Distributing the content directly to Secondary Site

We have a particular application that is being used at a only one of our sites with has Secondary site.(SS1)
Now my question is when i distribute the content do i always first need to distribute it to the Primary Site (PS1)or can i skip distributing it to Primary and directly distribute to secondary site SS1.
We have 1 Primary Site & 4 Secondary Sites along with few additional DPs.

can you please help me to understand how should i distribute the content give below is the case:
Primary Site @ UK
Secondary Site (along with DP role) @ Australia
Location of content Network share in Australia.
Now the application that i want to distribute is only used in Australia.
So after creating the application in SCCM how should i distribute the content
A) Only to Secondary Site
B) To Primary Site First & then to Secondary site...
If i use "A" the status keep on showing waiting for content for days. But if i use "B" it works perfectly fine without any hiccups.

Similar Messages

Assign the exsiting clients to Secondary site

Hi Guys,
I need some directions to following issues.
We have SCCM 2012 SP1, managing clients in 2 different countries.
We have primary site in country A and secondary site in country B.
Under country A we have 2000 clients in various locations and in country B we have 5000 clients across various locations.
The link between country A and B is very limited (8MB) link. So recently the link getting smashed because of most of the clients from country B are assigned to Primary site in country A. Also we have SUP installed only on the primary server, which means all
the clients were getting the updates Catalog through WAN.
So we have installed secondary SUP in country B, however most of the clients from country B still getting the updates from primary SUP.
Now, what we are trying to achieve is;
First, assign all the clients in country B to secondary site.
Second, switch the country B clients from primary SUP to secondary SUP.
So to switch the clients to secondary site, under the boundary groups -> references ->Site Assignment we have chosen to assigned site to Secondary site.
Now,
1, how can we assign the clients to a secondary site? How long will it take to show up in the location log? It has been 24 hours and still the client machines location log showing the primary site MP details. Is there any way we can force
this process to speed up?
2, when we assign the existing clients from Primary site to secondary site, will it reassign SUP to secondary site as well? If No, how can we force the existing clients to communicate with secondary SUP?
I know, the SUP switch will only be possible when the primary SUP is not available and after x times of re-tries the client will fall back to the secondary SUP. In our scenario we cannot make our primary SUP offline, if we do this then all the clients from
country A will get the Catalog from secondary site, which will cause the network issues. So Apart from this, is there any other way (Resetting ANY client policies, uninstalling and re-instilling client, any other settings we can do to re-check the SUP) to
switch to secondary SUP?
Any help/ideas will be much appreciated.

Is the management point at the secondary site published to active directory? The clients will try to query AD to find their local Management Point.
Clients search for a Management Point by using the below options in the order specified:
Management point
Active Directory
Domain Services
DNS
WINS
http://systemcenter.learnmsexchange.com/system-center/system-center-2012/sccm-2012/8-management-points-in-sccm-2012
If you haven't published the MP to AD for the secondary site there is a chance the clients just don't see it. The MP is installed on the same server as the secondary site, correct? What hardware are you running this secondary site on (cpu and ram)?

How to Delete the content of an existing site and start from scratch

I choose the wrong template when i initially setup my bc hosting for a customer how do i change the template i choose in site options and select a different one . I need to delete everything and stat over. I tried deleting everything under the develop area but lost my module style sheets for the eCommerce package. please help. Im on the business catalyst platform

Hi Joey,
Good to see that we are not the only ones running into this problem.
Seems as there is no standard solution available.
We have developed our own process type which deletes the content of the Open Hub table.
Thanks,
Klaus

SCCM 2012 client bring the packge from sccm2007 secondary site?

Hi Team,
We are middle of Cm12 migration.
We have 1 primary server and 5 DP's in HQ. Also HQ client successfully migrated to CM12.
Problem is: When we are doing the migration one of the country office machines also migrated and it bring the package to HQ server. So netwotk slowness happen. In the country office we have sccm2007 secondary server available. It is possible can we do this
CM12 client communicate with local SCCM2007 secondary DP?
Thanks

More info:
Planning to Upgrade Configuration Manager 2007 Secondary Sites
http://technet.microsoft.com/en-us/library/gg712275.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Content NOT distributing to secondary sites

I've got one primary site and two secondary sites. I'm trying to push out a windows update to all my DP's and distribute them to my clients. The primary site works just fine and all clients got the update, but when I look at the deployment package
it just shows as "In Progress" for distributing the content out to the other DP's located at my secondary sites. Any idea where to look to see whats going on?
***EDIT***
When I look under the content status for it, the message says "Distribution manager instructed Scheduler and Sender to send package SP0000F to child site "Secondary Site"

