Distribution Status : A Error in Distribution.

Hi All
I created Standard Order in CRM with 10 line items. It is replicated in R/3 with below error.
Header error : Item 000000 does not exist
Item level Distribution Status : A Error in Distribution. (At all the items)
I checked in SMW01, SMQ1 & SMQ2. Everthing is Green.
I dont know how to find out exact issue.
Please reply
Regards
Jayesh

Hi Jayesh,
Can you please state weather Item 0000 has been entered in the sales order in CRM or not and what is the status of the Order in CRM is it error free in CRM??
Also Please check for the Imcompletion Log in ECC system
Hope it shall provide you with the details of the error atleaset
Also you may check for the List of Recievers and Error Segments in BDoc for further help
Also check for the Item level numbering in Transaction Type used
Also please check for Error in the header level and also see for further details and technical help option in the error message
To get actual reason for the error
Hope it helps
Thanks and Regards,
RK

Similar Messages

Error message in distribution status of crmd_order

Hi All,
We are working on CRM 2007. After saving the transaction type in cRMD_ORDER the distribution status attribute in the status view is showing as "Error in distribution".
But still we can find the document being available in ECC.
Please help us in this issue.
Points will be rewarded liberally.
Thanks in advadnce,
RK

Have you applied Support Package 2? We had a similar error that was caused by a program error that got fixed with SP2.
We got the error in SAP Note 1128686 which is due to a program error that has a correction in the note and also included in the cumulative Support Package 2 (SAPKU60002).
After applying the SP, sales orders created in IC Web now are in status Distributed Open.

Error in distribution to R/3

Is there any way of seeing inbound BDocs in R/3?
I know that my message hit the outbound queue in CRM but the sales doc was not created in R/3.
I read an earlier message that suggested that you could deregister the queue in R/3 and then see if the message arrives, but we do not have any inbound queues registered. My order status changes to Error in distribution in CRM.
Does anybody have any ideas?
BTW - I can create an identical order directly in R/3.

Hi Stuart,
Before try further debugging into the queue, I just
wondering if you have check tcode SMW01 and SMQ1 ?
Normally you can see the error message thru these
Queue monitoring. The error message most of the
time is quiet straight forward to tell you what is wrong.
The error message "Error in Distribution" you see
is from document right? Could you tell the error
message from the Queue. This is the easiest way to
find out what causing the Error (but may be not the
very effective way - depends on the error message).
Refer to your question about deregister, I think
what you mean is deregister the Q-OUT Destination
(which pointed to R/3). By deregister this, your
next document created will stopped in the queue where
you can do DEBUG LUW (this is in tcode SMQ1).
I did this before when debugging BP transfer from CRM
to R/3. In your case, with document, should be same way.
Hope this helps.
Cheers,
Gun.

Update of Distribution Status

Dear Experts,
Im working on SRM 5.0 Server 5.5. The problem Im facing is that when I try to re-process the Idoc from SRM to the Back-end that failed before, on the back-end the contract is correctly updated but on SRM the status of the distribution is not updated accordingly.
Is there a way to re-process the replication of the GOA to Back-end when this failes for any reason in order to get updated the status of the distribution from DISTRIBUTION ERROR to DISTRIBUTION COMPLETED?
Can you suggest a way to accomplish someone help me to understand what is wrong?
Thanks a lot.

Dear Experts,
Im working on SRM 5.0 Server 5.5. The problem Im facing is that when I try to re-process the Idoc from SRM to the Back-end that failed before, on the back-end the contract is correctly updated but on SRM the status of the distribution is not updated accordingly.
Is there a way to re-process the replication of the GOA to Back-end when this failes for any reason in order to get updated the status of the distribution from DISTRIBUTION ERROR to DISTRIBUTION COMPLETED?
Can you suggest a way to accomplish someone help me to understand what is wrong?
Thanks a lot.

