Distributed Database with IPV6

Distributed database was not that familiar few years before...will IPv6 enhance the distributed database systems ? DDBMS has wide range of best features & notable drawbacks to..however today's business need of distributed database. contribution of DDBMS in Cloud computing.

user4422434 wrote:
Distributed database was not that familiar few years before...will IPv6 enhance the distributed database systems ? No. Distributed databases have been common in the last century too.. running across IPv4 and Novel IPX networks.
Do not confuse the communication transport layer with the ability of the database to support distributed integration. Even NetBEUI can be used (assuming that protocol routing is not needed). Distributed database is not about protocol dependency.

Similar Messages

Query distributed database with different character sets.

Hello experts, this is my situation:
I have two databases A and B, the same version 11.1.0.7, the same OS Suse Linux Enterprise 10 but with different character sets, A has WE8MSWIN1252 while B has AL32UTF8. The database B is my XML DB repository so there I have some XML type tables. I need to query this tables from the database A using a dblink and in fact I have done that but the XML content is trasformed due to the different character sets between the databases. Some time there are data loss and some time there are data missmatch.
Is there any way to query the tables stored in the database B without problems? I do not know if the following is correct: Maybe I can set the character set for the session in the database A during the time it query the database B. That is, change the character set in fly at session level.
Do you have any special suggestion?
I hope you can help me, thank you in advance.

The Globalization Support Guide for 11.1.0.7 has a chapter on character set migration that should be helpful. AL32UTF8 is a superset of WE8MSWIN1252 but it is not a strict superset. That is, it doesn't meet the second prong of the test in the documentation
The new character set is a strict superset of the current character set if:
Each and every character in the current character set is available in the new character set.
Each and every character in the current character set has the same code point value in the new character set. For example, many character sets are strict supersets of US7ASCII.Exporting the data from the A, changing the character set (or creating a new database with the AL32UTF8 character set), and then importing the data may be the easiest approach in your case.
Justin
Edited by: Justin Cave on Jan 13, 2011 12:08 PM

Distributed Database + DB13 + SAPXPG + Standalone Gateway

Hi All,
I knew this question has been asked and answered but i still couldn't find the concrete solution. Any advise is mostly welcome.
I've installed Distributed Database on Solaris and CI on Solaris as well. Due to security reason and policies, our customer stop us from using RSH.
I've installed standalone gateway in Distributed Database with System Name EGW, system number 20. My SAP and DB name is AEP.
gwrd is started using egwadm. TCP_IP connection SAPXPG_DBDEST_DBHOSTNAME works fine, however when i kick off checkDB in DB13, i got the below error:
"> Function: BtcXpgPanicCan't exec external program (No such file or directory)"
Have i miss out something? Do i need to add any ENV to egwadm or edit the SAPXPG program?
fyi, br* and SAPXPG authorization are all set correctly in /sapmnt/AEP/exe. Env for AEPadm in CI is identical to AEPadm in DB server.
Please advise.
Thanks,
Nicholas Chang.

