Distribution Point IIS Config - Multiple applications using Default Web Site

Hi all,
I've having some problems with a distribution point, when trying to download content I'm getting the following error in the datatransferservices.log:
Error sending DAV request. HTTP code 500, status 'Internal Server Error'
Looking at IIS, I can see that another application (uniflow print server) has published folders under the Default Web Site.
Reading
similar errors it appears it may be to do with ISAPI filters being configured by the other application. Unfortunately these filters are required by the Uniflow application. So, my question is:
Is there any way to change the web site used by the distribution point?
Thanks,
Iain

Not on a one off basis, no. The web sites are tied to ports which means you would also have to change the port. Both are global changes. The better solution is to not multi-purpose a DP.
Jason | http://blog.configmgrftw.com

Similar Messages

WcmUrl - Use default Web site section metadata

We are generating links using links wizard and using "Use default Web site section metadata" option.
We are expecting hyperlinked content file displays in the Web site section as currently specified in the Web Site
Section metadata field for the content file.
Link wizard is generating following link.
[!--$wcmUrl(’link’,’10024’)--]
From the primary page of section 1 and doing mouse over on a secondary page link of section 2. It is generating URL with section 2.
Issue:
From the secondary page of section 1 and doing mouse over on a secondary page link of section 2. It is generating URL with section 1.
Expected:
From the secondary page of section 1 and doing mouse over on a secondary page link of section 2. It should generate URL with section 2.

I found my answer in this post: Dynamic Query in Element Definition
Verified that it works even for 11g

Deploying no java applications using Java Web Start

Hi,
I am new to java web start. Is it possible to distribute non java applications using java web start. I have an APP which can run on a desktop in standalone mode. The app has jusy HTML and Java script files. Is it possible to package this app and deploying using java web start? I am assuming If it is possible, I can make updates to the packaged app in the web servers and the updates will be downloaded next time the app is used provided configurations are correct?
thx

The app has jusy HTML and Java script files. Is it possible
to package this app and deploying using java web start? Not really. Resources for JWS need to be zipped,
while this HTML/JS app. will (I guess) not work from
inside the depths of a Jar (or Zip) archive.
Note that you can organise for those files to be
downloaded and expanded onto a known place
on the user's disk, by using an 'installer' element,
but..
...I am assuming If it is possible, I can make updates to the
packaged app in the web servers and the updates ..installers are only called once, and do not 'update'.

Cannot start default web site

I was being a nice husband and moving my wife to a new machine while she is in India on business. I went to join the machine using the connector and the connector install failed. During the troubleshooting of this issue I installed patches and rebooted.
I do not often patch so there were a few. Upon reboot I am unable to start the default website. I get the error This website cannot be started. Another website may be using the same port. I also did a netstat –o to see if anything was running on port 80. Can
anyone assist me?
C:\Users\Administrator>netstat -o
Active Connections
Proto Local Address Foreign Address State PID
TCP 10.0.0.114:389 whs:61103 ESTABLISHED 516
TCP 10.0.0.114:445 10.0.0.88:55375 ESTABLISHED 4
TCP 10.0.0.114:445 10.0.0.118:49169 ESTABLISHED 4
TCP 10.0.0.114:3389 10.0.0.118:54357 ESTABLISHED 3260
TCP 10.0.0.114:6602 10.0.0.88:51644 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.88:51656 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.118:49159 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.118:49163 ESTABLISHED 1696
TCP 10.0.0.114:61103 whs:ldap ESTABLISHED 3268
TCP 127.0.0.1:49175 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49177 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49178 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49179 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49191 whs:65532 ESTABLISHED 3204
TCP 127.0.0.1:49193 whs:65532 ESTABLISHED 3204

Hi,
What's your mean of "cannot start default web site"？
If you mean that the client can't access the website, please follow the troubleshooting steps below:
Please try to ping an external IP address. If timeout occurs, this is a connectivity issue. You need to check the IP address, netmask, gateway, DNS.
Please try to run nslookup www.microsoft.com. If this website can't be resolved, this is a DNS issue. Please check the DNS settings and the firewall settings.
If all these tests passed, please try to reset your Internet Explorer.
If you mean that the server can't start the website in IIS, please check if there is any warning or error in the event viewer of the server. Besides, please try to start the IIS manually. If any error pops up, please post it here. It may give some hints.
Best regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to use a web site for a camera

Is it possible to use a web site for a web cam so someone could watch me while we talk. What is the best software to sue for a web cam? I have the Ceative Web Cam NX.
Thanks

I would turn on the "show java console" and the "log output" options in the java console. You should then be able to see the reason the application will not start.
rykk

I use a web site called ACRIS- up until yesterday I could access all parts of the site, including calling up images of deeds. Now I can no longer get the images via firefox, but can them via windows explorer. Why? How do I fix this?

