Distribution manager failed to create the defined share or folder on distribution point and failed to connect to remote distribution point

We have recently upgraded remote distribution point to SCCM 2012 R2 CU4. when i try to distribute the package getting the error on the distribution point configuration status "Distribution manager failed to create the defined share or folder on distribution
point and failed to connect to remote distribution point"
Errors on the package transfer log file.
CWmi::Connect() could not connect to \\XXXXXXXX.COM\root\SCCMDP. error = The operation completed successfully.. Will try FQDN
CWmi::Connect() failed to connect to \\XXXXXXX.COM\root\SCCMDP. error = The RPC server is unavailable.
Failed to connect to the DP WMI namespace on the remote DP

Thanks Sandys for your suggestions.
i have tried wbemtest from site server(Secondary site) and remote DP server. Receiving the "The RPC
server is unavailable" from both ends.
error:0x800706ba - The RPC server is unavailable

Similar Messages

SMS_MP_CONTROL_MANAGER Failed to create the CCM_Incoming Virtual Directory

Hello -
I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
Here is the message I get in the log files:
Message ID: 4963
Process ID: 4364
Thread ID: 7996
Componet: SMS_MP_CONTROL_MANAGER
MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
I've tried what this one website mentioned:
http://myitforum.com...-directory.aspx
- Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
- Uninstall the IIS component from the OS of the Site Server.
- Reboot the Site Server.
- Run ccmdelcert.exe from the SMS Toolkit.
- Reinstall the IIS component (with BITS) on the OS of the Site Server.
- Go into the IIS manager and allow WebDav.
- Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
These steps didn't seem to work, probably because it was for SMS 2003.
Here is the MPmsi log file:
<11-24-2009 17:39:28> SMSMP Setup Started....
<11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
<11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
<11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
<11-24-2009 17:39:28> Pre Req MSXML60 found.
<11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
<11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<11-24-2009 17:39:30> msxml6.msi exited with return code: 0
<11-24-2009 17:39:30> msxml6.msi Installation was successful.
<11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:30> Installing the SMSMP
<11-24-2009 17:39:30> Passed OS version check.
<11-24-2009 17:39:30> IIS Service is installed.
<11-24-2009 17:39:30> checking WebDAV configuraitons
<11-24-2009 17:39:30> WebDAV is configured
<11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
<11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<11-24-2009 17:40:24> mp.msi exited with return code: 1603
<11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed.
Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
Any advice would be greatly appricated!
Thanks!

Just read the post below
http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
<Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
Remove the MP as a site system role (if it is still installed), wait for it to finish
2.
Remove IIS completely
4.
Reboot
5.
Stop the Task Scheduler Service
6.
Rename the %windir%\Tasks folder to something else (or move it)
7.
Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
8.
Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access. We will need this in case we see
the same security failure.
9.
Reinstall IIS, BITS, WebDAV
10.
Insure BITS and WebDAV are enabled
11.
Reinstall the MP
Server Engineer

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

ADT: Web Dynpro view/window error "Failed to create the part's controls"

Hi, all
Most of the things in my ADT work fine (e.g. programs, structures, domains), even the Web Dynpro Componentcontroller can be edited.
However, with Web Dynpro view and window I get this error message: "Failed to create the part's controls".
In SAP GUI everything works fine.
Why could this happen and what can I do?
My system details:
32-bit Windows 7
Eclipse Luna Release (4.4.0)
ADT from https://tools.hana.ondemand.com/kepler, according to these instructions: SAP Development Tools for Eclipse.
SAP GUI 7.30, patch level 9.
SAP_ALL authorizations
Java: SE, version 7 update 60
Activated services (SICF): wdy_aie_vd_preview, toolsdocu, docu
The Java error log in Eclipse is quite long. It starts with:
java.lang.IllegalStateException: java.lang.IllegalArgumentException: No enum constant com.sap.adt.wda.controller.semanticfs.common.ControllerFileServices.ControllerObjectTypeEnum.WDYNWZ
    at com.sap.adt.tools.core.ui.editors.AdtFormEditor.addPages(AdtFormEditor.java:222)
    at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
    at com.sap.adt.tools.core.ui.editors.AdtFormEditor.createPages(AdtFormEditor.java:1251)
    at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:362)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.createPartControl(CompatibilityPart.java:140)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityEditor.createPartControl(CompatibilityEditor.java:99)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.create(CompatibilityPart.java:321)
    at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
As it is not popular to post long logs unnecessarily, I will skip the rest of it for the moment - let me know if it could help and I will post it.
Thanks for help!
KR,
Igor