Hi All,
Since there's no SAP Note explaining how to setup standalone gateway in UNIX env and incorporate for brtools to work in distribtuted system. I'll summarize the resolution here:
1) Install GW in database server
2) update the GW start profile with below value:
BGW = Gateway's SID.
SETENV_00 = LD_LIBRARY_PATH=$(DIR_LIBRARY):%(LD_LIBRARY_PATH)
SETENV_01 = SHLIB_PATH=$(DIR_LIBRARY):%(SHLIB_PATH)
SETENV_02 = LIBPATH=$(DIR_LIBRARY):%(LIBPATH)
SETENV_03 = ORACLE_SID=SID
SETENV_04 = SAPDATA_HOME=/oracle/
SIDSETENV_05 = PATH=$PATH:/home/BGWadm:/usr/sap/SID/SYS/exe/run:/usr/bin:.:/usr/ccs/bin:/usr/ucb:/oracle/SID/112_64/bin
3) update BGWadm env profile - sapenv_HOSTNAME.csh
setenv SAPDATA_HOME /oracle/SID
setenv ORACLE_SID SID
setenv PATH /home/bgw:/usr/sap/BGW/SYS/exe/run:/usr/bin:.:/usr/ccs/bin:/usr/ucb:/oracle/SID112_64/bin
setenv ORACLE_HOME /oracle/SID/112_64
setenv USER bgwadm
setenv dbs_ora_schema SAPSR3
setenv NLS_LANG AMERICAN_AMERICA.UTF8
setenv DB_SID SID
setenv dbs_ora_tnsname SID
setenv dbms_type ORA
setenv LD_LIBRARY_PATH /usr/sap/SID/SYS/exe/run:/oracle/SID/112_64/lib
setenv DIR_LIBRARY /usr/sap/SID/SYS/exe/run
4) copy br* to gateway's /sapmnt/SID/exe/ and ensure 4775 is granted
5)Create the special OPS$ setting to allow BGWADM to log into the database. use the script below . Log in as oraSID to run this on DB host via SQLPLUS (connect /as sysdba)
CREATE USER "OPS$BGWADM" DEFAULT TABLESPACE PSAPSR3USR
TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
grant unlimited tablespace to "OPS$EGWADM" with admin option;
grant connect to "OPS$BGWADM" with admin option;
grant resource to "OPS$BGWADM" with admin option;
grant connect to "OPS$BGWADM" with admin option;
grant resource to "OPS$BGWADM" with admin option;
grant sapdba to "OPS$BGWADM" with admin option;
CREATE TABLE "OPS$BGWADM".SAPUSER
(USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$BGWADM".SAPUSER VALUES ('SAPSR3',
'your_password');
6) stop gateway and kill gateway sapstartsrv
7) start gateway
8) in CI - SM59 - TCP_IP -> SAPXPG_HOSTNAME_DB -> ensure gateway host is points to DB server and sapgw is the system number for DB Gateway
9) test checkDB in db13.
Cheers,
Thanks,
nicholas chang.

Fatal error distributing forms with Adobe Acrobat 9 Pro

Fatal error distributing forms with Adobe Acrobat 9 Pro.
I click
"Adobe Acrobat Pro/Formularer/Distribuer formularer/"
("Adobe Acrobat Pro/Forms/Distribute forms/")
and chose a form for distribution and in the picture "Distribute Form" chose
"Automatically download & organize responsees with Acrobat.com".
I then click "Next" and write an email-address to send it to (i.g. to my own)
and then click "Send".
The program quickly writes
"Authenticating email-addresses"
and then gives the following error message
"Borland Database er ikke installeret. Kan ikke indlæse tjenesteudbyder af Corel-adressekartotetek."
("Borland Database is not installed. Can not read load service provider of Corel address directory.")
When I clik "OK" I get the error message
"Adobe Acrobat has encountered a problem and needs to close. We are sorry for the inconvenience."
I have undeleted and reinstalled Adobe Acrobat many times without any effect.
The same procedure has been tried on another computer without any problem.
What is my problem and how do I resolve it ?
Operating System Windows XP
Has worked may times before
Same results with other files
No recent system hardware or software change

This is the image that I have plus....
Reader 9.0 AcroRd32.exe caused Microsoft Visual C++ Runtime Library error
Preinstalled Adobe 9 Standard doesn't work on a new Dell out of the box - why would it?
Need help in creating a batch file that will add and remove some registy keys.
%userprofile%

Best Practice for Distributing Databases to Customers

I did a little searching and was surprised to not find a best practice document for how to distribute Microsoft SQL Databases. With other database formats, it's common to distribute them as scripts. It seems that feature is rather limited with the built-in
tools Microsoft provides. There appear to be limits to the length of the script. We're looking to distribute a database several GBs in size. We could detach the database or provide a backup, but that has its own disadvantages by limiting what versions
of the SQL Server will accept the database.
What do you recommend and can you point me to some documentation that handles this practice?
Thank you.

