Distributing qualification notes maintained in PPPM

Hi Guys,
We are sending Q, P and amongst other things the relationship A032 from R/3 4.6C to ECC 6.0 LMS via the transaction PFAL which sends a HRMD_A message type (idoc type HRMD_A05). The problem is that the notes that are maintained in transaction PPPM for qualifications are not transferred in the idoc as standard. Has anyone solved this problem before? Any help would be greatly appreciated.

Any inputs???
Thanks
SKR

Similar Messages

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

HP Officejet 6500A Plus will not maintain wireless connection reliably

For the HP EXPERTS on Expert Day, April 18, 2012:
B.L.A.T. (Bottom Line At Top): We have an HP Officejet 6500A Plus purchased about 5 months ago. We wanted to use it as a wireless-connected printer in another room besides our home office. It is useless to us because it will not maintain its wireless connection, even sitting just a few feet from the router in the same room. Except for numerous hours of troubleshooting, we have left it sitting powered up, but unused and idle, for almost the entire 5 months in our home office. DURING ALL THAT IDLE TIME, IT HAS LOGGED OVER 3,200 DISCONNECTS, at a consistent rate of 24 disconnects every 24 hours, even though it ALWAYS reports that the wireless signal quality is “EXCELLENT” (all this is according to the Wireless Network Test Reports we’ve printed throughout the last 5 months). So our question is, what is it that this printer is trying to do once an hour over a wireless connection that is causing these thousands of disconnects? And how can we stop it?
NOTE! Before you round up the usual suspects (namely our router and our PC firewalls) please note that we also bought an HP Officejet Pro 8600 Plus ON THE SAME DAY as the Officejet 6500A Plus. The 8600 was also installed with a wireless connection, and has worked without a single network issue for the entire 5 months.
NOW, FOR THE REST OF THE STORY…
WHO WE ARE: My wife and I have worked on HP equipment for 33 years, starting in 1979 as corporate customers of HP when we worked for Exxon; then we both worked for HP directly for 17 years; and we’ve now used dozens of pieces of HP equipment in our home during the last 12 years in retirement. We’re primarily software folks, so we’re not exactly experts in hardware and networking, but on the other hand, this ain’t our first rodeo either.
OUR CONFIGURATION:
PC’s – All running Windows 7 x64 with all important patches applied and Norton Internet Security 2012: HPE-270f and HP AIO 200-Quad, each with full 6500A and 8600A drivers installed on wireless connection. These 2 PC’s themselves can connect either wirelessly or via Ethernet to our home network. The 270f has a dual-band wireless board. Both bands work. We also have a new dv7t laptop with only the full 6500A driver installed via wireless connection. The laptop is now upstairs and it’s connected to our home network wirelessly without any issues. (This is where we had hoped to also put the 6500A, but it needs to work reliably via wireless connection.)
ROUTER: Netgear N600 WNDR3700 providing Ethernet and wireless networking. Router provides a very strong wireless signal throughout the house. No wireless problems with any other equipment including an iPod, two Kindle Fires besides all the HP equipment.
PRINTERS: Besides the two HP printers, the HPE-270f PC has a Canon MP960 installed on it. And if we can’t get the 6500A working right or replaced with something that does work right, we may be buying our second Canon printer. By the way, on the 6500A, ePrint and App’s are set to ON, but of course they’re not being used, just like everything else on this AIO.
OTHER: We also have a Sonos music system that connects to our network via Ethernet and has its own proprietary mesh network (on another frequency) for transmitting ripped music wirelessly to speaker units throughout our house. (If you aren’t familiar with this totally cool system, check out sonos.com). We’ve never seen any evidence of interference between these two wireless networks, or our wireless phone sets either.
HP TOOLS AVAILABLE ON ALL 3 PC’s: HPU
UPDATE 5.003.001.001 (reporting everything up-to-date); HPHDU 3.1.0.17; HPPDU 5.0.0.015 and HPNDU 4.3.0.002.
SYMPTOMS: The 6500A Plus installs quickly and easliy, and connects wirelessly just fine during installation. But sometime over the next hour (usually less), it disconnects and won’t print from PC applications. Sometimes the application puts up an “Unable to communicate with printer” screen, even though the PC usually thinks the printer is “ready”. Other times, the PC thinks the printer is offline (but printers don’t have “offline” buttons anymore!). Often, if you just leave everything alone, the 6500A will somehow reconnect and print out the spooled file 5-30 MINUTES later. So it does usually seem to be able to recover given some time, but that doesn’t always fit our schedule! Occasionally, turning the wireless radio on the printer off and back on will fix it right away. But usually, you have to power the printer completely off, and then back on. As far as we know, that always fixes it…..until the next disconnect a few minutes later!
PREVIOUSLY TRIED: After reading some of HP’s wireless network support websites, I manually assigned a fixed IP address to this printer. It didn’t seem to matter; according to the wireless network test report, it still logs disconnects at the rate of one per hour, and all the failure symptoms were the same.
We also dabbled a bit with setting this printer as “trusted” to the Firewall, but that didn’t seem to matter either.
Next, we connected the printer via Ethernet. The printer immediately started to work, even though it had just been in its “failed” state over the wireless connection. As far as we know, it never failed while connected via Ethernet. This seems to point to a purely wireless hardware/firmware problem on the printer itself.
Late last year, I tried two different chat sessions about this with the inter-continental AIO support teams, each one lasting several hours. Unfortunately, none of their optimistic solution scripts seemed to fit our problem. They both seemed determined to reconfigure the 6500A as a TCP/IP printer, which of course worked fine initially, just like everything else. At this point, they would understandably want to close the chat. But 20-30 minutes later, we could no longer print to it. During the second chat, they got into one of our PC’s remotely and effectively turned off the spooler (by selecting “Print Directly” or something like that). After that, all was well again (as usual) UNTIL the printer disconnected, at which time attempting to print from that PC would HANG the application (since the spooler was no longer buffering) and eventually hang the whole PC. One giant leap backwards. That’s when I gave up on the multi-hour chat sessions.
The three diagnostic utilities (HDU, PDU, NDU) have been tried over and over. When the printer is in its disconnected state, the DU’s usually don’t detect the 6500A at all, or if they do detect it, they are unable to fix anything. Frankly, it’s easier to just power the printer off (which takes about a minute) and power the printer back on (which takes more than a minute) and then wait for the spooler to kick in (usually about 30 seconds). BUT WE DON’T CONSIDER THAT A SOLUTION!!
B.L.A.B. (Bottom Line At Bottom): We have used up nearly the entire black ink cartridge and at least a ream of paper troubleshooting this brand new printer, to no avail. This printer is useless to us unless it can maintain a wireless connection reliably. Please help!
Thanks –
Bob and Jane
(Note: we have an appointment from about 11:20 am EDT – 1 pm EDT, 8:20 am PDT till about 10 am PDT)

