Ditribution cycle with WBS as sender

Hi Friends,
We have support project cost cost booked on WBS elements , we want to allocate that costs to some cost cost centers.
We created 1 distributiion cycle having the WBS as sender & cost center as the receiver.
but when we run the distribution cycle, the cost is not getting distributed. the sender is not recognized when we run the cycle.
We are having message " Cycle PA01IND002, start date 20100101, does not include any senders."
kindly help.
Thanks & Regards
Bhairavi

HI,
SAPNET note 605281 describes what to do to enable allocation cycles to use WBS-element as a sender, I assume this is correct implemented in your system.
Check the sender master data / transaction data. Follow SAPNET note 64805 (point 4) for detailed analysis of the case (report RKACSHOW).
Best regards, Christian

Similar Messages

Unable to create the Distribution cycle with WBS Element as Receiver

Dear SAP Friends,
I am creating the Distribution cycle in KSV1, Sender is Cost center and Receiver is WBS element.
Once i select Receiving tracing factor Tab i am getting the error like :
Message :
No valid receiver entries exist
Message no. GA015
Diagnosis
You have established a group of receivers by entering either intervals or groups in the selection criteria. However, in the master data check, the SAP System cound not find any valid receivers in your selected group.
System Response
The single value entry screen is not shown.
Procedure
Check your entries for the selection criteria. It is possible that the master data is locked. You can get more info be choosing "Error log...".
Please let me know how we need to create the Assesment cycle for WBS elements as receivers and Cost centre as Sender.
Let me know in this Regard ASAP..
Regards,
Anand

We are encountering a simiilar situation related to Cost Center Assessements to a Work Order (Order Category 30) I'm thinking the promble is related to a similar situation that you had with a WBS.
Thanks,
Lou

Material Purchase Requisition with WBS from Projects

Hi ;
As per our client requirement we need to create Material Purchase Requisition with WBS Element Material .Can Some one send me the procedure .
Thanks in Advance ;
Joydeep Mukherjee

HI Joydeep,
This is not possible in PS via CJ20N transaction to create material PR without activities. This is standard SAP restriction, i guess this cannot be changed.
You can use ME51N by account assigning to Project / WBS element, then system will allow you to create.
This is kind of two different functionalities we have to create PR for WBS element / Project / Network.
Regards
Terence

Invoice posting error with WBS element

I have created purchase order with account assignment category P with WBS element. Quantity 2 numbers and unit price 10000Rs. I checked WBS element in this u201CAVAC Availability control activeu201D check box is selected. Now I am trying to post invoice for this PO with amount 25000Rs with tax amount 1200Rs but getting an error saying u201Cavailability controlu201D cannot post invoice. Help me in this regard
GP

Hi,
It would be a great help if you would send the error code from the error message.
Kind Regards,
Arminda Jack

My iMac drops settings information. Sounds associated with receiving and sending an email disappear after about a week and return following a restart after a shutdown. Also my picture taken, which was taken about a year ago, recently disappeared.

My iMac drops settings information. Sounds associated with receiving and sending an email disppear after about a week and return following a shutdown and a restart. The cycle contunes. Also, the picture of me that was taken when I bought the iMac more than a year ago and appeared at logon recently disappeared and was replaced by a soccer ball. I took a new picture, which appeared for about a week at logon, and it has now been replace by a blank picture.

The standard procedure with these types of isues is a PRAM reset.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379

Excel Sheet with WBS

Hi ,
i have attached an excel sheet with wbs after that when i change contents or write something and when i saved it the sheet is not changing . i have unprotectd the sheed ,
can anybody clear me what is the problem
Thanks in advance
Regards
Rama Shanker Sharma

Hi,
Would you please share your experience to solve this problem?
Recently, we got the same problem.
Thanks ahead,
Ecco

Vendor Payments Report with WBS Elements

Dear Expert,
I am looking a report for Vendor outgoing payment against WBS Elements.
Is there any Vendor Payments report with WBS Elements in SAP? I have seen FBL1N but WBS Elements field is blank.
Thanks
Samiee.

Hi,
You mentioned WBS Element is blank; so please check in any one sample payment documnet whetehr WBS is maintained and if yes find which field it is populated. For eg; sometimes people populate this information in the text or assignment field. If that is the case then change the layout accordingly in FBL1N.
Regards
Sreekanth

Goods Receipt against Purch Order with WBS not posted qty in Project Stock

Dear Gurus
We have recently implemented SAP in our company. One problem which we have encountered is at the time of GR of material against Purchase Orders with WBS assignments. Our requirement is that the goods at the time of GR should undergo the QM process and after Usage decision in QM, it should be available in project stock till the time we consume the material.
Contrary to above, the current behaviour of the system is that at the time of GR, the quantity on order is reduced by the GR quantity but nethier the project unrestricted stock nor the project quality stock is updated. Apparently it seems that the stock is consumed immediately at the time of receipt.
It will be appreciated, if any one of you can advise on above.
Muhammad Asif Nakhuda

Hi!
As Nag has correctly pointed out, the account assignment should be 'Q'
Consumprion also occurs if you have acct assignment category as 'N'
Now, if you are raising the PO with reference to PR that is thru PS, hen select Item Category 'L' (stock item). This will
trigger the acct assignment category 'Q'
Regards

