Distribution Link Dead

I received an adobe reader 11 distribution license, but the link is a 404 error for the .exe file.
Can someone help me?
Thanks

Use http://get.adobe.com/reader/enterprise/

Similar Messages

Distribution appears dead!

Does anyone know what the error message "Distribution appears dead!" means?
I have several distributions applied to several servers. They are set to
refresh hourly. All of them worked perfectly at one time, but now each
distribution is returning this error message for some, but never the same
servers.
For example:
Distribution 1 (inventory policy) reports the error on servers a,b, and c.
Distribution 2 (file distribution) reports the error on servers d, e, and
f.
Distribution 3 (file distribution) returns the error on servers g, h, and
i.
I've checked the KB, but found no reference to this error message.
Thank you for your assistance.
-David Lange

David,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Distribution link problem

I have a distribution link problem.
I have created the form that have been distributed among several people. Before today, everyone had a fine access to the form through the link, but now for some reason link won't open.
If anyone knows what is the issue, please let me know
Thanks in advance

The services is now restored, our investigation is ongoing to clear the underlying issue
Again, we apologies for any inconvenience this may have caused.

CS3 Download Links Dead

Hi,
I need to re-install CS3 on my Mac, and I have the discs and the serial, but I'm on a new Mac without a CD drive, so I need to download the software, but the download link at the link below are dead. PLEASE ASSIST!!
http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

This worked for me:
1) Goto the link to download your product. COPY the link to a text program somewhere. For example, for Photoshop CS3:http://esd.adobe.com/Applications/Photoshop/CS3/Mac/ADBEPHSPCS3_WWE.dmg.
2) Now click the link, in an attempt to download.
3) When you get the error message, paste the link you copied into the URL but DON'T hit enter or navigate to it yet.
4) Change the link to the Trials2 url. For example: http://trials2.adobe.com/dlm/Applications/Photoshop/Mac/ADBEPHSPCS3_WWE.dmg
You are essentially changing the "esd" to "trials2" and adding "/dlm" before "Applications". This worked for me!
I could not go to the link directly, and if I paused the download and restarted, it said I didn't have permission. It appears to have to goto the error message screen FIRST, then paste in the modified download link and you should be good to go!
Incidentally, this file appears to be the same file linked to from:
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Document Distribution Link to MS Outlook

Hi All,
I have a client using document distribution. The actual document distribution seems to be working fine when messages are sent to the SAP Inbox. However when the messages are forwarded to MS outlook - the links to confirm receipt change to text files.
We are trying to achieve a link from MS Outlook that will enable the user to log into SAP from the email message.
Any ideas what to change?
Thanks, Neil
Edited by: Neil Mclaren on Jul 27, 2010 10:42 AM

Hi,
can you redescribe the following for me:
This happens when you have missed out on defining the Communication/Distribution Type for e-mail. This can achieved as follows:
DIR > Document > Document Distribution > Recipient > User Maintainence > Choose the communication method as INT (e-mail without URL) or HTP (e-mail without URL) and provide the remaining details > Save.
Where can I find the above path/menu: DIR->Document.......
Thanks

DDK Links dead for PCI-6133/6143 / Searching docs and examples

Hello,
On the following page
http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument&lang=en&node=seminar_US
the links for the RLP examples and documentation of the 6133/6143 PCI-Card seem to be dead.
Can anybody post these please?
Thanks,
Thomas Fleischmann

Thanks. The links are good now.
-Alan A.

