Distribution channel ( tax problem )

Dear Gurus ,
I created distribution channel with reference to standard SAP distribution channel "01" .
Beacuse of this , In tax classification , "DE" and tax category MWST is appearing by default at the time creation of customer master and material master .
i also check it is not assign to tax determination rule for country india . I want to remove that tax classification .
Kindly pls suggest corrective action for this .
further I can't delete distribution channel now this stage .
Thanks & rgds
Anchal Pawat

Well anchal,
Sorry..i was bit wrong..here are the details
The system displays the countries provided in the customer master based on "the plant assignment (plant country)
for the distribution channel and sorg (transaction OVX6)."
so check what are the plants that u have assigned to ur Sorg and DC....countries of those plant will be shown in customer master
The system displays the countries provided in the material
master based on "the plant assignment (plant country)
for the distribution channel and sorg (transaction OVX6)."
so check what are the plants that u have assigned to ur Sorg and DC...countries of those plant will be shown in material master
Let me know whether this resolves
Regards
Jagdish

Similar Messages

Multiple distribution channels in one shop application possible?

Dear all,
maybe someone can support me with the following requirement:
I have one shop application (SAP CRM ISA 4.0) that shall be used for selling sales products (distribution channel 10) as well as service products (distribution channel 20) at parallel.
The shop is based on one catalog. In this catalog I have two catalog variants - one for each distribution channel.
Problem:
A service product (distribution channel 20) is never released for the sales channel (distribution channel 10).
When having more than one catalog variant the user has to select a certain catalog/catalog variant when logging onto the shop application. By selecting a certain variant only materials can be purchased that are released for the distribution channel defined in the selected catalog variant (same is valid for TREX search).
=> Does anyone know if it is possible to set up a process to sell products of different distribution channels in one shop application out of one product catalog without releasing a material for both distribution channels?
Thanks a lot for you help.
Best Regards,
Rainer Gryschka

You can do this by specifiying the appropriate data load rule to be used by ERPi within Integration Option 1 in the location. This will kick off the data load rule you specify in ERPi that should be tied to the corresponding set of books in EBS.

SD Tax problem

Hi SAP Guys,
There are two sales areas. 1030/10/10( Canada). and another is 1031/10/10( US). The Customer is (1031\10\10 )created for sales area 1031\10\10. I have created customer for 1031/10/10 and after that delivery and PGI created. The problem is While I am processing next step(Billing) it is coming that tax is not determined. And while I am cancelling PGI the system is not accepting to cancel PGI. Now what is the solution.
Can we extend customer 1031/10/10 to other sales area 1030/10/10. If it is possible where we can extend? What is the solution?
Regards,
Venkat

Dear Venkat,
Yes you can extend one Mater data for another sales area through Common distribution Channel and common division.
Suppose you created master data in sales area 1030/10/10 and want to extend to 1031/10/10. Go to
IMG > Sales & Distribution > Master data > Define common distribution channel
Here select the Sales Org 1031 and Dis. channel 10, enter the 10 in DCh-Cust/Mt field. Also if you want the system to refer the same price for material as you maintained in first sales area, just enter the 10 in the DCh-Conds field.
same thing you can do for division.
This is the process where you can extend the Master Data (Customer / Material) to another sales area.
I think it is helpful to you. If you need any further clarificatin, feel free to contact me.
Have a nice day,
AT

Show different distribution channels in one line

Hello everybody,
I have the following reporting problem: My customer wants to see an an attribute to 0Mat_sales summarized in one line despite the different distribution channels. With other words there is one material where two different distribution channels have the same value in this attribute. Any chance to show this in one line summarized in the query?
Thx in advance,
Karsten.

This is not a support forum for the psexec utility.
Try posting here:
http://forum.sysinternals.com/pstools_forum8.html
-- Bill Stewart [Bill_Stewart]

BAPI to get customers filtered by sales org and distribution channel

Hi there,
I'm writing a little portal web-app on an MS platform to allow externals to place orders directly. I have a problem that I need to get a list of customers (for ship-to) that is filtered by the same sales org and dist chan as my sold-to company and BAPI_CUSTOMER_GETLIST doesn't return this info for filtering. What options do I have?
Many thanks,
Ashley

Hello,
Create custom RFC function module.
Use table KNVV to get your customer list based on sales org. & distribution channel.
Regards,
Sameer

CMIR Common Distribution Channel

Hi
I have a few distribution channels e.g.
10
20
30
I have a few divisions e.g.
01
02
03
Now suppose I make 10 as the common distribution channel.
My Sales area are defined as
1000/10/01
1000/20/02
1000/30/03
I create a customer master with the following details:
Customer number : 1234
Sales Area : 1000/10/02
It allows me to create the customer and extend it to sales are 1000/10/02
Now I create an order with customer number 1234
The sales are which gets determined automatically is
1000/20/02
Reason for picking up 20 as the distribution channel is because division 02 is only associated with Distribution channel 20.
Now the main problem comes while creating the CMIR ( Customer Material Info Record )
If I try to create a record for customer 1234 using sales are 1000/10, I get the following error
Combination of sales org 1000 and distribution channel 10 is not defined
What should I do in this case.
The purpose of Common distribution channel failed in this case?

hi Mona
Do common distribution channels and common division. in spro
go to VOR1---Make entries with
Sales org--Distribution channel
10000010
10001010
and go to VOR2
1000-00-01
1000-01--01
Make these settings and do again the process.
If any quries get back to me..
Regards
Srinivas.

