"distributions for this transaction are in the functional currency, but..."

I have this error that I am getting when trying to interface my projects billing to AR. I can't seem to fix it.
The error as shown: The distributions for this transaction are in the functional currency, but the
entered amount does not equal the accounted amount. Please recalculate the
accounted amount for this transaction and resubmit AutoInvoice.
I have checked the currency in the projects and the functional currency and they all seem to match in CAD which is what I am trying to bill out at. I am unaware of any foreign exchanged workers or expenses related to these projects.
Any clues?

Hi Dina,
Thank you for the answer.
I thought also at "Bill be Transaction Currency" but this issue appears on the projects only for one organization, on other organization (same setup) it doesn't appear.
Even more:
- this issue doesn't appear on all the projects on the same organization (projects with the same characteristics);
- on an earliear back-up instance (three month ago) the issue appear for project A and it doesn't appear on the production instance (same setup for project A for both instances).
I don't know to be any patches differences between these two instances, I checked up the setup for PA ... what else should I look for to explain (or correct) the issue?
Regards,
tinar

Similar Messages

  • SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

    SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
    on IE to go to the previous page. Then it catch the error as:
    Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
    Details: Error parsing near '
    <!DOCTYPE html PUB'.
    I am using SQL2012 and Sharpoint2013.

    Hi Alisa,
    Thanks for your reply, I changed the web.config, but the issue did not resolved. 
    I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
    This issue can not reproduce on Chrome only occur on IE.
    So, do you have some details suggestion for me to fix it?
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <configuration>
    <configSections>
    <sectionGroup name="SharePoint">
    </sectionGroup>
    <location path="_layouts/15/TA_AppMonitoringDetails.aspx">
    <appSettings>
    <add key="ChartImageHandler" value="storage=memory;timeout=20" />
    </appSettings>
    </location>
    <location path="_layouts/15/ReportServer/RSViewerPage.aspx">
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    </appSettings>
    </location>
    <system.net>
    <defaultProxy />
    </system.net>
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    <add key="aspnet:RestrictXmlControls" value="true" />
    <add key="FeedCacheTime" value="300" />
    <add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
    <add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
    <add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    </appSettings>

  • Covers for my albums are in the Itune store but it will not load them.

    How do I get the album covers for albums I own from the Itune store if it won't automatically load them? any help would be great.

    On the albums that will not work with everything else suggested above, I get the artwork manually by searching on google for the album. When I see the album cover I will right click on the cover and and choose "save image as". After I save the image to my pictures directory I then go in to get into in itunes and manually attach the artwork. Right clicking on artwork in itunes store does not work.

  • I am writing a program that needs to draw gradient lines according to the points that i touch on ipad. For this i am using "DrawLinearGradient" function. But the 2 colors that i am giving for drawing gradient is not dividing equally in the complete line.

    Can anyone please help about the parameters that need to be passed corectly.
    CGColorSpace colorSpace = CGColorSpace.CreateDeviceRGB();
    CGColor[] colors = {UIColor.Red.CGColor,UIColor.Green.CGColor};
    float[] locations = {0.0f,0.5f,0.5f,1.0f};
    CGGradient gradient = new CGGradient(colorSpace,colors,locations);
    ColorMessage.FontSize = width;
    context.SetLineWidth(width);
    context.SaveState();
    context.Clip();
    context.DrawLinearGradient(gradient,penVertices[0],penVertices[count-1],0);
    context.StrokePath();
    gradient.Dispose();
    colorSpace.Dispose();
    context.RestoreState();

    Wouldn't this be better posted in a developers forum? This forum is for Using an iPad, not writing programs for one.

  • No authorization for this transaction with mvt type 101

    Has anyone seen this error:
    RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120      
    RFC BAPI Wrapper call:You have no authorization for this transaction with mvt. type 101
    RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120      
    The strange thing is that when I assign user with a different Personnel Number and it works just fine.  But when I switched back to his Personnel Number, then I get above error.
    Even though I don't get any order list but I got all notifications and technical objects.
    Also, this user has same roles with everyone else.  While everyone is working fine this user is the only one that getting the error and no order download to PDA.
    Regards,
    Dai Ly

    Hi,
    please run ther getlist and getdetail handler in the backend directly for that user - most likely you will get a better failure message there.
    Nevertheless - what Application  yre you using? Is it MAM? If yes, check the SPRO setup for this particular user,
    Regards,
    Oliver

  • Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

    Printer : Officejet Pro 8600 Premium. model CN577A
    OS : Microsoft Windows 7 Home
    Basic 64
    How is your product connected to your PC? : Network
    Problem description : In Device Manager I've got an error message with the
    Officejet pro 8600 icon - "The drivers for this device are not installed.
    (Code 28)
    There is no driver selected for the device information set or element." I
    have uninstalled and re-installed the driver to no effect. The printer
    appears to be functioning properly.
    This question was solved.
    View Solution.