Its much easier to distribute schema/data from an older version to a newer one than the other way around. Nearly all SQL Server deployment features supports database version upgrade, and these include the "Copy Database" wizard, BACKUP/RESTORE,
detach/attach, script generation, Microsoft Sync framework, and a few others.
EVEN if you just want to distribute schemas, you may want to distribute the entire database, and then truncate the tables to purge data.
Backing up and restoring your database is by far the most RELIABLE method of distributing it, but it may not be pratical in some cases because you'll need to generate a new backup every time a schema change occurs, but not if you already have an automated
backup/maintenance routine in your environment.
As an alternative, you can Copy Database functionality in SSMS, although it may present itself unstable in some situations, specially if you are distributing across multiple subnets and/or domains. It will also require you to purge data if/when applicable.
Another option is to detach your database, copy its files, and then attach them in both the source and destination instances. It will generate downtime for your detached databases, so there are better methods for distribution available.
And then there is the previously mentioned method of generating scripts for schema, and then using an INSERT statement or the import data wizard available in SSMS (which is very practical and implements a SSIS package internally that can be saved for repeated
executions). Works fine, not as practical as the other options, but is the best way for distributing databases when their version is being downgraded.
With all this said, there is no "best practice" for this. There are multiple features, each offering their own advantages and downfalls which allow them to align to different business requirements.

Distributed database

Hi Everyone,
We are looking at different options to connect the forte application to
distributed database.
Any help greatly appreciated
Thanks & Regards
Raju
(Pothuraju Katta)
[email protected]
Phone: 847-969-3000
Fax: 847-995-8287
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Haidar,
Actually, SQL Server does not recognize "distributed database" as concept.
Based on your description, you want to access databases located at different locations. To achieve the requirement, you can create
linked servers
or configure
replication in SQL Server.
Linked servers provide SQL Server the ability to access data from remote data sources. Using these mechanisms, you can issue queries, perform data modifications and execute remote procedures.
Replication is a set of technologies for copying and distributing data and database objects from one database to another and then synchronizing between databases to maintain consistency. Using replication, you can distribute data to different locations and
to remote or mobile users over local and wide area networks, dial-up connections, wireless connections, and the Internet.
There are also detailed blogs and similar thread for your reference.
Distributed Databases in SQL Server 2005
http://www.c-sharpcorner.com/UploadFile/john_charles/DistributeddatabasesinSQLServer11122007092249AM/DistributeddatabasesinSQLServer.aspx
SQL SERVER – Shard No More – An Innovative Look at Distributed Peer-to-peer SQL Database
http://blog.sqlauthority.com/2012/11/27/sql-server-shard-no-more-an-innovative-look-at-distributed-peer-to-peer-sql-database/
How to implement distributed database in SQL Server 2008 R2?
http://stackoverflow.com/questions/7926773/how-to-implement-distributed-database-in-sql-server-2008-r2
Thanks,
Lydia Zhang

RE: Distributed database [Ref:C776312]

By "distributed database", do you mean that the database lives on several
servers, or that the database lives on one server which is distributed from the
application ?
Steve Elvin
Systems Developer
Frontline Ltd.
UK
-----Original Message-----
From: INTERNET [email protected]
Sent: Friday, October 23, 1998 12:13 AM
To: Steve Elvin; X400
p=NET;a=CWMAIL;c=GB;DDA:RFC-822=forte-users(a)sageit.com;
Subject: Distributed database [Ref:C776312]
Hi Everyone,
We are looking at different options to connect the forte application to
distributed database.
Any help greatly appreciated
Thanks & Regards
Raju
(Pothuraju Katta)
[email protected]
Phone: 847-969-3000
Fax: 847-995-8287
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