Hi Ponraj,
note applied without any problem.
I'm still facing some difficulties accessing a WD component, maybe you could suggest me how to solve/proceed:
in Eclipse Luna, I can access now a WD but "Layout" tab doesn't work - HTTP 403 Forbidden - Service cannot be reached. I guess it's a missing configuration, could you help me out on this?
EDIT: This one is solved; I just missed to activate a service in SICF (WDY_AIE_VD_PREVIEW).
That Eclipse module however seems not to be very stable; I tried to open a standard SRM WD view (wd component /SAPSRM/WDC_DO_SOCO_GAF_1, view V_AO_SOCO_GAF_1) and that resulted in the message:
500 SAP Internal Server Error
ERROR: Conversion of type C LENGTH 255 to type TABLE OF DEEP_STRUCTURE not supported. (termination: RABAX_STATE)"
is there a way, from the Methods tab, to access directly to a particular method's implementation? The only way I found is going manually under the IMPLEMENTATION tab and CTRL+F with the method's name.
is there any way to access to a particular enhancement made on the WD? Using SapGUI, there's a special "vortex" button to switch on a specific enhancement, but under Eclipse I can't find the alternative command.
I know we're getting a bit OT with respect to the topic, anyway if there's a guide that could help clarifying my doubts please, share that documentation
BR,
M.

RDS 2012 The WinRM service failed to create the following SPNs: Additional Data The error received was 1355

Hi,
I have RDS 2012 session deployment in Azure with connection broker high availability.
The "Remote Desktop Management" service does not start automatically when the connection broker virtual machines are stopped and started.
I see the below error in event logs of both the connection broker VMs
Note: WHen i manually start the "Remote Desktop Management" service after this error, it all works without issues.
I get
Error ID 46 - Crash dump initialization failed!
Warning 10154 - in Microsoft-Windows-Windows Remote Management
The WinRM service failed to create the following SPNs:
Additional Data
The error received was 1355

Hi,
Thank you for posting in Windows Server Forum.
In respect to error 46, this issue may occur if the computer boots without a configured dump file. The default dump file is the pagefile. During a clean Windows OS installation, the very first boot will hit this condition as the pagefile has not been set up
yet.
To resolve this issue, you may want complete the paging file configuration.
More information:
Event ID 46 logged when you start a computer
http://support.microsoft.com/kb/2756313/EN-US
In regards to error 10154, you need to create the SPN specified in the event using the
setspn.exe utility and also need to grant the “Validated Write to Service Principal Name” permission to the NETWORK SERVICE.
For more information refer beneath articles.
Event ID 10154 — Configuration
http://technet.microsoft.com/en-us/library/dd348559(v=ws.10).aspx
Domain Controllers Warning Event ID: 10154
http://srvcore.wordpress.com/2010/01/02/domain-controllers-warning-event-id-10154/
Hope it helps!
Thanks,
Dharmesh

Error in File... Failed to create the Crystal Query Engine.

I am attempting to use Compliance Suite 4 to open a report. The error I get is:
Error in File
S:\Applications\Apps\CSuite\Reports\schedstu.rpt:
Failed to create the Crystal Query Engine.
S:\Applications\Apps\CSUITE\Report\schedstu.rpt
When we attempt to open the report with Crystal Reports XI we get the following:
NO SAVED DATA
This report file does not contain saved data and cannot be viewed.
These reports will open for the same account on a different PC. Has anyone seen this? Thanks!

