Distributing Workspace Services and Application

Hi All,
We are attempting to distribute the Workspace services and the workspace application on 2 linux servers. The application was deployed successfully and the services installed successfully on the separate boxes. Configuration was successful on both boxes as well except for registration with Shared Services. If anyone has any information on how to point the workspace services to Shared Services on a separate box it would be an enormous help.
Server 1
Shared Services
Workspace app
Server 2
Workspace services
BI services
Thank you!!!

Any information anyone has to share about installing workspace services (core services) and configuring them would be extremely helpful.

Similar Messages

One of cloud doesn't work in failover with Event ID 1205 and 1069 and unable to move services and application another node

Any one please respond.
I've been working on creating a windows server 2008 R2 cluster for about a month now and I keep getting an error whenever I try to add a 2nd node. I keep
getting The cluster node is not reachable. However, when I validate the configuration, everything goes through success. I created and destroyed the cluster a couple of times, but no luck. I even re-installed Windows Server 2008 R2 on both servers, re-configured
the iSCSI, and the same warning keeps coming up.
I installed a new a new SQL Server 2008R2 Named Instance on an exisiting SQL Server cluster node (Node 1 &Node2). When I try to manually fail
over
the Services and applications to another node (Node1 to node2) using Failover Cluster Manager, I get the errors
The cluster has these Events:
Event ID
1069: Cluster resource 'IP Address xx.xx.xx.xx' in clustered service or application 'ClusterDtc' failed.
Event ID 1205:The Cluster service failed to bring clustered service or application 'ClusterDtc' completely online
or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application..
Why the cloud server doesn’t move to node2? you can see screen shorts below.
1.
in system configuration-
3. in
system configuration---->warning--->Validate All Drivers Signed
after creating cluster I got below errors.
Any info you might know would be really helpful.

Dear Ravikumar
From clone support they given reply mail...
mail from Ramu...
That would be a typical work around in this situation. But what we intend to do cannot be accomplished through this work around as we need the validations to complete successfully.
We are looking for an option either to get the driver signed or use a different signed adapter for the same. Could you please suggest us something on that line.
Mail from Support....
Hello,
Unfortunately this is not something that we would be able to do in a virtual environment; You are welcome to try different drivers however we would not be able to provide any support
for untrusted drivers. The only true solution would be to upgrade from a VM to a dedicated server where you would have control of all the drivers as there is no virtualization layer to
contend with. Stepping into the territory of untested drivers for a custom configuration in a virtual environment will certainly prove to be an uphill battle.
I would advise contacting Microsoft's support for additional assistance as they will be able to provide the most accurate information regarding this concern.
Regards
Systems Administrator

In cluster Manager there are no services and application listed on a node.. what does this mean?

In Cluster Manager I can see two nodes listed.
When I click on the first it lists the two SQL Server instances.
On the other node there are no services and application listed....what does this mean?
Mr Shaw

Yes Instance A and Instance B will also be installed in the second node.
Just go to configuration manager in the other node, you will see those instances in stopped state.
Assume I install Instance A in a 2 node cluster with node A and Node B, it installs instanceA binaries in both nodes, What it does when failover is shutdown Instance A in Node A, move the disks to node B and start the instance A in the node B. Its basically
the same instance.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
Oh I get you..
The missing bit on the puzzle is that the binaries are installed on both nodes at the same time.
Thanks,
Ben
Mr Shaw

Change "Services and applications" names in failover cluster manager

Hi. Id like to change "Services and applications" names in failover cluster manager for Windows Server 2008 R2.
I right click on one and press rename, but when i change the name and press enter i get the message "To rename this service or application please rename the Client Access Point via its property page"
It's important that we don't change the network name for the service

Hi,
Checkout this blog post
PowerShell for Failover Clustering: Let’s Rename a Few Things
But keep in mind if you rename the resources and you are using them in a script or backup you need to check this also with the new name.
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

"Services and Applications" is missing from the Failover cluster manager menu

Hi,
I am not sure this is the right group for my question, but I couldn't find anything else more suitable.
In my Hyper-V installation (Windows 2012 Data Center), I am missing "Services and Applications". I am using Windows 8 to manage the cluster and I need this menu to import an existing VM into the cluster. How can I get this option or is there a
software that I need to install?
Thanks

Repost here: http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/threads
in the Hyper-V forum. You'll get a lot more help there.
This forum is for Virtual Server 2005.