Getting error in distribution of Maintenance Certificate via SDCCN

Hello All,
While executing SPAU in ECC 6.0 I am getting error in distribution of Maintenance Certificate via SDCCN.
While I am trying to download note 0001293657 Fehler bei Verteilung von Wartungszertifikaten über SDCCN- I am getting error in distribution of Maintenance Certificate via SDCCN...Please suggest

Hi,
Check wheather your Maintenance certificate is valid or not.
For checking the same goto Slicense TCODE.
Thanks
Anil

Document distribution Status

Hi All,
I am new in SAP and I am for the moment trying to learn about document distribution in DMS.
I wonder what I should do to get the Status for my distribution order to OK?
For the moment the Status alway stays at PC, depending how I distribute the Status has been AS nad BD before staying at PC.
In my example I have distributed via Recipient List and succesfully received the document with its originals to an email.
I have tried both confirm receipt/ no confirmation and also changed other things.
Thanks in advance
Mikael

Hello,
Good day!
I was wondering if you could help me with my problem regarding document distribution status. I would like to add a new external address in the recipient list. I was able to maintain the address in SOAD and SOCP however the status stays at BD for the new external address that I maintained. For the rest of the recipients, it was processed successfully (email was sent and a form was printed).
Can you tell why is it not working or give your inputs on what to check?
Thanks and kind regards,
Ivy

Cost Planning in CRM Campaigns--Value Distribution Is Incorrect---Error

Hi,
Im working on CRM 2007 (6.0)
I used the standard ones
Planning profile Group--4MKT
Profile--4CRMMP03,
Plan Type--Cost planning
Planning Area--4CRM0001(Marketing Budgeting/Cost Planning)
This is assigned to the category CP in the define planning profile groups node in IMG.
Im able to view this in WEB UI 2007, however when i choose DISTRIBUTE, im not getting the BPS Layout appearing from BI Planning.It is appearing in Tcode-BPS0(BI) perfectly but not in CRM WEB UI.IM getting the error------Value Distribution Is Incorrect
Im basically looking at that layout to appear in the campaign where i can key in my planned costs, resources and then i would like these values to be sent to ECC and BI will extract them and provide reporting.
Is this a standard functionality or should i necessarily use a EEWB field, if so how?

Hi Noah.
Please check the following things:
- Whether the Planning Profile 4CRMMP03 has been activated from Client-000 of BW system and transported to Client-800
- After activating the Planning Profile 4CRMMP03 in Client-000 and transporting to Client-800, go to transaction bps0 in BW system and select the planning profile tree. Right click on it and set the profile.
- Check whether Planning Profile 4CRMMP03 is associated to multi Planning Area, which will consist of basic planning areas.
- Check whether at Planning level, Characteristics and Key Figures are selected and filtered.
Wish this will be useful to you.
regards
Srikantan

Distribution Status Failure

When I open the SCCM 2012 R2 Admin Console and browse to
Monitoring | Overview | Distribution Status | Distribution Configuration Status
, all the DPs are banged. The MP is fine.
When I look at the associated asset messages, each of them says...
Upon review of that DP's smsdpmon.log file, the only thing I see wrong is...
I log onto the MP server and launch Powershell. I then run the following query.
Get-WmiObject -ComputerName SRVCRPNAME -Namespace root\sccmdp -Query "select * from SMS_PackagesInContLib" | select PackageID
Sure enough, TEI007C is in WMI but when I look in the DP’s SCCMContentLib\PkgLib folder, the matching INI file is nowhere to be found.
I can’t find TEI0007C anywhere in SCCM so there’s no way I can redistribute that package to resolve this issue. It looks to me like it’s just stuck in WMI but isn’t supposed to be.
Any ideas on what I should do next?
BTW, we’ve performed the following upgrades about a month ago. I’m only now becoming aware of this problem as I just found this view in SCCM Console. I might have been this way for a while I wouldn’t have known it because I'm very new to System
Center as a whole.
SCCM 2012 SP1 upgraded to R2
MDT upgraded to MDT 2013
AEK upgraded to 8.1
Thank you for any assistance you can offer.
Geoff Crookshanks

Have a look Pls
http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx
http://scug.be/sccm/2013/12/12/system-center-2012-configuration-manager-troubleshooting-and-resolving-content-mismatch-warnings-on-a-distribution-point-with-powershell/
Thanks, Prabha G

Error with distribution offline by email

Hi
We experienced an error when trying to use distribution offline by mail (save to folder is working).
- Step Distribution list is OK
- Step Distribution list sections is OK
We got this error "The system cannot publish the book to BPC Web (Make single PDF)" and at the end "Automation error".
It seems that he tried to generate a pdf.
Have you ever got this problem ?
We are BPC NW SP05 and prerequisites (SMTPAUTH, SMTPPASSWORD, SMTPPORT, SMTPSERVER, and SMTPUSER) are entered.
Thanks in advance
Edited by: Jacques Wickersheim on Nov 19, 2009 12:03 PM

Hi,
Anybody to help us ?
Thanks

PeopleSoft Reports Distribution status is 'Posting'

In our Peoplesoft application, all the jobs are holding with distribution status as 'Posting'. All the instances are qued up in ps_cdm_transfer table. Once the Process Scheduler server is rebooted, all of them gets posted but again it is holded with posting status. It requires to restart the process scheduler server again and again to get them posted. The instance was working fine till now and none of the logs tells anything about this. Also one point needs to be mentioned here that we are not able to see the message log for the jobs which are holding in 'Posting' status and even though the transfer retries are set, it is not doing the transfer at all. Any help is really appreciated as this is a bit urgent from our end.

