Distribution of workbook with broadcast

Hi gurus,
I have a question ... I have a workbook to distribute via email with the broadcast.
It's possible to do that : when I distribute this workbook I want to split this workbook by a characteristic. For example : I want that the workbook is split in x workbook (x = the number of for example BRAND) ? I can do that with the distribution of Query but what about the workbook ?
Thanks in advance
Aleksi

Hi Praksah,
I have workbook powered by 3 different queries,I want to preform email bursting of this work book based Vendor value.
i noticed that workbooks can't b filtered using chars values (Vendor)
Can you please explain the alternate apporach mentioned above.
Thans in advance

Similar Messages

  • Broadcasting a Excel Workbook with additional drilldowns

    I am trying to broadcast a Bex Excel Workbook by drilling down on couple of characteristics.  The Underlying workbook has already been set NOT to refer to the Queries Global Definition.
    So my problem is that when I broadcast this workbook after drilling down on the additional characteristics, it does not send it in the way I wanted, but it sends the workbook with whatever has been defined in the Bex Query (which is with no additional drilldowns). 
    I would like to know if there is way to add more drilldowns in the workbook and then distribute that workbook to the end users.

    No we don't want to save the workbook, becuase this is for the end user who wants to add a drilldown and then would like to send the output to his/her own email.   Basically end user should be able to add drilldowns to the workbook in the way he wants and wants to schedule the workbook in background using Broadcasting.

  • How can I set information broadcasting (send Workbook with E-mail) in serv.

    FYI: I set a broadcasting schedule to send workbook with e-mail. The pre-calculated server was set already.
    How can I set information broadcasting (send Workbook via E-mail) when I cannot access enterprise portal ?

    Hi,
    Check this thread:
    Work book broadcasting
    Regards
    Pcrao.

  • Varible for Information Broadcasting Schedule (send Workbook with E-mail)

    FYI: I set a broadcasting schedule to send workbook with e-mail. The pre-calculated server was set already.
    My problem is that I want the value in selection-screen to be dynamic.
    e.g. I want the date (variable for 0CALDAY) to be filled with value of current date (the date on the day that the schedule is executed).
    When i set the broadcasting schedule, the wizard asks me to set the variable for selection screen. ("Variable Assignment"). I selected the variance that i prepared. (However, for that variance the date is fixed.) So, for everyday that the schedule is executed, the date value of the selection-screen is not the date that the broadcast schedule is execute; but it was the date on which i set the schedule.
    Is there any method to set a dynamic variable (something like a dynamic selection of ABAP report) ?
    or How can i solve this problem?
    Thank you very much for your inputs in advance.
    Rlyn

    Hi Rlyn,
    Have you thought of using standard SAP exit variable for restricting 0CALDAY in the query in the workbook on which the setting has been scheduled.
    The SAP exit would automatically determine the current date and query your dataset as per the current date and then broadcast.
    Other way to do this would be to create a variant ....as you have done and to change the value of the variant everyday using an ABAP program to change the value in the database tables (RSRVARIANT for 3.x and RSPARAMETERIZA)
    I would suggest you to try the former method(SAP exit variable).
    Hope it helps,
    Best regards,
    Sunmit.
    Edited by: sunmit bhandari on Apr 12, 2009 4:10 PM. Apologies for posting my answer twice...

  • How to include Distribution list in Bex Broadcaster

    Hi experts,
    Can anyone tell me how to include distribution list in bex broadcaster?
    We have created a distribution list which we use in SBWP tcode for sending reports through mail.
    I want to try broadcasting reports through Bex query designer and scheduling weekly. Although bex broadcaster
    provides us the facility to enter the email ids of user but it is very tedious to type all the ids. Can i incorporate
    the distribution list, which we have already created, in broadcaster?

    Just to close this topic.
    I have reported a bug to Android project, because bottom-line they are responsible for the error - not SAP BEx.
    Anyone interested can see the bug report here:
    [http://code.google.com/p/android/issues/detail?id=24257]
    If you decide to look at the bug report, please mark it with a Star to bring focus on this problem.
    Best regards,
    Jacob

  • Migration Issue - Workbook with VBA

    Hello Gurus,
    I have an issue while upgrading the 3.X workbook with VBA to 7.X.The Underlying queries are migarted to 7.X and I migrated the WB and ran it in 7.X. I found out the Macros was not running. When I debugged the VBA macros I found out the Query ID which was getting pased in a function is different(betwen 3.X and 7.X workbook). The WB in 3.X(even query) has Query ID as SAPBEXQ0001 and the query ID in 7.X is something like DP_4.
    In the VBA code which was written in 3.X reference to Query ID is made as SAPBEXQ0001and after migrating the WB to 7.X the underlying query ID is getting getting changed to DP_4 and the VBA macros is not executing(since there is chnage in Query ID).
    I am not sure how could I change the query ID from DP_4 to SAPBEXQ0001, SO the VBA macros will run in 7.X also. I dont want to chnage the VBA macros.
    Plz suggest.
    Regards,
    BR

    Haven't broadcast any wkbks with vba in them, but it should work.  I've even seen posts on SDN that talk about how to add vba code to a workbook so that when Broadcaster generates it, it saves the wkbk to file server.  Broadcaster is goign to launch Excel to geenrate the wkbks and as long as the vba code is setup to run automatically, you should be OK.