Business Objects, external services and application services in CAs

Hi All,
right now we are developing our first eSOA Composite Application with CE and I have some questions regarding Business Objects, the import of external services and the development of application services.
As I understood there are two ways to provide business functionality for composite applications:
a. Import backend functionality as an external service (e.g. BAPI, RFC) at the CAF, build the application service which can be used as a callable object for UIs or the GPs
b. Develop a local Business Object (in CAF) providing the business logic, create the application service which again can be used as a callable object. Furthermore the application service can be exposed as a Web Service (external service).
My questions:
1. When is it appropriate to to import external services in stead of developing local BOs?
2. Under what conditions is it advisable to (solely) develop local BOs?
3. What are the advantages / disadvantages regarding the reusability of the services (in option a and b)?
Note: We are developing on NetWeaver 2004s.
Please let me know, if you need more information to answer the questions!
Thanks for your advice in advance,
Regards,
Ivonne

Hi Ivonne,
first of all, the CAF Business Objects (BOs) itself don't contain any business logic, they're basically just local database tables (with some CRUD services on top).
Business logic is implemented in Application Services (AS).
Now, regarding local BO's vs. external services, it depends on your use case. If the data is already available somewhere in your backend system it makes sense to use external services. For instance you wouldn't want to store business partners all over different composites. For data that is specific to your composite (in particular configuration, customizing etc.) and not likely to be reused by other applications you should use local BOs.
Accessing local BO's is also much faster than calling external services.
You can do reuse in both scenarios, since the CAF services can be exposed as web services.
Regards,
Christian
Edited by: Christian Loos on Apr 8, 2008 6:11 PM

Web services and Application Integration in Netweaver

I want to create Web services in Netweaver.
Just something simple to begin with. But I need to be able to:
Create the service
Call the service
Register the service [UDDI], and
Expose the service the service using WSDL.
And explain the whole thing in my research paper.
Does the SAP Web AS 6.40 tutorial cover all this??
Maybe the following book would be more useful.
What do you think??
"Web Programming with the SAP Web Application Server"
by Frederic Heinemann, Christian Rau
(Hardcover - August 2003)
I would also like to Integrate 2 applications with different databases, does the SAP Web AS 6.40 tutorial cover this as well??
When will it be possible for a company to buy mySAP (NetWeaver 04)and be able to use Netweaver to create
e.g. a Portal system?
Thanks for your time.
Regards
Sean

Sean,
Certainly you can do this in NetWeaver. Here's where to start: http://help.sap.com/saphelp_nw04/helpdata/en/d6/f9bc3d52f39d33e10000000a11405a/content.htm
Try out the SDN downloads of Dev Studio with Web AS and EP6 with WebAS. The portal lets you show off the services yuou build quite easily. Dev studio lets you build them.
Nick

Setting Users for my managed services and application pools

I setup my SharePoint 2013 test environment and I developed an intranet site. Now inside my test environment I set all the application pool & managed services to use Farm user account for simplicity. Now I want to setup my UAT environment and I want
to follow the best practice for managing users and service accounts.
I have read the “Core Solutions Of MS SharePoint 2013” book, and it have listed the following table:-
First question. What is the difference when saying that the user “Must be a member of the Farm Administrators group” Or must be “Domain user account”?
Second question , when I first install SharePoint 2013 a lot of applications pools and managed services such as excel services , access services, Performance Point Service Application, business
data connectivity and Machine Translation Service will be automatically created , so which account they will be using and should I define separate accounts for each managed service ?
Third question. What is the recommendation for SharePoint 2013 regarding service accounts?, to use separate account for each manage service, for example one user for excel services , second user
for access services ,etc?
Fourth question. For example the documentation mentioned that the Required roles for the excel services is “Domain user account.”, but what permissions this domain user need to have ?
thanks for any help, and sorry so adding multiple questions inside the same post.

