Distribution channel in org model
Hi Gurus,
I assighned Ditribution channel 10 as attribute in Sales org,Sales off,Sales group.and for determination i used region and country,Based on region and country the Organizational unit is getting determined in the quotation correctly,But i am unable to get the values of sales org & Distribution channel automatically.
Can u please help on this
Regards
Narayana
Message was edited by:
manam narayana
Thanks shalini,
I have done that yesterday and it is working fine,The problem is because when i press F4 in attributes for divisions in org model,i am not getting two digits as i done in SPRO.i am getting first one digit in division and the other digit and describtion is coming in describtion,so i forced the division with 2 digits,and my problem is solved
The quostion is why i am getting one digit in F4 of division,For distribution channel it is fine .and when i didnt enter the division as attributes in org model,the determination of sales org and distribution channel is not taking in the order,only the responsible org unit is taking in order.
Is that division important to be given in attrbutes of org model for determination of sales org and distribution channel.
Please give me some clarification
Regards
Narayana
Message was edited by:
manam narayana
Similar Messages
-
Can't add distribution channel in org. model.
Dear all.
I had define distribution channel in SPRO->cust->CRM->Master Data -> Organizational managment-> Organizational Data for sales scenario->Define distribution channels
After that i'm trying to add it in field Dist. channel in attribute tab of my sales org. But there are no any new distr channel in area of selection. How can i fix it?
Regards,
ELHii EL
Goto sm30 -> T77OMATTR
Click on maintain .
Select Sales -> goto Attributes/Scenarios tab on left hand side -> Check the status of Attribute D_CHANNEL. If it is checked as invisible then deselect it and then check the attributres in your org unit.
Regards
Shafali -
Which table contain the sales org/distribution channel details for an PO
Hi Experts,
Do you know from which table could i get the sales org/distribution channel details for an Purchase order.
The Purchase order is an UB document type. STO
Then there will be delivery order created for this STO.
I heard there are 2 kinds of Sales org/distribution channel in one Purchase order? One is Vendor, another is local...?Is this correct understanding?
Please let me know which table field could i find those info from an Purchase order document?
Or the questions could be:
Assumed we have replenishment delivery#, then how to get corresponding Purchase order#(UB, STO), and further how to get the sales org info?
Please kindly advise from table fields points of view...
How to get the PFrom an replenishment delivery#
Thanks.Dear Hoo Laa,
You may find the Sales Organisation/Distribution Channel details in PO itself (Shipping Tab). Table where you can get Sales Organisation/Disribution Channel is EKPV.
Regards
Samier Danish -
BAPI to get customers filtered by sales org and distribution channel
Hi there,
I'm writing a little portal web-app on an MS platform to allow externals to place orders directly. I have a problem that I need to get a list of customers (for ship-to) that is filtered by the same sales org and dist chan as my sold-to company and BAPI_CUSTOMER_GETLIST doesn't return this info for filtering. What options do I have?
Many thanks,
AshleyHello,
Create custom RFC function module.
Use table KNVV to get your customer list based on sales org. & distribution channel.
Regards,
Sameer -
Table to link Sales Org , mat, Plant, storagr loc,distribution channel
Hi Frnds,
Can any one suggest table which is having all the fields Sales Org , mat, Plant, storagr loc,distribution channel.
thanks,
Y.Ravi KumarHi,
Check these tables
vbak, "Sales Document: Header Data
tfacs, "Factory calendar (display)
vbpa, "Sales Document: Partner
lips, "SD doc: Delivery: Item data
mkpf, "Header: Material Document
mseg, "Document Segment: Material
konv. "Conditions (Trans Data)
Regards,
Prashant -
Urgent, Restricting Sales org & Distribution Channel
I'm having two users and one is from US and other MEXICO
If user from US LOG'S into SAP ,He should only his Sales org(US01) & Distribution Channel(001) & Mexico User log ,then he should be able to see only his Sales org(ME01).
My Question is there a way where we can restrict US / MEX Through Security , if not Can we restrict through abap if so Please send me some details , Which table /code .
any inputs will be appreciated ,Hi
One way is as below.
DATA: BEGIN OF lt_tvko OCCURS 0,
vkorg TYPE vkorg,
bukrs TYPE bukrs,
END OF lt_tvko.
SELECT vkorg bukrs FROM tvko INTO TABLE lt_tvko
WHERE vkorg IN lr_vkorg.
IF sy-subrc NE 0.
