Distribution of Distribution modell error

Hello,
I've created my distribution model in a 4.6C system but everytime I try to distribute the modell I get an error saying:
Kommunikationsfehler ist aufgetreten
Server repository could not create function template for 'MODEL_VIEW_REPLICATE'
Any ideas?
Kind Regards,
Christoph Mertins

Hello Christoph,
During the ALE Model Distribuion, the Function Module MODEL_DISTRIBUTE is called and from within this FM a
Remote Call is made in the RFC Destination (Target System) for the Function MODEL_VIEW_REPLICATE.
It seems you are getting the below stated issue during the Remote Call.
The possible reasons for this are
a) Model View name is not specified
b) No Authorization to Create or Change the Model View in target system for the user id mentioned in SM59
c) The BAPI or Message Type involved in the Distribution Model already exists in another Distribution Model in Target system
d) Model is being edited by another user in the target system
Based on these reasons, you can trouble-shoot the problem.
Hope this resolves your problem. Pls reward.
With Regards
Vijay Gajavalli

Similar Messages

Error while generating Distribution Model in ERP to EWM

I am trying to generate new distribution Model from ERP to EWM for my warehouse.
In system one distribution Model already exists for another warehouse. Below error encountered.

Hi Suraj,
Thanks for the answer
Yes i was using the Wrong Distribution Model , I should have selected EWM , but i was giving some new name as i thought that was required. Hence message came.
I did with EWM distribution Model and all worked well.
Thanks
Inder

Error while distributing a distribution model in BD64

Hi,
I am trying to send an IDOC from one client to another client of the same SAP system. To achieve that, i have created the necessary logical systems and made the necessary partner, port configuration as well as RFC Destination. In BD64, I have created a new model and added a BAPI 'SAVEREPLICA' and Object 'BUS1093' using Add BAPI button. But when I am trying to distribute the model it's giving the following error - 'Model view ABCDX has not been updated. Rreason: Distribution model is currently being processed'.
Kindly help,
Thanks in advance,
Deep.

Using of BAPI is not accepted between two clients of the same system, you'll have to use different SAP systems

File2idoc:Error in ALE distribution model for SendResponse

Hi,
I'm using XI to configure a file to idoc scenario.
Now in WE19 I could see relevant data,but in WE05 it showed the error status 51,and the detail message was "Error in ALE distribution model for SendResponse".
Do I have to create a distribution model in BD64?I did this ,but failed to create.

hi,
i dont think distribution model is required for inbound case.
just check the below configuration.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
chirag

Error while distributing the ALE distribution model through BD64

Hi,
I am getting the error while distributing the distribution model through BD64. The error is as follows:
"Model view DVGDVH has not been updated
Reason: the following ALE connection already exists in model view TESTMOD".
What does this means?
Regards,
Soumya.

Dear Sapera,
I faced the same problem last night.
We just manually deleted the distribution model from receiving system.
Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
Once deleted log in to sender system and then select model and distribute again.
by performing this we were able to resolve this issue.
Warm regards,

Error in IDOC Distribution Model

HI all ;
Please Help me in this Issue!!
am working with standard IDOC Using MATMAS (Material Master Transfer)
LS_800 - Outbound.
LR_810 - Inbound.
--> BD54.
--> SCC4.
-->SM59.
-->WE21.
-->WE20.
--> WE20 ( in inbound side) Clear Up to this level.
After that the Problem in Distributing the Model,,,,
In Bd64 t-code Distribution Model.
while Generating the Partner Profiles in BD64 ;
its giving the blank message like below.
No message has been defined for the selection conditions in the model.
when we distribute(in BD64) 2 Errors (red) Like Below;
RFC destination for Syncronous Communication (Message type SYNCH)
Partner Profile LS LR_810 SYNCH does Not Exits.
Generate Partner Profile.
or Specify outbound partner Profile for message type SYNCH
RFC destination for Syncronous Communication (Message type SYNCH)
Partner Profile LS LS_810 SYNCH does Not Exits
Generate Partner Profile.
or Specify outbound partner Profile for message type SYNCH
Thannks;
Upender.