By "distributed database", do you mean that the database lives on several
servers, or that the database lives on one server which is distributed from the
application ?
Steve Elvin
Systems Developer
Frontline Ltd.
UK
-----Original Message-----
From: INTERNET [email protected]
Sent: Friday, October 23, 1998 12:13 AM
To: Steve Elvin; X400
p=NET;a=CWMAIL;c=GB;DDA:RFC-822=forte-users(a)sageit.com;
Subject: Distributed database [Ref:C776312]
Hi Everyone,
We are looking at different options to connect the forte application to
distributed database.
Any help greatly appreciated
Thanks & Regards
Raju
(Pothuraju Katta)
[email protected]
Phone: 847-969-3000
Fax: 847-995-8287
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Distributed database environment

In my one Jheadstart project, it will meet distributed database environment, that is some one project's application data be located in different oracle database .
How to treat this situation, about in one project to handle distributed database environment ?
Is the jheadstart support multi database connection ?
or need through database link capacity to fulfill !

Ting Rung,
There is at least one thing that you might run into, and that is the issue of transaction management. An application module represents a 'data model' for a tak that is accomplished within one transaction. You can nest application modules, but even then will the top-level application module provide the transaction context.
This means that all data that necessarily needs to be persisted in one transaction, needs to be represented by the same (hierarcy of) application module(s) and therefore must come from the same data source (database). Said in other words: when the customers are in one database and the orders in another, you cannot persist them in one and the same transaction.
There are more issues related to distributed applications. I have no experience with that, so I cannot comment on that. I do know that many distributed enterprise applications make use of EJB technology. BC4J supports entity beans (to be compared with entity and view objects). It also knows EJB application modules that behave like session beans. JHeadstart does not support using EJBs, however.
For further information about the support for EJB technology, I would like to refer you to the online help of JDeveloper.
Jan Kettenis
JHeadstart Team

No networkconnection with IPv6

Hi all,
I just configured our domaincontroller with an IPv6 address.
After that I enabled the IPv6 DHCP scope and configured the server to distribute IPv6 addresses.
It seems to work because all clients receive an IPv6 address but when I disable the IPv4 I lose connection with the network.
I configured our firewall with IPv6 as well, allowed IPv6 etc. ...
I also set a static IPv6 for our DC and fileserver but no result.
What I see is when I try to ping our DC from a IPv6 enabled client (with a failing network connection) I get a reply from the DC's IPv6 link-local address???
Pinging google outputs that it can not find the host.
Can anybody explain me what i'm doing wrong?
Kindest regards,
Stijn

Hi all,
I just configured our domaincontroller with an IPv6 address.
After that I enabled the IPv6 DHCP scope and configured the server to distribute IPv6 addresses.
It seems to work because all clients receive an IPv6 address but when I disable the IPv4 I lose connection with the network.
I configured our firewall with IPv6 as well, allowed IPv6 etc. ...
I also set a static IPv6 for our DC and fileserver but no result.
What I see is when I try to ping our DC from a IPv6 enabled client (with a failing network connection) I get a reply from the DC's IPv6 link-local address???
Pinging google outputs that it can not find the host.
Can anybody explain me what i'm doing wrong?
Kindest regards,
Stijn
Do you have ipv6 internet service?

How to use your own database with your users to authenticate in a Web app?

Hello, everybody!
I'm starting to write my first web application and I'm going to use JSF, JPA and EJB3 in this application. One of the first things that I have to do on it is the authentication part where I'll have a page with a user name and a password for the user to login. So, as I'm new to all this in Java (I've already implemented this on .NET in the past), I was studying the Java EE 5 Tutorial, especifically the section "Example: Using Form-Based Authentication with a JSP Page". But I saw that the users that the sample application uses come from the file realm on the Application Server. The users are created there and assigned a name, a password and a group. After the users are in the Application Server we can simply uses forms authentication declaratively in the deployment descriptor (web.xml).
But the problem is that this doesn't work to me as I already have my own database with my users, so I want to use it instead of having to create the users on the Application Server.
So, I'm asking you how to do that. Of course I'm not expecting that you place the code here to me as I know that such a thing could be complicated. Instead, I'm asking if you know about some tutorial, article, book or something that teaches how to do what I want. But I would like to see theses examples using JSF and/or EJB3 because these are the technologies that I'm using to develop. It's a pity that the Java EE 5 Tutorial doesn't have an example using a custom database as I know that this situation is very common in the majority of web sites.
Thank you very much.
Marcos