Yes, when I log in to a client here at my primary site and look in Start > Run > gpedit.msc and go to Computer configuration > Administrative Tools > Windows Components > Windows Updates I can see where it says "Specify intranet Microsoft
update service location" and it shows my Primary Site server. However, if I go to that same spot on my clients at my secondary site (except for one client that is actually working correctly) it doesn't show anything in that field, it just says "Not
configured." Its almost like all my clients at my secondary site have no clue where to go for anything.
As for the WUAHandler.log it literally only has 7 entries and they are all the same, here is the entire log:
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 2:27:56 PM 4832 (0x12E0)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 2:31:38 PM 1352 (0x0548)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 3:47:28 PM 3648 (0x0E40)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 4:59:05 PM 2212 (0x08A4)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/28/2014 7:47:38 PM 924 (0x039C)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/29/2014 12:47:26 AM 3572 (0x0DF4)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
10/29/2014 5:47:35 AM 3328 (0x0D00)

Secondary Site Distribution Points content flow

We are implementing an environment that contains over 750 locations with distribution points. With the limitation of 250 DPs per site, we are going to have to put DPs under secondary sites.
In preparation for this configuration we would like to have a better understanding of how the content will flow to the lower level DPs (under secondary sites). We are aware that content
being sent to a dp on a secondary site server is compressed at the primary, sent to the secondary and uncompressed. Here are our questions:
1. Will the content for lower level DPs, under the secondary Site, receive its content directly from the primary site DP, or the Secondary Site DP?
2. Will the content for the lower level DPs be compressed, sent and uncompressed (from the primary or secondary)?
This information will help determine the network configuration we use to limit our WAN traffic.
I appreciate any insight into these questions you can provide.
Thanks.

Sorry, but can someone explain #1 more detail?
I have Secondary Site with multiple DPs.
If I distribute the content to only 1 DP at Secondary site (not pull DPs), will the content distribute to the Secondary Site server first, then to the DP? Does the content also available at the SS Server?
Does the data flow like: Primary Site -> Secondary Site -> DP ?

Content replication problem to secondary site

Hi,
I have a problem with SCCM 2012 R2 replicating packages to a new secondary site.
The new secondary site server was installed a week ago.
The SSS was added to a DP group that had 713 packages assigned to it.
Throttling is configured so I was expecting it to take a few days to replicate however a week later 180 of the packages are still in progress.
All of the outstanding packages have a status of "The content files for the package xxxxxx have not yet arrived from the source site CAS. Distribution Manager will try again later to distribute the content" and the last status
time is about when the SSS was added to the DP group.
The parent primary site server is not a DP however it must have all the packages because they have successfully distributed to DP's in the primary site.
The environment looks healthy with no alerting component or site status messages.
The distmgr, sender and spooler logs on the parent primary show no signs of re-trying the packages
It looks like the package distributions have been forgotten.
I went to the properties for one of the problem packages, and selected to re-distribute to the SSS. Activity started straight away in the primary servers logs and the package was successfully deployed.
So my question is how can I kickstart the system back into life for the paused 180 package deployments just to the SSS DP without going into every package in turn and selecting re-distribute.
I guess I could write a powershell script to do this but hopefully there is an easier option
Any ideas would be appreciated.
Thanks

Hi,
How about ContentLibraryExplorer.exe? You could have a look on the following blog.
http://anoopcnair.com/2013/12/18/configmgr-sccm-2012-r2-tool-contcontentlibraryexplorerent-library-explorer/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

2012 -- 2012 Migration: How to Reassign Distribution Points that Reside on Source Secondary Site Servers to the Target Site

