Distribution Point shows a bang

Hello,
one of my DP Shows a bang and the cause is that one package are not processed.
The complete statistic tells me that all packages are OK.

Hi,
This message could be ignored if the DP is healthy now.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Distribution point shows 0 items.

SCCM 2012 SP1 with 6 DPs.
We had 6 distribution points. The Primary Site server D drive got full while installing new DP. We reboot the server and now Administration->Distribution Points show 0 items.
Distribution point shows 0 items.
Distribution Point group shows ALLDPGroup however members show 0 items.
Content Status shows 0 items
Distribution Point Group Status 0 items
Distribution Point Configuration Status 0 items
MP could not complete a task when processing Relay.
Check the logs for clues. Possible cause: Out of disk space.
Solution: Increase the disk space, remove unprocessable files.

If you can get into the Console do you have maintenance task set-up to clean up and delete old records? if so do that.
Why should that help in that case?
@Parvinder_Randev: were you able to free up some disk space? Have you already examined the site and component status? Are there other errors? Site systems should not vanish just because of the disk being full.
Torsten Meringer | http://www.mssccmfaq.de

Duplicate Distribution Point

Has anyone seen this problem where the distribution point shows up twice? I'm in the process of moving all of our distribution point off a secondary(SS1) site to a second primary site(PS2). I moved one of the distribution point and for some reason it's
showing up twice under Administration --> Distribution Point. Though, if I look under the Server and Site System Role it only shows up once. Any Idea why?

Hi,
Please check Smsprov.log and SmsAdminUI.log when you open Administration --> Distribution Point. Anything useful?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Distribution Point Group Status Pie Chart Incorrect

In my SCCM 2012 R2 environment, I have only one Distribution Point Group, which contains all 20 of my DPs.
All packages have been distributed successfully to this DP group (verified via the Content Status node and checking each package, as well as the Distribution Point Configuration Status showing all 20 DPs with the green check-mark.
However, when I look under the Distribution Point Group Status, I see my DP group ("All DPs"), showing 20 members, but an Overall Distribution Status of "Error". The pie chart for that group shows package status as Success: 106
/ In Progress: 0 / Failed: 163. The pie chart for "Distribution Point Group Status" for the "All DPs" group shows the colors appropriate to these (incorrect) numbers. If I click the "View Status" link next to the pie
chart, the different tabs (Success, In Progress, Error, Unknown) show:
Successfully distributed content: 20 (269 Content Items) (last status time: today)
Successfully processed content on distribution point: 19 (263 Content Items) (last status time: yesterday)
Nothing in the In Progress, Error, or Unknown tabs.
So my question... Why is my Distribution Point Group Status showing the group with 163 Failures, but all Distribution Points showing 100% success on all packages? Is there a bug that causes the Distribution Point Group Status to not update?
I've restarted the server a couple of times, and still no change.

Hello all together!
I've the same issue in my SCCM R2 environment.
Has everybody an idea, how to correct this issue?
Thanks for your reply.
Regards Luke

"Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

Hi
We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
source site" but data gathering process is completing successfully.
Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
Thanks in Advance
srkr

Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
site" but data gathering process is completing successfully.
Earlier all the shared DPs are showing under Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

After installing SCCM 2012 R2 CU4, I show a Distribution Point warning that won't clear.

I recently installed SCCM 2012 R2 CU4 on a LAB environment, and nowhere is it more important to wait until all requisite site roles are reinstalled before doing anything else.
I did, and still do, have an warning/ error on the Site components that shows up on one of the child primary sites after the CU4 installation.
Distribution Manager has not tried to install IIS component of operating system to distribution point “[“Display=\\SCxxx\”]MSWNET:[“SMS_SITE=xxx”]\\xxx\”. You should install and configure IIS manually. Please ensure RDC is also enabled.
IIS is installed, RDC is enabled, but I get this error. What could be the real issue?

Hi,
So you have tried to reinstall IIS conponents and DP?
Have you checked the distmgr.log? Anything helpful?
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Is there a way to base a collection from a query that shows all Distribution Points?

