Distributing library - What could prevent my lib from beingmade ?

(8) CMD: SetProjType 3
(9) CMD: Partition 3
USER ERROR: The project MYPROJ is already contained in version of
application and cannot be placed into another library application.
Class: qqsp_UsageException
Error #: [1602, 562]
Detected at: qqcf_LibraryConfig::SetProject at 1
Error Time: Wed Sep 1 15:30:25
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1, taskId =
[4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1.1]) in application
"fscript", pid 18036 on node mynode in environment myenv.
Thanks for any suggestion
j-paul
[Jean-Paul Gabrielli]
NOTE: If you got this twice, sorry but I got a strange mail saying i was not a subscriber and reposted.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Similar Messages

  • RE: (forte-users) Distributing library - What could preventmy li b fro

    Hi Jean..
    I remotely remember seeing this kind of a problem before. I think you can
    start by cleaning your environment. You can do this by:
    1) Exporting your environment definition from econsole or using escript. The
    .edf file goes into the forte_root\envdist directory
    2) bringing down the environment.
    3) removing the .btd and.btx files of the environment in
    forte_root\sysdata\envrepos
    4) start the environment using bootstrap i.e using the -e option.
    Hope that solves it for you..
    Ravi Kalidindi
    Born Info Svcs Inc
    -----Original Message-----
    From: Jean-Paul Gabrielli [mailto:[email protected]]
    Sent: Wednesday, September 01, 1999 9:04 AM
    To: '00 Forte Mailinglist'
    Subject: (forte-users) Distributing library - What could prevent my lib
    from being made ?
    (8) CMD: SetProjType 3
    (9) CMD: Partition 3
    USER ERROR: The project MYPROJ is already contained in version of
    application and cannot be placed into another library application.
    Class: qqsp_UsageException
    Error #: [1602, 562]
    Detected at: qqcf_LibraryConfig::SetProject at 1
    Error Time: Wed Sep 1 15:30:25
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1, taskId
    =
    [4C0B7D30-6055-11D3-B8B3-2E3EAC99AA77:0x126:0x1.1]) in application
    "fscript", pid 18036 on node mynode in environment myenv.
    Thanks for any suggestion
    j-paul
    [Jean-Paul Gabrielli]
    NOTE: If you got this twice, sorry but I got a strange mail saying i was not
    a subscriber and reposted.
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

    Hi,
    I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
    The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
    Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
    Anyway, thank you,
    Chris

  • What is preventing my Mac from sleeping?

    Ever since installing Lion, both of my Mac Pros don't sleep properly.
    When the machine wakes, the Mail notification sound, sounds many, many times.  EG:  If I have receives 100 emails since sleep, it notifies me 100 times.
    How can I tell what is preventing my Mac from sleeping, or is this multiple mail sound something else?

    There are few threads in this site discussing the same issue.
    Causes sited are
    File sharing as mentioned in your post,
    Recently installed antivirus software,
    External HD not properly ejected,
    Print Que not cleared
    and Mail constantly checking for new mail that you can change in Mail > Preference >General.
    Solutions suggested are
    Reset PRAM and SMC
    and Repair Disk using  Recovery HD.
    Best.

  • What can prevent NI-DAQ from installing on a computer?

    What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.

    duane wrote:
    What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.
    I was able to remedy problem by using windows explorer to view ni-daq cd and run the nidaq.msi in the nidaq dir. Going this route caused a user window to appear that allows you to remove all / repair etc. I selected the remove all option which then removed whatever had been installed on previous installation. I then went the usual route of control panel\settings\remove s/w to remove the MAX. I then went back and ran setup.exe in the nidaq cd root dir and everything installed properly. The key was the first step mentioned above. The control panel\settings\remove s/w display did not show ni-daq evidently due to prior improper installation which prevented uninstalling this way. The autorun feature of the ni-daq cd did not deal with the improper installation because it would simply say it successfully installed when it did not install any thing. The original installation that improperly installed the ni-daq was when I installed the labview full development system. Everything else installed correctly at that time except for ni-daq. Who Knows?