Upload of opening finance balances with wbs elements

Hi Gurus,
Appreciate if you can please share some knowledge on taking opening FI balances including open vendor and customer invoices with wbs elements..
We are going live in mid year and p&l items should reflect data of prior periods in the fiscal year...
Now question is how can we see project wise details in finance of already running projects?????
If we enter wbs in gl, customer and vendor lines then how will data come in cost and profit center, as project settlement is required to settle on cost center????
Whats is ideal way to handle such situation??
One more thing to add that we have activated document splitting on profit center.....
Please reply back
Thank you

Hi,
if those WBS are statiscall there will not any settlement even if you pass the WBS in docuemnt level if you don't maintain settlement rule it won't settle it. one more option pass the WBS in a/c doucment text filed or assignment then you can easily find it out .
Regards,
Raman

Order to cash flow cycle with navigation

hi everybody
please can anyone of u guys help me to make me understand the order to cash cycle with navigation and preferably screen shots my e mail is. [email protected]
i will be thankful for the help offered
regards

Dear Ragav Velichetti,
Can you please also help me with the presentation. My mail id is [email protected]
Thanks a lot.
regards,
umamaheshwaran

Attach GOS attachments with a standard send mail functionality

Hi Folks,
I am here after long time and need your help.
I have a requirement where I need to attach document with a standard send mail functionality.
Below is the details:
From Quality notification 'Action Box', if the user select a perticular action (it is similar to web link), the system is sending a mail to an external mail id provided by the user (In a popup). This mail send is happening through a SAP standard functionality.
Now the requirement is, I need to attach selected file from GOS (generic Object Services) and attach them to the mail. Sending mail should happen through standard functionality.
I want to know below two points:
1) How to get selected files from GOS attachment?
2) How to attach them to mail? (only attach, sending will be done by standard functionality)
Hope I am clear with the requirement.
Please help me to get it resolved.
thanks,
Surajit

1st - analyse fm SO_ATTACHMENT_LIST_READ and table SOOD
and function groups sgos* and SOB2
hope that helps
Andreas

E-Mail in iOS 7.0.2 with massive problems sending big e-mails

Dear all,
i have massive problems in sending e-mails with attachments using iOS 7.0.2 on an iPhone 5s using iCloud E-Mail services.
If i try to send more than one photo done with the iPhone, it is just sending and sending, but after an endless time nothing got sent. Even if i am connected via WLAN to a fast VDSL connection, sending of big e-mails (somewhat about 4 or 5 MB) does not work.
Additionally the push e-mail is not working correctly (located in Germany) and the time plan for receiving e-mails does not work sufficient either. I just have download e-mails manually.
Does anyone else have this problem with sending bigger e-Mails?

Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone. Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR. I don't want to do any of that. Just my phone number. Is this possible?

Hi,
The first run of Messages will ask you to enter an Apple ID to "register' with iMessages.
If you do not do this but open the App and look in Preferences > Accounts then you will see the iMessages account and the Bonjour Account which will not be activated.
Neither of these two account can be deleted. (even if not being used)
If you then press the + icon to add you will get the choices you posted.
To iMessage you need to "register" and Apple ID with the iMessages service.
As Diane then points out you can link this to your iPhone number.
This "syncs" (Displays on all devices) the various iMessages sent to either iPhone or Apple ID
You can then chose on both iPhone or Mac version how or which ID/Number is going to be used to "Start the conversations from"
I have my Mac version set to start from my Apple ID and the iPhone from it's number.
At this moment the Mac version cannot send SMS text messages to an iPhone.
This is apparently coming with iOS 8 and OS 10.10 (Yosemite)
An AIM account can send SMS Messages but only to a limited number of USA based phone users on these carriers.
(Basically you add a phone number with country code +1 as a Buddy to your List)
Mocked up number (It not really an auto responder although you do get sent back and Error message about it not being valid)
8:37 pm Sunday; July 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Receive a mail with attachment and send it as it is via Mail-receiver

Hi,
we have PI/7.0
I have a scenario with a mail-sender.
I get mails with attachments and depending on the subject I have to send some mails to an other mail-address via mail-receiver-adapter.
My problem is, that I have to send it "as it was" - with all attachments (and the correct attachment names) and the original mail-body.
I tried to check the checkbox "keep attachments": I got all attachments but the original mail-body was now an extra attachment (with the extension .xml).
I don't wanna have this new attachment!
What can I do?
Thanx a lot!
Regards
Wolfgang

Hi,
I think quite simple
message protocol: xipayload
Use Mail package: NO
Keep Attachments: YES
Content encoding: <nothing>
No extra modul
I entered all address-informations (from, to,...) in the fields displayed after the checkbox for "use mail package".
that's all.
regards
Wolfgang

How to Test, Inbound idoc ,with out the Sender System, using a Text File

Hi Guru's .
we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
on the same client.
we wanted to test this idoc with text file from our local machine.
Can anyone give us detail steps.like how to create File layout
with Segment name,and values for the fields.how to pass this file to the system.
Thanks in advance.

Hi Aparna.
My requirement is to test the idoc with Inbound File.
Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
when i am trying to do this syst complaing about
Partner Profile not available, and some times
port not available. and some times with
'No further processing defined'.
but i maintained part profiles and port perfectly.
Can you help me in testing with test 'File' port.

Ditribution cycle with WBS as sender

Similar Messages

Maybe you are looking for