Distributing software to DP's - server nbame is empty in address

1 Primary Site
1 Secondary Site
2 DP's attached to the secondary
Software was distributing fine as of last Friday. I distributed a package today and could see it flow from the primary to the secondary and the packages registered fine. However when the secondary tries to create a thread to send the pkg to the
DP's I see the following:
~Created sending thread (Thread ID = 0x111C) $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:43:52.248+360><thread=3916 (0xF4C)>
No (more) send requests found to process.~ $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:43:52.248+360><thread=3916 (0xF4C)>
~Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:43:52.248+360><thread=3916 (0xF4C)>
~Waiting for new/rescheduled send requests, Maximum Sleep Time = 20 minutes $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:43:52.248+360><thread=3916 (0xF4C)>
Sending thread starting for Job: 30213, package: PCA000D0, Version: 6, Priority: 2, server: XXXXXXDP1.AD.XXXCORP.COM, DPPriority: 200 $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:12.263+360><thread=4380 (0x111C)>
~Server name is empty in address. $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:17.270+360><thread=4380 (0x111C)>
~Couldn't parse the address. $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:17.270+360><thread=4380 (0x111C)>
~Attempt to connect failed. $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:17.270+360><thread=4380 (0x111C)>
~Restart time = 3/11/2014 5:53:17 PM Mountain Daylight Time $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:17.270+360><thread=4380 (0x111C)>
~ Sending failed. Failure count = 1, Restart time = 3/11/2014 6:14:17 PM Mountain Daylight Time $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:17.270+360><thread=4380 (0x111C)>
Sent status to the distribution manager for pkg PCA000D0, version 6, status 4 and distribution point ["Display=\\xxxxxxdp1.ad.xxxcorp.com\"]MSWNET:["SMS_SITE=BOI"]\\xxxxxxdp1.ad.xxxcorp.com\~ $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014
17:44:17.286+360><thread=4380 (0x111C)>
Sending thread complete~ $$<SMS_PACKAGE_TRANSFER_MANAGER><03-11-2014 17:44:17.286+360><thread=4380 (0x111C)>
I can ping the server just fine. Can anyone point me in the right direction here? In 2.5 years dealing with CM I've never run across anything like this.

Hi,
The address cannot be defined if the DP is already installed.
Please make sure the IP of the sever("I can ping the server just fine.") is the same with the IP of DP.
If IPs are the same, please have a try after closing the firewall.
If it stills not work, please try to reinstall the DP.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

Dear Expert,
I setup SharePoint for 3 tiers, WFE, APP + DB Server.
I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx but I stuck in no.2, I cannot start the services, in picture below.
I checked the SSRS provision is disabled not online
Please help.

Hi MasterBird,
According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
As this
article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
hosts an instance of the Database Engine.
Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
Installing SSRS 2012 in SharePoint Mode on SP2010
If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
Troubleshoot a Reporting Services Installation.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Reportings Services in a 2-Tier Architecture / (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key. )

Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!

Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

Distributed Software Systems & Serialization

Can someone please explain why the ability to be able to serialise an object and then de-serialise it, has such a vital role in the building of Java based distributed software systems.
Many thanks

Serialization allows you to create 'persistent objects' A serialised object can be written to a persistent store - such as a hard drive - and restored at a later stage.

Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Cluster

Hi,
Does DPM 2012 R2 still needs DataSourceGroups.xml and MaxAllowedParallelBackups key when using Hyper-V VSS Software Writer to backup Server 2012 R2 Hyper-V Cluster with CSV's? Can't find a clear answer somewhere.
Thanx for helping me out.
DJITS.

Configure CSV backups
If you are running Hyper-V on Windows Server 2008 R2 and you’re backing up multiple clusters with DPM, you need to ensure that only one backup uses the same CSV at any one time. To do this, follow the instructions in
Serialize virtual machine backups.
If you’re using software VSS with Hyper-V on Windows Server 2008 R2, do the following
Serialize virtual machine backups per node
Serialize virtual machine backups per CSV LUN
Have a nice day !!!