I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

Fiscal year variant is not maintained for calendar year 2009

Hi,
After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
Please provide some information/resolution to this.
Thanks,
Shantanu.

HI,
Please ensure that you have defined your fiscal year variant in OB29
correctly. It is necessary that:
1. the previous year has been maintained,
2. an entry for Dec 31 exists in each fiscal year,
3. the following fiscal year has been maintained.
Hope this helps.
Regards,
Nitin

Fiscal year variant Z1 is not maintained for calendar year 2012

I am getting this error while scheduling infopackage for 2lis_02_HDR.
Fiscal year variant Z1 is not maintained for calendar year 2012
PLease let me know how to solve thhe issue.
Thanks,
harika.

Hi,
Where are you geting error, before execution or duing execution of DTP in the log.
Check if you have transferred fiscal year variants from source system to BW. Then trigger DTP.
Regards,
Pravin Karkhanis.
Edited by: Pravin Karkhanis on Oct 18, 2011 4:15 AM
Edited by: Pravin Karkhanis on Oct 18, 2011 4:15 AM

Internal unit GAL, language EN is not maintained

Hi All,
i am facing problem with "Internal unit GAL, language EN is not maintained
Message no. BM302" error while running the report...some one gave solution for this problem..still i am getting same problem ....please any one give explaination about that error why it is coming like that and also solution?
Regards,
surendra.

hi..
i check it in that Tcode (S_BCE_68000183 or CUNI )..but it is not there..what can i do now?can any one explain about that problem? it means why it is coming like that?

Fiscal year variant Z1 is not maintained for calendar year 2012 when loadin

Dear Experts,
We are working on BI7.0 extracting data from ECC 6.0.
I am trying to load data from 0HR_PY_PP_1 which is a Self DataSource in our BW System (extracts data from 0EMPLOYEE and 0PERSON) to load into ZPA_C50 which is a copy of BCT InfoCube 0PAPA_C02 (Headcount).
The data has come through into the PSA very well.
However, DTP is throwing an error while loading 32242 records of data from PSA into ZPA_C50 InfoCube. The error details as below:
Error while updating to target ZPA_C50 (type INFOCUBE)
Fiscal year variant Z1 is not maintained for calendar year 2012 FGV 2
Messages for 1 data records saved; request is red acc. to configuration
Processing Terminated
We are actually doing a Re-implementation of BW 3.0b in BI 7.0 Ehp1. We have imported Maintenance of Fiscal Year Variant from the BW 3.0b Production System. So this shouldn't be a problem I guess since I have also checked the setting in SPRO in BI 7.0 Development (New) System and they are looking good.
Also, when I do a Filter on 0CALDAY in DTP from 01.01.1900 to 31.12.2010, the loads are working fine. I want the load to run without any Filters on 0CALDAY.
Has anyone been in similar situation. How did you resolve this issue? Your time is very much appreciated.
Thanks in advance.
Chandu