  • ICloud Photo Library: How to prevent some photos from being uploaded/synced?

    When iCloud Photo Library is on, every photo will be auto-uploaded and synced to all linked devices/computers, is there any way to specify which ones not to be uploaded? I know I can 'hide' photos so they won't appear in 'All photos', but they are still accessable from Albums.

    No you can't be selective with what gets uploaded to the cloud. You might consider having a second library for photos you don't want in the cloud.

  • Currently cannot open pdf files when using firefox, but can open them in ie... have current adobe downloads..what could prevent opening pdf files such as forms on irs site using firefox

    When attempting in firefox to open a pdf file such as forms on the irs site, I get a white screen with a black long oval in the center with a blue line inside the black oval. Can go to internet explorer and it works fine. Have loaded the latest adobe acrobat. Also went to firefox help and looked at add ons and plug ins and do not see anything obvious

    Hi
    What's your portal version ?
    What response headers do you receive from the webcache port ? (using something like IEhttpheaders but for mozilla, maybe Firebug will help you to get them).

  • Cap6 What would prevent a project from jumping to previous slides?

    My current project is using buttons with jump to slide to move between four slides in sequence.  When the project is previewed the buttons that progress forward work correctly however none of the buttons that go to previous slides work.
    When the progress bar is moved back it does not move past a certain point.  If you move the progress bar forward rapidly you can then access the previous slides and the buttons begin to function correctly.
    Has anyone encountered this issue and found a resolution?

    How did you check? Preview in browser or after publishing? Are those the navigation buttons on a default playbar or custom buttons?
    Do you have question slides? If yes, what are the Quiz settings? Do  you allow Backwards navigation, what is the Required setting?
    Do you have pretest slides? Is Branch aware checked?
    Which version (exact number) of 6? I'm asking this because the version ending on 199 had some navigation problems.

  • What would prevent AS3 to function in an otherwise working copy...

    of Flash CS5.5? I upgraded from Flash 8 to CS5.5 recently. I've used Flash strictly for animations until recently so haven't really tinkered with AS3 at all. I tried some tutorials and got "1120 Property not recognized errors" and assumed that there was something wrong with my settings or my code. After uninstalling, reinstalling, reformatting, and trying several sample files I've found online, it's clear that the AS3 function just is not compatible with my computer. The animation functions work perfectly, but I cannot get the debugger to connect and AS# refuses to recognize any instances on the stage (and, yes, I have triple checked that publish settings are set to do so. ) Is this unusual? What would prevent the AS3 from working when everything else is fine?

    Below is a link to an fla I just created that uses your code with the two objects identified by the code.  This file is created using CS3.  See if it tests okay for you.  If so, see what is different about it that might be the cause for yours not working.  If not, there are some Adobe folks infrequently in the Flash General forum you might want to try to get the attention of.
    http://www.nedwebs.com/Flash/Move_trun.fla

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • What does this mean: ERROR! Shared library ioser12 could not be found.

    Hi all,
    I am trying to establisch a JDBC connection to a MaxDB database (former SapDB).
    I have a win2k system with jdk 1.4.2_01 installed.
    I have the JDBC connection working in the sense that i am able to execute SQL scripts by ant tasks,
    so far i think that everything is properly configured.
    Nevertheless, when i try to use the connection in my own class (a JUnit testcase), i get this message:
    "ERROR! Shared library ioser12 could not be found."
    The program then continues, and i get sql error messages that the user is still connected. I think these are followups from the first one - one testcase may be broken by this error, but the connection is not closed.
    I searched the web to find what i could do against it. I found some forum discussions about this problem and hence i tried to set my path and classpath to locations where the isoser12.dll is located (runtime environment/bin), and finally copied it to the windows/system32 dir.
    Nothing made this error disappear. I am still stuck with this one since two days.
    Btw, the same testcases work well with other databases like oracle or db2.
    Hence, i am calling to you for some ideas about this error.
    Thank you in advance for help,
    Andreas Schroeder

