Distributing customizing(control) data from SAP ECC to a non SAP System
Dear Experts,
I am currently working on an interface for distribution of different data to a non SAP System. One of these is customizing data (Company code, purchasing org. plant etc). The system expects a file and we shall implemet the following scenario: IDOC>XI>File
Questions:
1. Is it possible to use CONDAT Idoc to transfer customizing data to a non SAP System or is this only used for synchronisation of data between SAP Systems?
2.In case CONDAT cannot be used would you recommend creating a custom table, message type etc. for this case?
Please advise.
Thank you so much
Hi Narasimha,
We can do this with the help of PI. Please find the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404ee507-3fbc-2e10-00bc-be90ab28d036?QuickLink=index&overridelayout=true&52239687237174
Its from SAP PI to any other system.
Check this link too.. Proxy with Attachments.
Regards,
Siva
Similar Messages
-
Upload data from excel( XLS/xs format) in SAP CRM
Upload data from excel( XLS/xs format) in SAP CRM 7.0 as there is no *ALSM*EXCEL*ITAB* like FM there unlike ECC 6.0...?
hello Buddy,
plz go through below links
http://wiki.scn.sap.com/wiki/display/CRM/CRM+Web+UI+-+Uploading+data+from+Excel+files
http://scn.sap.com/docs/DOC-50732
http://scn.sap.com/docs/DOC-31985
Hope This will Help You... -
Distribute by Reference Data from Sender to Recipient planning function?
Hi all;
Im trying to use the planning function Distribute by Reference Data from Sender to Recipient to distribute the reference data by material to plan data.
This is:
Reference Data:
Version: 001
0vtype: 010
Material: M1; M2; M3
Sub-brand: SB1;
Price Group: PG1;
Customer: C1;
Area Manager: AM1;
Exercise/Period: 001.2008; 002.2008; 003.2008
Quantity: 100; 200; 300 -> 600
Plan Data 1:
Version: 002
0vtype: 02
Material: #
Sub-brand: SB1;
Price Group: #
Customer: C1;
Area Manager: AM1
Exercise/Period: #
Quantity: 1000
I want to distribute the 1000 according with the material reference data. The plan doesnt consider the Price Group and Exercise/Period.
Goal:
Plan Data 2:
Version: 002
0vtype: 02
Material: M1; M2; M3
Sub-brand: SB1;
Price Group: #
Customer: C1;
Area Manager: AM1
Exercise/Period: #
Quantity: 167; 333; 500
M1 = 100 / 600 * 1000
In the planning function I had use:
Fields for change:
Material: 0 - ZZ
Fields for conditions:
0vtype: 020
Exercise: 2008
Key figure: quantity
Version: 002
Old material: #
Reference characteristics:
0vtype: 010
Exercise: 2008
Material: (I didnt fill because it doesnt allow all the material items)
Key figure: quantity
Version: 001
When I execute the function a message appears:
No reference data
Can anyone help me?
Regards;
RicardoHi,
price group is missing in your reference data
D -
Unable to extract Customer Master data from MDC
Hello,
We creating an MDM-XI-ERP2005 Customer scenario. We want to work with all bussiness scenarios (not customizing scenario).
First I'm trying to extract Customer Master Data from EP 2005 using MDM_CLNT_EXTR.
I have created a New Variant which properties are:
Variant: CUSTOMER_TOTAL
Description: Send all customer data to MDM
Extraction Object: CUSTOMER_EXTRACT.
Target System: PI7.
But, the display jobs shows the following error: Could not determine recipients for message type MDMRECEIPT. Job cancelled after system exception.
We need to focus the problem. We have done the following ALE configuration.
SALE transaction:
In Basic Settings -> Logical Systems -> Define Logical System we have add the following logical systems:
EUS100
MDM: Master Data Management
PI7: Process Integration 7.0
WE21:
Transactional RFC -> PI7, IDOC record types SAP Release 4.x
RFC destination: SAPSLDAPI
BD64
New Model -> PFMC
Add message type: Model iview: PFMC
Sender: EUS100
Receiver: PI7
Message Type: DEBMDM
WE20 transaction shows:
Partner profiles -> Partner Type LS (logical system)
PI7: Outbound parmtrs. DEBMDM, SYNCH.