Source hierarchy AAA is at 2012 R2 CU3 and contains a primary site and 14 secondary sites (A01 through A14). The 14 secondary site servers hold the following roles:
Site system
Management Point
State migration point
Site server
Site database server
Component server
Distribution Point
Target hierarchy BBB is also at 2012 R2 CU3 and contains only a primary site. The goal is to "downgrade" the severs at source secondary sites A01 through A14 to distribution points.
AAA was added as a source site. Data gathering was done. A migration job was created an run, and distribution points from the source hierarchy were shared to allow a phased migration of the clients.
We have reach the point where we are ready to reassign distribution points in sites A01 through A14 from AAA to BBB, but none of the shared distribution points are eligible for reassignment. We surmise that since the DP role is not the only role on
these servers (as you can see from the bullet list above), they are ineligible for reassignment. We are unable to remove most of the roles. In fact, the only 2 roles that can be removed are the DP role itself, and the State Migration
Point. If we delete the secondary site, it removes ALL roles...not leaving any behind...including the one we need...DP.
My question is 2-part:
Is our assumption correct? Must a DP role be the only one on the server for a DP to be eligible for reassignment?
Is there any way we can reassign these DPs instead of deleting everything and building them from scratch?
These secondary site servers are in branch offices and host a lot of distributed packages. It would be very inconvenient to have to rebuild the DPs from scratch and redistribute all those packages over the WAN.

Full Disclosure: I have never used this tool myself. I intend to, however the opportunity or time to do so has not yet arisen.
You could use the techniques outlined in CloneDP (https://gallery.technet.microsoft.com/scriptcenter/CloneDP-for-SCCM-2012-SP1-825ce5b1) to create prestage media on each DP and rebuild. That at least would prevent redistributing over the WAN
Ken provides a nice writeup too: http://blogs.technet.com/b/kensmith/archive/2013/08/01/migrating-the-content-library-between-distribution-points-in-sccm-2012-sp1.aspx

Secondary Site Pull DP option??

I am currently looking into Pull DPs and have the below environment setup
1 PR1
2 secondary sites
Remote DP under each secondary site.
Can I setup one my secondaries to pull from another secondary site? For example Primary sits in Houston and 1 Secondary site in Leatherhead (main network hub). We have another big site that will require a secondary site for example Sweden. Can I setup Sweden
Secondary to pull content from Leatherhead secondary site instead of going back to Houston?
I dont see the Pull DP option on my secondary site colocated DP. The tab is not there.
Also whats the difference between Pull DPs and content routing with File Replication?
Hope I am making sense and not blabbing on:)
Thanks

I concur with Torsten. Ultimately, you are confusing yourself.
A pull DP absolutely can be set up to Pull content from any other DP within it own site; however, a DP on a site *server* cannot be a pull DP -- that would make no sense whatsoever since normal DPs get their content from the site *server*. Thus, the DP on
the site *server* already has direct access to the site's content.
So, you have two options, the one pointed out by Torsten (secondary site chaining) or not making the Swedish site a secondary and just using a PullDP there.
Is there a specific reason you are making it a secondary site in the first place? I know you said "big", but what does that mean? Also, it's not just about the number of clients at the site, it's about the network topology and the available bandwidth.
Jason | http://blog.configmgrftw.com

Uninstall and Reinstall Secondary Site Management Point Role

Dear Brothers,
I have an issue with one of my SCCM 2012 Sp1 with CU3 Secondary Site Server which the client failed to install on the actual server due to a client issue observed in the CCMSetup.log.
Observation Regarding the issue:
Issue Detail No1.
SCCM Client is not installing to my Secondary Site Server with site code (XYZ), after all the site server are also clients in SCCM hierarchy so it self needs SCCM Client as well.
CCMSetup.log:
"Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint" when you try to install the client agent in Configuration Manager"
According to http://support.microsoft.com/kb/2905359
the solution is to :
1. Uninstall the management point role.
2. Reinstall the client agent on the management point computer.
3. Reinstall the management point role.
Issue Detail No 2.
When I am trying to uninstall the Management Point Role via SCCM Console as part of the solution posted on the above KB Article, unfortunately the delete or uninstall option is been greyed out.
Now a lot of discussion on the topic "Can not remove management point role is greyed out "under this thread
http://social.technet.microsoft.com/Forums/en-US/1a039893-4a65-4dc9-9feb-e6f09ea1fc0b/can-not-remove-management-point-remove-role-is-greyd-out?forum=configmanagerdeployment
However on the last comment of the above thread from"Trana010"
stated a tool or a command
C:\program files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:(sec server name) SMSMP
0
Which I never tried yet, and also cannot find a reliable KB supporting the command "rolesetup.exe".
Questions:
1. What is the best way to uninstall/Reinstall the management point on secondary site considering the above issue details?
2. Should I installed CU4 directly instead? Maybe it will resolved the issue even though it is not related to the current case
Regards,

