Distribution list from outlook disappeard

uploaded all my contacts from outlook 2007. Very pleased until I noticed my distribution lists are gone. Is there a workaround?

Hi, there are a few group emailing apps which let you send email from their own app, but MailShot Pro is the ONLY one which works from Mail, as you asked.
MailShot Pro works by creating special contacts for each of your groups, so you can use them all over your device just like they were regular contacts, from Photos, Maps, and even from Mail.
Because it works inside Mail, you can also use it to forward email to groups, with all attachments intact. it's the first app on the store to let you do this. It is also the first app on the store to work with Siri on iPhone4S for sending email to groups using your voice alone.
Peter
Soluble Apps
Full Disclosure: I am the developer of MailShot Pro and may benefit from its sales.

Similar Messages

Distribution List from outlook won't synch to 3GS I phone

I've created a distribution list in my Outlook contacts so I can email a group of people from my iphone but it won't synch over to the phone contacts. Any suggestions

If you didn't get all the apps from 3GS, chances are it's because you haven't transfered purchases recently from the 3GS. Connect the 3GS to your computer and in iTunes go to File >Transfer Purchases to get any apps and music on the iphone into your itunes library.
It's hard to tell from your post whether your computer is syncing at all witht he 4S. If it is, you should get all the apps next time you sync. If it's not, the first thing to check is your version of iTunes. Make sure you are using 10.5 or later or it won't be compatible with the 4S.
As far as wiping your 3GS, just go to Settings > General > Reset > Erase All Content And Settings. This will set it up like a new iphone.

Import Distribution list from Outlook

Hello,
I would like to import Outlook distribution lists in Mac Address Book.
I have about 40 distribution lists and the time it take to manually import is very large.
So i need a way to do it automatically.
Can you help me? I tried with a vcf and csv export, but it export only address and not the distribution list.
Many Thanks
Andrea

Hello Maria,
This should do it...
http://email.about.com/od/macosxmailtips/qt/et_import_ol_c.htm

Is there an easy way of creating a distribution list from an email with multiple addresses? Those addresses are not in your contacts already, and don't need to be.

I want to be able to take all the email addresses someone else has used to distribute an email and create the same distribution list for myself for future use. I don't want to add all those people to anywhere in my contacts list. I just want them to be in my "new distribution list", like "soccer families", etc. I tried to copy and paste, but didn't get anywhere. Maybe I was close, or maybe it isn't possible. Thoughts?

Ed on iPad wrote:
I don't want them in contacts because they are simply a related group (like my sons current soccer team). People I may never need to email again after a sports season. I don't want to have to have these people in my contacts permanently.
You don't. When the season is over, delete them.
But, the text clipping should work.
The next IOS should have a feature "create mailing list from distribution list". A fast and simple way to retain a distribution list from an email you received. People get copied all the time using distribution lists they may want to reuse easily, like school, sports or work groups. Oh well.
How is that any different from adding them to Contacts? Here's the feedback page: http://www.apple.com/feedback/
There is a set of Mail Scripts that has a function to Add Addresses from an email to any group. But, it doesn't work with Mountain Lion.

Java code to fetch contact list from outlook

I have a requirement to get the contact list from outlook using java code. There are many hooks provided by third party and they are all licensed.
I want java code example which directly communicate with outlook.

you want to directly communicate with the Outlook program?? or do you want a program that can read the Outlook data? These are two very different problems, the first being relatively difficult, the second being easier.

Since the last IOS update, I still can't drag distribution lists from my contacts to my email. Apple has been absolutely no help, in spite of contacting them 5 times on this subject. Any suggestions or help would be greatly appreciated.

Since the last IOS update, I still can't drag distribution lists from my contacts to my email. Apple has been absolutely no help, in spite of contacting them 5 times on this subject. Any suggestions or help would be greatly appreciated.
I have IOS 7.0.1 and updates are current.
Pags1970

No Mac can run any version of iOS, that is for iDevices only.
Macs run OS X. What version of that do you have?

Move a distribution list from the forest root to a sub domain.