Hi,
I am able to create a query in Excel that shows all distribution points in my SCCM hierarchy:
i.e.
SELECT v_DistributionPointInfo.ServerName
FROM SMS_EY0.dbo.v_DistributionPointInfo v_DistributionPointInfo
Is there anyway to get this query into SCCM Queries so that I can base a Collection off of the query. This way, I will have a dynamic collection to show me all of my 630+ distribution points?
Thanks!

Thanks alot for the statement. In my situation it didn't worked. The probem is, that the data in SMS_DistributionPointInfo.Servername is written as FQN. In SMS_R_System.Name the Name is without FQ.
I have successfuly tested the following query in SQL:
Select
* from
v_r_system
where
v_r_system.Name0
in (Select
REPLACE(Servername,
'FQN-String',
'') from
v_DistributionPointInfo)
But this doesn't work in WQL
Select
* from
SMS_R_System where
SMS_R_System.Name
in (Select
REPLACE(Servername,
'FQN-String',
'') from
SMS_DistributionPointInfo)
Do you see another solution for my problem?
Kind regards Stefan Somogyi

Report showing which updates are in which Distribution Point folders

SCCM 2007 SP2 R3. We're working on Software Updates distribution issues, and are trying to find a way to tell in which Distribution Point folder and subfolder names a certain patch is (or get a list of all patches under a certain distribution folder).
As an example, on the DP in the SMSPKGG$ folder , I have a folder named RD100492, in that I have a folder named fec8fc58-7ccd-48fe-a16f-ec5eddafef8f, and in that I have the patch named ie8-windowsxp-kb2964358-x86-custom-enu.exe. I'd like to be
able to run a report to find where that patch is in the folder structure and also to be able to list everything under a certain folder.
I've searched through the Views and Tables, but, can't seem to find the right columns.
Any ideas?
Thanks.

We keep having issues with some SU packages getting corrupt and either one or more patches hang, and dont' let the others install, or they seem to go missing (in once case we had a Patch List with 422 patches in it, and only 11 physically distributed and
created folders). MS Premier Support gave us a script to run that clears out the hung patches in WMI on affected computers for the former issue, but, for the latter issues, we have to run a manual comparison of folders find the ones with missing folders,
and recreate the Patch List. PITA trying to find things, why we are trying to create a report.
NOT just idle curiosity...<G>
I am presuming this info might only be in a Table, but, searching for column names hasn't found it, yet...
Thanks, Garth!

SCCM 2012 R2 unable to install Distribution Point on Windows 7

We have a SCCM 2012 R2 CU 2, single site. We would like to deploy the distribution point at 1 of the branch but hit with issues.
We tried various workaround. Reinstall IIS, manually install IIS.
We had repair WMI, and test WBEMTEST to the WMI and proof it able to connect, given security permission to everyone. Problem still persist.
The distmgr.log shows
CWmi::Connect() failed to connect to \\["Display=\\dpname\"]MSWNET:["SMS_SITE=sitename"]\\"dpname\\root\default. Error = 0x80070005
GetWMIObject - Failed to connect to root\default on ["Display=\\dpname\"]MSWNET:["SMS_SITE=sitename"]\\dpname\. Error code: 0x80070005
CDistributionManager::SetDpRegistry failed; 0x80070005
Anyone can help?

Hi,
Have you tried to disable firewall? Just for test.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 R2 - Distribution Point

Hello,
I have a SCCM environment configured only one server to handle all the Role MP, DP, etc..
SQL Server 2012 is Remotely installed.
I am using Windows server 2012 R2 Standard with installed SCCM 2012 R2.
I am using VMware vSphere 5.1
I want to use SCCM 2012 R2 for PXE boot to deploy Windows 7 Enterprise 32 bit and 64 bit.
But I am unable to install the Windows 7 Enterprise 32 bit and 64 bit through PXE Boot.
When I am trying to install on VM this error message is:
Downloaded WDSNBP from 10.100.1.178
Pending request ID : 31
Message from Administrator:
Configuration Manager is looking for Policy.
Contacting Server 10.100.1.178
PXE Boot aborted. Booting to next device...
PXE-MOF: Existing Intel PXE ROM.
The operating system was not found. Try Disconnecting.......
And 2nd thing when I am selecting Packages in SCCM 2012 R2 Console and right clicking on User State Migration Tool for Windows 8.1 and Selecting Distribute Content and After clicking next when its asking for Specify the Content destination its now showing
any Distribution Point.
Can someone help me please to fix this issue.
Thanks a lot and help/advise much appreciated.

