Distribute​d System Manager trend y-axis scale

I've been trying to monitor some boolean shared variables in the Distributed System Manager.  I've been looking at the trend, but I can't find a way to change the y-axis scale from 0-100.  With that scale, I can't see if a value switches from 0 to 1. Is there a way to change the scale?
Thanks!
Emily
LV2012

Nevermind, I see that it auto-scales now, the one that I was looking at, I was expecting to change, but it wasn't...

Similar Messages

  • CRIO Doesn't Show Up In The Distributed Systems Manager

    All,
     Any idea why my cRIO wouldn't show up in the distributed systems manager? I'm running Real Time 3.2.1 and I've already deployed my shared variables. I can see the cRIO through MAX and with my project just fine.
    - Ken 

    Hi Ken,
    I have a couple of questions/things we can try:
    1.  How are you connected to the cRIO? (Crossover, switch, router with DHCP)
    2.  Are you able to manually add the cRIO by IP Address to My Systems?  (Right-click My systems, select Add Systems..., type in the IP Address and select OK.)
    3.  Are the shared variables hosted on the cRIO?  If not, do you see the Shared Variables in the Distributed System Manager?
    4.  Try enabling CPU Load Monitoring through the cRIO Target Properties in the LabVIEW Project (Right-click cRIO, select Properties, go to Miscellaneous and check Enable CPU Load Monitoring, deploy the settings and reboot the cRIO).
    5.  If you already had Distributed System Manager, does pressing F5 to refresh help? 
    Finally, I would like to know what version of Distributed System Manager/LabVIEW you are using.

  • Distributed System Manager SysMan ACL.acl

    I've managed to lock myself out of the Distributed System Manager. 
    The help file http://zone.ni.com/reference/en-XX/help/372572A-01/sysman/ni_acl_db/ says to reset security settings remove the SysMan ACL.acl file from the default LabVIEW Data directory.  I cant find it
    I've completed a search on my hard drive and found no file with an .acl extension
     I was logging in and out trying to get the Shared Variable Engine operating correctly and for some reason I decided it would be a good idea to add a new host.  A message along the lines of "Changing this setting will no longer allow (Nobody) to log in"  It was a Friday afternoon and I presumed that as it was trying to log in with the User (Nobody), this was why my Shared Variable Engine would not connect to my OPC Server
    Now the host name I changed it to does not work.  It says the user is invalid.
    Any ideas how to reset the host settings so I can at least get in?
    Alan

    Hi Tony
    Thanks for your help
    See attached I went to Actions>ConfigureSecurity>then selected add New User/Host
    Then checked configure new host and typed in the username of the PC.
    Not the cleverest thing Ive done recently
    Alan
    Attachments:
    Doc6.doc ‏44 KB

  • RT Target Resources and Distributed System Manager

    Hello all,
    Does anyone know of some potential reasons why an RT target might not publish its CPU and memory usage?  This particular target is a cFP-2200 running a complete installation of FieldPoint 6.0.2 (RT 8.6) including System State Publisher.  For some reason I can't view the memory usage on this target and I haven't been able to figure it out.
    Thanks in advance,
    Jim

    Hello Hillman,
    Thanks for your reply!  I sort of
    figured that this one would go by the wayside and not be answered. 
    Actually, I'm not using RTSM; I'm using the Distributed System Manager
    - It's a relatively new tool that ships with LabVIEW RT 8.6.  In my
    humble opinion, I find it to be much superior to the RT System Manager
    in its own way.  The only downside, really, is that you can't log with
    it natively, but there are ways around that.
    You've
    got some great suggestions.  I definitely was using the correct IP, I
    could target it with LabVIEW because I loaded my application on there,
    and I didn't get any boot errors when I connected.  You're absolutely
    right, too, that the CPU is always maxed out at 100%.
    I
    guess I was perplexed because, one moment I could see the resources in
    DSM (is that acronym valid yet?), and after I reloaded the software
    from scratch, I could see lots of variables on the target, but for some
    reason the system resources weren't showing up.  After no one jumped on
    the question, I went back to tweaking various settings and realized
    that I hadn't rebooted after enabling VI Server.  In fact, I didn't
    think that VI Server would be the issue and hadn't really thought of
    checking there.  My reasoning followed that, if all of the other
    variables showed up, surely it wouldn't be VI Server, but that fixed it.
    I definitely appreciate your getting back to me, though.
    Cheers,
     Jim

