Distribution appears dead!

Does anyone know what the error message "Distribution appears dead!" means?
I have several distributions applied to several servers. They are set to
refresh hourly. All of them worked perfectly at one time, but now each
distribution is returning this error message for some, but never the same
servers.
For example:
Distribution 1 (inventory policy) reports the error on servers a,b, and c.
Distribution 2 (file distribution) reports the error on servers d, e, and
f.
Distribution 3 (file distribution) returns the error on servers g, h, and
i.
I've checked the KB, but found no reference to this error message.
Thank you for your assistance.
-David Lange

David,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • VIXIA HF200 appears dead

    VIXIA HF200 appeared to be charging as charge light was blinking. Tried camcorder but would not work. Now, when on mains, Camcorder appears dead. No charge light. Battery probably empty does not power on camcorder. The charger, with battery removed, does not power on camcorder. Please, let me know what, if anything, can be done. I am searcing to find documents from purchase to check whether camcorder is under warranty. Many thanks

    Hi Geosav,
    For assistance with this, please contact our Technical Support Department, including the information you've provided here.  For contact options, please click here.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • IPhone appears dead

    My phone appears dead. There is no activity on the screen. Nothing happens when I hold down the power and home buttons. There is no response to being charged by my computer or outlet. I took the SIM card out and put it back in. Still no activity. Is there a way to get the phone working again? Any ideas?
    Thanks.

    Connect it to the wall charger for 30 minutes. Remove, then hold the HOME and SLEEP buttons for at least 10 seconds. An Apple logo should appear and the phone should reboot.
    If it doesn't the battery may be bad, the cable may be bad, the charger may be bad, or the phone may be bad. So eliminate the ones you can; try a different cable and different charger. If it's still dead take it to an Apple store (make an appointment first) or toss it and get an iPhone 4.

  • Hello. I have downloaded ps cc in the Norwegian version. I then deleted the Norwegian Verson and will re installPerfect ps cc english verson. When I try to download ps cc again I do not get pressure on ps cc in creative clode distributions appear as updat

    I have downloaded ps cc in the Norwegian version. I then deleted the Norwegian Verson and will re installPerfect ps cc english verson. When I try to download ps cc again I do not get pressure on ps cc in creative clode distributions appear as updated What can I installation alert ps cc again ?

    That is not a practically empty xinitrc - that file only needs one line: exec WM.  Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
    Is slim involved?  Probably.  That is the source of many problems.  But to start narrowing this down, I have 3 suggestions:
    1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
    2) at a tty in runlevel 3 use "xinit" instead of "startx".  Startx is fine most of the time, but it is essentially just a complex wrapper for xinit.  That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult.  So for now just use a vanilla 'xinit'.
    3) remove dbus-launch from your exec line in xinitrc.  This is done by console-kit so it is redundant and potentially problematic.  Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them.  Just make that line "exec openbox-session"
    Edit: adding one more:
    4) temporarily switch out openbox-session for openbox.  I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
    Last edited by Trilby (2012-10-03 17:30:36)

  • 2950 appears dead System Light Flashing stat light stays on

    I think I have a dead switch. However, I figured I would see if anyones had a similar situation. When I power the device up the stat light comes on and stays on. Then the port lights flash once then the system light starts flashing. Once the system light starts fashing the switch appears to hang. It's not responding from the console port. The other switch is I have is a 2950 as well and it's responds via the terminal emulation settings I've set up. I think I know the answer, but I'm indulging in a little wishful thinking. Lastly I hold down the mode button for 15 to 30 sec and I dont get any change in status. Should I feed this switch to my garbage can?

    If the console port does not respond, there is not a whole lot you could do. If you have a service contract, open a TAC service request and get it replaced.