Image with link functions in Firefox, half of the image/link is active in Chrome, image/link dead in Safari

I have a page with 2 nav links originating from 2 different images. 1 image / link works well with Firefox, Chrome and Safari. The other image / link works well with firefox, only half of the image is active in Chrome and none of the image is active in safari. The documents links checkout fine. I have replaced the image, the container as well as relinked. The result is the same. Can someone help please? Here is a link to my site (in progress) PikiPiks: film reviews Only the first 2 images in the left column are currently linked. The first image / link for "Kiki's Delivery Service" is the problematic one. Thanks! MacOS 10.9 / Dreamweaver CS6

Fix the code errors.
Validation Results - W3C Markup Validator
I won't even talk about the liberal usage of absolute positioning -- none of which is needed. You'll soon learn that this is not the way to build web pages when this comes back to bite you in the butt. It almost looks like this layout was created in another program. Was it?
#1 On the web file names cannot contain special characters like apostrophes. <a href="Kiki'sDeliveryService.html"> is not a valid file name. You need to rename without the apostrophe.
#2 This link is pointing to a file on your local hard drive which nobody except you can see.
<a href="file:///CARBUNKLE/Users/jev/Sites/WowAbout/index.html"> That path should be pointing to your site.
Nancy O.

Unclickable links / dead urls in Mail drafts

Before a recent software update, all links in the preview window of my drafts were clickable. Now they are not. Once drafts are sent, the links become clickable in the sent folder, both in preview and the actual message window. Also, links seem clickable in all other folders.

You should be able to add interaction on data list just from FC, you require no other software. Just come into the normal state of the application, select the list item, choose "Add Interaction" in Interactions panel. Here you may choose any action like "Play Actions sequence/Play transition to state/Go to URL/etc". Make sure that you choose this interaction only when specific item of the list is selected like item 0/1/2/... .
Hope it helps.

Link dead ...

The requested URL /pub/flashplayer/current/support/install_flash_player_osx.dmg was not found on this server.
Flash Player für Mac OS X

Yeah, that's an old link. Here's the current one:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

A LOT of iTunes broken links/tracks after Music folder move...

So yeah, I'm getting a TON of broken links / dead track links in iTunes after having to do two things to my iTunes install recently and I'm at wits end trying to fix it.
I keep my iTunes Music Folder on an external and share the iTunes library between my work Macbook Pro and my home Macbook. Every Friday I drag my iTunes folder and all contents from my MBP onto an external and replace the iTunes folder on the 'weekend' MB, then do the same back on Monday. I keep my iTunes music 'View' as 'Date Added' so that I can always be listening to whatever is newest. It's how I roll.
Well, this week I had some data problems during the transfer and had to use a previous week's iTunes Music Folder, which was fine as I hadn't added much this week.
I also got a new external because the old one was getting a little shady, so after doing the iTunes Music Folder replacement I moved my music all over to a new external drive, told iTunes where it all was at. iTunes did it's thing, 'organized' my stuff and all seemed good - until I got back deeper into the catalogue of music and started getting a LOT of broken tracks. The songs are still there, in the correct folders and all, but for some reason iTunes isn't finding them.
When I say a LOT, I mean so far it's hundreds of my 13,000 songs.
Now I COULD use the 'Super Remove Dead Tracks' script from Doug's to find all the broken files then re-add the whole library, but it will add all the old songs out of order because they will get a new 'Added' date.
I could also manually move thru my whole library holding down the arrow key for 'Next' to find all the broken links then go thru, select them, and use the 'iTunes Track CPR' script from Doug's to re-add them to the library with ratings intact, but still they will be out of order time-wise.
I cannot find a script that will parse my library, find broken links, and re-associate them with their tracks, nor can I figure out why this happened and any other way to fix it. Repairing permissions hasn't helped. Any other ideas?

