Distribution Receipt Confirmed Keyfigure - Input/Output

Hi Experts,
In SNP planning book, we would want key figure "Distribution Receipt Confirmed" to be editable.
When I tried to make this key figure Input/Output, I got a message "Key figure Distributionreceipt confirmedmust not be set to ready for input".
Can you tell me how can I make this key figure Editable in Planning book-data view.
Thanks,
Vipul

Thanks Somnath,
Our client would like to change distribution receipt confirmed for shipping directly from plant to DC if ther is a full truckload but system may suggest shipment via Warehouse as it was defined as a least cost route. In our case, 70% shipment will happen via warehouse rest directly from plant to DC.
As APO can't suggest the route based on truckload building, we were thinking about this approach.
Let me know if you know any alternative as we are not using SAP TM.
Vipul

Similar Messages

Hard Drive "Input Output" Error When Attempting to Format

A friend just gave me a nice PowerBook that seems to be in need of a fresh OS and when attempting to format the hard drive I am getting an "Input Output" error. Any suggestions to overcome this issue and format the drive?

Hi all,
I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
http://www.apple.com/support/macbook/hd/repairextension/
Doh! Too late?
So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
https://discussions.apple.com/message/16090313#16090313
I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
https://discussions.apple.com/message/16081818#16081818
So, what can the problem be?!?!?!?!?
In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
Can anyone confirm this?

Disk Utility "Input - Output error" when attempting to erase Hard Drive

Hope that someone can point me in the right direction.
I bought an external hard drive for Windows a year back and loaded music onto it. I realized that I my MAC wasn't getting "Read / Write" privileges for the External Hard Drive, so I decided to try to Partition it and make it into a FAT readable device. It erased all data from my hard drive, but Disk Utility stopped the process and displayed an "input - output error".
Consequently, I can't initialize the external hard drive to make it usable on my MAC.
Can anyone point me in the right direction so I can "reformat" my external?
Thanks!

Hi all,
I'm having similar issues on a white macbook (2006 model). I ran into some trouble with it about a month ago, when on booting up, it showed only the folder with a question mark. Booting up from the original grey install DVD worked, so I thought the problem was most likely a faulty hard drive.
It's only after having this problem, that I came across this recall for possible faulty hard drives, that Apple offered:
http://www.apple.com/support/macbook/hd/repairextension/
Doh! Too late?
So, I got onto ebay and picked up a deal and received my new hard drive yesterday. I swapped out the original 80GB with 320GB, only to find the same input/output error described by the OP, here (also in a couple of other Apple discussion posts - see below).
Disk utility shows the new hard drive to be 2.3TB in size! Should be 320GB - but, this is also what others have described. See e.g.,:
https://discussions.apple.com/message/16090313#16090313
I've run the extended testing from the CD (holding down 'D' on boot-up) and it reported no problems. Also, similar to others experiences:
https://discussions.apple.com/message/16081818#16081818
So, what can the problem be?!?!?!?!?
In this post, JMPC suggests it has something to do with the size of the new internal hard drive....groan.....:
https://discussions.apple.com/message/16145560?tstart=0#16145560?tstart=0
Can anyone confirm this?

Keyfigure in Output mode

Hi all,
I have an issue in DP Planning book.
Normal scenario:
Keyfigure is in Output mode at the aggregated level i.e value is uneditable at the Totals level, but if I drill down to Details all, it is editable.
Issue:
For a particular product, the same keyfigure is in the Output mode only for one Product-Location combination at the Details all level and this is observed only from couple of months. I checked for some of other products and the result is as we expected (as explained in the Normal scenario). I am unable to find out why there is an issue for only this product-Location combination? Can anyone help me out

Sai,
The 'normal scenario' you have explained itself is puzzling to me. Normally, once you configure the Input/Output setting for key figure in the planning book design, the setting will be applicable to all charateristic levels. Viewing the KF in 'Details All' should not change the behavior. The only possibility that this might have happened is if you are using any macros to control the I/O behavior of a KF. The macro might have failed to execute for that particular product/loc/S Org combination and hence you find it 'editable'. Pls do let me know if I'm missing something in understanding your issue.
Meanwhile, can you check out the settings and let us know where the I/O setting is controlled.
1) Is it configured in Planning Book design (/SAPAPO/SDP8B)? You can check this out by checking table /SAPAPO/PBDVWLK. Specify the pl book/ data view and check the entries for the concerned KF. The field 'Output' values control the I/O behavior of the KF.
2) Are any macros running? (Probably using the CELL_INPUT(0) function)
Let us know your settings & hopefully someone should be able to provide you a solution.
regards,
Srinidhi
Edited by: Srinidhi Acharya on Feb 9, 2009 10:33 AM
Edited by: Srinidhi Acharya on Feb 9, 2009 10:34 AM

External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

Text Input/Output

I have downloaded the text input/output widget found here:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1253 021
I inserted the input animation on one slide and the output
animation on another.
When I preview, the input box doesn't show up. What am I
doing wrong?
Thanks in advance for help or advice!