OSD Tasks only available to PXE and media showed up in Software Center on a server!

OK so I'm getting a selected windows 2008 r2 server setup with its SCCM client cert, I get the client installed on there - everything's looking great, I see updates and CI's and policies all coming down nicely watching the client logs... I open up software
center thinking I'll go on ahead and kick off the 2 available windows updates and to my horror I see my OSD Task Sequence deployments (Available) sitting there in software center. These are all set for visibility only to PXE and media - NEVER software center
- every single one of them - and I've triple-checked every one since I saw this and also verified they don't show up on a client workstation. I deleted the deployments for these task sequences and grabbed the \windows\ccm\logs directory in full off the server
for review... How in the flying heck did these task sequences show up in Software Center on my server's newly installed client / software center???

Aha! Thanks Mr Sandys! Sure enough the client hasn't upgraded yet and is at 5.00.7711.0000.
I have automatic sitewide client upgrade configured (within 1 day) - guess I'll wait to see if it updates or not. Shouldn't pushing the client from my CM server send the latest client X_X ?

Dental office management software cannot share between server and workstation

The wsetup files that are located in c:\softdent on the server are not visible on the workstation and the installation will not run until this is resolved.
The map drive (z: ) doesn’t show the files that are located on the server. The file that should be in z:\setup (folder called wsetupfiles ) does not exist but is live on the server.
The permissions on the server or WS are incorrect.
What can be done.

Hi,
Could you let us know what's the management software? Were your Server and client all Windows system?
If yes, what's the version of them?
Could you ping Server from client either via IP address or Server name?
This article could be used to troubleshoot:
Find PCs, devices, and content on your network
http://windows.microsoft.com/en-in/windows-8/find-pcs-devices-content-on-network
Karen Hu
TechNet Community Support

Can I use boot camp or other virtualization software with Snow Leopard Server?

Can I use boot camp or other virtualization software with Snow Leopard Server?

Boot Camp is not virtualization; it boots Windows natively on the Mac hardware. So Boot Camp would be irrelevant to running Snow Leopard Server. Parallels and VMWare Fusion both have at least "experimental" support for running Snow Leopard Server in a virtual machine on Mac OS X, though I don't know how robust it is as of this time. You might ask for opinions on the Parallels or VMWare forums.
Regards.

Does lion server support a single email address across multiple devices??

I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
How well will email and calendar entries sync across devices?

I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
I would ditch the exchange server move to Mac OS X Server, and never look back.
God Luck!
PS. All of your devices will be in sync all the time.
Shore answer:
Does lion server support a single email address across multiple devices??
Yes.

Mac mini server refuses to get DHCP address from router

Everything was going along fine. But after a power outage the server goes to a 169. address when the router puts out 198. addresses. If I put a static 198. address in it sees the network but won't connect to the internet. I've flashed the router (everything else sees the router fine, 3 computers and a time capsule). I've had the hardware checked at the Apple store - it picked up an address right away. After narrowing everything down the problem has to be in the operating system. I even did a full time machine restore to the day before the storm. No luck. Anyone heard of this problem.

Mauricette has a point.
A server function is not designed to accept a floating or dynamic IP address. If that is the case, how do you create firewall rules that prevent those unnnecessary ports being left opened from being attacked by rogue machines in Romania and China on a hourly basis when you announce to the world that your server is available if the server IP address keep changing due to the DHCP lease change? Yes, they do have bots that do this VERY EFFICIENTLY!
By changing the very nature of your firewall rules by working with DHCP, you are opening ports you do not know to accommodate DHCP dynamic addressing, which was the reason why your Mac Mini Server stopped working in the first place. It's ok for a client, since a client isn't serving any files to any one right.
By using client based firewall rules, you are exposing your server to attacks and when they get through your Mini server, which they can if they are persistent, they get into your home network and then whatever file server services you have opened and unprotected at the time WILL BE copied by these people easily.
I have a client once who did just that. She was attacked, the hacker went through her network like a rampaging bull. They were from China. My Synology RAID server gets this attack all the time, but I have a well establish IDS system and the Synology RAID has logs that tracks attacks.
For a server setup. Use static IP and then build a strong firewall around it and protect it and never compromise.
Recently, I just noticed someone somehow hacked and broke my WPA-PSK AES passkey for one of my Wireless N network router. It was not set up with a strong password though, but thankgod I had a firewall around that so my internal networks were safe. So this teaches you that if someone wants in bad, they will get in.
Hope this helps.

