Distribution Web Report 9i

I use Report Developer 9i and I have used "distribution" for a report that has a paper layout.
Do you know how can I use distribution for a WEB REPORT(.jsp) ?
Thank you,
Maria

Maria,
Advanced XML based distribution you refer is for paper layout only.
You can't use it for web only jsp report.
Howwver you can use url engine and run the jsp report as a job and use reports server to distribute to mail etc
Please refer to section 8.5 of
http://otn.oracle.com/products/reports/htdocs/getstart/docs/a92102_01.pdf
Thanks
The Oracle Reports Team

Similar Messages

  • Providing un-secured access to a web report.

    Hello Experts,
    We have been sending out 'Load Status' emails on a daily basis for various BW loads. Recently we discontinued this process and set up a report based on one of the statistics cube. We got out the link for this web-report to all the users in our daily load status distribution list.
    The problem now is that when you click on the link, it pops out a window asking for the log-on information to our production system. But it looks like a few of the users do not have access to the production system and are hence unable to access this web-report.
    Is there any way to allow un-secured access to this particular web-report to all users i.e.without a screen asking for log-on information?Is it possible to set up a generic user id for this report that allows all the users to access this report without actually giving them access to our production system?
    Thanks
    Arvind

    Arvind,
    What is your BI system version ?
    if it is 3.x - then the URL will have a link to your server followed by a Question mark "?" and then some parameters.
    The value till the ? mark is the Web service for the same - you can make this Anonymous in SICF but then this would mean that all queries can be accessed through this URL ...
    else create an RFC enabled function module based on RRW3_Query_View_data and then use this for your query and expose the same as a web service and make it anonymous ... or have a BSP page to do the same....

  • Web Reports - Drilldown Problem

    Hello Guru's,
    I have a Web Report where I am only displaying the text properties and the result table. In the selection screen the user has to select a company which he will be working with. I also have configured in RSBBS a drilldown for this report. The main report is working fine, the problem lies depending on where the drilldown is made. In the result area you have the characteristics, and the results for each of them eg
    Org. Area - Distribution Channel - Qty - Value
    AAA        -  MT                         - 50   - 150
    If I do a drilldown from the "50" in the Qty row, the drilldown works fine by transfering the selected company to the second report, but if I do a drilldown from te "AAA", or "Org. Area", the selected company value is not transfered to the second report thereby generating an "Authorization Error" considering that the user has acess to a few companies. does anyone know how to solve this problem.
    Obs. All of the rules in BBS are set to generic, except the company which is set to variable as a diferent variable for the company is used the second report.
    Thanks
    Message was edited by:
            Alexandre Soares

    I have partially solved this problem by including the company at the line level and under its characteristics selected it to not display it. The problem only remains when the drilldown is made from the titles ... if anyone has had this problem please let me know how it can be worked out.
    Thanks.

  • How to create Variables(User Input Selections) in WEBI Report

    Hi Team,
                  My requirement is to create a WEBI Report on top of BEx query,I have created a Universe and WEBI Report on this Universe but my doubt is How to create Variables for the User to select.The Input selection should be
    User Iputs(All are drop downs)
    Distribution Channel :       ->drop down,user can select one
    Division:                          -> drop down,user can select one
    Department:
    Season:
    Collection:
    Date Format              Valid From:                                 Fiscal Week:
    When the user gives the above selections the output should be displayed as
    Material No   Description     Markdown Week     Reason code1(under this)        Reason code2(under this)   like that for all the
                                                                                valid from         Amount              Valid from          Amount            Reason code.
    I have designed the basic layout of the Report but wanted to know how to design like this,Please help me out in this Format.
    Thanks & Regards,
    Somu

    Hi, depending on the way you set this up (it is not entirely clear if you are talking bex variables or report drop down filters), use the following;
    For BEX variables, the choice will be in the
    UserResponse("prompt message")
    this you can display in the message format you want.
    For drop down filters the choice will be in the DrillFilters(), this one will show all selections in one string.
    However, if you want to format this to a certain message, you need to use the Formula
    DrillFilters([object from drill bar])
    This will give you the result of just that one selection. If the user did not select (yet), the value will be "".
    Hope this helps,
    Marianne

  • Selective Broadcasting OF web reports

    Hello,
    We have a report that displays Sales Amout by Region.
    We need ability to send the Alert/Web report to the Regional Sales Manager when the Sales fall below perticular threshold.
    We have a condition in our query that works just fine for that purpose.  And the Information Broadcasting works fine as well.
    Issue is we have over 150 Regional Sales Manager and I do not wish to create 150 Information Broadcasting settings to be run nightly.
    Is there any other options to achieve this functionality.
    Thanks,

    Hi,
    If you want the Regional Sales Managers to see data or get an email when the Sales of their particular region has gone below
    the threshold value, first you need to make the Region Authorization relevant to control access to the Region Specific Data and do the necessary configuration for the Roles.
    Secondly, in the distribution in Broadcasting, you can specify the Users in Role, which will take care of this.
    Hope this helps.
    Regards,
    Tom.

  • Problems access to a web application (Web Interface or Web report)

    Hi,
    We found problems with the access to web application. Some users have problems with direct links to the web applications(Web Interface or Web reporting), when they click on the link an error message appears, the message displays the following text:
    "Cannot open file Bex?sap-language=ENbsplanguge=ENcmd=idoc_TE.."
    Clicking in details the message is "No Access to specified file"
    For this users the access to excel reporting is correct, the message appears when they click on the direct web links through the browser or directly in BW system, but if they type the URL they can access. Other users can use the direct web link without problems.
    I highly appreciate any help or idea about how to solve this issue.
    Thanks in advance.