    Hello, 
    Yes, i too would suggest a clean re-installation of the software.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • T440s - Enhanced functions for this application are available

    Every time I open one of the Lenovo apps like like Support or Companion, I get the message "Enhanced functions for this application are available".  I click the message, a browser opens up, I download "dependecypackage.exe", I install, setup asks for a restart and I let it, and the process repeats again and again.  I keep getting this "Enhanced functions..." message.  It is driving me crazy.  How do I end this cycle?
    T440s
    i5-4300U
    4GB RAM
    256GB SSD
    Factory Win 8 upgraded to Win 8.1
    Solved!
    Go to Solution.

    Hi larrykl,
    Try manually installing the latest version of Lenovo Settings Dependency. You need both Lenovo Dependency and Lenovo Settings Dependency for all the Windows 8 apps to work.
    Tell us how it goes!
    I don't work for Lenovo. I'm a crazy volunteer!

  • The schedules for this line are incomplete

    Hi,
    I'm attempting to create a PO in the vision EBS 12.1.3 apps instance..Logged in as 'operations'. When I click on the 'Approve' button, I get the following error which I'm not sure what it means and where I should start to debug:
    The schedules for this line are incomplete. I thought I covered all the necessary fields...
    Any ideas?
    Thank you!

    Please see ((Pics) How to Capture Debug / Log / Trace Files During the Purchase Order / Requisition Approval Process? [ID 409155.1]) for the steps you need to follow to debug the issue.
    Thanks,
    Hussein

  • Mac OS X 10.7 drivers for HP LaserJet 1300: installation at the "Add Printer" process ended, every time, with message "Currently drivers for this printer are UNavailable..."!   PLEASE HELP?

    APPLE [see Apple Support's Article HT 3669] says Mac OS X 10.7 (Lion) has drivers for this Printer. 
    But, every time I've tried installing it to my Mac Book Pro (which came with OS X 10.7), it does recognize that the Printer (connected via USB cable) is HP LaserJet 1300 -- in fact, right below, this statement appears: "The drivers for this Printer are available...".  But, when it comes to the actual process of downloading, the "Add Printer" window -- after 20+ minutes of its "searching" for the drivers -- always ends with the message: "Currently drivers for this printer are UNavailable... contact the manufacturer."!!!  (Can you imagine? Apple says it's available... but its own "Add Printer" process says it's UNavailable!)
    I went to HP's support site, and it, too, says that drivers for this Printer are available!  -- see the 2 links:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=4152639
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&tmp_track_link=ot_ faqs/top_issues/en_us/c02915680/loc:4&cc=us&dlc=en&lc=en&product=4152639#N507
    Can somebody help me?  Would very much appreciate it.

    You haven't installed any of the Photoshop updates for CS5.
    Go download and install the updates.

  • Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Exception in Payment Proposal - Pmnt methods for this run are not specified

    Dear all,
    I want to ask if it is possible to run a payment proposal for AP transactions together with AR. The AR line items are used for clearing. Actually, this is the first time we execute proposal run which contains AP and AR respectively. And during the proposal, AR line item is an exception - 'Pmnt methods for this run are not specified in the master record or in item'. We already checked the master record, and there is a payment method. However, it was not captured during the payment proposal. Does it have something to do with the Document Type?
    Thank you once again for all your usual support.
    Regards,
    April

    To: Karthik, pushkaraj, JeCcas_DJ
    Thank you very much for your responses.
    I've checked already FBZP and Customer Master Record, payment methods were defined. Also, during the payment run, all line items have the same payment method, but only the AR transaction was not accepted.
    I think the problem is the same as what pushkaraj mentioned. We have payment method 'D' defined only for outgoing payments and not for incoming payments. I guess that is the problem.
    By the way, can I create another entry 'D' for payment method-incoming payments? Would there be conflict if I assigned same ID?
    Regards and thank you once again...
    April