  • Shared variables missing in distributed system manager

    I have multiple shared variables in a library (.lvlib).  These are all network-published shared variables.  I can see the library in Distributed System Manager but not the variables in the library.  When I look at the properties page in Share Variables Properties Dialog, aliasing is not enabled because the library is hosted on the same machine as the application. 
    I tried to run the Shared Variable Monitor application but was given a Runtime Error for TagMonitor.exe; "This application requested Runtime termination in an unusual way.  Contact application support team."
    I also tried undeploying and deploying the library as suggesting by KB 56PCQ3RR.
    Why does Distributed System Manager see the shared variable library but not the shared variables in it?

    Hello faustina,
    Has there been any software or hardware changes on the application since the error occurred? Also I would recommend to format and reinstall the software on your Real-Time target, after this you can follow Matt’s recommendation to test this behavior with a new project and single shared variable.
    Regards
    Jose R

  • How to uninstall NI Distributed System Manager 2012?

    Hi,
    My PC started off with LabVIEW 2012 and related modules. After I installed LabVIEW 2013, I uninstalled all the 2012 software that I could find (that aren't dependencies of any 2013 software) through the "National Instruments Software" dialog. However, Distributed System Manager 2012 persists in my system, alongside DSM 2013. How can I remove DSM 2012?
    Thanks!

    Hi Ranjeet,
    I don't remember seeing the installer upgrading my DSM, but I might have missed it.
    After I installed LabVIEW 2013 and other newer software, I restarted my computer because the installer asked me to. After that, I used the National Instruments Software dialog to uninstall LabVIEW 2012 and other older software. Then, I restarted my computer again:
    There were no error messages, but there are now two versions of DSM in my Start menu (you can see all the default icons placed by NI installers):
    All the DSM files are still in my computer:
    I can launch both versions. Their "About" boxes show that they are two different versions:
    How do I uninstall DSM 2012?
    Thanks!

  • OPC server trouble seeing tags in NI Distributed System Manager

    I have created my own OPC server for simulation purposes.  If I create an I/O server and select my OPC server I can then "create bound variable" in which I can browse my OPC tags which are all in there.  I use another program which makes use of property nodes to acquire a list of paths to these tags.  The list is empty.  I noticed that when I run the "NI Distributed System Manager" I can see the I/O Server but the sub tree doesn't show my tags.  If I got them to show up in "NI DSM" then I could get a list of tag paths.  Does anyone know why my tags would show up in the "created bound variable" window and not the "NI DSM" window?  I have tried deploying the library that the I/O server is in but this doesn't work.
    Thanks
    Matt

    Thanks for the reply Charris,
    I have two OPC servers.  One is the simulator and one that I connect to at a remote location which required some OPC client software (some service in windows registry which I am not familiar with). All I know is that I can browse all tags on the remote OPC server by first creating an I/O server (yes I use OPC client) and selecting "create bound variables".  Before I bind any shared variables to OPC tags I can go into DSM and see all the tags that are not yet shared variables.
    When I try doing this with the simulator, I first create the I/O server before I can browse all the tags in "create bound variables".  But this time when I go to the DSM, they are not listed under the I/O server.  This is just an observation.
    My real problem is that I use this piece of code found on the NI website to get a list of tags (URLs).  This code works with the remote OPC server but not with the simulator.
    I don't really understand the code.  All I know is that if I input the name of the library and the name of the I/O server as well as the path to the PC, it brings back a list of URLs pointing to tags.  Maybe there is something in this VI you can help with.
    Thanks
    Matt
    Attachments:
    Get Tag List.vi ‏38 KB

  • CompactRIO distributed system manager.