  • Next step? iPod appears dead

    Last night, while I was listening to the iPod (fifth generation 60GB), it stopped midsong (I was charging it at the time). After I tried to toggle back to a directory and then to shut it down, it brought up the sad icon and the prompt to the apple.com/support/iPod link.
    I've tried recharging with no change of status. I've also tried to connect it with my iBook but iTunes won't come up and it won't connect (a first for me).
    I've got a feeling it's dead, but before I send it in for restoring (and wiping out 5,800+ songs), I thought I'd check to see whether anyone else has any other suggestions? (I have most of the music on CD, so I can reprogram, but before I go to that step, I thought I'd see if there's anything else less drastic I can try.)
    Thanks.
    iBook G4   Mac OS X (10.4)  

    Sounds like you might have to restore it, but you can do that yourself. Backup your library before you do restore it, that way you wont have to go back and burn all the cd's over again and it will save you a LOT of time. The link below is how to restore your iPod. Good luck.
    http://docs.info.apple.com/article.html?artnum=60983

  • Headphone jack appears dead, how to know for sure?

    hi, i've done the obvious and really don't want to order a new system board this newer imac 20' with a dead headphone out jack. was working and now not. its hardware related i think as i booted up on another OS install on an external and same goes there. it just acts like it does not see the jack when inserted, ie. speakers continue to play. thx for any suggestions!
    coocoo

    Apple cared it.

  • Nano appears dead 3rd gen

    was playing fine then screen went blank. I have tried the 5 wotsnames, have plugged it into the PC...nothing other than an error message ....usb device not recognised. I have also plugged it into a seperate power source..but still dead..Is there anything else I can do ?

    Whoa! Fixed! I just saw another related thread and I got mine to work again. Try pushing the center and menu buttons simultaneously for about 10 seconds (this time I used a finger on each button, straight down). Worked for me. Good luck.

  • Shuffle appears dead

    My shuffle stopped working today.
    It was fully charged last night and filled with music.
    I plug it in to my car stereo on my way to work and then hook up the headphones for the walk from the car park. On the way home, when hooked up to the car stereo through AUX port, the music stopped right in the middle of a song for no apparent reason. Total play time today was just over an hour.
    Since then no lights, not recognised in iTunes and unable to reset.
    Any suggestions on what could be wrong or how to fix before I decide it is really dead and send it off the the recycler.

    take it to an apple store or where you bought it because if the USB broke on it they won't work.

  • Z22 Appears Dead

    My Z22 stopped working.  I did not have any warning that anything was going wrong, but one day recently I tried to  turn it on and nothing happened - blank screen.    I tried recharging it (using a charger I had used several times in my car's lighter), but there was no sign of any life.  Left it plugged in for several hours.  Still nothing.  What could be wrong?  Dead rechargeable battery?  If so, how can I get a new one?  Have I lost all my data anyway?
    I had many important phone numbers and addresses which I need and, unfortunately, I did not have back-up.
    Am I out of commision or is there still a chance to salvage something.
    Thanks for your  help!
    Carlteamd            
    Post relates to: Palm Z22

    The Z22 should not lose any data while it is powered off.
    Try this procedure to see if you can wake up the Z22.  With the power supply plugged in, press the reset button on the back of the handheld several times in a row to see if the handheld will power on. If that does not work, plug in the Z22 to the AC power supply and let it charge overnight and then try the reset button procedure again.
    If you get the Z22 to power on, I would suggest you sync to the PC to backup your data.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Nano appears dead

    I have a second generation Nano. I have only had it for 3 months and I went to play it in my car and it went completely dead, or so it seems. I had it fully charged before plugging it in, and now the screen is black. I tried plugging it into my computer and there is no change. It is not recognized by iTunes or the computer. I have also tried resetting it and there is no change. Any solution to my problem?
    Second generation Nano   Windows XP  

    Wow! I can't wait to see what that looks like. I was just at the Apple store and they only have the 3rd generation Nano for sale
    Let's first figure out what iPod you have. Go here:
    http://www.apple.com/support/ipod/five_rs/
    And pick the one that looks most like yours. Also, under settings, click on about and tell us how much memory it has.
    Then, let's make sure you went through all the proper steps for trying to unstick an iPod. Click on the one that looks like yours, and do everything in order.
    Let us know...

