the forums themselves. The Air forums are here:
http://forums.adobe.com/community/air

How to set Updates with 11.3 when using Apple Remote Desktop for installation?

So for all pre-11.3 versions of Flash Player on OSX, I have just pulled out the "Adobe Flash Player.pkg" installer package from the installer .dmg and used Apple Remote Desktop to deploy Flash to the Macs I manage.
However, when doing that with Flash 11.3, this leaves the "Updates" setting in the Flash Player System Preference set to "Notify me to install updates".
I'd like to push something that would set this to "Allow Adobe to install updates".
Is there a way to modify the .pkg installer to have the System Preference set to that value (or push/copy some other .plist file to the clients to have that setting enabled?)
Thanks!

I poked around a bit and the file seems to be:
/Library/Application Support/Macromedia/mms.cfg
I'd like to get some confirmation from Adobe that this is the correct file to push, though (it seems like it as it only contains this):
AutoUpdateDisable=0
SilentAutoUpdateEnable=1

Apple Remote Desktop issues in Mavericks

After upgrading to Mavericks from Snow Leopard on my MacBook Air, Apple Remote Desktop skewed all my lists. I can no longer control any of my client machines (even after I updated to clients to 3.7.1) and the overall performance is choppy at best. I am able to control client machines that have a static IP i.e. Servers etc., but ARD does not see any DHCP clients when scanning ethernet or wireless and will not let me control or view any existing clients that I maintained prior to installing Mavericks. Anybody else experiencing problems with ARD in Mavericks?

You might try to turn off the firewall on the client. Yes, this appears to be a bug. If you can connect to the client thru SSH you can use this:
sudo /usr/libexec/ApplicationFirewall/socketfilterfw --getglobalstate
That should return:
Firewall is enabled. (State = 1)
Then you can run:
sudo /usr/libexec/ApplicationFirewall/socketfilterfw --setglobalstate off
That should return:
Firewall is disabled. (State = 0)

Distribute Adobe Air Runtime via Apple Remote Desktop

Similar Messages

Maybe you are looking for