- is there sufficient space on the report Repository?
- How many DST Agents are there. is spawning enabld?
- and then check the count(*) from PSPRCSRQST, PSPRCSQUE & PS_CDM_LIST. They should be in Sync.
Finally check the oldest one that is in 'POSTING' and see how big is its o/p file size. Go to log_output on the Prcs Server. If it is too huge verify wiht users and delete that report and then bounce/reconfigure the Prcs Srv. Mostly this shud resolve the issue.
and it would be good if u post the info from the Dst & Scheduler logs from Prcs Scheduler.
-vKing.!

Link error for distribution

Hi, I received an email with the link to download the new version of flash player for distribution, but does not work
Dear Miguel Ángel Abarca,
Thank you for submitting a request to distribute Adobe® Software. Your request has been approved, and you may now distribute the Adobe® Software listed below, subject to the terms and conditions set forth in the Adobe Reader and Runtime Software Distribution License Agreement.
Approved Software:
Adobe® Flash® Player
Adobe® Reader® Software
Attached is an Adobe Portable Document Format (PDF) file of the distribution license agreement. Please keep this file for your records. The agreement is valid for one year, after that one year you can renew the distribution license agreement by following the same process.
Below you will find the necessary details and download links for the product(s) that you have been approved.
Adobe® Flash® Player
To download the Flash Player version that you would like to distribute, please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=<number>

Hello, here paste part of message:
To download the Flash Player version that you would like to distribute,
please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=4358bc39-5e77-4893-99cf- 9f7c7a8d5456
*You may not share the above link, share information with others, or
publish the above link on websites, blogs, or by any other means that
can be publicly accessed. The information contained on this site is
meant for your use only in accordance with Adobe Flash Player
Distribution License Agreement you accepted. You may direct others to
http://www.adobe.com/products/players/fpsh_distribution1.html to request
distribution rights.
El 13/01/2015 a las 17:53, m_vargas escribió:
>
Link error for distribution
created by m_vargas <https://forums.adobe.com/people/m_vargas> in
/Installing Flash Player/ - View the full discussion
<https://forums.adobe.com/message/7091835#7091835>

Synchronize Material Status and Distribution Status

As we have assigned (in our concept) one distribution status to one material status, we want to ease the maintenance for the users so that they only have to set the material status. The distribution status should then be adapted automatically (for both cross-plant and plant-specific status).
My idea was to create a report which maybe runs nightly and sets the distribution status according to the material status.
Has anyone made experience with that and give me some hints on how to do that well?
Thanks for your contribution!

Hi Mohan,
I am talking about the material master. You can set both status there. What I want to have is that
-x-plant material status is always equal to x-plant distribution status
--> MARA-MSTAE is always written to MARA-MSTAV
-plant-specific material status is always equal to plant-specific distribution status
--> MARC-MMSTA is always written to MVKE-VMSTA
Best regards
Martin

FM to check Distribution Status

Hi Forum!
I want to check in CRM the distribution status of the orders. Does anybody know a FM to get it¿?
Regards and thanks in advance,
Mon.

You can use the function module BDC_PROTOCOL_SELECT
for this pass the session group name you get the details.it will retun the status also.

TRANSFER failed!.Error: Error obtaining distribution information for asset_

i am getting the following error while running the Asster Tranfer API in R11
TRANSFER failed!.
Error: Error obtaining distribution information for asset_id &ASSET_ID.
I want to transfer the asset location and code is as follows
l_asset_dist_tbl(1).distribution_id := 2385128;
l_asset_dist_tbl(1).transaction_units := -1;
l_asset_dist_tbl(2).transaction_units := 1;
l_asset_dist_tbl(2).assigned_to := null;
l_asset_dist_tbl(2).expense_ccid := null;
Any idea is highly appriciated,

