Distribution Planning for 11.5.10.2
Hello,
I have a customer that is in the release 11.5.10.2 CU and they would like to have the Distribution Planning functionalities available in the R12.
By looking into the available responsibilities in this 11.5.10.2 CU instance I found a Distribution Planning and it looks like the one for R12.
The questions are:
1) Do we have available in 11.5.10.2 CU a Dist. Planning that has the same functionalities of R12?
2) if yes, does Oracle support Dist. Planning in 11.5.10.2 CU?
Many thanks for any response,
Alberto
Hi Alberto. Yes, ASCP supports planning for distribution in 11.5.10, but no this does not mean it has all the same functionalty as Release 12. We added a significant amount of new capabilities for Distribution Planning in Release 12
Scott
Similar Messages
-
How to use Distribution Key for planning workforce
Hi,
I have an activity named "Activity1":
Start date = ST = 01/01/2008
End date = ST + 10
Work = 120H
Duration = 10day
Activity type = Labor
I want to assign workers into the activity as follows:
01/01/2008: 10H
02/01/2008: 20H
03/01/2008: 30H
04/01/2008: 40H
04/01/2008 - 10/01/2008: 12H
So I maintained a Distribution Function in IMG as below:
% Duration % Req.
0 9%
10 18%
30 27%
40 36%
50 10%
And maintain the distribution Strategy in:
SPRO-->PS->Resources->Distribution->Define distribution strategy.
And maintain Req. distribution in:
SPRO-->PS->Resources->Distribution->Define requirement distribution.
Finally maintain this distribution key for the activity in "DistKeyCapRqInt" in internal tab .
My question:
What are the next steps for planning workers?
Which transaction is used to execute and monitor the task as plan?
Thanks
Long"How to split sender data to reciever such tht the distribution should be done on the actual costs of each reciever. how to formulate the rule for reciever?" :
In the segment header : use receiver rule 1 "variable portions" + variable portion type with rule 1 "actual costs". These parameters are confirmed in the receiving tracking factor page.
Then go in the "receiving wighting factors" just for a check of factor per fields. All the lines have the value 100. It's absolutely OK, don't modify it.
One thing to notice: if you use this rule, all the receiver must have a value, in the contrary a distribution based upon receiver actual cost can't run.
"In our company GST for all documents goes to a particular cost center 'X'. Now they want to distribute the GST to the respective cost centers from which it is actually incurred.I tried using SKF with '%' as unit measure but then it's distributing the costs equally to all recievers. How to solve this?":
did you change the percentages of each receveirs in the receiving tracking factor page?
hope it's helpful
Pascal -
Multiple Executions Plans for the same SQL statement
Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.
Below is the awrsqrpt's output for your reference.
WORKLOAD REPOSITORY SQL Report
Snapshot Period Summary
DB Name DB Id Instance Inst Num Release RAC Host
TESTDB 2157605839 TESTDB1 1 10.2.0.3.0 YES testhost1
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 32541 11-Oct-08 21:00:13 248 141.1
End Snap: 32542 11-Oct-08 21:15:06 245 143.4
Elapsed: 14.88 (mins)
DB Time: 12.18 (mins)
SQL Summary DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
Elapsed
SQL Id Time (ms)
51szt7b736bmg 25,131
Module: SQL*Plus
UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(ACCT_DR_BAL,
0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND TEST_ACC_NB = ACCT_ACC_NB(+)) WHERE
TEST_BATCH_DT = (:B1 )
SQL ID: 51szt7b736bmg DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> 1st Capture and Last Capture Snap IDs
refer to Snapshot IDs witin the snapshot range
-> UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL,0) + NVL(AC...
Plan Hash Total Elapsed 1st Capture Last Capture
# Value Time(ms) Executions Snap ID Snap ID
1 2960830398 25,131 1 32542 32542
2 3834848140 0 0 32542 32542
Plan 1(PHV: 2960830398)
Plan Statistics DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 25,131 25,130.7 3.4
CPU Time (ms) 23,270 23,270.2 3.9
Executions 1 N/A N/A
Buffer Gets 2,626,166 2,626,166.0 14.6
Disk Reads 305 305.0 0.3
Parse Calls 1 1.0 0.0
Rows 371,735 371,735.0 N/A
User I/O Wait Time (ms) 564 N/A N/A
Cluster Wait Time (ms) 0 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 0 N/A N/A
Invalidations 0 N/A N/A
Version Count 2 N/A N/A
Sharable Mem(KB) 26 N/A N/A
Execution Plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | UPDATE STATEMENT | | | | 1110 (100)| |
| 1 | UPDATE | TEST | | | | |
| 2 | TABLE ACCESS FULL | TEST | 116K| 2740K| 1110 (2)| 00:00:14 |
| 3 | TABLE ACCESS BY INDEX ROWID| ACCT | 1 | 26 | 5 (0)| 00:00:01 |
| 4 | INDEX RANGE SCAN | ACCT_DT_ACC_IDX | 1 | | 4 (0)| 00:00:01 |
Plan 2(PHV: 3834848140)
Plan Statistics DB/Inst: TESTDB/TESTDB1 Snaps: 32541-32542
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
Stat Name Statement Per Execution % Snap
Elapsed Time (ms) 0 N/A 0.0
CPU Time (ms) 0 N/A 0.0
Executions 0 N/A N/A
Buffer Gets 0 N/A 0.0
Disk Reads 0 N/A 0.0
Parse Calls 0 N/A 0.0
Rows 0 N/A N/A
User I/O Wait Time (ms) 0 N/A N/A
Cluster Wait Time (ms) 0 N/A N/A
Application Wait Time (ms) 0 N/A N/A
Concurrency Wait Time (ms) 0 N/A N/A
Invalidations 0 N/A N/A
Version Count 2 N/A N/A
Sharable Mem(KB) 26 N/A N/A
Execution Plan
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | UPDATE STATEMENT | | | | 2 (100)| |
| 1 | UPDATE | TEST | | | | |
| 2 | TABLE ACCESS BY INDEX ROWID| TEST | 1 | 28 | 2 (0)| 00:00:01 |
| 3 | INDEX RANGE SCAN | TEST_DT_IND | 1 | | 1 (0)| 00:00:01 |
| 4 | TABLE ACCESS BY INDEX ROWID| ACCT | 1 | 26 | 4 (0)| 00:00:01 |
| 5 | INDEX RANGE SCAN | INDX_ACCT_DT | 1 | | 3 (0)| 00:00:01 |
Full SQL Text
SQL ID SQL Text
51szt7b736bm UPDATE TEST SET TEST_TRN_DAY_CL = (SELECT (NVL(ACCT_CR_BAL, 0) +
NVL(ACCT_DR_BAL, 0)) FROM ACCT WHERE ACCT_TRN_DT = (:B1 ) AND PB
RN_ACC_NB = ACCT_ACC_NB(+)) WHERE TEST_BATCH_DT = (:B1 )Your input is highly appreciated.