I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?

Hi jeffbeal,
First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

How to nest a WCF service into a virtual directory off the Default Web Site

I have a service called PdfCreator. I want it installed on my servers in this directory for QA: "Default Web Site/QA/PdfCreator/PdfCreator.svc". I want it installed in this directory for DEV: "Default Web Site/DEV/PdfCreator/PdfCreator.svc".
If I specify QA/PdfCreator in the project's "Web service virtual directory name" field PB complains about invalid characters (the "/"). Is there any way to get around this? The only work around I can think of is adding "qa" or "dev" as a suffix/prefix to the virtual directory name ("Default Web Site/QAPdfCreator/PdfCreator.svc") which doesn't really give me what I want.
This isn't a big deal with only a few services but could become one as more are created.
Thanks,
Mark
PB 12.5.2.5006

Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
...Tom

Deploying Developer Application on to Web Site

Hi Guys
Presently I am working on Developer/2000 1.6.1 release. I would like to deploy my application on to Web Site, I would be very glad any one tell me how to go about this. what all the softwares I would be required and will the same application can be deployed on to the WEB Server
Thanks in advance
Karan
null

Follw the path
Application Builder > Your Application - 101 > Export/Import > Application
there if you are selecting DOS, you will get a sql file.
then you can on the server side...
Import this file as application
_Smith

Disable Java Security Warning: Allow access to the following application from this web site?

Dear all,
When I open web intelligence with BI launchpad, this warning has been shown:
"The web site is requesting access and control of the Java application shown above. Allow access only if you trust the web site and know that the application is intended to run on this site.
Allow access to the following application from this web site?"
and it has just three button of "Yes", "No" and "Help".
I go to Java Control Panel and Security tab, then set security level on the "Medium" and add my site in the Exception Site List but this warning is shown each time I open web intelligence.
I have searched the internet very much but I haven't found any solutions for disabling of it. How can I disable this security warning?
Java version 7 update 67
windows XP
SAP BusinessObject BI Platform 4.1 Support Pack 4 Patch 2
best regards,

Hello,
We have the same issue with BI4.1 SP3 FP3.
Can anyone help us ?
Nawale.

Problem with multiple applications using one audio output

Hey there, I'm having issues setting up my 5.1 headset seen here (http://www.sharkoon.com/?q=en/content/x-tatic-digital) to work with multiple applications.
Right now I have audio streaming from a flash video, when I try run "$ speaker-test -c 6" I get the following error:
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busy
If I try open another application which uses this device, the first application has its sound cut off.
2 more things to note:
- My preference for setup would be audio output through S/PDIF and input through USB, with the USB output disabled (To not waste system resources).
- I unmuted all channels in ALSA, however when I ran the test only 2 channels seemed to be working (Front L&R), it may have been defaulting to the USB connection, in which case, that explains only 2 channels being in use, is there a method of setting the S/PDIF as default system wide?
Thanks in advance for any help given!

brebs wrote:It's put the comments on multiple lines - fix that.
Woops, I guess my paste messed up, new .asoundrc: http://pastie.org/3706033
I can run both at the same time, however I cannot hear any audio. Do I somehow have to change the default device, if so how can I do that?
Edit:
Restarted system now I get:
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
Segmentation fault
(That's with both commands)
EDIT 2:
Interesting, apparently 2 audio streams are working, however the console thing still doesn't work..?
EDIT 3:
Didn't last long, now flash crashes and html 5 doesn't work -.-
EDIT 4:
Flash only works when other audio is active, however it has constant popping sound. I went through the system logs to get the errors of when flash crashes, it's audio crashing it, here's the error:
Apr 1 02:04:15 localhost kernel: [ 7057.499787] AudioThread[6227]: segfault at 7f2e2f7a8008 ip 00007f2e413a2786 sp 00007f2e33614ae8 error 7 in libasound.so.2.0.0[7f2e4131e000+eb000]
Last edited by B3NW (2012-04-01 01:11:04)