MESSAGE e085(wv).
ENDIF.
* Check all retrieved co.codes
SORT lt_tvko BY bukrs.
DELETE ADJACENT DUPLICATES FROM lt_tvko COMPARING bukrs.
LOOP AT lt_tvko.
* Error Message: No authorization for sales organization &1
PERFORM f_bukrs_auth_chk_p USING lt_tvko-bukrs 'ICC_FI_CN' 'E' '010'
lt_tvko-vkorg '' '' ''.
ENDLOOP.
FORM f_bukrs_auth_chk_p USING value(lc_bukrs) TYPE bukrs
value(lc_msgid) LIKE sy-msgid
value(lc_msgty) LIKE sy-msgty
value(ln_msgno) LIKE sy-msgno
value(lc_msgv1)
value(lc_msgv2)
value(lc_msgv3)
value(lc_msgv4).
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
ID 'BUKRS' FIELD lc_bukrs
ID 'ACTVT' FIELD '03'.
IF sy-subrc NE 0.
MESSAGE ID lc_msgid TYPE lc_msgty NUMBER ln_msgno
WITH lc_msgv1 lc_msgv2 lc_msgv3 lc_msgv4.
ENDIF.
ENDFORM. "f_bukrs_auth_chk_p
Select the sales organization mapping to Company code and then restrict.
Hope this can help you.
Kind Regards
Eswar -
HR ALE org model distribution - multiple business partners created
Hi,
I am experiencing weird problems with HR ALE org model distribution to CRM 7.01. It creates multiple business partners for some org units and some persons. However, it does not create them everyone. Right now it seems like a new business partner is created on every second destribution in update mode. Does anyone have an idea what might be wrong? In my understanding no new business partners should be created, rather the existing ones should be recognized and updated.
There is just one IDoc warning saying there was an error calling function module BUPR_EMPLO_ADDR_ADD because parameter value IV_X_SAVE has changed. This warning apperas everytime, also when no new business partner is created. Thus I am not sure if this is important. Also I do not use any custom coding, so I don't think that I am causing this warning.
Thanks a lot
AP
Edited by: linex83 on Mar 26, 2010 10:45 AM
Edited by: linex83 on Mar 26, 2010 10:46 AMI just discovered a part of the problem. In CRM the relationship between the organisation unit and its business partner gets deleted if it already exists. On next update a new business partner is created, because there is no business partner assigned to the organisation unit yet.
It would be interesting to know why the relationship is deleted. Also I am not sure that it happens to all organisation units. Furthermore the same problem exists for persons. -
Sharing Distribution channel among 2 Sale org
Hi Gurus,
I wish to verify if the following is correct:
1. Within a Company code, the sales organization 1 can use distribution channel DC 2 of sales organization 2.
Likewise for Div.
Thanks.
regards
M RussoThere are four kind of Relations in SAP
1 - One to Many
2 - Many to One
3 - Many to Many
4 - One to One
for Sales Org to DC is Many to Many
means one sales org can have Many DC
and One DC can be assigned to Many Sales. Org
one sales org can have more than one distribution channel. One distribution channel can have more than one Sal Org.
Another Example
One Company code can have Many Plants
this is One to Many Relations.
Please refer following links for further details : --
http://sapfunctional.com/SD/EnterpriseStructureConfiguration.htm
http://my.safaribooksonline.com/book/operating-systems-and-server-administration/sap/9780470404737/enterprise-structure/configuring_a_division#X2ludGVybmFsX0ZsYXNoUmVhZGVyP3htbGlkPTk3ODA0NzA0MDQ3MzcvNDE=
Regards/Rajesh
Edited by: Rajesh Kumar Bhansali on Feb 14, 2011 10:31 AM -
Is it possible to use distribution channel to define my CRM org structure?
hi,
Is it possible to use distribution channel to define my CRM org structure?
Regards,
babuHI babu,
uIn this scenorio first u can create distribution channel according to client requirement and in the same way u can assign to u r orgstructure
Thnaks®ards
kishore kumar -
Referenced sales org. AA00 and distribution channel do not exist
Hiii Driends,
I have came across a problem while Assigning Sales area to Sales doc type.....
Steps i have followed:
1. Created and assigned all Enterprise Structure
2. Set up Sales area (AA00/A1/A0)
3. IMG-SD-Sales-Sales Doc -Header-Assign Sale Area to Sales Doc type-Combine Sales Organisation. This is done succesfully.