Thanks for taking your time in answering my question.
RegardsOracle Lover3 wrote:
Dear experts,
awrsqrpt.sql is showing multiple executions plans for a single SQL statement. How is it possible that one SQL statement will have multiple Executions Plans within the same AWR report.If you're using bind variables and you've histograms on your columns which can be created by default in 10g due to the "SIZE AUTO" default "method_opt" parameter of DBMS_STATS.GATHER__STATS it is quite normal that you get different execution plans for the same SQL statement. Depending on the values passed when the statement is hard parsed (this feature is called "bind variable peeking" and enabled by default since 9i) an execution plan is determined and re-used for all further executions of the same "shared" SQL statement.
If now your statement ages out of the shared pool or is invalidated due to some DDL or statistics gathering activity it will be re-parsed and again the values passed in that particular moment will determine the execution plan. If you have skewed data distribution and a histogram in place that reflects that skewness you might get different execution plans depending on the actual values used.
Since this "flip-flop" behaviour can sometimes be counter-productive if you're unlucky and the values used to hard parse the statement leading to a plan that is unsuitable for the majority of values used afterwards, 11g introduced the "adaptive" cursor sharing that attempts to detect such a situation and can automatically re-evaluate the execution plan of the statement.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
Issue setting up PXE Enabled Distribution point for SCCM 2012.
I'm trying to set up SCCM 2012 in my Lab Enviroment in order to plan for implmentation to production.
I have installed and Configure one Primary site which has a working DP role width PXE /WDS.
And i am able to successfully do and OS Deployment.
I want to setup an additional Distribution point with PXE, to simulate a branch Office.
Installation of the second Distribution point looks to be succesfull, but i'm not able to boot on PXE.
It allways gives me the error messeage "The Windows Boot Configuration Data file does not contain a vaild OS entry
The same error messeage is given before i distributed the boot images (both x86 and x64)
So my thougts are that he WDS dosn't find the bootable images somehow.
I can see that the images are added to the RemoteInstall\SMSImages directory, but i also see the following in smsdpprov.log
[83C][Mon 04/23/2012 15:43:26]:Conent 'PS100004.7' for package 'PS100004' has been added to content library successfully
[83C][Mon 04/23/2012 15:43:26]:Expanding \\?\E:\SCCMContentLib\FileLib\4ABE\4ABEBA3BB557A810CBCC8148BC70FE01349142EB1BCF1C1154216B77E3E22495 from package PS100004
[83C][Mon 04/23/2012 15:43:26]:Finding Wimgapi.Dll
[83C][Mon 04/23/2012 15:43:26]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:43:26]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:43:26]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:43:26]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:43:26]:Found C:\Windows\system32\wimgapi.dll
[83C][Mon 04/23/2012 15:43:26]:Expanding PS100004 to E:\RemoteInstall\SMSImages
[83C][Mon 04/23/2012 15:44:48]:Registry key creation successfull
[83C][Mon 04/23/2012 15:44:48]:Registry key creation successfull
[83C][Mon 04/23/2012 15:44:49]:Registry key creation successfull
[83C][Mon 04/23/2012 15:45:23]:Conent 'PS100001.5' for package 'PS100001' has been added to content library successfully
[83C][Mon 04/23/2012 15:45:23]:Expanding \\?\E:\SCCMContentLib\FileLib\5EFD\5EFD89A7C52739DC815393C586861AFB6664FD4F28726758D6A151722D160031 from package PS100001
[83C][Mon 04/23/2012 15:45:23]:Finding Wimgapi.Dll
[83C][Mon 04/23/2012 15:45:23]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:45:23]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:45:23]:MsiEnumRelatedProducts failed
[83C][Mon 04/23/2012 15:45:23]:FindProduct failed; 0x80070103
[83C][Mon 04/23/2012 15:45:23]:Found C:\Windows\system32\wimgapi.dll
[83C][Mon 04/23/2012 15:45:23]:Expanding PS100001 to E:\RemoteInstall\SMSImages
Server is a clean installed Windows 2008 R2, only added to domain, added the primary SCCM server account as local Admin, added WDS Role and configured RemoteFolder before adding DP role from the SCCM Console. (So SCCM has installed and Configured IIS)Looks like i have found the answer at least i have got it to work.
Once i install .Net Framework 3.5.1 Feature on the server, i was able to boot succesfully into SCCM Task Sequence Wizard.
I also was successfull installing the the PXE DP role from the console succesfully without having to install WDS first.