Dear Experts
Thanks for your time.
We have resolved this issue ourselves. We have maintained 'Shortened Fiscal Years' for 'Z1' and it is working fine now. Steps are as below:
In BI Dev System -> SPRO -> SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Intelligence -> General BI Settings -> Maintain fiscal year variant -> Select 'Z1' Fiscal Year Variant and then DoubleClick on 'Shortened Fiscal Years' to set the Fisc Year Variant -> Save.
The dataload should work fine now.
Cheers,
Chandu

Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
Ravi

Hi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi.

Unit of measure is not maintained at level2 DSO

Hi Experts,
Unit of Measure is not maintained in level2 DSO.
Scenario:
We have a Product having values for different market in DSO UOM is Millions and Aggregated Value of that product is loaded in upper level DSO Unit of Measure is not maintained it shows blank.
Solution: We have done selective deletion and uploaded again from the DSO where UOM is maintained correctly, Issue is resolved.
We would like to know the cause of the issue.
Please any let me know how to isolate the issue and if you have time let me call you to investigate further.
Regards,
Prem

Hi Murali,
UOM is maintained in level1 DSO correctly and for certain aggregated values it is not maintained and this very strange if we do manual upload data UOM is correct in Level2 DSO.
I guess issue happening in regular data load or what so ever....
We are trying to correct the data just by deleting and uploading again as this is permanent solution.
If routines are the issue when we upload manually it shouldnt work but still working fine... this strange behaviour....
please suggest and advise me... if required let me call you.
Regards,
Prem

Fiscal Year Variant not Maintained

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

hi,
please check the below path,
spro--Financial Accounting (New) -- Asset Accounting -- Valuation -- Fiscal Year -- Fiscal Year Variants -- Specify Other Versions on Company Code Level and Specify Other Versions on Depreciation Area Level.
check the above path, is there any FY is assigned to your company code or Depreciation Area.
regards,
Gopi.P

Logon Error Message - Enterprise Services Builder address not maintained

Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.

Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani

BP Relationship - Partner Function Assignment not maintained

During the initial load for CUSTOMER_REL the Partner Function Assignment is not maintained for the Relationship "Usage". We want to default this information based on the Sales Area data of the Sold to party and Partner Function maintain in the ECC KNVP and/or KNVK. Anyone have any experience in accomplishing this?

Hi
Go to transaction VOPA and maintain partner determination
In the customer master , VD01 maintain partners for this customer for whom you are creating the sales order
Hope this helps
Cheers
N Ganesh

Item category determination customizing not maintained error in CRM_IC

Hello Solution Manager Gurus
I have configured IC Web Client.. But in service ticket tab i am getting Item category customizing not maintained error. Similarly i dont know where to create SLA information for service ticket in solman system.
Please help me
regards
Naveen

Sure Naveen
I think you have my email id with you
And for the customization guide of Webclient, it is available on http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
C78: CRM Interaction Center (WebClient)
Hope this will help
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

Profit Center was not maintained during order n billing creation.

Dear, Gurus
I'm facing a problem of Profit Center. User created a service material, maintenance contract. They created a Billing Document as it is order related billing. Accounting document was not generated when saving invoice. When I got to the bottom of this I realized no costing tabs were ever maintained for material type services. (Henceforth no Profit Center in Sales Order n Invoice).
I have done the necessary config n assignments but question now is what should I do as in billing doc the field is greyed out it will not allow me to assign Pr Center now. I am thinking that this may work if I cancel the billing document and then go back to sales order and try and changing the field, then re-create the invoice. I'm trying to avoid canceling. Is there any program, bapi, user exit I may use to re assign or make system re check the MM while saving invoice to allow accounting document to be created? This is one scenario.
2nd scenario is similar but in the case of this contract everything was made. Accounting document was cleared even but with some dummy weird Profit Center. (No proft center in Order nor invoice.) Whole problem at first in this scenario is User saying everything is complete so status in doc flow should show maintenance contract as complete but wasn't. it showed being processed. I discovered no completion rule was maintained. I maintained E Full target value referenced but status still has not changed any idea guys? (New config not showing on old existing data only show on new document, concept?) Is there a program or anything to make system update status doc flow? aside from this Profit center incompletion log is coming in Contract. Not maintained in order or invoice.