    We are using CompactRIO and would like to access each module and monitor the I/O values using distributed system manager.
    When using Scan engine mode we were able to see the modules. Now are we are using FPGA mode and cannot see the modules.
    Is there a way to use distributed system manager to access the modules using FPGA mode ?

    blindbrooks,
    Unfortunately, this is not possible, due to the way Scan Mode and FPGA Mode work.  Scan Mode is a precompiled bitfile that accesses each channel of a module in the chassis, and then publishes the values to the RT target, where they are hosted in a special Shared Variable called an I/O Variable.  This is why you are able to automatically see each of the channels in Distributed System Manager (DSM).  However, in FPGA mode, this is not the case, as you are creating your own bitfiles, and not explicitly setting the values into Shared Variables.
    If you do want to see values from your modules in DSM, you can manually publish your data to a network-published Shared Variable, which would then appear in DSM.  This article goes a bit more in depth into shared variables:
    http://zone.ni.com/devzone/cda/tut/p/id/4679
    Drew T.
    NIC AE Specialist

  • AXI DB2 distributed sap systems and rsh

    Hello,
    we are running sap with aix 5.3 and db2 v9. our application server, central instance and database are running on different servers. Until now we are using rsh to start the distibuted systems. security colleagues asked us to change to ssh. we have seen, that it is possible to start db2 with ssh. but it is also possible in a distributed sap system to set rlogin=false and doesn't use rsh anymore?
    thanks
    alexander

    Not sure what you are asking about - indeed, to use ssh for DB2 is of importance for DPF systems (i.e. BW-based SAP systems in multi-partition environments).
    If you are asking how to enable ssh for starting SAP systems, then I guess the approach is to replace 'rlogin' by 'ssh' in your scripts. Of course, you need to ensure before that ssh is working as intended. E.g. if you expect the process to work without providing passwords, then you need to ensure that ssh can login without a password. You can find related information in the net e.g. searching with keywords
        ssh automatic login
    If all this does not help, or address your issue, please provide more exact information, e.g. the scripts you use.

  • System management software for LV apps on cRIO and Windows

    Hello All,
    Were I work there is a LabVIEW based project that is a distributed system. This system has a main application that can run on Linux, Windows, or cRIO targets. The main application loads "plugins" depending on what platform it is on to do platform specific things. For example, one plugin uses a DLL interface to communicate with OPC servers. Another plugin measures voltages and currents on cards in the cRIO chassis.
    The system occasionally needs updates and the sites where it runs are remote. The current solution is to send a technician who installs a full upgrade. We want to move to a rolling upgrade that is automated.
    We can certainly roll our own solution, but before we do that we want to investigate existing solutions.
    I believe such systems are under the buzzwords System Management Software and WSUS the windows update solution is one of these.
    Is there a System Management Software package that would deploy to cRIOs and Windows machines? (We have the Linux one solved already, although we might redo it if there is something really slick out there.)
    Thanks!

    Hi,
    For cRIO's you might want to have a look at the Real-Time Target System Replication.
    Christian

  • AnyChart DateTime axis scale

    I'm trying to display the x-axis for a chart with a "fixed" scale of months within a given period, using a Line Series chart.
    My query is like
    select null link,
    to_char(sample_date, 'DD/MM/YYYY') label,
    water_temp value
    from my_table
    I've followed the documentation here: http://www.anychart.com/products/anychart/docs/users-guide/DateTime-Axes.html
    Sadly the markup in this guide vs the source displayed is different..ie, when you go to open the first bar chart there, the xml that is showed on the pop-up doesn't match the code in the main section, and it's missing the min/max values.
    I've set up the <locale> tag as follows:
    <locale>
               <date_time_format>
                 <format><![CDATA[%MM/%dd/%yyyy]]></format>
               </date_time_format>
          </locale>I've modified the x-axis <scale> tag
    <x_axis>
                <scale type="DateTime"  major_interval_unit="Month" minimum="01/01/1999" maximum="06/01/2012"/>
    </x_axis>But I can't seem to get the chart to pick up the min's and max. From what I can get from the docs, I should be able to set the scale up on the x-axis somewhat independently from the actual data points themselves.
    Is this supported and has anyone done this successfully?
    Thanks in advance.
    Edited by: jholoman on May 18, 2011 10:56 AM

    Hi Folks
    I'd like to ask if anyone has managed to get an AnyChart gauge working with date & time based axes and data values.
    My development colleagues have scoured the documentation and tried several times to get this to work without any success.
    The AnyChart documentation suggest that date & time based axes and data values can be used with certain chart types but is then vague about their use with the Gauge chart type.
    Any tips on how to make this work would be very welcome - and if it's simply not possible, we'd like to stop chasing this particular rainbow ;-)
    Many thanks
    Andy
    Edited by: Andy Smith on Jun 14, 2011 5:14 PM

  • Distribute​d Dystem Manager: Single TC channel in 16 channel module: "Unknown Bad Quality"

    LV2013
    cRIO-9074
    NI 9213 TC Module
    A single channel (TC7) reports no data....I swapped the TC Module - no change.
    Scan Engine owned module.
    Anyone ever see this?