So i guess that .Net Framework 3.5.1 is required for PXE DP role on Windows 2008 R2. (but i can't see that mentioned anywhere here http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SiteSystemRolePrereqs) -
Distribution Planning within SAP - APO 3.0 or SCM 4.0
Hi,
Can do any 'Distribution Planning' within SAP SCM V4.0 or V5.0.
We are trying to improve 'decision-making' associated with selection of a particular warehouse for shipments coming out of a specific plant. The application should be able to produce a recommended set of shipments by week from each plant. Critical inputs that go into the process will be (a) Procurement Forecast; (b) Production Forecast; (c) Warehouse Space; (d) Production Plan etc
Can this be done utilizing SAP APO 3.0, SCM 4.0 or SCM 5.0?
ThanksHi Tushar,
APO 3.0, SCM 4.0 nd SCM 5.0 all provide replenishment, distribution and deployement along with basic transportation planning functionalities wihin SNP (Suppluy Network Module) of APO. With SCM 5.0 you get other applications (along with APO) like EWM (Extended Warehouse Management) and better transportation planning features.
Moreover it makes sense to go in for the lastest version of the solution to get the latest set of features. Please check on help.sap.com under my SAP Business Suite >> SCM >> APO >> SNP or http://www.sap.com/solutions/business-suite/scm/featuresfunctions/index.epx for more details.
Thanks,
Somnath -
Transaction to maintina Billing Plan for Sales order item
Hi All,
Is there any transaction other than VA01/VA02 to maintian Billing plan for Sales order item.
Thanks & Regards,
Rajanidhi Rajasekeran.It is possible to maintain Billing Plan in Sales Document Type (VOV8), as well as Item Category level (VOV7). As you want it at Item level, maintain the same in Item Category Configuration at Item level & it will by default be captured in Sales Order at Item level.
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Regards,
Rajesh Banka -
CBO generating different plans for the same data in similar Environments
Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1 COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 3607425 167760 5/02/2013 22:11
METER_CONFIG_HEADER 3658 80 5/01/2013 0:07
METER_CONFIG_ITEM 32310 496 5/01/2013 0:07
NMI 1899024 33557 18/02/2013 10:55
REGISTER 4830153 101504 18/02/2013 9:57
SDP_LOGICAL_ASSET 1607456 19137 18/02/2013 15:48
SDP_LOGICAL_REGISTER 5110781 78691 18/02/2013 9:56
SERVICE_DELIVERY_POINT 1425890 42468 18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 4133939 198570 16/02/2013 10:02
METER_CONFIG_HEADER 3779 80 16/02/2013 10:55
METER_CONFIG_ITEM 33720 510 16/02/2013 10:55
NMI 1969000 33113 16/02/2013 10:58
REGISTER 5837874 120104 16/02/2013 11:05
SDP_LOGICAL_ASSET 1788152 22325 16/02/2013 11:06
SDP_LOGICAL_REGISTER 6101934 91088 16/02/2013 11:07
SERVICE_DELIVERY_POINT 1447589 43804 16/02/2013 11:11
TEST ITEM 2 COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 9878 67 147 12982 869801 3553095
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 7291 2747 2 639 1755977 3597916
ASSET SYS_C00102592 UNIQUE 2 12488 3733831 1 1 3726639 3733831
METER_CONFIG_HEADER SYS_C0092052 UNIQUE 1 12 3670 1 1 3590 3670
METER_CONFIG_ITEM SYS_C0092074 UNIQUE 1 104 32310 1 1 32132 32310
NMI IDX_NMI_ID NONUNIQUE 2 6298 844853 1 2 1964769 1965029
NMI IDX_NMI_ID_NK NONUNIQUE 2 6701 1923072 1 1 1922831 1923084
NMI IDX_NMI_STATS NONUNIQUE 1 106 4 26 52 211 211
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 12498 795 15 2899 2304831 4711808
REGISTER SYS_C00102653 UNIQUE 2 16942 5065660 1 1 5056855 5065660
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 3667 1607968 1 1 1607689 1607982
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 3811 668727 1 2 1606204 1607982
SDP_LOGICAL_ASSET SYS_C00102665 UNIQUE 2 5116 1529606 1 1 1528136 1529606
SDP_LOGICAL_REGISTER SYS_C00102677 UNIQUE 2 17370 5193638 1 1 5193623 5193638
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 4406 676523 1 2 1423247 1425890
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 7374 676523 1 2 1458238 1461108
SERVICE_DELIVERY_POINT SYS_C00102687 UNIQUE 2 4737 1416207 1 1 1415022 1416207
ENVIRONMENT B
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 8606 121 71 16428 1987833 4162257
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 8432 1780146 1 1 2048170 4162257
ASSET SYS_C00116157 UNIQUE 2 13597 4162263 1 1 4158759 4162263
METER_CONFIG_HEADER SYS_C00116570 UNIQUE 1 12 3779 1 1 3734 3779
METER_CONFIG_ITEM SYS_C00116592 UNIQUE 1 107 33720 1 1 33459 33720
NMI IDX_NMI_ID NONUNIQUE 2 6319 683370 1 2 1970460 1971313
NMI IDX_NMI_ID_NK NONUNIQUE 2 6597 1971293 1 1 1970771 1971313
NMI IDX_NMI_STATS NONUNIQUE 1 98 48 2 4 196 196
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 15615 1273 12 2109 2685924 5886582