You'll probably get a quicker answer from the people at Compliance Suite. All that error is telling me is that the database engine does not understand what it is that you're throwing at it in terms of a database connection or data type. As it's a 3rd party app, I do not know how this is implemented so that is all I can say...
Ludek

"backup failed while creating the backup folder"

Time machine fails backup.
Backup volume is a 1TB USB External.
Message appears: "backup failed while creating the backup folder"
However whwn enter time machine is entered, there is displayed many-many backup depictions.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Failed to create the Crystal Query Engine. Please Help me resolve this issu

i keep getting the this error :
Failed to create the Crystal Query Engine.
on this line of code :
billing.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
i'm trying to use export it to pdf.
the page works fine on my notebook. but when deployed to window server 2003 server i get this error.
Crystal Reports Basic Runtime for Visual Studio 2008 is already installed there.
I have provided NETWORK_SERVICE and ASPNET access to the root drive C:, which is the only drive on the server. but i'm getting this error.

I'd like you to download the Process Monitor utility from here:
http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
Filter for the name of your process as this utility makes large logs. Once you have a log, search for any error messages (Access denied, etc.).
The only note I found on the same error is [here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] which points to the crqe.dll being at fault.
See if the Depends utility tells you of any missing dependencies. Depends is here:
http://www.dependencywalker.com/
(Simply open the dll in the utility)
Ludek

'Failed to Create the SOA Component'

Hi All,
I have installed the Jdeveloper 11.1.1.3.0 in my windows 7 machine.
Versions are as below,
ADF Business Components 11.1.1.56.60
BPMN Editor 11.1.1.3.0.6.84
Java (TM) Platform 1.6.0_18
Oracle IDE 11.1.1.3.37.56.60
SOA Composite Editor 11.1.1.3.0.25.57
Versioning Support 11.1.1.3.37.56.60
machine RAM - 2GB
Have enough hard disk spaces (more than 50 G)
Im getting a error *'Failed to create the SOA component'* when i trying to create a BPMN project.
It works properly for BPEL projects.
I have reinstalled the jdeveloper several times, but didn't work.
What should i do???
Thank You.......
Edited by: Nir on Apr 8, 2012 10:01 PM

Yes ..
version is ----> BPMN Editor 11.1.1.3.0.6.84
when i try to include a *'BPMN Process'* to Composite.xml it gives below error,
java.lang.NullPointerException
     at oracle.bpm.fusion.soa.SCAComponentBPMN.createImplementation(SCAComponentBPMN.java:71)
     at oracle.tip.tools.ide.fabric.gui.controller.ActionComponentEdit.add(ActionComponentEdit.java:102)
     at oracle.tip.tools.ide.fabric.gui.controller.ActionComponentEdit.process(ActionComponentEdit.java:78)
Thank You
IS THERE ANYONE TO HELP ME ?????
Edited by: Nir on Apr 8, 2012 11:27 PM
Edited by: Nir on Apr 9, 2012 3:12 AM
When i create the project in a different folder it got created.
But i cant create BPMN projects in new folders
Thanks
Edited by: Nir on Apr 10, 2012 1:58 AM

Failed to create the volume shadow copy inside of virtual machine 'SBS-SVR'