In Bd64 t-code Distribution Model.
create the model view ,
add message type Matmas to it.
-> select the model view
->environment-> generate partner profiles
In Partner Profiles u hv to maintain the Outbound parameters in Both LS_800 &
LR_810 .
in receiver port, double click & make sure that the rfc destination assigned connects successfully..
Regards.

ALE : Error -- Distribution model is currently being processed

Dear all,
I m getting following error during distribute model view....
Model view MODEL_VIEW has not been updated
Rreason: Distribution model is currently being processed.
Thanks in Advance.

Hi,
When i genrating partner profile following message i get.
Partner
System ERP100                             System ERP100 as a partner type already exists
System ERP400                             System ERP400 as a partner type already exists
Port
System ERP400                             Port A000000017 with RFC destination ERP400 already exists
Outb. Parameters
System ERP400                             Outbound parameters for message type MATMAS MATMAS05 already exist
                                           Outbound parameters for message type SYNCH SYNCHRON already exist
Thanks

Error Distribution Model

Hi,
We Created a distribution model with Sender,receiver and message type etc. and we are using that model. And we used this model for a long time. Suddenly we are getting problems and when we checked and tried to distribute the model again we are getting error "user SAPUSER has no RFC authorization to Function group BD22". Anyone have any Idea why we are getting this error suddenly.

Hi Sanjay,
The authorizations required for the SAPUSER are already in place and when I try to test the connection of RFC destination in which the user is used to logon to remote system, it's succesfully working.And as I said, this was working earlier and suddenly giving this error.

Error executing BAPI attached to ALE Distribution Model

Hi experts,
I am executing BAPI_EXCHANGERATE_SAVEREPLICA which has been included in an ALE distribution model as I wish to replicate exchange rates from my source client to a number of remote clients.
When I execute the BAPI I get an information message back in the bapi return code as follows "one table record planned for update". Does anyone know what this means? I would have expected idocs to have been created and sent across to the target clients and for the BAPI to have been executed in the target system but nothing has happened. I have released the method (BAPI) and tried various options on the partner profile but still get the same message returned when I call the BAPI.
Any help on executing this BAPI via ALE would be much appreciated.
Thanks
Adrian

This is information message that informs you that the selected row may be updated. Then when you call BAPI_TRANSACTION_COMMIT the rows will be updated.

Error On Distribution Model in the Backend

Hello,
I'm customizing our SRM and Backend to work together.
I'm in the part Distribution Model. It works on SRM but on my backend, when I want to "Generate Partner" I have a message "No messages have been defined for the selection conditions in the model" and nothing is done.
I don't know why...
I don't know if it is link but me RFC connexion that I created on SRM to link to the backend name for example ABC_020 and in the backend is one RFC is ABCMAND020. doesn't it matter if they don't have the same name?
Thanks in advance.
If someone has a cookbook or documentation about SRM can you please send me at "[email protected]"
Thanks twice.

Hi Eileen,
We have observed that without local RFCs i.e.
SRM to SRM
R/3 to R/3
the business objects (matl/services) don't get replicated as you can not configure the Middleware sites in SMOEAC.
Don't know whether it will help for Distribution model but worth trying
BR
Dinesh
<b>Reward if helps</b>

Cannot find the Recv Logical system in Distribution Model

HI experts,
Im triying a Idoc to file scenario, the logical system for PI and R3 has been already created and assinged for the appropriate clients.
and i ve created the port from r3 using tcode we21 and in PI using idx1 and Idx2. The RFC destination also created for PI and R3 system.. when i created the distribution model using BD64 in R2. when i assigning message type i can give the source logical system and i cant find the Receiver logical system... Also in WE19 i cant find the receiver port (which i created in IDX1 and IDX2)..
Could u tell me how to solve this prob???
Regards
Balaji