REGISTER SYS_C00116748 UNIQUE 2 19533 5886582 1 1 5845565 5886582
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 4111 1795084 1 1 1758441 1795130
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 4003 674249 1 2 1787987 1795130
SDP_LOGICAL_ASSET SYS_C004520 UNIQUE 2 5864 1795130 1 1 1782147 1795130
SDP_LOGICAL_REGISTER SYS_C004539 UNIQUE 2 20413 6152850 1 1 6073059 6152850
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 3227 660649 1 2 1422572 1447803
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 6399 646257 1 2 1346948 1349993
SERVICE_DELIVERY_POINT SYS_C00128706 UNIQUE 2 4643 1447946 1 1 1442796 1447946
TEST ITEM 3 COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 13 | 2067 | | 135K (2)| 00:27:05 |
| 1 | HASH UNIQUE | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 2 | HASH JOIN | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 3 | HASH JOIN | | 6 | 900 | | 135K (2)| 00:27:04 |
|* 4 | HASH JOIN ANTI | | 1 | 137 | | 135K (2)| 00:27:03 |
|* 5 | TABLE ACCESS BY INDEX ROWID| NMI | 1 | 22 | | 5 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | | 95137 (2)| 00:19:02 |
|* 7 | HASH JOIN | | 1 | 109 | | 95132 (2)| 00:19:02 |
|* 8 | TABLE ACCESS FULL | ASSET | 36074 | 1021K| | 38553 (2)| 00:07:43 |
|* 9 | HASH JOIN | | 90361 | 7059K| 4040K| 56578 (2)| 00:11:19 |
|* 10 | HASH JOIN | | 52977 | 3414K| 2248K| 50654 (2)| 00:10:08 |
|* 11 | HASH JOIN | | 39674 | 1782K| | 40101 (2)| 00:08:02 |
|* 12 | TABLE ACCESS FULL | REGISTER | 39439 | 1232K| | 22584 (2)| 00:04:32 |
|* 13 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 675K| 12M| | 9412 (2)| 00:01:53 |
|* 15 | TABLE ACCESS FULL | SDP_LOGICAL_ASSET | 1178K| 15M| | 4262 (2)| 00:00:52 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | | 2 (0)| 00:00:01 |
| 17 | VIEW | | 39674 | 232K| | 40101 (2)| 00:08:02 |
|* 18 | HASH JOIN | | 39674 | 1046K| | 40101 (2)| 00:08:02 |
|* 19 | TABLE ACCESS FULL | REGISTER | 39439 | 500K| | 22584 (2)| 00:04:32 |
|* 20 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 21 | TABLE ACCESS FULL | METER_CONFIG_HEADER | 3658 | 47554 | | 19 (0)| 00:00:01 |
|* 22 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 7590 | 68310 | | 112 (2)| 00:00:02 |
Predicate Information (identified by operation id):
2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
8 - filter("ROW_CURRENT_IND"='Y')
9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 181 | 103K (2)| 00:20:47 |
| 1 | HASH UNIQUE | | 1 | 181 | 103K (2)| 00:20:47 |
|* 2 | HASH JOIN ANTI | | 1 | 181 | 103K (2)| 00:20:47 |
|* 3 | HASH JOIN | | 1 | 176 | 56855 (2)| 00:11:23 |
|* 4 | HASH JOIN | | 1 | 163 | 36577 (2)| 00:07:19 |
|* 5 | TABLE ACCESS BY INDEX ROWID | ASSET | 1 | 44 | 4 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | 9834 (2)| 00:01:59 |
| 7 | NESTED LOOPS | | 1 | 87 | 9830 (2)| 00:01:58 |
| 8 | NESTED LOOPS | | 1 | 74 | 9825 (2)| 00:01:58 |
|* 9 | HASH JOIN | | 1 | 52 | 9820 (2)| 00:01:58 |
|* 10 | TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER | 1 | 14 | 1 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 33 | 116 (2)| 00:00:02 |
|* 12 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 1 | 19 | 115 (2)| 00:00:02 |
|* 13 | INDEX RANGE SCAN | SYS_C00116570 | 1 | | 1 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 723K| 13M| 9699 (2)| 00:01:57 |
|* 15 | TABLE ACCESS BY INDEX ROWID | NMI | 1 | 22 | 5 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | 2 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET | 1 | 13 | 5 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | IDX_SLA_SDP_SK | 2 | | 2 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | IDX_A_SAPINTLOGDEV_SK | 2 | | 2 (0)| 00:00:01 |
|* 20 | TABLE ACCESS FULL | REGISTER | 76113 | 2378K| 26743 (2)| 00:05:21 |
|* 21 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
| 22 | VIEW | | 90889 | 443K| 47021 (2)| 00:09:25 |
|* 23 | HASH JOIN | | 90889 | 2307K| 47021 (2)| 00:09:25 |
|* 24 | TABLE ACCESS FULL | REGISTER | 76113 | 966K| 26743 (2)| 00:05:21 |
|* 25 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
Predicate Information (identified by operation id):
2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
"SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
4 - access("ASSET_CD"="EQUIP_CD")
5 - filter("ROW_CURRENT_IND"='Y')
9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PMHi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS NULL COMPLETED
SYSSTATS_INFO DSTART NULL 02-16-2011 15:24
SYSSTATS_INFO DSTOP NULL 02-16-2011 15:24
SYSSTATS_INFO FLAGS 1 NULL
SYSSTATS_MAIN CPUSPEEDNW 1321.20523 NULL
SYSSTATS_MAIN IOSEEKTIM 10 NULL
SYSSTATS_MAIN IOTFRSPEED 4096 NULL
SYSSTATS_MAIN SREADTIM NULL NULL
SYSSTATS_MAIN MREADTIM NULL NULL
SYSSTATS_MAIN CPUSPEED NULL NULL
SYSSTATS_MAIN MBRC NULL NULL
SYSSTATS_MAIN MAXTHR NULL NULL
SYSSTATS_MAIN SLAVETHR NULL NULL -
Plans for Small Pull Out Keyboard?