    Hi Andreas,
    I am also interested in making maxdb(sapdb) work with S1 application server. I would appreciate if you could let me know if you are able to make it work with S1 V8 server.
    Thanks,
    Gorton Zhao
    Hi all,
    I am trying to establisch a JDBC connection to a MaxDB
    database (former SapDB).
    I have a win2k system with jdk 1.4.2_01 installed.
    I have the JDBC connection working in the sense that i
    am able to execute SQL scripts by ant tasks,
    so far i think that everything is properly configured.
    Nevertheless, when i try to use the connection in my
    own class (a JUnit testcase), i get this message:
    "ERROR! Shared library ioser12 could not be found."
    The program then continues, and i get sql error
    messages that the user is still connected. I think
    these are followups from the first one - one testcase
    may be broken by this error, but the connection is not
    closed.
    I searched the web to find what i could do against it.
    I found some forum discussions about this problem and
    hence i tried to set my path and classpath to
    locations where the isoser12.dll is located (runtime
    environment/bin), and finally copied it to the
    windows/system32 dir.
    Nothing made this error disappear. I am still stuck
    with this one since two days.
    Btw, the same testcases work well with other databases
    like oracle or db2.
    Hence, i am calling to you for some ideas about this
    error.
    Thank you in advance for help,
    Andreas Schroeder

  • I recently installed IOS 8.02 and Photoshop Express cannot access my full library of images. What could be the problem? Also, w

    Problem with Photoshop Express IOS 8.02 - I recently installed IOS 8.02 on my iPad Air and Photoshop Express cannot access my full library of images. Also, when opening the app, I'm not given the option of selecting "Open from Adobe Revel", "Take a Picture" or "Open from Camera Roll".......I am taken directly to a small selection of images. The only images that show up are the saved photos previously adjusted through Photoshop Express. I also updated my iPhone 5s with IOS 8.02 and Photoshop Express works perfectly on the iPhone with all images in my library visible.
    What could be the problem?

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • Hello - I used a Sony DVD to burn 350 songs. When I put the DVD into another computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. What's preventing songs from being ripped?

    Hello - I used a Sony DVD to burn 350 songs from my iTunes library to share with a friend. When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. Anybody know what's preventing me from ripping what's on the DVD? 

    When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes.
    The import command only works with audio CDs. So if you burned the files in mp3 format, try instead using the "File > Add file to library" or "File > Add folder to library" commands.

  • A number of imported photos from iphoto in imovie project all show the same image whilst the preview before dragging them in is correct. What could be the problem?

    A number of photos from iphoto used in imovie project all show the same image when playing back. The previw when clicking and dragging them and also the pictures in the storyline. Yet when playing the clip a previous immage keeps on appearing. What could be the problem?

    You created a mess and there is no solution - with the actions you have taken those photos are gone unless you have access to them from some other source - they existed in two place - in your iPhoto library and on your backup drive - you have traded the backup drive and restore an earlier iPhoto library so all you have is what you have
    LN

  • HT1449 Help! This all runs quite smoothly until i get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.'  Any suggestions? Thank you!

    Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.'  Any suggestions? Thank you!

    I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

  • I'm downloading my apps from my desktop, but when i'm downloading apps from my laptop, the apps can't be transfered. what setting could i adjust so that i could transfer my apps from my laptop to my ipod touch4. Thank you very much-ariston

    i'm downloading my apps from my desktop, but when i'm downloading apps from my laptop, the apps can't be transfered. what setting could i adjust so that i could transfer my apps from my laptop to my ipod touch4. Thank you very much-ariston

    You can only sync to one iTunes Library/one computerbut you can manage music among different computers.  See:
    Using iPhone, iPad, or iPod with multiple computers
    The only way to sync app from the desktop computer is to make that the syncing computer.  You can't sync app from more than one iTunes Library/one computer.
    To make the desktop computer the syncing computer you have to:
    - get all apps and other item on the desktop computer
    - Authorize the computer for the iTunes accounts inquestion
    - Connect the iPod to the desktop computer and make a backup by right clicking on the iPod under Devices in iTunes and selecting Backup
    - Restore the iPod from that backup

Maybe you are looking for