DHCP Server not giving out IP Address to APPLE iPhone

Hi, First off, I hope this is the correct forum....
A little background, I have a very nice 16GB 3G iPhone (from Apple of course). It has no problem connecting to my wireless access point (cisco 1240). I have an old windows server that I can turn on as a dhcp server and it gets an address back right away, however my mac server (10.5) will no give it an address and I do not understand why. Here is the log.....
Mar 16 19:06:37 macserver bootpd[37021]: server starting
Mar 16 19:06:37 macserver bootpd[37021]: server name macserver.schmittg.com
Mar 16 19:06:37 macserver bootpd[37021]: interface en0: ip 192.168.1.75 mask 255.255.255.0
Mar 16 19:06:37 macserver bootpd[37021]: interface en2: ip 10.211.55.2 mask 255.255.255.0
Mar 16 19:06:37 macserver bootpd[37021]: interface en3: ip 10.37.129.2 mask 255.255.255.0
Mar 16 19:06:49 macserver bootpd[37021]: DHCP DISCOVER [en0]: 1,0:21:e9:5:d3:de <iPhone-5>
Mar 16 19:06:49 macserver bootpd[37021]: service time 0.008083 seconds
Mar 16 19:08:11 macserver bootpd[37021]: DHCP DISCOVER [en0]: 1,0:21:e9:5:d3:de <iPhone-5>
Mar 16 19:08:11 macserver bootpd[37021]: service time 0.003807 seconds
Mar 16 19:08:12 macserver bootpd[37021]: DHCP DISCOVER [en0]: 1,0:21:e9:5:d3:de <iPhone-5>
Mar 16 19:08:12 macserver bootpd[37021]: service time 0.000683 seconds
Mar 16 19:08:13 macserver bootpd[37021]: DHCP REQUEST [en0]: 1,0:21:e9:5:d3:de <iPhone-5>
Mar 16 19:08:13 macserver bootpd[37021]: service time 0.001844 seconds
Mar 16 19:08:24 macserver bootpd[37021]: DHCP DISCOVER [en0]: 1,0:21:e9:5:d3:de <iPhone-5>
Mar 16 19:08:24 macserver bootpd[37021]: service time 0.000587 seconds
Mar 16 19:08:25 macserver bootpd[37021]: DHCP REQUEST [en0]: 1,0:21:e9:5:d3:de <iPhone-5>
Mar 16 19:08:25 macserver bootpd[37021]: service time 0.000409 seconds
Mar 16 19:08:27 macserver bootpd[37021]: DHCP DECLINE [en0]: 1,0:21:e9:5:d3:de
Mar 16 19:08:27 macserver bootpd[37021]: dhcpd: host 1,0:21:e9:5:d3:de declines IP 192.168.1.227 from server 192.168.1.1
Mar 16 19:08:27 macserver bootpd[37021]: service time 0.001994 seconds
What is wrong?
Thanks!