Hi,
Are there any plans for a pull out keyboard?
Best Wishes,
Alyssa.We're just users like you but it's doubtful that Apple is going to ruin the sleek lines of the phone by adding a slide out keyboard.
-
hi, i am a littl confused as I logged into creative cloud and bough the in design plan for a year but i cant seem to donwload it... there is a window that pops up and it says its downloading but its taking forever? any advice?
Hi Dima,
Please refer to the help documents below:
Troubleshoot Creative Cloud download and install issues
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena -
MRP not considering open purchase orders when planning for open sales order
Dear Experts,
1.I have open sales orders as well as planned Independent requirements for finished goods for the current month. Also I have open puchase orders for raw materials which is part of the Bill of material of the finished goods for the current month.
Please what do i need to do to make MRP consider my open purchase orders when the system is planning for the open sales orders.
2 what tcode can I use to delete all purchase reuisitions in the sytemThere was no response to these questions so i had to close it to make space for another
-
Daily production plan for operations
Hi, One Production order generally runs for more than 1 month and consist of more than 100 operations and order qty will be one. in this case we want to prepare daily prod plan for operations not for qty. say on 1.6.09 we will do cutting operation, 2.06.09 willdo painting etc in monthly prod paln or weekly prod plan? pls guide how to map this?
Dear,
In production order you will get the details of operation plan and scheduling.
So in OPK8 do the setting for print of LG02 Op. control ticket, LG03 Job Ticket, LV01Time ticket,
Take a print through CO04N - Print and sent it on shop floor also.
You use the report like MCPW - Lead times or MCPK.
Hope clear to you.
Regards,
R.Brahmankar -
DAC Execution plan for financial analytics keeps running (OBIA 7.9.4)
Hi Gurus,
I have problem when tried to run full load on financial analytics execution plan. I used OBIA 7.9.4, Informatica 8.6.1 and DAC 10.1.3.4.1.patch.20100901.0520. This runs on Windows Server 2008 Service Pack 2 with 6 GB of memory. I set $$INITIAL_EXTRACT_DATE='01/01/2011' so it should pull data greater than $$INITIAL_EXTRACT_DATE, which I believed not more than 3 years data and should be not more than 2 days for loading this data. But execution plan keeps running and not yet completed even after more than 2 days. I have already checked for DAC execution plan log, But nothing I can found from the log.
Here is the log file:
12 INFO Thu Jun 27 13:52:12 SGT 2013 DAC Version: Dac Build AN 10.1.3.4.1.patch.20100901.0520
13 INFO Thu Jun 27 13:52:12 SGT 2013 The System properties are: java.runtime.name Java(TM) SE Runtime Environment
sun.boot.library.path C:\orahome\10gR3_1\jdk\jre\bin
java.vm.version 10.0-b23
java.vm.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
path.separator ;
ETL_EXECUTION_MODE ETL_SERVER
java.vm.name Java HotSpot(TM) Server VM
file.encoding.pkg sun.io
sun.java.launcher SUN_STANDARD
user.country US
sun.os.patch.level Service Pack 2
java.vm.specification.name Java Virtual Machine Specification
user.dir C:\orahome\10gR3_1\bifoundation\dac
java.runtime.version 1.6.0_07-b06
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs C:\orahome\10gR3_1\jdk\jre\lib\endorsed
os.arch x86
java.io.tmpdir C:\Users\ADMINI~1\AppData\Local\Temp\2\
line.separator
java.vm.specification.vendor Sun Microsystems Inc.
user.variant
os.name Windows Server 2008
REPOSITORY_STAMP 4E8A758D24E553DBB74B325E89718660
sun.jnu.encoding Cp1252
java.library.path C:\orahome\10gR3_1\jdk\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Informatica\PowerCenter8.6.1\server\bin;C:\OracleBI\server\Bin;C:\OracleBI\web\bin;C:\OracleBI\web\catalogmanager;C:\OracleBI\SQLAnywhere;C:\Program Files (x86)\Java\jdk1.5.0_22\bin;C:\app\oracle\product\11.2.0\dbhome_1\bin;C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\OmniBack\bin\;C:\Windows\System32\WindowsPowerShell\v1.0\
java.specification.name Java Platform API Specification
java.class.version 50.0
sun.management.compiler HotSpot Tiered Compilers
os.version 6.0
user.home C:\Users\Administrator
user.timezone Asia/Singapore
java.awt.printerjob sun.awt.windows.WPrinterJob
file.encoding Cp1252
java.specification.version 1.6
java.class.path .\lib\msbase.jar;.\lib\mssqlserver.jar;.\lib\msutil.jar;.\lib\sqljdbc.jar;.\lib\ojdbc6.jar;.\lib\ojdbc5.jar;.\lib\ojdbc14.jar;.\lib\db2java.zip;.\lib\terajdbc4.jar;.\lib\log4j.jar;.\lib\teradata.jar;.\lib\tdgssjava.jar;.\lib\tdgssconfig.jar;.\DAWSystem.jar;.;
user.name Administrator
java.vm.specification.version 1.0
java.home C:\orahome\10gR3_1\jdk\jre
sun.arch.data.model 32
user.language en
java.specification.vendor Sun Microsystems Inc.