Well, it's by design that you can't remove a management point on a secondary site, so I can imagine that that's why there is nothing "official" written on that subject. I think there are three things you can do:
Try to run the command line (which is probably unsupported)
Submit a CSS call
Upgrade to CU4 and assume the problem is gone.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Dear Peter,
I end up shooting a case with CSS, he guided me and share that this issue is very common.
The reason is that it requires CU3 upgrade (Configmgr2012ac-sp1-kb2882125-x64.msp) to be installed with the SCCM Client installation (The same time) via command line in an elevated permission.
Follow the solution provided by Microsoft Support:
CCMSetup.exe /forceinstall SMSSITECODE=XYZ CCMENABLELOGGING=TRUE CCMLOGLEVEL=0 PATCH=C:\Configmgr2012ac-sp1-kb2882125-x64.msp
It seems the Client Push provided by SCCM 2012 Sp1 Infra, that includes your Hotfix under the "Hotfix" folder under the client source folder somehow doesn't work with this issue, that's why the work around is to help the ccmsetup to grab the Hotfix with
by providing the path for the hotfix instead of relying to take the hotfix for the hotfix folder.
Overall peter thanks for your suggestion. And also to Mr. Jason Sandys opening the option for an R2 upgrade, I will look into the KB for this to plan for implementation.
Regards,

SCEP definitions do not update on Secondary site server

Issue: Win 2008R2 server - Secondary site server - SCEP is installed, but it cannot find/download/install any virus definitions. When attempting to hit "update" within the SCEP console, it returns no results. When attempting to
check online for Win Updates via control panel, no virus def updates are found (but 11 different updates are found for .NET and other things).
The error that is thrown in the Windows Updates log when attempting to update through the SCEP console is Error: 0x80248014. http://support.microsoft.com/kb/2832355/en-us Although this
applies to Windows 8, I still checked the settings per the article. My settings check out okay.
No error is thrown when attempting to check for updates via Windows Update in the control panel. It finds 11 available updates (none of which are SCEP related), and displays them properly.
This server has the CCM2012 client installed, and the Anti-Malware policy has been successfully applied. We have a separate Anti-Malware policy that is applied only to our SCCM site servers. The policy indicates that all virus defs are to be
obtained from Microsoft online Update. Our primary site server does not display this problem. It is updating automatically with no issues.
It is possible to manually download and apply the latest virus definitions by visiting the MS virus defs site and running the manual update installer. I have only done this to ensure that the virus defs are somewhat current.
Steps taken: I have removed SCEP and re-installed it. I have also attempted the Windows Update "Fix-it" found here.
http://support.microsoft.com/kb/971058
Error 0x80248014 persists when attempting an update through the SCEP console, and no SCEP related updates are found by Microsoft online Update.
Any suggestions on what I might try next?

Thank you for the reply.
Well, the issue with this secondary site server isn't 100% fixed, but your line of questions pushed me in a direction that allowed me to put a Band-Aid on it. That said, it is updating the virus defs - although not exactly as it should be. But,
this is good enough for me now.
To answer some of your questions that seem relevant. This is a fairly new SCCM setup. Our implementation of SCCM currently is not configured to handle any Software Updates yet. We still rely on a separate WSUS server in our environment for all
WinUpdates (including SCEP/FEP). With that in mind, the Anti-Malware policy that is applied to both SCCM servers use the following 2 locations in order for obtaining SCEP updates:
1) MS online Updates 2)WSUS
As mentioned previously, the secondary site never detected updates via SCEP console or WinUpdates via Control Panel. But this did not explain why it could not retrieve from WSUS.
A quick look at our WSUS setup shows that auto-approval is configured for all of our workstations, but not our servers. I corrected this within WSUS - Forced GPUpdate on the site server - ran wuauclt /detectnow on the site server - Now, the virus defs
were found and could be installed. (I'll have to wait a little while to see if it continues to update automatically as it should)
So, as I mentioned above - the big problem of not updating at all is corrected, however the issue still remains "why are no updates found from MS Updates online?"
At this point - I don't know, but as long as it updates in some fashion, I'm good with that.

SCCM 2012 Secondary Site Migration

we have to migrate more then 50 Secondary Site to SCCM 2012 Secondary Site. Since we have to low-bandwidth connection for the remote site we prefer to go with SCCM 2012 Secondary site inside of DP.
I know we can migrate SCCM 2007 Secondary to SCCM 2012 DP and SCCM 2007 DP to SCCM 2012 DP.
But is there a way i can move the distribution point package from SCCM 2007 Secondary to SCCM 2012 Secondary Site?
when i try to migrate migrate SCCM 2007 Secondary Site DP to SCCM Secondary Site 2012, it uninstall the 2007 Secondary site and upgrade the DP to SCCM 2012 under the 2012 Secondary site.
But my requirement is to move the old SCCM 2007 secondary site package to SCCM 2012 Secondary site DP, is there any tool to manage this activity?
or what is the best practice to do this migration.