  • Excel Workbook with Excel Data Model stored on SharePoint - daily refresh

    I'm not sure if this is exactly the right forum but I'm hoping that someone here can either answer or point me in the right direction.
    I have an Excel Workbook with an Excel Data Model.
    The Excel Data Model uses SQL to contact our data warehouse and pull through data into tables.
    We are storing the Workbook on a SharePoint site and viewing it using Excel Services.
    The data in our data warehouse is updated daily and so I would like to refresh the workbook daily and remove the option to refresh the data in the browser.
    Is this possible with a workbook that has an Excel Data Model (I've seen lots of posts that relate to workbooks with connections to tabular models).
    Thanks
    Paul

    Hi Paul,
    I have answered this issue in this thread that you posted in SQL Server PowerPivot for SharePoint forum, please see:
    http://social.msdn.microsoft.com/Forums/en-US/9627939c-e9f1-48ae-a6ed-0c238d8f2d69/excel-workbook-with-excel-data-model-stored-on-sharepoint-daily-refresh?forum=sqlkjpowerpointforsharepoint
    Furthermore, this issue is more related to PowerPivot for SharePoint. If you have any more questions about PowerPivot for SharePoint, I would sugget you open a new thread in the forum below for better support:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=sqlkjpowerpointforsharepoint
    Thanks for your understanding.
    Regards,
    Elvis Long
    TechNet Community Support

  • Problem of creating workbook with permanent template?

    Hi all,
    Iam facing some problem while creating the workbook with permanent template.Let me expalin in detail.
    I have created 3 queries (ex:Stock) and i have to insert these in one workbook with permanent template.I  had selected the the permanent template option in settings also.iam able to insert the 3 queris and iam not getting the permanent tempalate.which is mandatory.
    I tried saving the existing workbook with same tempalate and removed the query and tried to insert the queries but iam getting <b>abbort system error in program</b>
    Pls help me out of this issue.
    Thanks and regards,
    Rajeev

    Hi Joe,
    We've seen this error when using express VI's inside of template VI's which are loaded using VI server. Are you doing that? If yes, then take all the express VIs that are inside the template VI and turn them into static subVIs.
    I don't know if it will help in your case, but let's try it.
    Regards,
    Luca
    Regards,
    Luca

  • Error when opening a workbook with mandatory variables

    BEx analyzer displays an error message window in the same time as the variable popup window.
    The worbook is linked to 1 query that uses 2 mandatory variables (month ?, year ?), and was defined in the test system.
    I assume that values are thus saved within the workbbok.
    The developper had 0bi_all autorisation.
    When a reporting user is opening it (also in the test system), the error message is displayed.
    This happens only the 1st time when Analyzer is started, and by clicking on the OK button, we are able to run the query.
    The next workbook refresh runs without the error message display.
    Question =  does anybody know the reason of this, and how to avoid the error message ?
    more infos:
    error message E019(R9E) appears for each variable (thus, 2 time with a query with 2 variables):
    Help type 5 is not valid for the platform NONE
    Exception 5 occured while calling IWB_HTML_HELP_URL_GET
    the details of this error message is:
    Diagnosis
       You tried to start the online help with help type on platform. Help type is not supported on this platform.
    System Response
       Profile parameter eu/iwb/help_type must contain a valid help type.
    Diagnosis
       The documentation is not correctly connected to the BI server.
    System Response
       The documentation cannot be displayed.

    i checked the query and authorisation with RSRV, but this didn't help, furthermore, a lot a functions are not implemented in the system, sorry.
    i also changed the query and workbook, and i think that it depends on the workbook release 3.x or 7.
    imagine following situations: same query 7.0, same workbook 7.0
    with BI7
    1) opening the query with variables doesn't display the error message
    2) refreshing the workbook with the query with variables displays the error message (only for a non mandatory variable - as soon as there is a variable, the error message is displayed)
    3) refreshing the workbook with the query without variables doesn't display the error message
    with BW 3.x
    4) refreshing a new workbook 3.x with the query with variables doesn't display the error message
    i also investigate in the function modules for workbooks (RS...), but nothing helped.
    i still think that it is linked to authorisations, because with sap_all, the message isn't displayed.
    how can i continue ?
    Edited by: Claire Mignerey on Mar 17, 2009 2:37 PM

  • Getting the error access denied trying to modify the workbook with identifier in Disocverer Admin

    Hi All,
    I have exported a workbook created by business user as an .eex file logging in as discoverer admin from a Production enviornment (transactional databse) and trying to import it to a different environment called reporting environment ( non transactional databse) and getting a warning 'WFS GTP REPORT SINAPORE.eex:Access denied trying to modify the workbook with identifier 'WFS_GTP_REPORT_SINGAPORE'.
    It says Files Partially Imported so clicked on Finish to complete the import.
    The report has been imported under the user account but the sharing to the different responsibilities/Users has not been imported. I need to import the report with the sharing of the responsibilities/users as well.
    I do not have an option login into discoverer administratore using the user account, i can only login using the administator account ( i know loging in as the business user it self will allow you to import the sharing). But our DBA's oppse this is a security threat for the users as you are logging in as the user in production environment.
    Please help with this issue.