In one of my earlier projects, a similar requirement was putforth by users and we had developed a zee tcode to change the profit center in billing document via SM30 which can be done only by FI authorised users.
I am reproducing the said program as under:-
REPORT "ZPROFIT_CHG"
TABLES : VBRP.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS : SO_VBELN FOR VBRP-VBELN OBLIGATORY.
PARAMETERS:      P_PRO LIKE VBRP-PRCTR OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF IT_VBRP OCCURS 0,
        VBELN LIKE VBRP-VBELN,
        POSNR LIKE VBRP-POSNR,
        PRCTR LIKE VBRP-PRCTR,
      END OF IT_VBRP.
DATA COUNT(3).
DATA W_MESSAGE(30).
START-OF-SELECTION.
LOOP AT SO_VBELN.
       IF SO_VBELN-LOW CA '~`!@#$%^&*()_+|\=-><,.;":' OR SO_VBELN-HIGH CA '~`!@#$%^&*()_+|\=-><,.;":'.
           MESSAGE 'Special character not allowed' type 'S'.
           LEAVE LIST-PROCESSING.
           STOP.
       ENDIF.
ENDLOOP.
IF P_PRO CA '~`!@#$%^&*()_+|\=-><,.;":'.
           MESSAGE 'Special character not allowed' type 'S'.
           LEAVE LIST-PROCESSING.
           STOP.
ENDIF.
SELECT B~VBELN B~POSNR B~PRCTR FROM VBRK AS A INNER JOIN VBRP AS B ON A~VBELN EQ B~VBELN INTO CORRESPONDING FIELDS OF TABLE IT_VBRP
                            WHERE A~VBELN IN SO_VBELN
                            AND   A~FKART EQ 'ZFF2'
                            AND   A~FKSTO NE 'X'.
IF SY-DBCNT EQ 0.
      MESSAGE 'NO DATA FOUND' TYPE 'S'.
      LEAVE LIST-PROCESSING.
ENDIF.
SORT IT_VBRP BY VBELN.
DELETE ADJACENT DUPLICATES FROM IT_VBRP COMPARING VBELN.
CLEAR COUNT.
IF IT_VBRP[] IS NOT INITIAL AND P_PRO IS NOT INITIAL..
      LOOP AT IT_VBRP.
          UPDATE VBRP SET PRCTR = P_PRO WHERE VBELN = IT_VBRP-VBELN AND POSNR = IT_VBRP-POSNR.
          IF SY-SUBRC = 0.
             COUNT = COUNT + 1.
          ENDIF.
          COMMIT WORK.
          CLEAR IT_VBRP.
      ENDLOOP.
ENDIF.
IF COUNT IS NOT INITIAL.
    CONCATENATE 'No Of Records Updated Is - ' COUNT INTO W_MESSAGE.
    MESSAGE I000(ZSFL) WITH W_MESSAGE.
ELSE.
    MESSAGE 'No Records Updated' TYPE 'S'.
ENDIF.
Since I am so weak in ABAP coding, not sure whether the above coding is correct. You need to check with your ABAPers and develop this logic. This should work.
thanks
G. Lakshmipathi

Getting error logical file name not maintained adequtely

Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
    DATA: lt_rows TYPE lvc_t_row.
    CASE e_ucomm.
      WHEN 'DOWNL'.
Determine and construct OS specific file name                        *
        PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
                           pf_with_file_extension
                           pf_param_1
                           pf_format
                           pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in    *
download file name                                                   *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
    EXPORTING
CLIENT                        = SY-MANDT
      logical_filename              = 'Z_MATERIAL_BOM_FILE'
      operating_system              = pf_os
      parameter_1                   = lf_para1
PARAMETER_2                   = ' '
PARAMETER_3                   = ' '
USE_PRESENTATION_SERVER       = ' '
      with_file_extension           = pf_with_file_extension
USE_BUFFER                    = ' '
    IMPORTING
EMERGENCY_FLAG                =
    file_format                   = pf_format
    file_name                     = pf_fname
EXCEPTIONS
   file_not_found                = 1
   OTHERS                        = 2
Error handling.
CASE sy-subrc.
    WHEN '1'.
      MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'.                     "error message i am getting      LEAVE.
    WHEN '2'.
      MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
      LEAVE.
ENDCASE.

Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani

Distributing qualification notes maintained in PPPM

Similar Messages

Maybe you are looking for