  • RDS 2012 R2: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the (name-of-service) service

    Hi guys,
    On a random base (daily, weekly) we're experiencing major log-in problems on our Windows Server 2012 R2 Remote Desktop Services farm. The VM's are hosted on Hyper-V 2008 hosts and we're not using Citrix techniques etc.
    Users are reporting that they cannot log-in, the log-in sessions hangs with a blank screen when loading their user profile (e.g. Please Wait For The User Profile Service).
    In the System event log of the server on which the user is logging on the following errors are shown:
    Source:        Service Control Manager
    Date:          23-12-2014 7:28:01
    Event ID:      7011
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    …and after 30 (or sometimes 60) seconds, the same error only another service (in random order):
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    …and after exactly 30 seconds, the same error only another service:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxmSms service.
    etcetera, with the following errors:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndPointBuilder service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
    The Portable Device Enumerator Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the TrkWks service.
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
    These errors are logged continuously.
    An administrator cannot solve this since he isn't able to login in as well (console or remotely), only a hard reset of the VM is possible to use the affected server again.
    I took different steps to solve this problem without any success, like:
    - Installing the latest Windows updates
    - Removed unnecessary printer drivers, print monitors and print processors (no local printers/drivers are installed, only Remote Desktop Easy Printer driver is used)
    - Searched different forum posts, but found only hotfixes for Windows Server 2008 R2.
    Can someone please help me with this annoying problem?
    Many thanks!!
    EDIT:
    Of course is increasing the time-out not really an option here... http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx

    Hi Jeroentjuhh,
    1)Do you see this problem on all VM's or only on Windows 2012 R2 server?
    2)Are these VMs' in hyper-v cluster?
    3)Do you see event id 56 or 50? Please see the below link if it helps you to resolve these events.
    http://blogs.msdn.com/b/scstr/archive/2012/02/29/how-to-troubleshoot-the-terminal-server-security-layer-detected-an-error-in-the-protocol-stream-and-has-disconnected-the-client-client-ip-and-the-rdp-protocol-component-x-224-detected-an-error-in-the-protocol-stream-and-has-d.aspx
    Thanks,
    Umesh.S.K

  • Why most of SAP Standard transactions are written in function pools

    Hi Forum Experts,
    Why most of SAP Standard transactions are written in function pools instead of a normal module pool program? ( In the case of Standard tcode function pools, it is a collection of a large number of funciton modules, includes for forms used by function modules, and screens. Why is it so? ).
    Quick response will be appriciated.
    Thanks in advance.
    Regards,
    Harikrishna Indugu.

    because these functino pools contains so many function mudules and these function modules are used in other transactions also...
    thats why....
    reward points if useful....

  • EWA" Dates for this session are overdue "

    Dear All,
    Im now configuring EWA report but i always got Red Flag for the satillite system said that  "Dates for this session are overdue"  and there is no two bottle apear.  please help me..
    Thanks so much.

    Hi,
    That error is because your managed system is not sending the required EWA data to your SolMan for processing.
    Please check the following to make sure all steps are correct for EWA processing:
    Check RFCs in Solution Manager to your system that the EWA is for.
    Also check the Back RFC to SolMan in the managed system.
    Also check in the managed system, transaction SDCCN and make sure the maintenance package is running and scheduled periodically!
    Finally ensure the Task Processor is active and scheduled in SolMan via transaction SDCCN > Goto > Settings > Task Processor.
    Lastly check in the managed system that the RFC for the maintenance package is set to your SolMan via transaction SDCCN > Goto > Settings > Task Specific > icon next to RFC Destinations > Settings. Ensure the Back RFC to SolMan is set as the master.
    To do this, go to SMSY in SolMan > Environment > SolMan Operations > Administration SDCCN and ensure your managed system is there and SolMan is the master.
    You may even have outstanding jobs for this system in SDCCN of SolMan which you can run to process the EWA data if you do not have a periodic Maintenance Package correctly running in SolMan.
    All of these checks will solve your issue and make sure EWA is working.
    If you find the answer, please post what the mistake was, I am curious
    Regards,
    -Rohan
    Edited by: Rohan Parikh on Dec 9, 2009 4:42 PM

  • Further error messages exist for this transaction

    Hello all ,
    i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external  number ranges
    please help me out how to solve this.
    Regards
    Ahmad

    Hi Mohammad,
    There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
    Thanks,
    Prem

Maybe you are looking for