But while doing 'Combine Distribution Channel' when I enter Ref Dist Chnl as A1, Error is appearing as "Referenced sales org. AA00 and distribution channel do not exist"
Can u sugest me any solution???
Regards,
AbhiHi Abhi,
If the referenced distribution channel is not assigned to the sales org of sales line which you are trying to refer....Message will be coming as you said...
Please check whether you are referencing a distribution channel which you have assigned to your sales organization or not...
Hope this helps you...
Reward points.
Regards
Guru -
Relation between Sales org + distribution Channel + Division.
Hello all,
I have a requirement where I need to make an entry for sales data for a BP . On the Selection we have sales Org , Distribution channel and division. can any body tell me how check if the combination of entries made for the S.org , Channel and division are correct .
I tried using the FM CRM_BUPA_SALES_AREA_GET_ALL. but this doesn't show all the entries .
Thanks in advance
srinivasAny Suggestions ?
Thanks ,
Shounak M. -
Remove Sales Org & Distribution Channel assigned in Material Master
Hi,
Is it possible to remove Sales Org & Distribution Channel assigned in Material Master. This is a newly created material I looked at MM06 to see if this assignment can be removed without setting the material for deletion. Any suggestions welcome.
Thanks.the only way to get rit of existing data is to set a deletion indicator and subsequently run archiving.
In your case go to MM06, enter material number, sales org and distribution channel and set then the deletion indicator at this level only.
Then go to SARA object MM_MATNR and run archiving.
Archiving is usually a process, not just a sequence of transactions. Archiving requires customizing, and certainly the most recent OSS notes for the archiving object (this can be extremly many if your hotpackage implementation was long ago).
this is especially needed to archive only certain organisation levels, as this functionality came with OSS notes -
Sales Org/Distribution Channel to Plant Assignment
Hello All,
I am assigning a sales org/distribution channel to a plant, but an error message says that "Organizational data for inter-company billing missing in plant CN30". Can anybody tell me what this means and how to correct it?
Thanks and regards,
OlynHi Olyn,
I think there may be something missing in your customising - please
see the relevant parts of note 109254 attached - in particular points
7 + 8 relating to transaction OMGN.
Kind regards,
Zsuzsanna -
Finding sales Org, Distribution Channel
Hi Forum,
If i have plant and material how could i find its corresponding sales organization and Distribution channel.give field and table name.
Thanks
Lovleen
Edited by: lovleen sol on Jan 8, 2008 11:14 AMHi,
Check these table:
MARA: General Material Data
MARC: Plant Data for Material
MARD: Storage Location Data for Material
MARM: Units of Measure for Material
MVKE: Sales Data for Material
MBEW: Material Valuation
Base Unit u will get from table MARA and for others units check MARM.
Rewards points if helpful,
Regards,
Srinivas Ch -
Get plant from sales org and distribution channel
Hi expert,
how to get default delivery plant from sales organization and distribution
channel.
thanks,
neothanks for your quick reply,
i saw table tvkov which has field vkorg,vtweg
but in tvko i found vkorg only .
i don't get vtweg in tvko table,
can u tell me which two condition i need to use ofr join,
one is vkorg and the other one (?) i don't get it.
thanks,
neo
Maybe you are looking for
-
Office 2013 professional plus clieck-to-run /packager mode appv pacakge
Hi! I want to make appv package for office 2013 professional. I dont want to use preview. I want to use full version for makingappv package. I know we cant use sequencer to make .appv package for office 2013. I am using this http://www.microsoft.com/
-
Help! Video plays fine in organizer, shows up red in sceneline
Hi there -- I'm new to premiere elements 8 and I'm trying to include a video clip in a sceneline. It's an .MP4 file from a digital still camera that also shoots video (a sony cybershot). When I look at the video clip in elements organizer, it shows u
-
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my
-
Contact 'screenshot' in my iPhone photos...?
I noticed that a 'screenshot' (literally) of one of my contacts has been placed in my iPhone camera folder, as I now have it in iPhoto within all the recent iPhone photo imports... Has this happened to anyone else? How did it happen - and can I ensur
-
Unable to render 7 x 7 pixel movie in AE CS5
When I try to render a 7 x 7 pixel movie in CS5 the final result is a 16 x 16 pixel movie. Comp settings are 7 x 7 square pixels. Render Setting is Best and Output Module is Lossless. Both Crop & Resize in Output Module Settings are unchecked but O