From memory, it goes like this... You just create a
raw jdbc connection on your user database using a
special "login" DB user account, which has
permissions only to an "authenticate" stored query,
which accepts two arguments: username & password, and
returns a boolean 0 or 1 rows found.When I implemented this in .NET's ASP.NET I had the same solution. I had an special user created in the database that I used to log in. When the real user entered his username and password I was already logged in and I had just to check his username and password agains the right table in my database.
But that was only possible bacause when I connected to the database using my hidden user, I used the rights APIs in ASP.NET that coordinate the authentication process. This means that before login in, no one could access any resources (pages, atc...). So what I'm saying is that I can't manager this manually in Java. Java has to have some API or whatever to allow me to control the login process programmatically, while letting the Application Server control the access to the resources.

DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           SAPLCLVF
Application Component CA-CL-CL
Date and Time          11.06.2014 12:08:28
Short text
     A table is unknown or does not exist.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCLVF" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A table is referred to in an SAP Open SQL statement that either does not
      exist or is unknown to the ABAP Data Dictionary.
     The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104     if dupl = kreuz.
105       insert auspc_v2 client specified from table auspcv2
106                              accepting duplicate keys.
107     else.
108       insert auspc_v2 client specified from table auspcv2.
109       if syst-subrc ne 0.
110         message a585 with tabausp.
111       endif.
112     endif.
113     refresh auspcv2.
114   endif.
115   read table auspcv3 index 1.
116   if syst-subrc = 0.
117     if dupl = kreuz.
118       insert auspc_v3 client specified from table auspcv3
119                              accepting duplicate keys.
120     else.
121       insert auspc_v3 client specified from table auspcv3.
122       if syst-subrc ne 0.
123         message a585 with tabausp.
124       endif.
125     endif.
126     refresh auspcv3.
127   endif.
128   read table auspnv1 index 1.
129   if syst-subrc = 0.
130     if dupl = kreuz.
131       insert auspn_v1 client specified from table auspnv1
132                              accepting duplicate keys.
133     else.
>>>>>       insert auspn_v1 client specified from table auspnv1.
135       if syst-subrc ne 0.
136         message a585 with tabausp.
137       endif.
138     endif.
139     refresh auspnv1.
140   endif.
141   read table auspnv2 index 1.
142   if syst-subrc = 0.
143     if dupl = kreuz.
144       insert auspn_v2 client specified from table auspnv2
145                              accepting duplicate keys.
146     else.
147       insert auspn_v2 client specified from table auspnv2.
148       if syst-subrc ne 0.
149         message a585 with tabausp.
150       endif.
151     endif.
152     refresh auspnv2.
153   endif.

Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano

How to keep same database with two different names in SharePoint 2013 for two different applications

Hi All,
I have very strange situation.
I had SP2010 production database(wss_content_contoso) migrated to SP13 few months back to migrate one site collection only while I have 15 site collections stored in this database and created a site contoso.com
Now, I want to migrate same(wss_content_contoso) SP2010 database to SP13 and want to create contoso2.com.
I changed database name from wss_content_contoso to wss_content_contoso2 and assigned newID during mount process.
After this exercise, I don't see any site for contoso2.com and issue seems to be the same database.
My question is!!!!
How I can keep both databases(actually same database with different names) and run both application simultaneously?
Any help appreciated!!
Thank you,
AM
AM Senior SharePoint Consultant

You need to run Backup-SPSite/Restore-SPSite on each Site Collection you want to 'duplicate'. You cannot restore the same Content Database to the same farm as the Site Collections have the same GUID, which is stored globally for the farm.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I build databases with appleworks over 10 years on my ibook, and continue to add to them. Now I have a macbook pro. How can I translate the databases to a compatible program?