awt.toolkit sun.awt.windows.WToolkit
java.vm.info mixed mode
java.version 1.6.0_07
java.ext.dirs C:\orahome\10gR3_1\jdk\jre\lib\ext;C:\Windows\Sun\Java\lib\ext
sun.boot.class.path C:\orahome\10gR3_1\jdk\jre\lib\resources.jar;C:\orahome\10gR3_1\jdk\jre\lib\rt.jar;C:\orahome\10gR3_1\jdk\jre\lib\sunrsasign.jar;C:\orahome\10gR3_1\jdk\jre\lib\jsse.jar;C:\orahome\10gR3_1\jdk\jre\lib\jce.jar;C:\orahome\10gR3_1\jdk\jre\lib\charsets.jar;C:\orahome\10gR3_1\jdk\jre\classes
java.vendor Sun Microsystems Inc.
file.separator \
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding UnicodeLittle
sun.cpu.endian little
sun.desktop windows
sun.cpu.isalist pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
14 SEVERE Thu Jun 27 13:52:12 SGT 2013
START OF ETL
15 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.InformaticaTask
16 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.InformaticaTask
17 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.PauseTask
18 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.PauseTask
19 SEVERE Thu Jun 27 13:52:40 SGT 2013 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.TaskPrecedingActionScriptTask
20 SEVERE Thu Jun 27 13:52:40 SGT 2013 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.TaskPrecedingActionScriptTask
21 SEVERE Thu Jun 27 13:52:46 SGT 2013 Starting ETL Process.
22 SEVERE Thu Jun 27 13:52:47 SGT 2013 Informatica Status Poll Interval new value : 20000(milli-seconds)
24 SEVERE Thu Jun 27 13:52:52 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\FLAT FILE specified is not a currently existing directory
25 SEVERE Thu Jun 27 13:52:52 SGT 2013 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
26 SEVERE Thu Jun 27 13:53:12 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
27 SEVERE Thu Jun 27 13:53:13 SGT 2013 Number of running sessions : 13
28 SEVERE Thu Jun 27 13:53:13 SGT 2013 Number of running sessions : 12
29 SEVERE Thu Jun 27 13:53:14 SGT 2013 Number of running sessions : 11
30 SEVERE Thu Jun 27 13:53:15 SGT 2013 Number of running sessions : 10
32 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\ORACLE specified is not a currently existing directory
33 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\Oracle specified is not a currently existing directory
34 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\oracle specified is not a currently existing directory
35 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\ORACLE (THIN) specified is not a currently existing directory
36 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
37 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
38 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
39 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
40 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
41 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
42 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
43 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
44 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
45 SEVERE Thu Jun 27 13:53:39 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
46 SEVERE Thu Jun 27 13:53:39 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
47 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
48 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
49 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
50 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
51 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
52 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
53 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
54 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 10
55 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 10
56 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 11
57 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 11
58 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 11
59 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
60 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
61 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
62 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
63 SEVERE Thu Jun 27 13:53:42 SGT 2013 Number of running sessions : 10
64 SEVERE Thu Jun 27 13:53:42 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GLBalanceFact_Full' has completed with error code 0
65 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
66 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
67 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
68 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_ARSubType_Extract' has completed with error code 0
69 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLRevenueTypeExtract' has completed with error code 0
70 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
71 SEVERE Thu Jun 27 13:53:47 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
72 SEVERE Thu Jun 27 13:53:47 SGT 2013 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
73 SEVERE Thu Jun 27 13:54:06 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
74 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
75 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
76 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLRevenueTypeExtract.txt SDE_ORA_Stage_TransactionTypeDimension_GLRevenueTypeExtract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
77 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_ARSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_ARSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
78 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
79 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
80 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 11
81 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 10
82 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 10
83 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 10
84 SEVERE Thu Jun 27 13:54:08 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
85 SEVERE Thu Jun 27 13:54:08 SGT 2013 Number of running sessions : 10
86 SEVERE Thu Jun 27 13:54:08 SGT 2013 Number of running sessions : 10
87 SEVERE Thu Jun 27 13:54:08 SGT 2013 Number of running sessions : 10
88 SEVERE Thu Jun 27 13:54:09 SGT 2013 Number of running sessions : 10
89 SEVERE Thu Jun 27 13:54:12 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
90 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTransactionFact_Payment_Full' has completed with error code 0
91 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_APType_Extract' has completed with error code 0
92 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTransactionFact_PaymentSchedule_Full' has completed with error code 0
93 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTransactionFact_Distributions_Full' has completed with error code 0
94 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLRevenueSubType_Extract' has completed with error code 0
95 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_APSubType_Extract' has completed with error code 0
96 SEVERE Thu Jun 27 13:54:14 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLCOGSSubType_Extract' has completed with error code 0
97 SEVERE Thu Jun 27 13:54:15 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
98 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTransactionFact_Payment_Full.txt SDE_ORA_APTransactionFact_Payment_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
99 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_APType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_APType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
100 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTransactionFact_PaymentSchedule_Full.txt SDE_ORA_APTransactionFact_PaymentSchedule_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
101 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTransactionFact_Distributions_Full.txt SDE_ORA_APTransactionFact_Distributions_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
102 SEVERE Thu Jun 27 13:54:34 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLRevenueSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_GLRevenueSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
103 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 12
104 SEVERE Thu Jun 27 13:54:34 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_APSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_APSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
105 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 11
106 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 10
107 SEVERE Thu Jun 27 13:54:34 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLCOGSSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_GLCOGSSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