Just to follow up with a more comprehensive example of looping through a Library to detect & repair "missing" file-tracks:
<pre>
property kErrAENoSuchObject:(-1728)
on run
tell (application "iTunes")
set theLibraryPlaylist to (first library playlist)
tell theLibraryPlaylist
set theNumCandidateFileTracks to (count (every file track))
repeat with i from 1 to theNumCandidateFileTracks by 1
-- Get a reference to this file-track
set thisFileTrackRef to (file track i)
-- Get this file-track's info (useful for debugging, etc.)
set thisArtist to (artist of thisFileTrackRef)
set thisAlbum to (album of thisFileTrackRef)
set thisName to (name of thisFileTrackRef)
set thisFileTrackInfo to (thisArtist & " > " & thisAlbum & " > " & thisName)
-- Display a diagnostic message every 500th file-track
if ((i mod 500) = 0) then
tell me
display dialog ("Checking file-track #" & i & ": " & ¬
return & return & thisFileTrackInfo) ¬
buttons {"Cancel", "•"} giving up after 2.5
end tell -- me
end if
-- Retrieve this file-track's target file (an AS 'alias' object), if any
-- {!!! NOTE: Due to a bug in iTunes 7.x+ (esp. when downloading), AS might
-- be unable to access the 'location' field of some file-tracks !!!}
try
set thisFileTrackTargetFile to (location of thisFileTrackRef)
on error errMsg2 number errNum2
-- Check whether it's that bizarre error: (-1728) "Can't get location of …"
if (errNum2 = (kErrAENoSuchObject of me)) then
-- Set up to just skip this track (assume it's being downloaded)
set thisFileTrackTargetFile to (anything) -- (Other than 'missing value')
else (* Re-signal all other errors *)
error errMsg2 number errNum2
end if
end try
-- Check whether this file-track is "missing" its target file
if (thisFileTrackTargetFile = (missing value))
-- Inform the user
tell me
display dialog ("Repairing this missing file-track: " & ¬
return & return & thisFileTrackInfo) ¬
buttons {"Cancel", "•"} giving up after 2.5
end tell -- me
-- Set up this target file's new pathname (e.g., via explicit user input, or
-- better yet automatically reconstructed from this file-track's tags such
-- as Artist, Album, Name, Kind, etc.)
-- ... Translate this file-track's kind into a filename-extension
set thisKind to (kind of thisFileTrackRef)
set thisNameExt to "m4a" -- ... Default
if ({thisKind} is in {("Protected AAC audio file")}) then -- Older DRM'd file
set thisNameExt to "m4p"
else if ({thisKind} is in {("MPEG audio file")}) then -- MP3
set thisNameExt to "mp3"
else if (thisKind contains "movie file") then -- E.g., interactive booklet
set thisNameExt to "mov"
end -- (thisKind = "MPEG audio file") ... else if ... else ...
-- ... Auto-build this target file's new pathname
set thisTargetFileNewPathname to ("New Disk:New Path:" & ¬
thisArtist & ":" & thisAlbum & ":" & thisName & "." & thisNameExt)
-- Assign this new target file (as an AS 'alias' object) to this file-track
-- (This is the crucial step that was impossible in older versions of iTunes!)
set (location of thisFileTrackRef) to (alias thisTargetFileNewPathname)
end if -- (thisFileTrackTargetFile = (missing value))
end repeat -- with i from 1 to theNumCandidateFileTracks by 1
end tell -- theLibraryPlaylist
end tell -- (application "iTunes")
end run
</pre>
Regards,
--P

I want to put a Firefox link in a Freeware section of my website, is there any legal issue?

Godd afternoon,
I have a comapny website and we are making a freeware software section.
I want to put a Firefox link there (http://www.cloudinfo.pt), is there any legal issue?
Can I host the package or just insert the link?
Thanks.
Fernando

hello Fernando, there shouldn't be any issue with that, but for details please refer to Mozilla's trademark policy at https://www.mozilla.org/en-US/foundation/trademarks/policy/ - especially the part about software distribution & linking.

Infotype to link Personnel Number with Vendor Master Record

Hi All,
pls help me what infotype to link Personnel Number with Vendor Master Record in AP module.
Customer require when Create Employee then system automatic gernerate Vendor Master.
pls help us.
Thanks