    HI,
    please ask to your basis that check the language of every single user on su01 tx.
    This is the problem i think.
    Natalia.

  • How to remove blank pages from WebI Report in view page layout option

    Hi,
             I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
    Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
    Thanks in advance.

    Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
    Now check if there are any cell going into second page.
    - if there are any blank cell which is there after table.
    you have to check formating very carefull.

  • Change order of key figure is not working in Web report output (using WAD)

    Hi,
    We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
    Though same change order is working fine in Bex Analyser.
    Kindly suggest some inputs.
    Thanks.

    Hi,
    On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
    Regards,
    Bhagyarekha.

  • Analysis Authorization in BO 4.0 Webi report

    Hi All,
    I am using BO 4.0 and creating connection from Information Design tool to a BW query using BICS client. This connection is then published to CMC.
    We are using SAP authentication and importing the roles from BW system. We have added profiles to this role and these profiles have Analysis Authorization set on Company Code. So one user can access data to one company code and vice versa. Now this works well in Bex Analyzer, but if I try to create a report in Webi, the analysis authorization fails. I went through the forum before posting this question and I found that is in 3.1 version and in most cases using SSO in universe connection solved the problem.
    However in 4.0 I am using BICS client and followed the same processes to create a connection but for some reason it doesn't work ? Is this suppose to work differently in 4.0 ?
    I have tried:
    1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
    2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
    3. Publish the connection to CMC with my Enterprise and SAP ID and in both cases it doesn't work.
    Please let me know if anyone encountered a similar issue and what is the best method to resolve this.
    (BO 4.0 no service pack or fix pack installed on the system yet)
    Thanks - Appreciate your help !
    Prasad Rasam

    Ingo,
    1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
    >> Correct you need to setup you OLAP Connection with SSO.
    >>> What I meant was I created the connections using both the methods, Using SSO it allows me to create a connection. The ID which I am using to create a connection has Admin access to BOBJ system. When I login as a regular user to create a Webi report and select this new connection, it throws an error message 'The DSL Service returned an error: com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer$CannotGetCubeFromConnectionException: Cannot get the cube from the connection'
    Using the other method to create a connection with User ID and password, I can create a connection and with the normal user login I can connect to the BW query but Analysis Authorization doesn't work.
    Ingo : Could you be more specific what you mean here with the different users ? When you say "regular" user are you referring to an SAP credentials or SAP BusinessObjects Enteprrise credentials ?
    2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
    >> The variable in the BEx query needs to be an authorization variable.
    >>> This has already been set as Authorization variable. There is still a question here. If I select the variable as Authorization variable, I cannot set the other parameters in the query properties such as Mandatory variable (as this is greyed out).
    Ingo : What other parameters would you like to configure ? Could you perhaps describe the scenario with more details ?
    regards
    Ingo Hilgefort

  • BW Analysis authorizations issue in BO Webi Report

    Dear All,
    I have one webi report which is on BEx Query-universe.
    Query has 6 authorization variables with ready for input(optional).
    User has authorizations for all 6 fields.
    But when we execute the webi report it is throwing error message  like" query do not retrive data"
    One of the  6 authorization fields has only few values , when we give " * " to this field the user can able to execute the report.
    Could  anybody tell me what is need be done here
    regards
    mhreddy

    Hi!
    Probabily the combination of authoriztions funcions are executing considering "and".
    See your configuration to considerer "or".
    Test one by one.
    bye

  • How to add A single row at the middle of the table in a Webi report

    Hi,
         I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
                                                    Thanks in advance
    Regards
    Monika

    Hi Monika,
    It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
    Can you explain in more detail what you are trying to do?
    Thanks

  • How to create a event at the time of scheduling a webi report

    if event fires then only it schedules the webi report
    give in a brief steps
    pls its urgent for me.

    Refer to the below blog
    http://scn.sap.com/community/bi-platform/blog/2013/01/07/cmcevents-in-business-objects-and-its-usage
    Thanks,
    Prithvi

  • Error while executing webi report

    Hello Experts,
    I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
    After putting these object when I execute the report i get following error:
    Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
    Can anyone suggest me how to resolve this error?
    Regards,
    Nirav Shah

    yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
    Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
    Thanks

  • Error when scheduling WEBI report to FTP server

    Hi
    We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
    Any help would be appreciated
    Regards,
    Anisa

    Hi All,
    I want a run my report once by scheduling, so i provide a time interval for scheduling a report
    start date/ time : 11:38:AM 10/30/2011
    end date/time : 11:43:AM 10/30/2011
    after completion of end time....report is failed and fetching an error
    Error : Object could not be scheduled within the specified time Interval
    Any solution for resolving this error

  • Error while creting webi report on top of query ,using BO XI3.1

    Hi,
    I'm getting below error while creating webi report ,tried to applying some patches but no luck
    SAP021_sales value report
    a database error occured ,the data base error text is error in MDD darasetBW.getcelldata.system error in program CL_RSR_MDX_BXML_FLATENING and form ASSIGN_COMP_02(see long text) (WIS10901)
    Looking forward to your sugesstions.
    Thanks

    hi,
    Go through the below SAP Notes on the issue-
    SAP OSS Notes 1440912 and 1432162

Maybe you are looking for