108 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 11
109 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 10
110 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 10
111 SEVERE Thu Jun 27 13:54:35 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
112 SEVERE Thu Jun 27 13:54:36 SGT 2013 Number of running sessions : 10
113 SEVERE Thu Jun 27 13:54:36 SGT 2013 Number of running sessions : 9
114 SEVERE Thu Jun 27 13:54:36 SGT 2013 Number of running sessions : 8
115 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLCOGSType_Extract' has completed with error code 0
116 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_ExpenditureCategory' has completed with error code 0
117 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
118 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_ARType_Extract' has completed with error code 0
119 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_AP_LinkageInformation_Extract_Full' has completed with error code 0
120 SEVERE Thu Jun 27 13:54:41 SGT 2013 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
121 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLCOGSType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_GLCOGSType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
122 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_TransactionTypeDimension_ExpenditureCategory.txt SDE_ORA_TransactionTypeDimension_ExpenditureCategory
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
123 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_ARType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_ARType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
124 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
125 SEVERE Thu Jun 27 13:55:00 SGT 2013 Number of running sessions : 7
126 SEVERE Thu Jun 27 13:55:00 SGT 2013 Number of running sessions : 6
127 SEVERE Thu Jun 27 13:55:01 SGT 2013 Number of running sessions : 6
128 SEVERE Thu Jun 27 13:55:01 SGT 2013 Number of running sessions : 10
129 SEVERE Thu Jun 27 13:55:01 SGT 2013 Number of running sessions : 9
130 SEVERE Thu Jun 27 13:55:01 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
131 SEVERE Thu Jun 27 13:55:02 SGT 2013 Number of running sessions : 9
132 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_GLRevenueDerive' has completed with error code 0
133 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_APDerive' has completed with error code 0
134 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_GLOther' has completed with error code 0
135 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_ARSubType_ExtractApplication' has completed with error code 0
136 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_GLCOGSDerive' has completed with error code 0
137 SEVERE Thu Jun 27 13:55:08 SGT 2013 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
138 SEVERE Thu Jun 27 13:55:21 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_AP_LinkageInformation_Extract_Full.txt SDE_ORA_GL_AP_LinkageInformation_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
139 SEVERE Thu Jun 27 13:55:21 SGT 2013 Number of running sessions : 9
140 SEVERE Thu Jun 27 13:55:27 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_PO_LinkageInformation_Extract_Full' has completed with error code 0
141 SEVERE Thu Jun 27 13:55:27 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_ARSubType_ExtractApplication.txt SDE_ORA_Stage_TransactionTypeDimension_ARSubType_ExtractApplication
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
142 SEVERE Thu Jun 27 13:55:27 SGT 2013 Number of running sessions : 8
143 SEVERE Thu Jun 27 13:55:28 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
144 SEVERE Thu Jun 27 13:55:29 SGT 2013 Number of running sessions : 7
145 SEVERE Thu Jun 27 13:55:47 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_PO_LinkageInformation_Extract_Full.txt SDE_ORA_GL_PO_LinkageInformation_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
146 SEVERE Thu Jun 27 13:55:47 SGT 2013 Number of running sessions : 7
147 SEVERE Thu Jun 27 13:55:53 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
148 SEVERE Thu Jun 27 13:55:53 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
149 SEVERE Thu Jun 27 13:56:00 SGT 2013
ANOMALY INFO::: DataWarehouse:SELECT COUNT(*) FROM W_ORA_GLRF_DERV_F_TMP
ORA-00942: table or view does not exist
MESSAGE:::ORA-00942: table or view does not exist
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:194)
oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:853)
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1267)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1469)
oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:389)
com.siebel.etl.database.cancellable.CancellableStatement.executeQuery(CancellableStatement.java:69)
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:150)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.analytics.etl.etltask.CountTableTask.doExecute(CountTableTask.java:99)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
150 SEVERE Thu Jun 27 13:56:00 SGT 2013
ANOMALY INFO::: Error while executing : COUNT TABLE:W_ORA_GLRF_DERV_F_TMP
MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DataWarehouse:SELECT COUNT(*) FROM W_ORA_GLRF_DERV_F_TMP
ORA-00942: table or view does not exist
EXCEPTION CLASS::: java.lang.Exception
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:450)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::DataWarehouse:SELECT COUNT(*) FROM W_ORA_GLRF_DERV_F_TMP
ORA-00942: table or view does not exist
EXCEPTION CLASS::: com.siebel.etl.database.IllegalSQLQueryException
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:160)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.analytics.etl.etltask.CountTableTask.doExecute(CountTableTask.java:99)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::ORA-00942: table or view does not exist
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:194)
oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:853)
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1267)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1469)
oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:389)
com.siebel.etl.database.cancellable.CancellableStatement.executeQuery(CancellableStatement.java:69)
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:150)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.analytics.etl.etltask.CountTableTask.doExecute(CountTableTask.java:99)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
151 SEVERE Thu Jun 27 13:56:12 SGT 2013 Number of running sessions : 10
152 SEVERE Thu Jun 27 13:56:12 SGT 2013 Number of running sessions : 10
153 SEVERE Thu Jun 27 13:56:13 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
154 SEVERE Thu Jun 27 13:56:13 SGT 2013 Number of running sessions : 10
155 SEVERE Thu Jun 27 13:56:17 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTermsDimension_Full' has completed with error code 0
156 SEVERE Thu Jun 27 13:56:18 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
157 SEVERE Thu Jun 27 13:56:18 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_MovementTypeDimension' has completed with error code 0
158 SEVERE Thu Jun 27 13:56:18 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionSourceDimension_AP_LKP_Extract_Full' has completed with error code 0
159 SEVERE Thu Jun 27 13:56:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionSourceDimension_AP_CC_Extract' has completed with error code 0
160 SEVERE Thu Jun 27 13:56:38 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTermsDimension_Full.txt SDE_ORA_APTermsDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
161 SEVERE Thu Jun 27 13:56:38 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_PartyContactStaging_Full.txt SDE_ORA_PartyContactStaging_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
162 SEVERE Thu Jun 27 13:56:38 SGT 2013 Number of running sessions : 10
163 SEVERE Thu Jun 27 13:56:38 SGT 2013 Number of running sessions : 9
164 SEVERE Thu Jun 27 13:56:39 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_TransactionSourceDimension_AP_CC_Extract.txt SDE_ORA_TransactionSourceDimension_AP_CC_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
165 SEVERE Thu Jun 27 13:56:39 SGT 2013 Number of running sessions : 8
166 SEVERE Thu Jun 27 13:56:44 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_COGS_LinkageInformation_Extract_Full' has completed with error code 0
167 SEVERE Thu Jun 27 13:57:04 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_COGS_LinkageInformation_Extract_Full.txt SDE_ORA_GL_COGS_LinkageInformation_Extract_Full
Status Desc : Succeeded
After certain tasks I found Informatica workflow did not run. In my case after 190 of 403 tasks but sometime 183 of 403 tasks so it is intermittent.