ConfigMgr 2012 R2 Distribution Point IIS no directories created

I have an issue where I removed the DP role from my Primary Site Server, and am unable to re-install it.
Environment Server 2012 R2 all in one system (SQL, SSRS, and ConfigMgr installed locally).
The logs state that BITS isn't installed, but I have removed and reinstalled it several times. I have also changed the "Log On" account to verify that it isn't a permissions thing (I have since reverted the account to the default).
The process of creating the DP role allows for the ContentLib folder to be created on the drive, but the SMS_DP_PKG$, nor for the virtual folder creation in IIS. Please help.
From the logs:
Error
Milestone
PS1 6/1/2014 11:36:31
AM
SCCM.domain.org
SMS_DISTRIBUTION_MANAGER
2344       Failed to create virtual directory on
the defined share or volume on distribution point "["Display=\\SCCM.domain.org\"]MSWNET:["SMS_SITE=PS1"]\\SCCM.domain.org\".
Possible cause: Distribution Manager requires that IIS base components be
installed on the local Configuration Manager Site Server in order to create the
virtual directory. Distribution Manager also requires that IIS Web
Services be installed on the Distribution Point Server that needs to support
Background Intelligent Transfer Service (BITS). Solution: Verify that IIS
base components are installed on the local Configuration Manager Site Server,
and IIS Web Services are installed on the Distribution Point Server.

Hi,
Please check Distmgr.log as Torsten said.
Have you try to reboot the server after confirm all prerequisites has met?
Could you distribute a content to the DP successfully?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Satellite L50-A-10W - Multiple applications using sound cause crackle

When I have multiple applications running, for example:
Youtube playing a video, being on skype and playing a game.
They sometimes shut down/mute the other application, or cause the sound from all of them crackle.
It is getting a bit frustrating.
The drivers I have are DTS Studio sound, and the IDT sound card driver.
I can make the crackles stop by turning off the EQ in DTS Studio but that is only a temporary solution for a short period of time, and I need a permanent solution to thiis problem.
My laptop is a Toshiba L50-A-10W.
I have tried multiple headphones already, and connecting an external soundcard and using the jack output of that one works(I don't think that's relevant though).
Any help is appreciated, and I really need it.
Please help.

>It might be something with the soundcard driver or the DTS Studio driver because turning off the equalizer solves it for the moment, but I'm looking for a primary solution.
Well, I think we can only assume about possible reasons.
I dont think that there is a magic or primary solution.
If you think that the driver/software causes this issue, I would recommend you to reinstall this software.
Uninstall the DTC studio. Clean the system (good freeware software is CCLeaner)
Reboot the notebook, download the DTS software and install it again.
You could also test the notebooks sound appearance without the installed DTS software.

Using default web interface for users

I wish to use the default web interface for my users, I do not have the time to develop a custom app. I wish to get rid of the group and and mount point folders.
Please Help,
Jeff

CM SDK 9.0.4 (released very shortly) includes the "Web Starter Application". This is a J2EE Web Application with full MVC architecture and completely open source!
You may be able to obtain this application sooner from Oracle Consulting - it will work on the current CM SDK 9.0.3.
JSP and Tag Libraries make up the UI. The controller framework is similar to Jakarta Struts. It offers localization support, ADA compliance etc.
You can easily develop the application from JDeveloper and deploy to 9iAS.
Matt.

Unable to run my application using java web start

i have created one application and use java web start to download the application. all the files are succesfully downloaded but when i try to run the application an expected error occur. this only happen in my machine but not in other machine i'm currently using
-jsdk1.4.2
-windows 2000 professional 5.00.2195 service pack 3
-pentium III 870 Mhz
-x86-based PC
-RAM 256 Mhz
Anyone knows why, plz help me with this puzzle

Please post the information from the Web Start "Exception" and "Wrapped Exception" tabs when the error occurs (I assume the error was in fact unexpected ;-)
A blind stab in the dark would be that you don't have write permission to the cache directory on the second machine. Also worth checking that the proxy settings on the second machine are the same as the first (if they are on the same network).

How can you develop photo galleries with multiple pages using the web module?

Going through the web module I can see there are many options for developing a web page with a single collection of photos. How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

This thread will give you several ideas.
Re: How do you embed a gallery into an existing website?

Distribution Point IIS Config - Multiple applications using Default Web Site

Similar Messages

Maybe you are looking for