Distribution working differently for the same report

Hello all,
I created a template with 3 reports, each of which opens for 4 plants.
Then, when I schedule the offline distribution process, 2 of the reports are generated correctly for all plants, while the 3rd has a strange behavior. This 3rd report has 2 sheets and opens correctly for 2 of the plants, while for the other 2:
- in one sheet, the formulas are not converted to offline mode (like _epmOfflineCondition_ ) giving an "#Error, no current connection." message and the sheet is not protected; however, the report data is correct.
- in the other sheet, everything works ok and the sheet is protected;
Any thoughts? Thanks,
Ana-Maria

Thanks Ashok,
but unfortunately the above points are not applicable to the issue indicated:
1. Log off&log on has no effect since this problem appears on all PCs and always for the same data group.
2. The data group is available in the model cube and master data.
3. We are using the ADMIN user to execute the process so we have all authorizations (also, these are defined at Country level and only one Plant from a Country is not working).
4. The formula is correct.
5. Since the report executes correctly as a standalone report and works for other plants, I don't believe there is an issue with it.
The issue still persists.
Ana-Maria

Similar Messages

Why's the SQL format different for the same report on different PCs?

I have 2 PCs running the same version of Crystal Reports (11.0.0.1994) using an identically configured system DSN with the exact same driver. When I view the SQL that CR is using on PC 1, part of it looks like this:
" FROM {oj (("PUB"."LOQEstimate" "LOQEstimate1" LEFT OUTER JOIN "PUB"."LOQComponent" "LOQComponent1" ON ("LOQEstimate1"."Estimate-ID"="LOQComponent1"."Estimate-ID") AND"
On PC 2 it looks like this:
"FROM "PUB"."LOQEstimate" "LOQEstimate1", "PUB"."LOQComponent" "LOQComponent1", "PUB"."CustContact" "CustContact1", "PUB"."LOQSegment" "LOQSegment1"
WHERE"
It's the exact same report. Can someone tell me why the SQL is different?
TIA for the help.

Thanks for the reply, Patrick. Here are the answers you requested:
1. Verify you are indeed using the same driver, and they are of the same version
The driver on both PCs is the Progress OpenEdge 10.1A driver. The file is pgoe1021.dll, version 05.10.0037.
2. Verify if you have the same database client install on both computer.
Both use prowin32.exe, v10.1.1.1326
If everything is the same, then it might be a registry key, and in this case, can you provide the following information:
1. What database are you connecting to? ( Oracle, DB2, ... )
Progress OpenEdge 10 RDMS (/community [original link is broken])
2. What is the version of the database?
10.1A
3. What is the version of the database client?
v10.1.1.1326
4. How are you connecting to your database? ( Native, ODBC, OLEDB,... )
ODBC
5. If you are connecting via ODBC, what is the name of the driver used and it's version?
The driver is the Progress OpenEdge 10.1A driver. The file is pgoe1021.dll, version 05.10.0037.
6. What is the SQL query syntax do you prefer? ( PC 1, or the one generated on PC 2 )
The SQL generated on PC1 doesn't return any records. The SQL generated on PC2 does. Records are preferable ;o)

Balance Display are different for the same GL account in FS10N & FAGLB03

Hi,
It was noted that the GL account Balance Display are different for the same GL account in FS10N & FAGLB03.
Please advice what would have cause the matter.
Thank you,
Regards,

Hi Vani,
Think you are using version 6.0.
I had observed that TCode FAGLB03, displayes balances for particular Ledger (0L) leading by default.
While in FS10N there is no option for selecting ledger.
Try FAGLB03 with all ledgers one by one.
Add the total and then try to matc wiht FS10N.
Assign points of Good.
thanks