Contacting Server 10.100.1.178
PXE Boot aborted. Booting to next device...
This indicates that there's no task sequence deployed to the computer that was PXE booted.
Torsten Meringer | http://www.mssccmfaq.de

Distribution point Critical

Hi all,
How to setup in sccm 2012 r2 not to use some drives for Distribution point , because we have some drives has very low disk space it shows critical in site status .
Thanks,
Sengo

Specify the preferred drive(s) during the configuration of the Distribution Point and place a file called
NO_SMS_ON_DRIVE.SMS on the other drive(s). This file will prevent ConfigMgr from using it to store any information.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012: failed to connect to distribution point

Hi folks,
I have an intermittent issue and can't figure out the reason so far.
I have a primary server and multiple distribution points. The primary does not have a DP configured. When I deploy a new distribution point, I have the following messages:
Distribution Manager failed to connect to the distribution point. Check your network and firewall settings.
and
Distribution Manager failed to find or create the defined share or volume on distribution point.
DistMgr.log shows the following:
CWmi::Connect() failed to connect to \\AMB-SCCM-E.domain.name\root\CIMv2. Error = 0x800706BA
STATMSG: ID=2391 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBD-SCCM-E.domain.name SITE=IDC PID=2120 TID=3376 GMTDATE=do jun 28 07:24:17.463 2012 ISTR0="["Display=\\AMB-SCCM-E.domain.name\"]MSWNET:["SMS_SITE=IDC"]\\AMB-SCCM-E.domain.name\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\AMB-SCCM-E.domain.name\"]MSWNET:["SMS_SITE=IDC"]\\AMB-SCCM-E.domain.name\"
ERROR DPConnection::ConnectWMI() - Failed to connect to AMB-SCCM-E.domain.name. error = 0x800706ba
Failed to find a valid drive on the distribution point ["Display=\\AMB-SCCM-E.domain.name\"]MSWNET:["SMS_SITE=IDC"]\\AMB-SCCM-E.domain.name\
Cannot find or create the package share.
Error occurred. Performing error cleanup prior to returning.
However, after a while (couple of hours), it looks like everything is distributed on the DP. But this message keeps on coming back during the course of the day and every time a new DP is deployed.
I checked permissions, IIS, WMI, but I can't find out the cause of this behavior. I have events about WMI (id 5605) but I can connect to the WMI workspace (root\MicrosoftIISv2) with no issues.
Can anyone shed some light on this please? It would be greatly appreciated.
Cheers,
Safdar.

To clarify: it's not enough to tick "Windows Authentication" in Add Roles/Features - it actually has to be enabled in IIS configuration.
There are also suggestions to run mofcomp.exe smsdpprov.mof
Tip of me hat:
http://weikingteh.wordpress.com/2013/12/03/failed-to-install-a-new-distribution-point-error-0x800706ba/

2012 SCCM SP1 Distribution Point Certificate store error on Server 2003 R2

Has anyone had this issue on Server 2003 R2 where you are getting this error listed below? All content is being distributed ok. But, monitoring is showing errors with all my Distribution points and I want these errors to go away so I don't have to sift through
all the darn errors.
Thanks for your help. Daniel.
Report status message 0x40000952 to MP
Failed to create certificate store from encoded certificate.. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
Status message has been successfully sent to MP from remote DP