Hi,
PRAA works absolutely fine. I have external number range for vendors.
There is an option so that you can create HR accounts in vendor accounts
Path:Accounting> Financial accounting>Travel
management>Personal-Related Master Data> Create Vendors (tr.code PRAA)
Look at this description:
From the HR master data, this program creates a batch input session for
maintaining person-specific vendor master records.
The report can process vendor master records as follows:
o Initial set up (create/add missing company code segment)
o Uupdate (change completely according to vendor and HR reference)
o Change (only according to HR master data, for example, name
Block
The following infotypes from HR master data are taken into account for
the key date specified:
o Actions (Infotype 0000)
o Organizational Assignment (Infotype 0001)
o Personal Data (Infotype 0002)
o Permanent Residence (Infotype 0006 Subtype 1)
o Bank Details (Infotype 0009 Subtype 0 or 2)
All other required data is taken from a reference vendor that you can
specify as a parameter when you start the program. Note that for the
reference vendor, reference data must exist for all company codes that
are applicable according to HR master data. Since program RPRAPA00 cannot
assign vendor master record numbers externally when creating
vendor master records, you must be sure that the reference vendor is
assigned to an account group that requires internal number assignment.
If no house bank is specified in the reference vendor, this is
determined via feature TRVHB (Implementation guide for 'Travel Expenses'
-> Transfer to Data Medium Exchange -> Set up Feature for Determining
House Bank according to the employee's organizational situation.
The link between the HR employee's master record and the corresponding
vendor master record is set up by entering the personnel number in the
company code segment of the vendor master record.
General program flow
Program RPRAPA00 creates a sequential work file in the specified
directory. Ensure that you use a global directory that can be accessed
by all application servers; a directory is automatically proposed. The
work file is later transformed into a batch input session by the
subsequent program RFBIKR00, which is started automatically.
In test run mode this program delivers information messages which
document the creation of a batch input session. Since each information
message must be confirmed manually, the test run should only be
performed for a small number of personnel numbers.
In productive run mode, however, the program RFBIKR00 is automatically
started as a job; the information mentioned above is stored in the job
log in this case.
Initial setup of vendor master records
Corresponding vendor master records are created from the infotypes
listed above and the non-HR-specific information from the reference
vendor. During the process, the personnel number is stored in the
company code segment of the vendor master record. Persons who already
have a vendor master record with corresponding personnel number are
rejected in this run.
If a vendor master record already exists for a personnel number, but
without a company code segment for the company code in which the
employee exists at the key date entered, the program adds the required
company code segment to the vendor master record. You must however
activate the checkbox "Create new company code segment for existing
vendor master records".
The HR master data used is the info type record valid on the key date
entered.
Update of vendor master records
The corresponding vendor master records are updated from the infotypes
listed above and the non-HR-specific information from the reference
vendor. Persons who already have a vendor master record with
corresponding personnel number are rejected in this run. The system uses
HR master data from the infotype records valid for the key date.
Change vendor master records according to HR master data
All HR-specific data is changed in the vendor master records for
personnel numbers that have changes since the date recorded under '...
with last change since'. The system uses HR master data again from the
infotype records valid for the key date specified.
Block vendor master records
All vendor master records which correspond with the selected personnel
numbers are blocked for posting.
User exits
For the following situations, two empty routines are supplied in the
includes RPRAPAEX and RPRAPAEX&H5F001 which you can adapt to your
requirements.
o The employee's last name is entered in the sort field in the vendor
master record. If you do not want this to happen, you can program
the situation you want in the user exit routine
'set&H5Fmc&H5Ffield&H5Fby&H5Fuser'.
o If the address editing in the vendor master record does not suit
your requirements, it can also be changed. For this purpose you have
the user exit routine 'set&H5Faddress&H5Fby&H5Fuser'.
o If you want to assign numbers to the vendor master records to be
created via external number assignment (for example, vendor master
record number &H3D personnel number), you can adjust the user exit
routing 'SET&H5FVENDOR&H5FNO&H5FBY&H5FUSER' (in include RPRAPAEX&H5F00). Note
that
the account group of the reference vendor must also have external
number assignment.
Note that in each case a thorough knowledge of the programming
language
ABAP/4 is necessary.
Set up vendor master records in a separate system
The distribution of personnel master data from a HR system to an FI
system is a prerequisite for creating, changing, and blocking vendor
master records.
In the section Master Data Distribution (link to separate HR unit) of
the ALE IMG, an explanation is given regarding the way in which the
FI
System is supplied with the relevant employee data from the HR System
In the FI System, report RPRAPA00 described here can be used to
create,
change, and block vendor master records.
Other wise try with VPE1 t.code.
Regards
Devi