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

Auth: Restrict Infoobject for Queries differently for the same user

Hi guys,
I need to restrict an infoobject differently for some queries (analysis authorization). For example, I need to give full hierarchie access for query 1 to user 1. But for another query for the same user I need to restrict the hierarchie authorization. Furthermore, both queries are based on the same multi provider. It is not possible to use different multi provider ... the adjustment effort is to high (to many queries).
I have set up an authorization with rsecadmin
QUERY1:
ZHier1     Hyrarchie 1
ZHier2     Hyrarchie 2
0TCAACTVT     Activity in Analysis Authorizations
0TCAIPROV     Authorizations for InfoProvider
0TCAVALID     Validity of an Authorization
0TCTQUERY     Query
-->I added the respective values for the queries, the used multiprovider, hierarchies, etc.
I have set up the same for QUERY 2 with different Hierarchy and Query values, but it does not work correctly. The user is always authorized for the hierarchie values of both queries.
Thanks foryour helpin advance!!
Regards,
Sven

Hi Sankar,
Sorry for the confusion. Lets focus only one hierarchy ... ZHier1.
QUERY1:
ZHier1     -> value: node2
0TCAACTVT     -> value: 2 & 3
0TCAIPROV -> value: multiprovider1
0TCAVALID     -> value: *
0TCTQUERY     -> value: query1 (based on multiprovider1)
QUERY2:
ZHier1     -> value: node2.1 (sub node of node 2)
0TCAACTVT     -> value: 2 & 3
0TCAIPROV -> value: multiprovider1
0TCAVALID     -> value: *
0TCTQUERY     -> value: query2 (based on multiprovider1)
But this does not work. When I use query2 in reports the user has access to node2 and not only to node2.1.
Any idea?
Thanks again!
Sven

Repetitive Work Items for the same trip in UWL

Hi Experts,
Every time user clicks on save and send button , work flow gets triggered and work item is sent to user's UWL.
For the same trip no multiple workitem are appearing in approver's uwl.
Please suggest how we can restrict one work item at a time.
Regards,
Kamal

Dear Surjit,
1) Create a parallel fork, in the starting point of the workflow. In one branch put all the step which you developed.
It was already created.
2) In another step, create a "Wait for Event", in this call the change event.
I changed from Created Event to Changed Event.
But still the previous work item is not getting completed.
When I have checked in SWEL.
When I changed the Travel Expense then 2 events are trigerred.
i) Changed
ii) Created
Work Item is trigerred through Created Event.
Do we need to map the Work flow object with Events somewhere ?
Regards,
Kamal Rawal
Edited by: Kamal Rawal on Mar 26, 2009 11:43 AM

Sideways and Vertical displays different for the same song

When I play music on my iPod touch 4th generation, the name of the song appears normally in the vertical position, but the first word is omitted in the sideways display. ("Awake And Alive" displays as "And Alive" when sideways.) How can I fix this?

Hello Beverly,
Thank you for the question. I would be concerned too if I received two emails for the same purchase.
I suggest checking your purchase history in the iTunes Store to see if there are two separate charges listed for this song. Use the steps in the following article to check your purchase history in the iTunes Store:
iTunes Store: See your purchase history and web order numbers
http://support.apple.com/kb/HT2727
If you do in fact see two separate charges for the same song, you can report the issue to the iTunes Store using these steps:
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Find the full article here:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Best,
Sheila M.

2 data sources (oracle db) for the same report

Hi
I was wondering if I can have 2 sources (could be same or different instances). Example, I want to get information from one instance in the report trigger, and output of that i pass to the report (inside the query in the where clause).Is this possible with Oracle reports?
Any help appreciated.
Thx!

Hi Dan
Thanks for the response.
I need some information (in before report trigger) - from one oracle instance - and then pass this information as a parameter to the report - whose output will come from another oracle instance.
I haven't given it a try yet what you had recommended but will do so.
Thx!

Report navigation not working properly for the union report

i have a report which is union and i need to navigate to another report(detailed).the filters are not carried out to the detailed report .Please suggest me on how to get the filters ar e correctly applied on detailed report.I have prompted the fileds in the detailed report.

Hi,
Please refer to the below thread.
Re: OBIEE-UNION Request navigate is not working (Parameter value is not passed)
Hope it helps!
Thansk

Unable to get another schema for the same Report!

Hi All,
I've created a report with data retrieved from three different schema's, but when I add a fourth schema with it's name before the query retrieved and run the report, it gives me that: table or view does not exist!
Why does the report get the three schema's and refused the fourth one!? and how to solve the problem?
Note: I am using reports 6i.