Hello,
I am looking for the best way to migrate a distribution list I have in the AD forest root to a subdomain. Is there a way to do this without rebuilding it from scratch? We have Windows 2012 R2 domain controllers with a Windows 2008 R2 functional
level.
Thanks!
Shawn

Hi Shawn,
We can try using intraforest migration with ADMT. With the lateste updated ADMT v3.2, it supports Windows Server 2012 and 2012 R2, and we can download it from Microsoft Connect.
Microsoft Connect
http://go.microsoft.com/fwlink/?LinkId=401534
Regarding ADMT and how to install it, the following article can be referred to for more information.
ADMT Guide: Migrating and Restructuring Active Directory Domains
http://technet.microsoft.com/en-us/library/cc974332(v=WS.10).aspx
Installing ADMT in the Target Domain
http://technet.microsoft.com/en-us/library/cc974370(v=WS.10).aspx
Besides, regarding this topic, the following thread foucsed on the similiar question and can be worth taking a look.
Moving Distribution List From Root to Child DC
http://social.technet.microsoft.com/Forums/en-US/1edf8eee-66d1-496a-b51d-48e1f2124eeb/moving-distribution-list-from-root-to-child-dc?forum=winserverDS
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Hope it helps.
Best regards,
Frank Shen

HT1692 why does my ipad not pick up distribution lists from my contacts list?

why does my ipad not pick up distribution lists from my contacts list?

What is selected under the Music tab for your iPhone sync preferences with iTunes?

Important contacts list from Outlook Express

I am struggling to figure out how to import our contacts list from Outlook Express into iTunes so that we can then move them onto our new ipad mini. Whatever step(s) am I missing? Thank you & standing by.......

I can't find any documentation but I want to remember that iTunes doesn't work with outlook express.
if it is an option, you get your contacts on by connecting your device, opening iTUnes, navigating to the 'info' tab (the name did change but basically it's the tab to set up the e-mail, notes, etc that you sync)
If express is an option you'll see it listed as a choice.
If it's not then you can always mail your contacts out of outlook, open that mail on your iPad and save them from there. I had to do it once and I could only figure out how to do it one at a time but there may be a better way.

Trying to get my contact list from Outlook Express to fly over to my new iPAD. Appreciate any suggestions.

Trying to get my contact list from Outlook Express to fly over to my new iPAD. Will appreciate any suggestions.

Outlook Express accesses an address book app called Windoze Contacts for contact info, which the iPad supports syncing contacts with. This is selected under the Info tab for your iPad sync preferences with iTunes.

MAKE A DISTRIBUTION LIST FROM MY CONTACTS

HOW DO I MAKE A DISTRIBUTION LIST FROM MY CONTACTS?

Do you want to have a group email distribution list? If so, then create a New Group and give it a useful name. Select and drag into the group all those contacts you want. When you wish to send out a group email simply set the To: field to the group name you assigned to that group.

Capturing the Actual Responder for a notification sent to a Distribution List in Outlook