Common distributions channels

Hi everybody:
I want to use the functionality of common distributions channels only for the creation of customer's master data.
I want to preserve the update of sales area to the materials master data because the same material in the same company code could have different Acct assignment group and Output Tax depends on the sales zone.
But if I have many sales area when I have the same customer in many sales zone and in this case the data never changes only I need one sales area to maintain.
Can I customize only the common distribution channel applies only for the creation customers master data?
I really appreciate the help.
Susana

Hi Susana,
I don't think this is possisble with customizing :(.
And I don't think there is an 'easy' solution for it neither
1) Either go for an automated creation / change of the customer master data to the 'non-maintained' sales areas
( maybe you can setup something with ALE and link back to your own system and only override the distribution channel when creating the customer in the 'remote' system )
2) If it's only necessary for certain pricing / tax operations to use the material master data for the original sales area ( rather then the common sales area ) , it's probably possible to use userexits to overule the default values found by SAP for the commoen sales area and replace them with your own : e.g. userexit 'userexit_move_field_to_vbap' in mv45afzz
can be used to retrieve your own vbap data
regards
Dirk

Distribution channels deviate from each other.70 /or 10 (reference), Message no. V2011

I have a problem when create the "Credit memo request" doc. type CR, reference doc. is billing doc. and my sales doc. that i did the billing doc. sales area is 2100/10/71 and i have to create cr doc with reference to billing doc. and sales area should be 2100/70/99 but while i creating cr doc. with reference to billing doc. system gives error distribution channel deviate from each other 70./or 10 (reference).
I have seen the early post but there where no proper solution on it.
please provide me solution i have to create cr doc. with reference to billing doc. and simply meaning with different distribution channel and division from preceding doc.
Thanks
Regards,
Abhijeet

Hi man,
The thing is that the credit memo with reference is precisely affect the balance of the Customer - Sales Area, imagine a Report by Sales Area saying the total Sales Amount of the Sales Area is 1 million, but then you turn to another sales area and discover that the same customers have credit notes for 1.5 million, insane. The purpose of referencing the credit/debit memos is that, not to lose track, including Sales Areas. Otherwise make no sense to create it with reference, just create a Credit Memo with the customer you want to affect in the sales area you want to affect, no reference. For audit purposes justify the document based on REASON FIELDS and approvals, let me explain this a little more:
One single person CANNOT create Credit Memos, cos this could lead to wrong ethical behavior, to avoid this some companies recommend to have more than one person involved in the process of Credit notes creation, what I've done on this situation is: provide access to one person to CREATE Credit/Debit memos using the standard transaction VA01, in the settings of the Sales Order Type I customize that the document will be created automatically blocked for billing (can use a UserExt to always have this field populated on the creation). This person WONT have access to modify Credit/Debit notes (VA02) but his supervisor will and this supervisor is responsible to approve and modify the blocking field to release the doc for billing. Yes, he can also change the amount but you will already have the log of changes in place for audit purposes.
This is more than a technical issue, a process issue. My kind suggestion is to challenge the business and get clearly why they want to have a referenced Credit Memo without using the Sales Area of the based Billing Doc.
Hope it helps...
Saludos!
Ricardo

Reg fbl5n sales orgnization wise & distribution channel wise balence

hi
we are using ECC 6.
our SD persons required sales organization wise& distribution channel wise balence in FBL5N.
the total list is available. sales organization wise and distribution wise not available.
how i can solve the problem
regards
sambasivarao ch

Hi
Either you can generate based on the number range / Reconciliation Account through dynamic selection (if the account group for customer codes is defined at distribution channel level logic).
Otherwise, you are required to use any one of the following fields in the customer master creation :-
Industry / Search Term /Accounting Clerk etc. with a identification of the required combination.
Hope this will meet your requirement
Regards
Anilkumar

Referenced sales org. AA00 and distribution channel do not exist

Hiii Driends,
I have came across a problem while Assigning Sales area to Sales doc type.....
Steps i have followed:
1. Created and assigned all Enterprise Structure
2. Set up Sales area (AA00/A1/A0)
3. IMG-SD-Sales-Sales Doc -Header-Assign Sale Area to Sales Doc type-Combine Sales Organisation. This is done succesfully.
But while doing 'Combine Distribution Channel' when I enter Ref Dist Chnl as A1, Error is appearing as "Referenced sales org. AA00 and distribution channel do not exist"
Can u sugest me any solution???
Regards,
Abhi