HI,
Make sure the connected user has sufficient privilege on that table.
Regards,
Manu.

Why -Command behaves differently for the same command ?

I have a script called a.ps1 containing
exit 38
We can run this script in the following three ways and we will get three
different results. Can somebody explain what is going on? Why this behaviour?
References to good sources of information would be greatly apreciated.
PS> powershell -File .\a.ps1; $LastExitCode
38
PS> powershell -command { .\a.ps1 }; $LastExitCode
1
PS> powershell -command "& { .\a.ps1 }"; $LastExitCode
0
quilx

Hi Quilx,
I'm so sorry for missing your points, However, these information may be helpful for you:
The folowing is an example:
param($code=99)
exit $code
Save this in a.ps1 script file. Launch a cmd.exe and run your script
Powershell.exe –noprofile –file “pathtoscript.ps1” 1234
Echo %ERRORLEVEL%
This returns 1234 (or whatever code you submitted to your script when you called it). The reason why so many people have trouble with returning exit codes is that they miss the –file parameter:
Without –file, powershell.exe returns either 0 or 1. That’s because now your code is interpreted as a command, and when the command returns an exit code other than 0, PowerShell assumes it failed. It then returns its own exit code, which is always 0 (command
ran fine) or 1 (command failed).
Reference from:
Returning Exit Codes from PowerShell
Returning Exit Code from Script
Best Regards,
Anna

How to generate different report view in teststand for the same execution?

My requirment is to have two different view for the same report that gets generated during one execution using in TestStand OI(CVI)? One view would be summary view (displays only test step types, excluding action step types) and the other view is detail view that displays all the steps that are recorded. Data for all the steps needs to get recorded in database. Any suggestions are helpful!!
CLD,CTD

Hello.
I think you would have to create two separate reports, one as summary report and one as a 'full' report The viewers are just 'viewers' and simply display whatever you set to them.
I had display a text report that was basically a summary report ( failures only ) and then display an HTML report that contained all steps were set to be recorded. This required quite a bit of modifications on both the process model and the operator interface side. The operator interface (in LabVIEW ) had to contain 2 separate UIReportView controls.
Let me know if that is your desired direction and I could point you to some more ideas.
Thanks,
PH

Run a query multiple times in the same report for different nodes in Hier

Hi,
I have created a query as per my requirements. But my issue is I need to run the report for all the profit centers in a hierarchy. Right now I enter a node value of the hierarchy in the variable and I get the result. But I want to run it for each node in the hierarchy and display the result in the same report.Is it possible to do so in web using information broadcaster or any BI 7.0 tools. Has anyone done similar to this in web. I would prefer the web route rather than the excel but if excel is the only answer I will follow the excel path.
Looking forward to your suggestions on this.
Thanks,
Kal

Hello Kal,
if the number of Profit Centers is limited, you could probably work with query views (one for each PC) and include all these into your Web Template.
If this is not appropriate, I don´t know if there is any way of programming possible.
Regards
Cornelia

I'm stuck I've just been charged for the same purchase twice but when I go to report it, I get a message telling me that I can't connect to iTunes!;( I'm totally confused because I've done everything I could think of to try! Can u help

Please can you help me, I'm stuck!
It all start when I purchased some coins for the Facebook game bejewelled & it's gone down hill from there.
First after putting my password I got a message telling me my purchase was unsuccessfull then was prompted to put my password in again which I did & a message flashed up for a second saying something about my purchase being successful but not downloaded but soon after my coins appeared so I didn't think much more of that. UNTIL I got emails showing my purchase, which would fine as nothing is free but I realised I had been invoice twice for the same purchase, so I panick think how can I can my money back, so I clicked on the report a problem highlight in blue & I'm transferred to iTunes, after a short while a message pops up telling me I can't connect to iTunes.
I've tried lots of different ways to fix this but had no joy, I can't seem to get onto iTunes to get any suport either but it's still letting purchase stuff & look & purchase music & apps though iTunes, I've reset my device & also plug into my laptop, checked all my settings on the device etc:-
I've ran out of ideas, CAN YOU HELP!;)
Thanks

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Distribution working differently for the same report

Similar Messages

Maybe you are looking for