Spanning vlans across access switches in distribution block.... please help

Hi All
Can someone please explain why Cisco states that in a Campus Hierarchical modle if Vlans are spanned across Access switches in a distribution block, then the Distrubution to distribution link should be Layer 2. Is this really necesary or just a recommendation, and if so why? Can't this link be a L3 link when spanning vlans across Access switches in distribution block, as I understand the benefit of having a L3 distribution to distribution link so that SPT is avoided.
Please help

Hello,
The cisco recommended design is L3 links, but these is only possible if you have no vlans you need to span over the hole network.
It depends on your topology or what you want achieve.
If you need for one or more vlan's spanned the LAN, you need to use a layer 2 connection between all switches and between distribution too.
In my company we have for example a few vlans for restricted areas, like device management or else, so we can't use L3 Links in the distribution area because these vlan's are terminated at the firewall. I think these is good thing.
I would recommend you if you don't have to span one or more vlan's across the network to use L3 Links, specially in the case of redundancy way's. So you need no spanning-tree, but need to use other protocols like GLBP or else. The works faster and are not so confusing (for some people) as STP.
best regards,
Sebastian

Adobe reader distribution

have signed up for reader distribution it has been a week and no follow-up, still unable to download reader distribution, extermely frustrated trying to find any contact with Adobe to get assistants, I guess they don't want to talk to their customers. Why haven't I received the distribution link, I don't have time to wait another three days or more to find out it fails a second go around. Where is the download link for Adobe Reader distribution.

You get the link when your application is approved.
It's also generally-known (look through the Adobe Reader forum and you'll find it eventually) but on the off-chance that your application is rejected I'm not just going to send you to the download page.

Distribution using XML

I am using the following XML distribution file to distribute my report-level file into two locations.
<destinations>
<file id="MyFiles1" name="E:\Reports\Docs\feed1.csv" format="delimiteddata">
<include src="report"/>
</file>
<file id="MyFiles2" name="E:\reports\docs\Directory2\feed1.csv" format="delimiteddata">
<include src="report"/>
</file>
</destinations>
My understanding from the distribution process is that the query only runs once but the distribution of the file will happen per the results. But we ran the trace on this report and seems like sql is being run twice for the results(one per result). Is this how this distribution supposed to work or are we missing some step?
here is the distribution link we are using (replaced our server info)
http://myserver:7779/reports/rwservlet?&report=report.rdf&distribute=Yes&background=yes&destination=E:\Reports\Dev\Distribution_XMLs\report.xml
Please let me know if I am missing any info. Thanks in advance for any suggestions.
Edited by: user613427 on Apr 2, 2012 9:20 AM

Dear Faheem bhai,
lot of thanx for ur guidence which enable me to send payslip by mail
it's working perfectly
but a little problem i m facing to format the text in the body of mail.
NOT WORKING XML body formatted
<destinations>
<foreach>
<file id="MyFiles" name="d:\temp\Rep_&<sdate>.pdf" format="pdf" instance="this">
<include src="report"/>
</file>
</foreach>
<foreach>
<mail id="ex2"
to="&<E_MAIL>"
from="[email protected]"
subject="Salary for &<EMP_NAME>">
<body srcType="text">
Dear,
This is to inform you that your Salary of the current month is processed and please find enclosed herewith your salary slip for the current month.
Thanx and Regards
HR
</body>
<attach format="pdf" name="Payslip &<EMP_NAME>.pdf" srcType="report" instance="this">
<include src="mainSection"/>
</attach>
</mail>
</foreach>
</destinations>
the browser shows:..
Error
REP-34304: 10
Element 'p' used but not declared.
REP-34304: Distribution failed to complete, please review the distribution lists
Please Help
Thanks

Distribution Link Dead

Similar Messages

Maybe you are looking for