I have found the error message in the smsdpmon.log on a Windows Server 2003 SP2 system acting as a Distribution Point (only). The error shows up when / during a scheduled content validation on that server and is repeated after each package is "validated".
From the smsdpmon.log:
- Start to evaluate package share for package 'XXX0004F' version 5 ...
- Package XXX0004F is verified successfully
- Report state message 0x40000950 to MP
- Failed to create certificate store from encoded certificate.. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance. The parameter is incorrect. (Error: 80070057; Source: Windows)
- Report Body: <ReportBody><StateMessage MessageTime="20140315150802.000000+000" SerialNumber="5"><Topic ID="XXX0004F" Type="901" IDType="0"/><State ID="2384" Criticality="0"/><UserParameters Flags="0" Count="2"><Param>XXX0004F</Param><Param>["Display=\\DPSERVNAME.domain.com\"]MSWNET:["SMS_SITE=XXX"]\\DPSERVNAME.domain.com\</Param></UserParameters></StateMessage></ReportBody>
- Report status message 0x40000950 to MP
- Failed to create certificate store from encoded certificate.. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance. The parameter is incorrect. (Error: 80070057; Source: Windows)
- Status message has been successfully sent to MP from remote DP
- Report status message 0x80000954 to MP
- Failed to create certificate store from encoded certificate.. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance. The parameter is incorrect. (Error: 80070057; Source: Windows)
- Status message has been successfully sent to MP from remote DP
I tried to pretty up the above - not sure that I was successful.
The site server is a Windows Server 2012 R2 Standard running SCCM 2012 R2.

QUERY TO FIND FREE DISKSPACE IN SCCM 2012 DISTRIBUTION POINT

this is the query to get free disk space on distribution point ,but this is not working for sccm 2012 ,please help
Select
Distinct
SD
.Name0,
SR
.RoleName,
LD
.DeviceID0,
LD
.FreeSpace0
* 100
/ LD.Size0
'Free Disk Space'
From
v_R_System SD
Join
v_Gs_Logical_Disk LD on SD.ResourceId
= LD.ResourceId
Join
v_SystemResourceList SR on SD.Netbios_Name0
= SR.ServerName
Where
LD.DriveType0
= 3
and
SR.RoleName
=
'SMS Distribution Point'
ankith

you're probably getting 0 rows...
v_SystemResourceList.ServerName contains the netbios+domain name, while v_Gs_Logical_Disk.Netbios_Name0 only contains the netbios name (no domain), therefore the join doesn't find any matching rows...
You need to trim the domain name from the field {LEFT(SRL.ServerName,CHARINDEX('.', SRL.ServerName)-1)}
try this query instead:
SELECT DISTINCT
SYS.Name0 As 'Device'
,SRL.RoleName As 'Role'
,LD.DeviceID0 As 'Disk',LD.FreeSpace0,LD.Size0
,LD.FreeSpace0 * 100 / LD.Size0 As 'Free Disk Space'
FROM
v_R_System As SYS
Join v_Gs_Logical_Disk As LD on SYS.ResourceId = LD.ResourceId
Join v_SystemResourceList As SRL on SYS.Netbios_Name0 = LEFT(SRL.ServerName,CHARINDEX('.', SRL.ServerName)-1)
WHERE
LD.DriveType0 = 3
And SRL.RoleName = 'SMS Distribution Point'
Additionally, if you notice that the LD.FreeSpace0 field returns NULL, you need to enable the hardware Inventory collection of this information [ client settings > hardware inventory > Logical Disk (SMS_LogicalDisk) > Free Space (MB) ]... Then initiate
the hardware Inventory cycle action and it should show results...
I don't have this field inventoried, so I cannot confirm the accuracy of the query...

SCCM 2012 Distribution Point Issue

Dear Team,
Hi, we deploy another Distribution point on other server on same subnet/LAN. but it show errors and progress run daily but not successful.
durranifaisal

Hi, did have some issues before when installing remote distribution points. More about that can be found here:
http://henkhoogendoorn.blogspot.nl/2014/07/installing-remote-distribution-point.html
It mentions: I did choose "Install and configure II if required by Configuration Manager" during installation, but IIS was installed already on servers. I did install BITS on servers also, because this seems to be needed (installation can be failing
otherwise). Strange thing, because BITS is no prerequisite at all? What I did NOT however is installing RDC as a prerequisite. Therefore files couldn't be replicated after all.
The issue described above where you can only add 2 roles is not known to me. Maybe server must be restarted or prerequisites are not in place? Like to hear the answer as well..
My blogs: Henk's blog and
Virtuall | Follow Me on:
Twitter | View My Profile on:
LinkedIn

Distribution Point shows a bang

Similar Messages

Maybe you are looking for