Hi Abhi,
If the referenced distribution channel is not assigned to the sales org of sales line which you are trying to refer....Message will be coming as you said...
Please check whether you are referencing a distribution channel which you have assigned to your sales organization or not...
Hope this helps you...
Reward points.
Regards
Guru

Distribution channel in PO

Dear Gurus
have created Vendor ABC and Customer with same name as ABC.
I have created Material A for that I am maintianing Distribution channel as 24
I am creating Return PO ,In that PO i want the Shipping Tab to be displayed bcoz i want to create delivery through SD
But the shipping tab is not getting displayed
But if i extend the Material for Distribution Channel 10
then for Return PO the shipping tab gets displayed
Can anybody suggest me why the shipping tab is getting displayed for distribution channel 10 and not 24 ??
What could be the possible setting so that in shipping tab i can be able to see both the distribution channel
Waiting for reply
Regds
shailesh

Hi Jürgen L.
Thankz a lot ,My problem got solved,well i am held up with one more problem ,will be thankful to you if you can throw light on this:
Our client is going to start Export oriented unit and we are mapping the system as per the reuirement
Well i m in maharashtra in india and as per the govt rules and regulation for EoU ,we can purchase the material without payment of duty from the vendor, against CT3 form,
But when the goods(rejected) moves out from clients premises the one who has purchase the goods(i.e after GRN),we have to pay the excise duty through PLA and only the duty has to be recovered from the vendor.
What can be the procedure for this scenario.........
Will be very thankful if you can guide me on this
regds
shailesh
[email protected]

Distribution channel in org model

Hi Gurus,
        I assighned Ditribution channel 10 as attribute in Sales org,Sales off,Sales group.and for determination i used region and country,Based on region and country the Organizational unit is getting determined in the quotation correctly,But i am unable to get the values of sales org & Distribution channel automatically.
Can u please help on this
Regards
Narayana
Message was edited by:
        manam narayana

Thanks shalini,
         I have done that yesterday and it is working fine,The problem is because when i press F4 in attributes for divisions in org model,i am not getting two digits as i done in SPRO.i am getting first one digit in division and the other digit and describtion is coming in describtion,so i forced the division with 2 digits,and my problem is solved
The quostion is why i am getting one digit in F4 of division,For distribution channel it is fine .and when i didnt enter the division as attributes in org model,the determination of sales org and distribution channel is not taking in the order,only the responsible org unit is taking in order.
Is that division important to be given in attrbutes of org model for determination of sales org and distribution channel.
Please give me some clarification
Regards
Narayana
Message was edited by:
        manam narayana

Products & distribution channel

Dear sir.
Now, I want to manage cost and revenue, profit of each line of products, and each distribution channel.
How can I setup these products and distribution channels ?
Thanhks,
Hangvt

Hi Rohit
Did you check FUNCTION field does it maintained as "COMPARE" of the customizing object(DNL_CUST_S_AREA) in Trans.R3AC3 ,if it is so just remove the COMPARE from function field.
OR
copy DNL_CUST_S_AREA and maintained as ZDNL_CUST_S_AREA and do the same what i mentioned in the above.and run the initial load by using R3AS.
hope this will solve your problem
please get back to me if your not solve this issue
Regards
RAO

Common distribution channel in SD

Hi All,
I got a product from sap ECC to CRM with sales area org1, dis(disribution channel)1, div1
dis1 is common ditribution channel for 2, 3, 4, 5 in ECC SD.
but when am trying to create order in crm with that material in distibution channel 2,
getting error that it is not maintianed in dis2.
and in crm product sales area am able to see only org1, dis1, div1 as sales area.
how to avoid this problem.
please any clues.
Thanks,
Priya

I am looking for the common distribution channel function in CRM but I cannot find it. It is working fine in SD ECC.
I need to replicated it to CRM from ECC. Would you let me know how to fix it?

Value-added tax problem about free goods!

Hi All,
I've got a value-added tax problem.....
Can anyone can come out with a solution.
Here is the Business Scenario....
One product company offen give some free goods to its customer company for test or probation. In pricing, the free goods have no income so that the value-added tax is zero, but by the law, the product company must pay the VAT(value-added tax) base on the cost of the free goods.
How to implement this in SD R/3 Scenario...
Can any one of you suggest me a solution for this plz..
Regards,
wang-yuzhen.

Hi,
You need to bring in a consition type "VPRS" in your pricing procedure. The VAT will be determined based on this condition type. VPRS is a statistical condition type. That means eventhough it appears with a value it will potentially not be displayed in your invoice. The invoice value will be 0 and there will be no account posting for this condition type

Distribution channel ( tax problem )

Similar Messages

Maybe you are looking for