    Hi S1ack,
    I did some looking into this issue.  It appears that at least there is a difference between what DAQmx and NI-RIO will produce as a value when there is an open thermocouple measurement.  With DAQmx, the value will approach infinity as expected, but with NI-RIO 13.0, you will encounter a reading of zero.  This reading is also accompanied by an error in LabVIEW Real-Time, -65582 or -1950678943 depending on what mode you are accessing the value by.  While this is a departure from the expected behavior of an open thermocouple reading, the generated error values should provide enough information to correctly detect when a thermocouple has failed.  While this may not be intuitive when compared to other thermocouple measurement techniques in industry, this is expected behavior for the NI-9213 through Distributed System Manager.  Hopefully that helps!  Please let me know if you have any further questions.
    | Zach J. | Applications Engineer | National Instruments |

  • ERROR MESSAGE sap system manager:work process restarted, session terminated

    Hi,
    i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
    SAP Version :ideas 4.7
    Database :Oracle
    OS : windows 2003
    Module user is working on MM
    user working on it is a Super user with all the permissions
    SAP is configure to run under the  European date and decimal format.
    I have never done any database administration on it, it is a new install and has been rarely used.
    User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
    Below are the details of the error message from ST22 :
    name of the runtime error : system_core_dumped
    below are the details of the error message and its resoltion as suggested by sap help :
    ========
    Runtime Errors         SYSTEM_CORE_DUMPED           
           Occurred on     01.02.2008 at 07:52:19
    Process terminated by signal " ".                                             
    What happened?
    The current ABAP program had to be terminated because the                     
    ABAP processor detected an internal system error.                             
    The current ABAP program "SAPLCLSC" had to be terminated because the ABAP     
    processor discovered an invalid system state.                                 
    What can you do?
                                                                                    Make a note of the actions and input which caused the error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                                               
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer      
    termination messages, especially those beyond their normal deletion           
    date.                                                                               
    Error analysis
    An SAP System process was terminated by an operating system signal.           
                                                                                    Possible reasons for this are:                                                
    1. Internal SAP System error.                                                 
    2. Process was terminated externally (by the system administrator).           
               Last error logged in SAP kernel                                    
                                                                                    Component............ "Taskhandler"                                           
    Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"      
    Version.............. 1                                                       
    Error code........... 11                                                      
    Error text........... "ThSigHandler: signal"                                  
    Description.......... " "                                                     
    System call.......... " "                                                     
    Module............... "thxxhead.c"                                            
    Line................. 9555                                                                               
    How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often             
    contains a file called 'core'.                                                                               
    Save this file under another name.                                                                               
    If you cannot solve the problem yourself, please send the                     
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                  
       To obtain this, select the "Print" function on the current screen.         
                                                                                    2. A suitable hardcopy prinout of the system log.                             
       To obtain this, call the system log with Transaction SM21                  
       and select the "Print" function to print out the relevant                  
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,            
       supply the source code.                                                    
       To do this, you can either use the "PRINT" command in the editor or        
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred            
       or which actions and input led to the error.                                                                               
    System environment
    SAP Release.............. " "                                                                               
    Application server....... " "                                                 
    Network address.......... " "                                                 
    Operating system......... " "                                                 
    Release.................. " "                                                 
    Hardware type............ " "                                                 
    Character length......... " " Bits                                            
    Pointer length........... " " Bits                                            
    Work process number...... " "                                                 
    Short dump setting....... " "                                                                               
    Database server.......... " "                                                 
    Database type............ " "                                                 
    Database name............ " "                                                 
    Database owner........... " "                                                                               
    Character set............ " "                                                                               
    SAP kernel............... " "                                                 
    Created on............... " "                                                 
    Created in............... " "                                                 
    Database version......... " "                                                                               
    Patch level.............. " "                                                 
    Patch text............... " "                                                                               
    Supported environment....                                                     
    Database................. " "                                                 
    SAP database version..... " "                                                 
    Operating system......... " "                                                 
    User, transaction...
    Client.............. " "                                                      
    User................ " "                                                      
    Language key........ " "                                                      
    Transaction......... "ME41 "                                                  
    Program............. "SAPLCLSC"                                               
    Screen.............. "SAPMM06E 0320"                                          
    Screen line......... 71                                                       
    Information on where termination occurred
    The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".  
    The main program was "SAPMM06E ".                                                                               
    The termination occurred in line 131 of the source code of the (Include)      
    program "LCLSCF2G"                                                           
    of the source code of program "LCLSCF2G" (when calling the editor 1310).      
    =============
    i even tried increasing the dialog processes but with no use.The same error occurs.
    I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
    thanks
    mudessir.