Hello All,
Morning , need some guidance on the issue mentioned below which we are currently facing.
We had a requirement to send Oracle Workflow Notification to a Distribution List maintained within Microsoft Outlook Mail client/server. The email address of the users which are part of the DL would be setup in this DL . lets say this DL has the
mailing address as : [email protected] which has 4 users in it let's say Oracle Apps FND users : A (email id - [email protected]), B (email id - [email protected]) , C(email id - [email protected]) , D (email id - [email protected]) with their respective email address . This email address within Oracle Apps would be linked at the FND User setup as well as in the HRMS Employee Setup --. Official details section
For this we created a ad hoc role name : 'Role_abcd' as below , then set ad hoc role attribute as shown below ( in the display name and email address we specify the email address created for the Distribution List )
wf_directory.createadhocrole
                                       (role_name                    => 'Role_abcd',
                                        role_display_name            => 'Role_abcd',
                                        notification_preference      => 'MAILATTH'
wf_directory.setadhocroleattr
                                      (role_name                    => 'Role_abcd',
                                       display_name                 => '[email protected]',
                                       email_address                => '[email protected]',
                                       notification_preference      => 'MAILATTH' );
Finally we set the Notification Performer
Item Attribute (Next_Approver) and assign the role name ('Role_abcd') created above to this performer :
wf_engine.setitemattrtext (itemtype      => p_in_itemtype,
                                       itemkey       => p_in_itemkey,
                                       aname         => 'NEXT_APPROVER',
                                       avalue        => 'Role_abcd' );
Now we are able to successfully send the workflow notifications to this Outlook DL and all the 4 users : A,B,C & D would get the same notification to their email address mentioned as a part of the DL.
Issue :
Now lets say user A Approves this notification from email notification itself using mail id : [email protected] , In this scenario the Responder name which is getting captured in the wf_notifications table is not consistent , sometimes it is getting populated as : email:[email protected] and sometimes as the value for the recipient role/original recipient itself : Role_abcd .This appears to be wrong
Ideally this responder column in wf_notifications table should get populated as ( email:[email protected] ) so that we could identify as to which person within the DL has responded to the notification.
Could someone please help as to how this could be acheived (to identify the actual responder for workflow notification sent to a Outlook Distribution List
Thanks

The following is the criteria when responding notification from email.
1. If there is no user/role exists for the email address from which the notification is responded, the responder column value will be in the form 'email:[email protected]'.
2. If there is only one user/role exists for the email address, then responder column value will be populated with that particular user/role.
3. If there are multiple user/roles with the same email address, then responder column value will be populated with the user in the following preference order
     PER -> FND_USR -> OTHERS
What is the customer code lne.
The fix mentioned in step3 was given in 12.1.3 only. The earlier versions have the responder column value will be in the form 'email:[email protected]' if there are multiple users exists for the same email address.

When setting up iCloud for my Contacts, it wiped out my contact list from Outlook on my PC. The contact list is on iCloud and on my iPad. How do I get my contact list back on my PC?

When setting up iCloud for my Contacts, it wiped out my contact list from my PC. How do I get the contact list back in Outlook on my PC?

It's in Outlook, in the iCloud account Contacts.

How to send email to external users using the distribution list from workflow

I have created distribution list in SO23 with external email addresses.
How I can use distribution list in "Send Mail component" or I should use another component?
It works fine for a single email address. And distribution list works fine when I use it via SBWP.

Hi,
Take activity step instead of Mail step. User fm SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
And use fm SO_DLI_READ_API1 to find list of user from distribution list. You can find how to use this fm in rule 30000012

Add member in Distribution List from Sql file or Sql Server

Hi
I want to add member in Distribution List in MS Exchange 2010 using MS Sql Database file
How to create connectivity between MS SQL file and MS Exchange 2010 ?
and manage DL also add and remove member from DL?

The answer to your question depends on the version of SQL Server and Exchange you are running. If you have Exchange 2007 or higher, and if you have SQL Server 2010 or higher, you can load support for both in a PowerShell session. Otherwise, you
will need to write an application to join the two. It may be simplest to schedule a flat-file dump from your SQL Server database, and use that to pull DL membership into Exchange - I know several third party corporations that have done this for their
Exchange 2003 (and earlier) management add-ons.
And before you ask, it would take too much time for me to explain how you would need to connect to and interact with the SQL Server database using PowerShell (or how to dump a flat-file from it, for that matter) for me to do it here. I suggest you
search the web for SQL Server PowerShell or SQL Server export
for that information.
Once you have the information from SQL Server, it's a simple task to run Add-DistributionGroupMember to add members and Remove-DistributionGroupMember for DL membership management. I'll caution you, though - if you are going to do massive updates to
a large distribution group, it would probably be faster to use DL management in AD. The reason for this is that you can add or remove several group members at once using the AD toolset, but you can only work with individual members with the above Exchange
commands. And working with individual members means enumerating the entire group membership for each update - and with large groups, this takes a lot of time.

Distribution list from outlook disappeard

Similar Messages

Maybe you are looking for