Hii Ravi,
Thanks for your reply,
Yes i have created the port (RFC800) idx1 and give RFC destination which points the R3 system.
I have assigned the meta data to that port using tcode idx2.
And I have created port with port name "PORT800" in R3 using we21 and give the RFC destination which points the PI system
when im using the WE19... i gave source logical system as R3 Logical system and receiver logical system as PI Logical system.
now im getting error like "PORT RFC800 DOESNT EXIT IN THE THE TABLE OF PORT DISCRIPTIONS".
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM

Not able to create Distribution Model nor Import using IDX2

Hello,
I have created an RFC destination, and i'm able to connect successfully also remote logon is working with error, i have also created Port associated in RFC destination.
But when i try to added a message type in distribution model, i get an error rfc destination not maintained.
Same goes with Import of metadata, i not able to maintain an Port in IDX1, hence not able to import metadata.
If i import an Idoc or create an external defination will it help.
any help would be appreciated.
Regards,
Abhishek

>>i not able to maintain an Port in IDX1
I hope you have created RFC destination in PI system. What error do you see when you try to maintain port?
Regards,
Prateek Raj Srivastava

ALE distribution model - one message type to more than one recipient

Hello colleagues,
currently I'm working on an integration project between one SAP system and an e-shop system. The communication is established through IDOCs ( both inbound and outbound ). There is another system ( POS ) which is already integrated
with SAP via IDOCs also.
   Now I'm facing the following problem regarding distribution of transactional IDOCs ( orders, deliveries, etc. ): when assigning one message type ( for example DESADV - Delivery: Shipping notification ) to more than one external system in ALE distribution model I receive a message alerting that one message type can be send to only one recipient.
The distribution model is as follows:
Model Views
   SAP to POS
      SAPDEV ( the SAP system )
         POS ( the external POS system )
            DESADV
   SAP to E-SHOP
      SAPDEV ( the SAP system )
         E-SHOP ( the external e-shop system )
            DESADV
   Well, the system message is clear and I did the obvious: create a complete copy to the original message type and than assign it to the E-SHOP system ( the original message type is already used in integration between SAP and POS ).
As you can see I have found a workaround already but I think that it comes natural to SAP to communicate with other systems and to exchange same kind of documents to those systems and I can't believe that there isn't a standard solution for situation like this.
FYI I'm working on SAP ECC 6.0
Thanks in advance.
Wish you nice day and successful week ,
Vladimir

I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
Mark this post as answered so that others can find it useful.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

ALE Distribution Model

Hi,
I've created an ALE distribution model to process the interface concerning Set Up HR and Accounting. Initialy we make it all and distribute it to the receiving system (FI) and it seems to be ok. After that the funcional team generate some movements and the IDOC's were generated but they were not sent to the FI system. We've a look at tRFC and an error concerning user or password invalid appears, so i define again the user comunication and after a few adjustments to the model view we distribute it again to the FI system. When i execute it the following message appears : <b>Model view HRFI-CFP has not been updated / Rreason: Distribution model is currently being processed.
</b>
Next step we delete the model view and created it again but the same error still remains.
Can anyone help me ???
Thanks is advance.
JMMatos

Hi
Distribution Model A model that describes the ALE message flow between logical systems.
Applications and the ALE distribution service layer use the model to determine receivers and to control the data distribution. The relationships between logical systems, message types, BAPIs and filters are defined in the distribution model.
Ex: The screen shot depicts customer distribution mode ALE_TRNG_Mar07.
Sender Logical System EC1CLNT800
Receiver Logical System SALES
Message Type CREMAS
No filter conditions defined.
This configuration step allows the installation of core ALE features on which data transfer activity will be based.
In the distribution model you can specify the messages to be sent to a given logical system. You can also define the conditions for the content and dispatch of messages in the filters.
The distribution model consists of one or more views that you can define
After creating the distribution model the model needs to be distributed to the receiver system.
Partner profiles need to be generated in both sender and receiver systems using transaction BD82 (automatically) or WE20 (manually).

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

Distribution of Distribution modell error

Similar Messages

Maybe you are looking for