Any idea will be very helpful,
Thanks in advance
Marta.
Edited by: Marta Sánchez on Jul 9, 2008 12:34 PMSorry because I made a mistake in my previous message. ALE seems to be correctly configured. I'll try to update correctly my current situation:
In WE02 I can see al IDOCs that I'm trying to send to XI. All them have the IDoc Status = 3 (Data Passed to Port OK) instead of 12 Status Dispatch OK :(. So, It seems an tRFC error.
SM58 shows me more trails: "Basic type 'DEBMDM06' is unknown"
before that I have done the following steps at SAP ERP:
1. WE21: I have created a PI7 port with 700PI70CLNT RFC.
2. SM59: I have checked successfully 700PI70CLNT RFC connection.
3. WE20: I have created a PI7 Partner Type LS with the following inbound and outbound parameters: DEBMDM and MDMRECEIPT.
4. BD64: I have created a Distribution Model with DEBMDM and MDMRECEIPT message types.
and at SAP PI:
5.IDX: Port: SAPEUS. Client: 111. RFC Destination: PI7.
6. technical and business system for sender SAP system(System Landscape Directory)...
- Maybe some of the previous steps is not correct....
- Is RFC Destination = PI7 is correct in step #5?
- Is also necessary to configure more steps in PI system like RFC destinations or Transactional port?
- I have read that is neccessary to check that the option "transfer idoc immediately" in we20. How?
Please any idea will be very helpful.......
Thank you!
Best regards,
Marta. -
Error while replicating customer master data from R/3 to CRM
Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimalHello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c -
How to upload the data from excel(3 tabs) file to sap environment
Hi all,
This is Mahesh.
how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.Hi,
The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
You can find a solution for 2 worksheets in this post :
TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
I think you can easily modify it to handle any number of worksheets.
Hope it helps !
Best regards,
Guillaume -
Transfer of data from a third party application to SAP R/3 using PI
Hi experts,
I have a scenario where am supposed to transfer data from an application already developed to SAP R/3
Just wanted to confirm if the following approach is right
SOAP>PI>SAP R/3
we would have an RFC defined on SAP. this would be exposed as web service on PI which means i define the outbound interface to be exposed to as web service. Source system calls up the webservice.
Issues
1. Authentication mechanism to be used
2. type of adapter to be used between source system and PI. Assume either of SOAP or WS adapters would work
Valuable inputs are appreciated
Regards,
Kalyan1. Authentication mechanism to be used
Check this help section to know about the authentication mechanism:
http://help.sap.com/saphelp_nw70/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Check the Inbound Security Checks and the Security Parameters section.
2. type of adapter to be used between source system and PI. Assume either of SOAP or WS adapters would work
SOAP adapter should suffice...WS may not be needed.
Regards,
Abhishek. -
Fetch data from another mirosoft sql server to sap
Dear all,
I want to fetch data from another mirosoft sql server
to SAP(my sap server IN unix, oracle 10g).
Thanks
Shashi
Moderator Message: Try to do you own research before posting your question. Get back to the forums in case you are stuck with any issue
Edited by: Suhas Saha on Jul 26, 2011 3:21 PMhi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar -
Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM
Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich WortmannI would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use. -
Difference Between SAP ECC 6.0 and SAP Solution
Dear Experts,
We are in the process of implementing a new SAP Structure.
We are taking a hosted model from vendor which is called SBH (Subscription Based Hosting) of SAP Solution
So my question to all experts is that, what is the exact difference between SAP ECC 6.0 and SAP Solution SBH model.
If any comparison chart, it would be helfull.
Do reply asap.
Thanks in advance,
Nilesh JainHi Nilesh,
Looking at the image below, you will find out that ECC6 is under SAP ERP, and SAP ERP is under SAP Solution:
SAP solution is of a bigger element and ECC 6 is a component of it.
Regards,
Rod -
Integration of SAP ECC 6.0 with SAP Environmental Compliance 3.0
Hi Friends,
We have SAP ECC 6.0 running on Sun Solaris with Oracle as the DB. Now we are in the process of installing SAP Environmental Compliance Version 3.0 which is running in Windows 2008 Server and with SQL Server 2008 as its database.
I'm looking for an answer on how to integrate the SAP ECC 6.0 to SAP EC(Environmental Compliance) system.