    Hi
       follow correction method suggested in this dump,
    " The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.  Save this file under another name."
    have you done this?
    with regards,
    raj.
    <i>pls, award points</i>

  • SLD - Logical System Management

    Hi,
    We are implementing XI and we have the problem with SLD logical system management. The problem is that we use the same Logical system name (Ex. PRDclnt350) for all the systems to avoid running lengthy BDLS process when we hook our R3 systems to their respective BW systems.
    Can you please suggest how we take care of this in XI -SLD landscape as it requires unique logical system names for each Business System when maintaining in SLD.
    Can we have multiple SLDs and will it take care of the issue. If so can we take one of them as the master SLD and the rest as slave SLDs. What would be the best practices for synchronizing them. Any help in this regard is greatly appreciated.
    Thanks and regards..
    Haritha

    Hi All,
    We opened an OSS note with SAP regarding this. Please see the question we asked and the response we got from them regarding the SLD maintenance:
    Hi,
    We are on BW 3.5 and SAP ERP 5.0. We are implementing XI now. So we
    need to configure SLD and register our Business systems. The problem is
    we have the concept of using the same logical system for all our SAP
    systems, say WRPCLNT750, when we are hooking our systems to their
    respective BW systems. And in SLD, we have problem becuase of this, as
    it recommends to have unique logical system name for each Business
    System being registered.
    We want to mention some points in here about our landscape and some of
    the recommendations we got from SAP regarding this. Ours is a very big
    warehouse system and in order to avoid the lengthy "BDLS" runs, SAP
    recommended using the same Logical System name for all the SAP systems.
    Hence we are using the same logical system name for our systems.
    So now coming to our problem, can you please tell us what would be the
    best practice that needs to be followed now for SLD Business System
    registration. How can we overcome the hurdle of NOT having a unique
    logical system name for our systems in central System Landscape
    Directory.
    Please let us know the solution as early as possible.
    Thanks and regards..
    Haritha.
    The Response:
    Hello Haritha
    I have found some pass cases with the same question that you have,
    however, the replies from developer are as below.
    Logical systems cannot be duplicated within the SLD, that means one
    Business System per Logical System name, both need to be unique, the SLDis working a designed here.
    I would suggest you rename one of the copies of the productive system
    to solve this.
    My apology that I couldn't provide you a better answer for this.
    Thanks & Best Regards
    Andy Lam
    Active Global Support - SolMan & Technology
    Kindly, please let me know your suggestions.
    Thanks and regards..
    Haritha.

  • Where I can find and use "Java Desktop System Management Tools "

    With Solaris 10, you not only get the Java Desktop System desktop environment, but also the Java Desktop System Management Tools and a selection of free and trial Development Tools, which are available for download only.
    I found only an information about JDS release 2
    but today it's release 3 already and it's said it already integrated in JDS
    and above sentence it state that it already come with solaris 10?
    where i can find that , where i can use it
    http://docs.sun.com/app/docs/doc/817-7575/6mmsrpduj?a=view
    this page said how to install but ...where I can find CD/
    regards please help

    Good question. It appears to have been installed with Solaris 11/06, as I have all of the packages listed here:
    http://docs.sun.com/app/docs/doc/817-7575/6mmsrpdus?a=view
    However, it does not appear in the Java Web Console. I tried adding it using the wcadmin command, but haven't managed to get it to run as per the docs. The documentation assumes that it is already installed and visible in the Java Web Console...
    According to this documentation:
    http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l6?a=view#gdjpi
    An application for the Java Web Console should have a WEB-INF directory and an app.xml file. The apoc packages come with neither, so something is missing.

Maybe you are looking for