Q #1: This means the user must be part of the Farm Admins group. Every user is a Domain User.
Q #2: Generally those should be using a single Domain User account in a single Application Pool to minimize memory usage and reduce unnecessary complexity.
Q #3: The less Application Pools the better. E.g. One account/App Pool for all Web Applications, one account/App Pool for all Service Applications, and then Central Administration is obviously separate.
Q #4: You don't need to specifically give this type of user any sort of rights
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Lumia services and application problem

Dear sir,
I am using nokia phones from last 10 years. I have lumia 820. Before lumia i have nokia n8 which is too good. Problem with lumia series is as under
Not enough applications like flash transfer, prper Maps, file manager and many more.
Size of the appilication is too big compare to android.
Application only save in phone memory not in SD card big problem.
Not have hdmi support which should be available in these kind of phones.
We can not tranfer selected contacts from lumia to other phone via bluooth.
Some time hidden services access processor and battery.
There are others
Sir, if you lounch new series than old facility of the phone should be there and have some extra. After N series lumia can not gain big market because of these kind of limitation.
Please do needful in these matter.

lumiaproblem wrote:
If you launch new series than old facility of the phone should be there …
Instinctively, you are right. However, Nokia was never able to do that. When they introduced Symbian/S60, Series 40 was much more mature in many regards. When they introduced Maemo, Symbian was much more mature in many regards – and now with Windows Phone it is not even the fault of Nokia anymore. There you go …

Cisco SAMI (Cisco Service and Application Module for IP) modules

Hi,
Could anyone confirm whether Cisco SAMI module on 7600 supports traditional ppp over vpdn wholesale broadband?
Currently we have setup on Cisco 7200's and we want to upgrade the hardware to 7600 to scale better, MWAM module supports the VPDN configuration but its now end of sale and replacement product is SAMI whose literature is quite confusing.
Thanks
Hitesh

Try this link for more information on cards
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_white_paper0900aecd801f92c1.shtml

Entity Services and Web Dynpro

Hi,
I want to implement a Web Dynpro with relation to a database (Entity Service and Application Services modeled with NWDS).
I used the following tutorial
, but when I want to add a "Used model", the selection list is empty and so its not possible to do that.
Why is it empty, I implemented exactly after the tutorial?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8b7059da-0c01-0010-e09c-9ecabaf58864">Example Tutorial (Page 16)</a>
I really need help for that, because I want to implement a Info Callable Object, which shows Entries from the tables. The table should be filled within the actions, and so I need a relation to entity level.
Thanks in advance
Steve

Hi Steve,
In order to search the SDN forums effectively I suggest to:
- Select 'Forums' (top menu bar)
- Select topic of interest (in this case 'SAP NetWeaver > Developing Composites with CAF')
- Enter your search keywords not in the upper left but in the upper middle search box 'Forum Search'
This way the search is more likely to meet your expectations.
Regards,
Axel

Shared services and workspace architecture(How we can find out req &respon)

Good morning Hyperion folks,
Does any body have any document or PDF about workspace and shared service architecture...How these both components are communicate each other..any idea or any document..while communicating of these if anything goes wrong,,where we need to check, what is exactly the problem (any suggestible logs)...
Company are doing big mistake by using this hyperion tool ..These guys are not supporting and even they don't know much about the tool apart Product dev team..and that too they are not disclosure any documents related product...
**Does anybody found any kind performance tunning guide or lab guide about workspace and shared service HFM,Planning...** I have never seen component wise documents and tunning guide and recommendations.
I am strong opnion about hyperion is,we would not get any support from oracle and documents so He can migrate Cognos TM1 and Finance management etc........
Edited by: 888154 on 29/09/2011 02:55

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

How to enable Kerberos - Shared Services and Workspace

Hi All
I'm trying to enable Kerberos SPNEGO with WebSphere 6.1.0.31. I've protected the urls.....and i can see the handshake happening in the trace logs.....
Shared Services SSO is working fine if i use the option of Get Remote user info from http header.....
But workspace doesn't seem to accept any of the options given $REMOTE_USER$, $HTTP_USER$.
Can some please let me know how to do this....? Or is there a way to change the header information?

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

Single Sign On and Application with Web Services

My Application Server is set as partner application for SSO so for example this address: http://myserver:80 is SSO enabled.
I have two ADF applications on it with jspx pages and the ADF security is enabled on them. SSO works for these applications (for jspx files).
I added a new application with a web service and deployed this new application. It is on the same application server as those two applications and its security provider in identity management, SSO enabled. Its address is something like:
http://myserver:80/newWebService-Project1-context-root/MyWebService1SoapHttpPort
So I expect to be unable to test web service, but I can and I am not prompted for user name and password.
Regards
Farbod

Thank you.
Yes I had cleared the cache and in these cases I always use a new browser also.
I deployed a third application without declarative security options (ADF application, no security settings) and this application also didn't ask me for user information though it was under SSO.
Regards
Farbod

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Distributing Workspace Services and Application

Similar Messages

Maybe you are looking for