Kindly provide your valuable inputs.Looking forward to hear from you soon.
Thanks and Regards,
VimalHello Vimal
regarding this software a number of publications are available:
http://help.sap.com/saphelp_ec30/EC300_FuncDocu_EN.pdf
Here you will find the list of rerequisites etc. and the integration e.g. into SAP EHS Management is explained.
In any case. The SAP marketplace is the right place to take a look regarding prerequisites and how to integrate this software with SAP core (SAP ECC 6.0) or with SAP EHS Management software.
As SAP EHS Management is technically part of ECC 6.0 the link to SAP Enviromental Compliance should be possible.
With best regards
C.B. -
SAP ECC 6.0 VS SAP 4.7 C
Hi All,
Can any one explain me SAP ECC 6.0 VS SAP 4.7 C ?A similar question was posted....
SAP 4.7 & ECC 5.0
Please browse the forum before posting a question...
Greetings,
Blag. -
Idoc b/w sap(r/3) and non sap system .
hi gurus,
how i pass an outbound idoc b/w sap(r/3) and non sap system .
which function module we will use in this scenerio for inbound and outbound idoc both
please guide me with an example .Hi Pawan,
Non SAP system should have RFC adapter in order to receive and send Idocs from/to SAP.
If this is not your case, you should us a Integrator Middelware with RFC and standard adapters like SAP Exchange Infrastructure.
If for example, your non SAP system is able to process data from flat files you can build next interface: SAP send Idocs to middleware that receive them using RFC adapter, middelware maps Idocs into flat file and send it to a one of non SAP system folder using FTP adapter. Non sap system triggers the flat file into its applications.
Reward points if useful.
Roger -
Demo - Extraction of Customer Master Data from SAP R/3 ECC6 to MDM5.5
Hello,
I am new to MDM . Would appreciate if someone can give a solution to the below request.
We are doing a demo project in our Company to extract all the master data related to SALES cycle. We are doing an extraction of Customer Master Data. Currently we have the unlicensed version of MDM and very soon we will get the licensed version.
We have the Customer Master Repository created in MDM Console. The IDOC type we are using is DEBMDM05.
Is there a easy way to map the fields of IDOC to the MDM Repository. Right now we are doing a manual process of comparing the IDOC fields and MDM Repo in an excel but this is tedious and time consuming.
Can anyone suggest an easier way to identify so that we know which fields match correctly.
Thanks
LeenaHi Leena,
First of all you have 2 options to generate IDOCs from SAP R/3 system
1.mdmgx>one IDoc per record
2.mdm_clnt_extr>for generating single IDoc having entire set of records.
Secondly,if you want to get the data mapped automatically,you should use standard maps provided by SAP(Business Content).
If at all you have created new fields then you should manually map those fields.
If any other queries pl ask
Reward points if found useful
Regards,
Pramod. -
Customer classification data from ECC to CRM
Dear Friends,
We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
Thanks,
Rajinikanth GAdded new fields using AET and did Middleware enhancements as per the note - Note 736595 - Exchange of EEW fields with R/3 customer master.
Thanks,
Rajinikanth G
Maybe you are looking for
-
Why can't I view my webpage on Mac OS X 10.3 or 4
I have a webpage that loads fine on a windows machine, but I cannot view it on a Mac. Is there something in the html that stops it from viewing? http://www.campmaker.com Any tips would be appreciated. iMac Dou Core Mac OS X (10.4.5)
-
I'm trying to schedule an scp of a file from one server to another, and append a current date to it, like so: 30 5 * * 0 scp /directory/file.bak admin@server:/directory/file.bak.`date +%m%d%y` This scp works from the command line, but cron doesn't li
-
Problem w/ Netbeans genereted jar file
Hi, My java application runs fine in the netbeans IDE. I had problems with the jar file it created a while back which turned out to be that i had an older version of JRE still installed. Anyway they worked fine until recently, when i started geting t
-
Can I copy a file directly from a DVD inserted in the external Super Drive of my MacBook Air to an USB key connected to the other USB port ?
-
Kde 3.5.2 and polish keyboard
Hi, Just as I installed the new kde 3.5.2 Polish keyboard layout does not produce Polish letters anymore. How can I repair that? Any Suggestions?