  • IPhoe4 appears dead after plugging into laptop

    After I plugged my iPhone4 to my laptop (XP), it did not start charging. The screen looks dead and I cannot power on/off. However when I call my number from another line, it rings! I have been using my iPhone to charge from laptop, wall socket for 3 months now.
    Before I plugged into the laptop, the charge on the ipHone was showing at 49% - so there is some bit of battery still left in there.

    First plug your mini on an USB-Power adapter NO PC!!
    Than normally it will start, load the mini's battery for a while.
    Than instal the latest version of itunes on your pc.
    Open itunes than plug your mini in...
    And it normally shows up.. Restore and done!
    When it doesn't work the mini has a wrong format! That happens when you restored it on a mac!!!
    Maybe you've done that. Than plug it into a mac open Disc-Utility than change the format to FAT.
    Than again in your windows and will it work...
    Ask again when it won't or you does'nt understand
    Greets Thom

  • Iphone freezing/appearing dead

    When pressing the lock button...or once it locks automatically, my iphone screen goes black and responds to NOTHING. The only way to see the screen again is to plug in the charger...but once the phone locks again, the whole process is repeated. This means I have no working phone (which is also needed for my work) and no ipod etc etc. I would really appreciate an answer since I can't even see how to remove the sim card to put it in an old, functional phone.
    Thanks.

    penders,
    When the iPhone goes into sleep mode, the only way to wake it up is to push the Home button on the front, or the Sleep/Wake button on the top. If neither of those options are waking the phone, you may want to try some basic troubleshooting steps:
    Try resetting your iPhone. To reset the iPhone, press and hold the Sleep/Wake button and the Home button at the same time until you see the Apple logo.
    If that doesn't work, then try to reset all settings. To reset settings, Tap Settings > General > Reset > Reset All Settings. Note: This will reset all settings. No data or media will be deleted.
    If that still doesn't work, you can try restoring the iPhone using iTunes. To restore, connect the iPhone to your computer. When it appears in the Source list, click on Restore in the Summary tab. Note: This will delete all media and data. All settings will be reset as well. If possible, sync iPhone with iTunes before restoring to back up your most recent settings.
    Hope this helps,
    Jennifer B.

  • Distribution Link Dead

    I received an adobe reader 11 distribution license, but the link is a 404 error for the .exe file. 
    Can someone help me?
    Thanks

    Use http://get.adobe.com/reader/enterprise/

  • IBook Appears 'Dead"

    Hi All,
    I've an iBook 800MHz G3 14.1 dual USB, about 2002.
    It won't start up. I haven't used it in a over a month and when I turned it on yesterday with mains connected it took several attempts start up. I got to the login screen, logged on, the desktop appeared and all seemed normal. I opened Safari then all of a sudden I got random horizontal lines across the screen. OMG!. The whole machine froze. I had to hold down the power button to shut it down. I once again had difficulty restarting and when it finally did the screen misbehaved at the login sceen. I left the iBook to charge for an hour and attempted to start it agin. Same things happened. When I left it last night it was showing 4 lights on the battery. Tonight (24hrs later) and the last battery light is flashing continously. I have reset the PMU (I think) but am unsure about how to reset the PRAM (so many different iBook models). I'm hoping either of these might cure my problem.
    Has anyone encountered the same symptoms - better still has anyone a solution.
    Thanks,
    Seán.

    Thanks for your helpful suggestions QTMacGrl. I tried both and still no luck, unfortunately. The only difference is that I now hear the startup sound - so obviuosly the PRAM has been succesfully reset.
    When I restart the HD spins up as 'sounds' normal but I've nothing on the display. I'm thinking now that the graphics card is faulty, or more probably the ribbon cable that runs through the hinge is damaged in some way. I've attempted to start from my OS X Tiger DVD and the screen works then but if I move the screen the horizontal lines appear as it is moved - hence my thinking with possible damage to the ribbon cable.
    I think the first think to is to connect the iBook to my PowerBook via ethernet or AirPort to see if the iBook is working as normal which, if it is, will condemn the display and then I'm into opening the iBook up - not a prospect I relish but if it has to be done then I'll do it!
    If anyone has any further suggestions then I'd be glad to hear them.
    Cheers,
    Seán.

Maybe you are looking for