I am having a similar problem:
---------------- Client Request --------------------
op = BOOTREQUEST
htype = 1
flags = 0
hlen = 6
hops = 0
xid = 20714
secs = 27
ciaddr = 0.0.0.0
yiaddr = 0.0.0.0
siaddr = 0.0.0.0
giaddr = 0.0.0.0
chaddr = 0:4:13:2a:2f:ed
sname =
file =
options:
Options count is 9
dhcpmessagetype (uint8): REQUEST 0x3
maxdhcp_messagesize (uint16): 0x224
requestedipaddress (ip): 192.168.1.66
server_identifier (ip): 192.168.1.200
host_name (string): m3-0004132A2FED
parameterrequestlist (uint8_mult): {0x1, 0x3, 0x6, 0xf, 0x21, 0x42, 0xa0}
vendorclassidentifier (string): snom-m3-SIP/01.25//10-Mar-09 16:36
client_identifier (uint8_mult): {0x1, 0x0, 0x4, 0x13, 0x2a, 0x2f, 0xed}
end (none):
bootpd[3138]: DHCP REQUEST [en1]: 1,0:4:13:2a:2f:ed <m3-0004132A2FED>
SELECT
state=SELECT
Sending: DHCP ACK (size 300)
bootpd[3138]: replying to 192.168.1.66
=================== Server Reply =====================
op = BOOTREPLY
htype = 1
flags = 0
hlen = 6
hops = 0
xid = 20714
secs = 0
ciaddr = 0.0.0.0
yiaddr = 192.168.1.66
siaddr = 192.168.1.200
giaddr = 0.0.0.0
chaddr = 0:4:13:2a:2f:ed
sname = ryan-perrys-computer.local
file =
options:
Options count is 8
dhcpmessagetype (uint8): ACK 0x5
server_identifier (ip): 192.168.1.200
lease_time (uint32): 0xdec
subnet_mask (ip): 255.255.255.0
router (ip_mult): {192.168.1.1}
domainnameserver (ip_mult): {208.67.222.222, 208.67.220.220}
domain_name (string): wha
end (none):
bootpd[3138]: ACK sent <no hostname> 192.168.1.66 pktsize 300
bootpd[3138]: service time 0.001879 seconds
destination address 255.255.255.255
---------------- Client Request --------------------
op = BOOTREQUEST
htype = 1
flags = 0
hlen = 6
hops = 0
xid = 11587
secs = 27
ciaddr = 0.0.0.0
yiaddr = 0.0.0.0
siaddr = 0.0.0.0
giaddr = 0.0.0.0
chaddr = 0:4:13:2a:2f:ed
sname =
file =
options:
Options count is 4
dhcpmessagetype (uint8): DECLINE 0x4
server_identifier (ip): 192.168.1.200
requestedipaddress (ip): 192.168.1.66
end (none):
bootpd[3138]: DHCP DECLINE [en1]: 1,0:4:13:2a:2f:ed
bootpd[3138]: dhcpd: IP 192.168.1.66 declined by 1,0:4:13:2a:2f:ed
marking host 192.168.1.66 as declined
state=<none>
bootpd[3138]: service time 0.001143 seconds
destination address 255.255.255.255

How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
Thanks

Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts

Compass Server, Robots, Binding to IP address

Hello,
We're running iPlanet Compass server on top of iPlanet web server. We have been using the product for years now (back when it was called Catalog server). Anyway, we would really like the robot to bind to a specific IP address and use it when doing crawling.
For example, our machine may have a primary IP address of 1.2.3.4. However, using IP aliasing, we may also have an IP address of 1.2.3.5 on it (same subnet). We would like to have the robot use the IP alias address instead of the primary address when doing crawling.
Many servers allow for this ability (BIND and Postfix come to mind). This allows us to separate the 'service' from the server providing the service. If we need to move the service on to a different server, we simply migrate the IP address over to it the new server. The old server keeps its original IP address because it never had any connection to the service.
Does this capability exist for the robots? Please note that I am NOT referring to the web server portion; I understand that the web servers can be configured to bind to a specific IP address, and we do that with great success. However, the crawlers (robots) all seem to want to use the primary address of the machine.
I'm hoping there might be a setting in process.conf that we could add to enable this functionality.
Thanks for any pointers,
--Dave
Argonne National Laboratory

On other server (not problematic one) try;
netstat -ano
verify in the list if the ports 137, 138 and 139 are listed and listening or at least have
*.* in foreign column. If not make sure File and Printer Sharing
is bound to the connection.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Distributing software to DP's - server nbame is empty in address

Similar Messages

Maybe you are looking for