Hi there
Likely you are using Captivate 3 and you have upgraded your
Flash Player to version 10.
Click
here to read a thread where I believe one of he Adobe Captivate
team sheds a bit of light on the issue
Click here for an Article
and link for uninstalling Flash Player/Plug In:
Click here for an Article
and link for installing and older version of the Flash Player/Plug
In:
Version 9 should allow things to work okay with Captivate 3
Cheers... Rick

I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks Andrew

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

I am trying to run my electric guitar in garageband 11 but there is no options to modify the inputs/outputs to built

There is no option to modify the sound input/output to built-in input or built-in output. I'm guessing the electric guitar is not being registered. I am using a 1/8" mono -1/4" mono cable to go directly from the output jack on my electric to the headphone jack on a macbook pro. How can I get this to work?

When you use an external device for input, GB often automatically selects that same device for output. It's an ease-of-use feature for most external devices. If your device doesn't give you the option to output to speakers/headphones, you don't want GB to do that.
Within GB, go to GB>Preferences, Select the Audio/Midi tab. In the Drop-down under output, choose "Built-in Output" and connect your external speakers/headphones to the Mac's headphone port (Alternately, you could use system preferences to direct your Mac's audio-output to your speakers and select "System Setting" in GB Prefs. The Mac's own speakers aren't going to be nearly as much fun as running it to your big speakers/headphones).
Hope that makes sense...

How to get center alignment of Input/Output field in Module Pool

Hi Friends,
I am using Input/Output field in my Module pool program. Dynamically i am submitting the text to Input/Output field. What i want is i want to display the submitted text as center. By default It is displaying left aligned.
Thank U in advance.
Mahender.

Hi,
Use syntax "Centered".
take one variable push into the field
write w_variable1 to w_variable2 centered.
next push the varaible to Destination screen input/output Field .
Make sure the Field the Character Type.
Prabhud@s

How to check current input/output rate on router subintenterface via SNMP?

How to check current input/output rate on router (2821, etc..) subintenterface via SNMP, like cacti monitoring system.
I cant find OID to make this with snmpwalk.
Or there is no way to check current load by this way? Only polling?
P.S. Ethernet subinterface, of course.
With great respect, S.A.

Hi,
Try to use:
1.3.6.1.4.1.9.2.2.1.1.6 - InBitRate
1.3.6.1.4.1.9.2.2.1.1.8 - OutBitRate
1.3.6.1.4.1.9.2.2.1.1.28 - ifDescription

Disc image input/output error

When burning a disc image using disc utility, I get the ever so popular input/output error message. I cannot find anywhere on these posts a solution to this problem. It is not dirty discs, etc. It happens when I try to copy dvd's... which are not licensed, etc.

Could be so many things, Input/Output errors are generally loosing contact with a device for a variety of reasons, do you get any error # with that?
Open Console in Utilities & watch for more info whn you try to burn, or open the Disk Utility Log if there.

"input/output error' when making disc image from DVD

I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
This means I'm unable to copy the disc and then successfully install my Logic Studio.
Any ideas?

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

How to set input/output "use" attribute in the WSDL file of BPEL process?

Hello,
I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process).
I wrote manually the corresponding WSDL file for my BPEL process, where I stipulated for the operations exposed by my process ( in <soap:binding> tag) the value of the attribute "style" to "rpc". Also, for each <input> and <output> of the operations (inside the <operation> tag), I set manually the attributes "use" to the values "encoded". Something like this:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers"/>
<input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</input>
<output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</output>
</operation>
The issue is that, when the BPEL process is built and deployed, the WSDL file generated automatically by BPEL (based on the one manually writen) set the values of the "use" attributes to "literal". This is what is generated:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers" />
<input>
<soap:body use="literal" namespace="http://acm.org/samples" />
</input>
<output>
<soap:body use="literal" namespace="http://acm.org/samples" />
</output>
</operation>
Is there any chance to keep the original values (written by hand) for the "use attributes?
Many thanks in advance!
Regards,
Marinel

I am not sure I understand your question. If you want all your BPEL service to be rpc still by default, you can change the templates: C:\eclipse\plugins\bpelz_0.9.XXX\templates.
The BPEL PM engine support both style of invocation.
I hope this helps. -Edwin

Input/output error when copying a DVD

I created A DVD some time ago using Roxio. It plays in DVD Player on my Mac Pro, but I can't create a .dmg using Disk Utility. I always get "Input/Output error". I got the same result on my wife's newer Apple. I tried to Restore it but can't, and Verification shows no problems that I can see. I am able to copy DVDs created on Final Cut Express just fine. Any suggestions to help me create copies of an old DVD I love?

I just figured out how to get around the problem. Download Burn and use it to burn the VIDEO_TS file to a new disk. It must be something that Apple adds to make it hard to copy DVDs made from non-Apple software.

I'm trying to backup a my harddrive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen

I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

Distribution Receipt Confirmed Keyfigure - Input/Output

Similar Messages

Maybe you are looking for