This sample tasks that is still running.
SDE_ORA_EmployeeDimension
SDE_ORA_GeoCountryDimension
SDE_ORA_MovementTypeDimension
SDE_ORA_Project
SDE_ORA_StatusDimension_ProjectStatus
SDE_ORA_TransactionSourceDimension_AP_LKP_Extract
SDE_ORA_TransactionTypeDimension_APDerive
SDE_ORA_TransactionTypeDimension_GLCOGSDerive
In Informatica Monitor I found this
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
Is it mean something?
I have tried to bounce the server bounce the dac server and start ETL but problem still happen.
Did I miss something on DAC or Informatica configuration?
Thanks
JoniHi Naga,
NagarajuCool Jul 8, 2013 6:49 AM (in response to JonHi Naga
1)Check once Relational connections of workflow manager.
Same with tns name
2)Name should be same in workflow manager,ODBC and DAC client.
in DAC I set same with SID -->connection test successful
3)Have you mentioned custom properties in informatica integration service
overrideMpltVarwithMapVar Yes
4)stop infa services and copy pmcmd file from server to client and start sevrices.
Done
5)And check once all DAC configuration once.
Done
After applied above setting DAC Execution Plan for Financial Analytics still take long time. Anything I should try?
Thanks,
Joni
Branch
Report Abuse
Like (0)
Reply -
How to use Same Inspection plan for Multiple Plants?
Hello,
When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
Thanks
SAP Fans...Dear,
For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
Regards,
Prasobh -
Can you have one icloud storage plan for multiple devices
hi,
i'm wondering if there is a way of consolidation various icloud storage plans into one.
i only use my free 5gb for my 5s as i back up photos to my mac, however my wife has already upgraded her storage plan for her 5c to the £1/month.
with the new release of backing up your entire photo library on you mac (which im keen to do) im going to need to upgrade my own account as the mac is set up for my apple id.
i currently also pay for itunes match.
im keen to know if there is a way we can use one large back up facility for: my 5s, the mrs's 5c, the mac, with out paying for multiple storage plans.
im guessing the itunes match is stand alone but if i can have one payment for large storage and put everything there that would be ideal, and seem a reasonable request for most families.
any help greatly appreciated
thanks
ScottAccounts can't be merged.
-
I Went to the store to upgrade phones and get a new plan. They didn't have any of the three phones I was gettin, Tried to sell me a plan for 8 gigabyte, even though we don't even use 1 now. Left mad, manager watched and did nothing. Tried to call, I got mad when the customer service agent chuckled at me. I was pretty well done then. Wife tried, had it all worked, we were getting the arrangements as we wanted them. I even listened since it was on speaker phone, she was still talking as she left the house, the Verizon phone dropped the call, she called back and now they won't us the same deal they already agreed to. I told her I would try one last time. I explai this was my last call, at the end I found that my plan is paid through the 21st. What is really bad is that they don't even care enough to have a supervisor call. They won't even let me speak to one. I was willing to stay with them because in the past I had never had a problem with them, now I can see how they could be any worse.
Kccustomer wrote:
mrhelper, you sure are knowledgeable about Verizon, the $30 fee is the cost to upgrade one of my phone. I feel that this is unreasonable since I do not have a contract and a new customer does not have to pay that.
The only time you pay the upgrade fee is if you take a subsidized discount on a phone and that does in fact require a contract. new customers have to pay a $35 activation fee.
As far as me being knowledgeable this fee has been in place for 2 1/2 and was announced on every major news source and is CLEARLY labeled on each phone in the stores and online. In fact my local store has a huge sign right at the counter stating that all upgrades are assessed a $30 upgrade fee. So know it doesn't take a lot of knowledge to know this fee exists.
Maybe you are looking for
-
Error while checking in and storing
Dear All I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message Error while checking in and storing Message no. 26253 What may be the issues, even my my repositories working fine ( configured
-
How to call a JSP page from Applications menu?
Hi partners, I am still looking for "how to call a JSP page from Applications menu?", I mean instead of calling a form, I want to call a JSP page which is staying in a OC4J repository which is located in another server. Any idea will be really apprec
-
2004S MiniSAP ABAP: SAPGUI crashes when creating a Web Service
I have installed the NW2004S ABAP Preview System from SDN on a VMWare Image (Windows XP, 1.7 GB Mem). No problems during the install. Also I was able to run the sample Web Dynpro Quiz Application. However when try to create a Web Service the SAP GUi
-
Error when launching Workflow Editor
Hi gurus, I am expriencing an error when i try to launch the Workflow editor from the Workflow definition page (Actions -> Launch Workflow editor). The error is: Unable to load resource: http://jawe.enhydra.org/twe.jnlp I have the latest JRE installe
-
Problem during printing smartforms
Hi, We are using Epson 9 pin printer for printing. We have custom page layout used in our sap script and smartforms with size 12 inch / 9 inch (80 column dot matrix printing). We are using SWIN (windows default printing) driver. Problem we are facing