    I have the same problem, and I figured out that my windows is installed in french, and every users groups are created in french also, groups like Everyone don't exists and i can't change by console.
    Regards, Roberto Borges please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Parallel Refresh queries in a workbook with BI7.0

    Hi Experts,
    could somone tell me if is it possible to refresh IN PARALLEL all the queries in a workbook with 7.0 version? are there any differences from 3.5 Bex version from this point of view?
    This kind of option would be  very usefull for long run queries and/or big ammount of queries collected  in a workbook.
    I would be really grateful if you can give me link to documentation on this point.
    Thanks very much
    Best Regards
    Filippo Corvi

    Hi
    You are correct, if we put the big queries in a workbook it would be a performance issue.
    I have to check the option of refreshing the queries parallely.
    But you can try one option, the workbooks are also refreshed in Precalculation Server. If you can schedule that then the users would not have a problem.  May be I am wrong in this option. But it would be like refreshing the statistics before using them.
    If you can tryout, this is the help
    Note 936112 - Precalculation server help for troubleshooting
    Also this is one more option, but I had not tried out
    Schedule a Refresh of BEx Workbooks

  • Issue with Broadcasting and Publish query to Portal from query Designer

    Dear all,
    I have created a standard template ZWT_STANDARD_TEMPLATE in WAD and I have added this for Adhoc Analysis in 'Set Standard Web templated' RSCUSTV27.
    For Broadcasting I have added 0BROADCASTING_TEMPLATE70.
    I have problems with my broadcasting as well as publishing the Query in Portal.
    When I use a Broadcast to Email - it opens a new window with my standard template(ZWT_STANDARD_TEMPLATE ) I have added. No data though.
    Same thing happens for publishing too...When I publish the query to portal from Query Designer or WAD it takes me to the same window with my standard web template. No data though.
    I think both are related to the same issue. Its with broadcasting.
    What is the default template for Broadcasting in NW2004s? Below is the url I have included when I do it from Query designer. Its actually starting the Command - START_BROADCASTER70 but I dont know if it has to do a SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES. Could anyone compare it with your urls
    http://pgdep00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_QUERY=ZCOPA_C03_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
    This is the url for publishing from WAD
    http://fndef00:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_TEMPLATE=ZWT_FAST_PAYABLES&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
    Any help would be highly appreciated.
    Thanks,
    KK

    Hi KK,
    Did you solve your problem, i am also having the same issue. Please let me know if you have solved this issue.
    Thanks,
    Kumar

  • Workbook with 2 BEX queries

    Hi all!,
    I need to edit a new workbook with 2 querries.
    Mi issue is when I change the parameter selection of the workbook, the result area of the first query does not adat itself to the new result and so there is spaces betwwen the 1st and the second query.
    How can I define in the workbook to adapt automaticly the space for the query according to its result from the BEX?
    Thank;s a lot!
    Laurent.

    I use the Version 7

  • Poor Performance 7.0 Workbook with multiple queries

    Hi all,
    I've got the following issue. Our users have workbooks which contain serveral queries on different sheets. (One on each workbook sheet)
    When a workbook contains 5 or more queries, the overall workbook performance will decrease drastically. Workbook with 8 or more queries result in time-outs and messages like unsufficient shared memory.
    Does anyone have the same kind of problems with multiple queries in a Bex 7.0 workbook? Do any one have a solution?
    Any suggestions are welcome.
    Thanks!
    Cheers,
    Ron

    Bill,
    Tried to make a workbook according to your advise. It certainly makes a difference in workbook size. The new workbook is 50% smaller than the older version based on the standard SAP template.
    However, my workbook contains 17 queries, and after 5 minutes it breaks the BW connection. So basic conclusion is that BW 7.0 workbook can't work with a large number of dataproviders/ queries.  This did work in BEx BW 3.x.
    If any one has any other suggestion, more than welcome.
    Cheers,
    Ron

  • Workbook with multiple queries on multiple tabs

    Scenario: There is a workbook with multiple queries on multiple tabs.
    In 3.x, it was possible to refresh only a select query within the WB but I'm not finding this to be the case in the NW04s BEx Analyzer. It seems that it will always refresh all queries on all tabs.
    Do any of you know a way around this?

    Hi Bigtoja (and others).
    This is not possible in BI/2004s.
    Please refer to https://websmp106.sap-ag.de/~sapidb/011000358700004483762006E page 23. It seems that it will be implemented in a stack sometime in 2008.
    BR
    Stefan

Maybe you are looking for