Hi there,
Currently only partial backups are being completed.
I receive the following error:
Writer Failures
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Instance Id: {B8818795-2E27-44A3-85AB-D4C3DDBD288E}
Writer Name: Microsoft Hyper-V VSS Writer
Writer State: 5
Failure Result: 80042336
Application Result: 80004005
Application Message: (null)
Component: 9E70CA9C-B992-425D-B091-95B76763BE39
Logical Path: (null)
Component Result: 800423F3
Component Message: Failed to create the volume shadow copy inside of virtual machine 'SBS-SVR'. (Virtual machine ID 9E70CA9C-B992-425D-B091-95B76763BE39)
File Spec: C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines\\9E70CA9C-B992-425D-B091-95B76763BE39.xml Recursive: 0
File Spec: C:\Users\Public\Documents\Hyper-V\Virtual hard disks\\SBS-SVR-SYSTEM_404D40C1-A532-4272-AE8B-251C4A03B4F3.avhdx Recursive: 0
File Spec: C:\Users\Public\Documents\Hyper-V\Virtual hard disks\\SBS-SVR-SYSTEM.vhdx Recursive: 0
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: 9E70CA9C-B992-425D-B091-95B76763BE39
Caption : Backup Using Child Partition Snapshot\SBS-SVR
Logical Path:
Error : 80780175
Error Message : Component was skipped from volume shadow copy.
Detailed Error : 800423F3
Detailed Error Message : The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
The success file is as follows:
Backup of volume \\?\Volume{72ec559c-60ca-11e2-93e8-806e6f6e6963}\ succeeded.
Backup of volume C: succeeded.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: Host Component
Caption : Host Component
Logical Path:
In the event logs: application, i found this:
The backup operation that started at '‎2014‎-‎05‎-‎18T11:00:22.221374600Z' has failed to back up volume(s) ''. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Some errors that are occuring that may be linked are:
Event Viewer, Application and Service Logs, Microsoft, Windows, Hyper-V-VMMS (the below is occuring every 2 minutes)
Failed to register the service principal name 'Hyper-V Replica Service'.
Failed to register the service principal name 'Microsoft Virtual System Migration Service'.
Failed to register the service principal name 'Microsoft Virtual Console Service'.
Upon some research I tried the following without much luck:
http://support.microsoft.com/kb/2761899
http://social.technet.microsoft.com/wiki/contents/articles/1340.hyper-v-troubleshooting-event-id-14050-vmms.aspx
Specs:
Microsoft Windows Server 2012 Standard x64
6.2.9200
ProLiant ML350e Gen8
VM: Microsoft® Windows Server® 2008 Standard FE x64
6.0.6002 Service Pack 2
Look forward to any help.
John

Hi John,
Please run “vssadmin list writers” command to check the VSS writer status. There is a similar thread, please go through it to help troubleshoot this issue:
Windows 2012 Backup for HyperV failed with error code '0x80780049'
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f1a0c9c6-7b4c-409c-b4da-c145b8b59eb1/windows-2012-backup-for-hyperv-failed-with-error-code-0x80780049?forum=winserverhyperv
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error 8004230f and 2155348075 "Windows Backup failed to create the shared protection point on the source volumes."

Hello,
When I try to run a system state backup with this command: wbadmin start systemstatebackup -backuptarget:<drive letter>
I get the error
"Failed to create the shared protection point on the source volumes.
ERROR - Volume Shadow Copy Service operation error (0x8004230f)
The shadow copy provider had an unexpected error while trying to process the specified operation."
I'm not sure how to fix this. I'm logged into the machine as an Administrator.
Windows Server Enterprise 2008 SP2 64-bit
Any suggestions??