Over 10 years I have built several databases with Appleworks. Now I have a macbook pro. How can I translate these databases to a 10.6.8 program?

Thanks Joe, but that won't work. I've finally found a site that answers the question: http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
I can only say that by Apple I have been royally screwed. I'll never buy another mac -- everything I do would simply disappear into cyberspace.

How to create a new database after copying an existing database with a new name

hi
i have an existing database and want to copy with a new name in sql server 2005 how do it is possible
spose
i have a db name attached in sql server StoreManagementDB now i want to copy this database with all the transactions as StoreManagementDB_1.
thanks

Use a two steps to use a backup file to restore a database with a new name.
----You need to have a full backup of your database:
--Step 1:
RESTORE FILELISTONLY
FROM DISK = 'C:\bk\TEST.BAK'
--Find out the LogicalName of data file and log file
-- in this case: the data file: TEST and the log file LogicalName: TEST_log
--Both names will be used in the MOVE command
--Step 2:
-- Restore the files for test1.
RESTORE DATABASE test1
FROM DISK = 'C:\bk\TEST.BAK'
WITH RECOVERY,
MOVE 'TEST' TO 'C:\bk\test1_Data.mdf',
MOVE 'TEST_log' TO 'C:\bk\test1_Log.ldf'
GO

Can I use two different database with DBSystemLoginModule?

Finally I can login with Database user id by DBSystemLoginModule on Embedded oc4j server.
But I confused between [b]jazn-data.xml and system-jazn-data.xml.
Which xml do I have to edit for jdbcUrl and jdbcDriver?
Now I would like to use two different database(such as only sid is different).
In this case I want to show specific database name as realm name.
What should I do?
When I use DBSystemLoginModule, I edit JdbcUrl in system-jazn-data.xml.
So can I pass the parameter for sid programmatically?
And also I tried to run my application with other database with DBSystemLoginModule on Embedded oc4j server.
I changed few things(jdbcUrl at system-jazn-data.xml,jazn-data.xml in embedded-oc4j-server/config and database connection for BusinessComponents at Project Properties of Model/ViewController.
But I got some error.
Did I miss something?
----< my error messgae >------
500 Internal Server Error
JBO-30003: The application pool (customer.model.datamodel.CMAppModuleLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002) Message was edited by:
Message was edited by:
sdcsdc

I think I understand now, you are modifing the custom login modules configuration within the system-jazn-data.xml file. This is a bit dangerous! Didn't you register the login module in your orion-application.xml? For example, this is the way I do it:
<web-module id="customProv-web" path="customProv-web.war" />
<persistence path="persistence" />

<security-role-mapping name="sr_developer">
<group name="developers" />
</security-role-mapping>
<security-role-mapping name="sr_manager">
<group name="managers" />
</security-role-mapping>
<jazn provider="XML">
<property name="custom.loginmodule.provider" value="true"/>
<property name="role.mapping.dynamic" value="true"/>
<property name="role.compare.ignorecase" value="true"/>
</jazn>

<jazn-loginconfig>
<application>
<name>customProv</name>
<login-modules>
<login-module>
<class>oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>data_source_name</name>
<value>jdbc/OracleDS2</value>
</option>
<option>
<name>roles_fk_column</name>
<value>userName</value>
</option>
<option>
<name>table</name>
<value>userinfo</value>
</option>
<option>
<name>groupMembershipTableName</name>
<value>groupinfo</value>
</option>
<option>
<name>groupMembershipGroupFieldName</name>
<value>role</value>
</option>
<option>
<name>usernameField</name>
<value>userName</value>
</option>
<option>
<name>user_pk_column</name>
<value>username</value>
</option>
<option>
<name>passwordField</name>
<value>passWord</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
<log>
<file path="application.log" />
</log>
<namespace-access>
<read-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</read-access>
<write-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</write-access>
</namespace-access>
</orion-application>

Distributed Database with IPV6

Similar Messages

Maybe you are looking for