Below is the code which i used to transfer the asset. Used the same code mentioned in metalink
declare
l_return_status varchar2(1);
l_msg_count number:= 0;
l_msg_data varchar2(4000);
l_trans_rec fa_api_types.trans_rec_type;
l_asset_hdr_rec fa_api_types.asset_hdr_rec_type;
l_asset_dist_tbl fa_api_types.asset_dist_tbl_type;
temp_str varchar2(512);
begin
--fnd_profile.put('PRINT_DEBUG', 'Y');
dbms_output.enable(1000000);
fa_srvr_msg.init_server_message;
fa_debug_pkg.initialize;
-- fill in asset information
l_asset_hdr_rec.asset_id := 2000068;
l_asset_hdr_rec.book_type_code := 'US ASSET SERIAL';
-- transaction date must be filled in if performing
-- prior period transfer
--l_trans_rec.transaction_date_entered :=to_date('01-JAN-1999 10:54:22','dd-mon-yyyy hh24:mi:ss');
l_asset_dist_tbl.delete;
fill in distribution data for existing distribution lines
affected by this transfer txn. Note: You need to fill in
only affected distribution lines.
For source distribution, you must fill in either existing
distribution id or 2 columns(expense_ccid,location_ccid) or
3-tuple columns(assigned_to,expense_ccid,and location_ccid)
depending on the makeup of the particular distribution
of the asset.
--l_asset_dist_tbl(1).distribution_id := 108422;
--l_asset_dist_tbl(1).transaction_units := -1;
l_asset_dist_tbl(1).transaction_units := -1;
l_asset_dist_tbl(1).expense_ccid :=108422;
either above 2 lines or below 4 lines must be provided
for source distribution:
l_asset_dist_tbl(1).transaction_units := -2;
l_asset_dist_tbl(1).assigned_to := 11;
l_asset_dist_tbl(1).expense_ccid :=15338;
l_asset_dist_tbl(1).location_ccid := 3; */
-- fill in dist info for destination distribution
l_asset_dist_tbl(2).transaction_units := 1;
--l_asset_dist_tbl(2).assigned_to := NULL;
l_asset_dist_tbl(2).expense_ccid :=109260;
--l_asset_dist_tbl(2).location_ccid := 3;
--l_asset_dist_tbl(3).transaction_units := 1;
--l_asset_dist_tbl(3).assigned_to := 10;
--l_asset_dist_tbl(3).expense_ccid := 24281;
--l_asset_dist_tbl(3).location_ccid := 3;
l_trans_rec.who_info.last_updated_by := 25728;--FND_GLOBAL.USER_ID;
l_trans_rec.who_info.last_update_login := 25728; --FND_GLOBAL.LOGIN_ID;
FA_TRANSFER_PUB.do_transfer(
p_api_version => 1.0,
p_init_msg_list => FND_API.G_FALSE,
p_commit => FND_API.G_FALSE,
p_validation_level =>FND_API.G_VALID_LEVEL_FULL,
p_calling_fn => NULL,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
px_trans_rec => l_trans_rec,
px_asset_hdr_rec => l_asset_hdr_rec,
px_asset_dist_tbl => l_asset_dist_tbl);
if (l_return_status != FND_API.G_RET_STS_SUCCESS) then
dbms_output.put_line('TRANSFER failed!.');
l_msg_count := fnd_msg_pub.count_msg;
if (l_msg_count > 0) then
temp_str := substr(fnd_msg_pub.get(fnd_msg_pub.G_FIRST,
fnd_api.G_FALSE),1,512);
dbms_output.put_line('Error: '||temp_str);
for I in 1..(l_msg_count -1) loop
temp_str :=
substr(fnd_msg_pub.get(fnd_msg_pub.G_NEXT,
fnd_api.G_FALSE),1,512);
dbms_output.put_line('Error: '||temp_str);
end loop;
end if;
else
dbms_output.put_line('TRANSFER completed successfully!');
dbms_output.put_line('THID = ' ||
to_char(l_trans_rec.transaction_header_id));
end if;
fnd_msg_pub.delete_msg();
end;
Thanks

Run status is still "processing" but the distribution status is "posted"

Hi all,
We have run a process yesterday.
The process' run status is still "processing" but the distribution status is changed to "posted". what could be the reason for this? i have never seen such thing in process monitor.
Please help me.
Thank you,
Bye.

And does the report posted and accessible from the monitor ?
Peopletools version ? OS ? Database ?
Did you try to refresh the page (not through the refresh button but with your web browser) ?
Did you try to disconnect and reconnect ?
Nicolas.

Distribution Status : A Error in Distribution.

Similar Messages

Maybe you are looking for