After I re-registered the dll, I'm still getting the same error in the command window. The DLL registers successfully and the "MS Software Shadow Copy Provider" starts fine.
Two errors in the Event Viewer:
1.)
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          1/21/2014 10:11:25 AM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      mfacs-server-7.gs.umt.edu
Description:
Backup started at '1/21/2014 5:11:11 PM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348075'. Please rerun backup once issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
    <EventID>521</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-21T17:11:25.287Z" />
    <EventRecordID>11410</EventRecordID>
    <Correlation />
    <Execution ProcessID="4964" ThreadID="3528" />
    <Channel>Application</Channel>
    <Computer>mfacs-server-7.gs.umt.edu</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="BackupTime">2014-01-21T17:11:11.920Z</Data>
    <Data Name="ErrorCode">2155348075</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
</EventData>
</Event>
2.)
Log Name:      Application
Source:        VSS
Date:          1/21/2014 10:11:24 AM
Event ID:      12293
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mfacs-server-7.gs.umt.edu
Description:
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details EndPrepareSnapshots({40d86592-3a48-4d38-afab-0e4a7b8bb8f1}) [hr = 0x8000ffff].
Operation:
   Executing Asynchronous Operation
Context:
   Current State: DoSnapshotSet
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">12293</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-21T17:11:24.000Z" />
    <EventRecordID>11409</EventRecordID>
    <Channel>Application</Channel>
    <Computer>mfacs-server-7.gs.umt.edu</Computer>
    <Security />
</System>
<EventData>
    <Data>{b5946137-7b9f-4925-af80-51abd60b20d5}</Data>
    <Data>EndPrepareSnapshots({40d86592-3a48-4d38-afab-0e4a7b8bb8f1})</Data>
    <Data>0x8000ffff</Data>
    <Data>
Operation:
   Executing Asynchronous Operation
Context:
   Current State: DoSnapshotSet</Data>
    <Binary>2D20436F64653A20434F52534E50534330303030313630392D2043616C6C3A20434F52534E50534330303030313539302D205049443A202030303030323732302D205449443A202030303030343139322D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E5420415554484F524954595C53595354454D20202020202D205369643A2020532D312D352D3138</Binary>
</EventData>
</Event>
Results of vssadmin list writers:
C:\Windows\system32>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {f3c10044-4938-4d49-9f2d-789c571a6428}
   State: [7] Failed
   Last error: No error
Writer name: 'SqlServerWriter'
   Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
   Writer Instance Id: {aaa19109-d447-40ec-b71e-2a8fbaed55ad}
   State: [7] Failed
   Last error: No error
Writer name: 'ASR Writer'
   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Instance Id: {f64b2bfa-fd68-4729-bebb-7e281b144fc5}
   State: [7] Failed
   Last error: No error
Writer name: 'DPM Writer'
   Writer Id: {0074a271-4f24-43e0-9ec7-28a44189cb80}
   Writer Instance Id: {38646851-4a56-4499-b90c-181a839cae95}
   State: [1] Stable
   Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   Writer Instance Id: {7ae6130c-b116-44a9-87a4-4b8bee461131}
   State: [7] Failed
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {62a5b392-a50f-4703-8c23-acb5590efcd1}
   State: [7] Failed
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {1615a920-5ec9-43d0-b6ff-a5b767430623}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {f22b72f6-940b-42c9-a824-80858e6f5f5c}
   State: [7] Failed
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {4c603239-dd36-4343-aba7-73858e574e39}
   State: [7] Failed
   Last error: No error
C:\Windows\system32>
Thanks!

Failed to create the CTI Route Point and corresponding Line on Cisco Unified CM.

Dear All
Kindly I got that message "Failed to create the CTI Route Point and corresponding Line on Cisco Unified CM." When I am trying to create Trigger on the UCCX for an Application,
Bye the way I create Call Control Group and it gives me OK, and I create it from Subsystem>Cisco Unified CM Telephony>Call Control Group
and Type CTI Ports: 4 | Inbound | Starting DN : 9000 "Nothing in my route pattern report have created CTI numbers"
So Appreciate your help to avoid that errors raised when I am trying to create new prompts
Thanks
Ahmed Samir Yosuef
Integration Manager

Let me know the deployment model and Node details

My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

How to create the default empty work book with company logo and address????

Hi Guru's
I am working in ECC5.0 (BW 3.5), i wann create the default empty work book with company logo and company address. so when i am executing any query's that should open in the default empty work book.
greatly appreciated your help. will assign pt's for sure.
thanks and regards
Mohan

Hi Mohan,
Report designer is used in BI 7.It is a seperate application used for formatting
the report.
For BW3.5,go through this link.
http://help.sap.com/saphelp_nw04/helpdata/en/33/746e393cf65c1ae10000000a114084/frameset.htm
This would help you
Regards,
Senoy

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

Your warranty includes 90 days of phone support. Contact Apple.

Distribution manager failed to create the defined share or folder on distribution point and failed to connect to remote distribution point

Similar Messages

Maybe you are looking for