Hi,
You could use prestage content in SCCM 2012 to send packages to remote DP.
Configuration Manager 2012: Content Prestaging and Remote Content Distribution
http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM Console on Secondary Site 2012 R2

Hi all,
I just want to ask whether it is supported or not when install SCCM Console on Secondary Site Server in 2012 R2? I've searched over internet but does not find a conclusion about that.
From technet SCCM Console requirement and interoperability, there is no information that restrict install console from Secondary Site Server, but this link say it is not supported:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/7c31b2d6-130c-46d6-b24d-108110cb0b61/install-sccm-admin-console-on-secondary-site-servers-failed-on-one-of-two-server?forum=configmgradminconsole
Has anyone try this, because today i installed console from one of my secondary site server and successfully connected with the primary site. Hope that does not break anything because with the ability of RBAC in 2012 R2, i can assign the admin at branch
site permission he need to manage the clients in this secondary site.
Thanks,

I've seen it working with multiple customer. Also, I can imagine that it wouldn't be a supported scenario, purely because it's not tested (both new installations as upgrades).
As, I'm not working for Microsoft and it's not documented, I can't give you any official statements.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Secondary site Client Communication for SUP

Hi,
We have an SCCM 2012 Setup and here is the design CAS-->Primary-->Secondary site servers.
SUP is configured for Secondary site too. Boundaries are defined with IP Address Range and is proper.
Some clients are comminicating to Secondary site for updates. Downloading successfully and installing the software.
But some of the clients are communicating to primary site for updates and retain with the status "Downloading update"
I have checked the locationservices.log and it is fluctuating between Primary and secondary MP.
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
I have also checed "DataTransferService.log" and found more errors.
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 5576 (0x15C8)
DTSJob {141CB5AE-8EF2-464D-8D8C-68B868EE7F7B} in state 'DownloadingManifest'. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Failed to send request to /SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4 at host xxxxxxxx.xxxxxxx.com, error 0x2efe DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
[CCMHTTP] ERROR: URL=https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4, Port=443, Options=192, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:0DA907D5-1709-4B10-B627-61E289FD7149";
DateTime = "20130405062159.643000+000";
HostName = "xxxxxxxx.xxxxxxx.com";
HRESULT = "0x80072efe";
ProcessID = 4260;
StatusCode = 600;
ThreadID = 4200;
DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Successfully sent location services HTTPS failure message. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error sending DAV request. HTTP code 600, status '' DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP('https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4') failed with code 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
my query is how some of the clients are communicating primary site server for updates even though the boundary details are properly configured and Secondary site is configured with sup. Also need to know (as per the log "DataTransferService.log")how
come the clients are communicating SSL port for updates. Plz help in resolving the issue.

Hi Kent,
Thanks for the reply.
Primary and secondary sites are connected over WAN and we have around 2000 clients which are reporting to Secondary site.
Considering the WAN bandwidth utiliztaion and number of clients on secondary site we have configured the SUP role.
Not all the clients are with the above error message around 40%-50% of the clients are with above stated error message.
Plz let me know what is the error message indicates and do we need to reffer any other logs for indepth analysis.
Locationservices.log is with fluctuating connectivity
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
how come the clients are communicating SSL port for updates. Plz help in resolving the issue.

SharePoint 2010 Content from top level site hidden from search results on subsite.

Hi Everyone,
The issue I am having is that when a group of people are in there site, we'll call it site B, and they hit the search function, they only get results from site B and subsites of site B, but nothing from the top level site, site A. does anyone know of anyway
to get results from site A when searching in site B? This would really help me out a lot.
Thanks!
Best regards, Mike

Hi Mike,
According to your description, my understanding is that you want to display the content in top level site in search results page when doing search in subsites.
By default, the search scope is set to This Site in all sites, so the search scope in subsites is limited to the subsites.
I recommend to create a Search Center and then edit the Search settings in the top level site settings, please refer to the image below:
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Distributing the content directly to Secondary Site

Similar Messages

Maybe you are looking for