Dividing large Flash Videos Movies into smaller ones that play in sequence

I need to know how I can take a large flash movie and divide
it into two or more smaller ones that play in sequence in order to
speed up initial download time. I have the swfsequencer plugin but
I do not know how to use it.
Can anyone please help me with this?

http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00002980.html

Similar Messages

Dividing long files into smaller ones

I am using Adobe Premiere Elements 12 on a windows 8 PC. I've been trying to transfer old VHS tapes to several DVDs. My real problem is separating the large contiguous video files into several smaller files to be arranged on several dvds. How do I do that? I know how to cut the videos into several clips, but not files. The original VHS tapes have 3-4 hours on each tape so that doesn't directly translate to available DVD space.

MacGyver82dan
Just in case note, you cannot import one Premiere Elements project file (.prel) into another.
So if you already have several project files, each with its own group of files and want to combine them into one grand project for a DVD (DVD-VIDEO or AVCHD), then you are going to have to export the contents of each project prel and import the exports into one grand project.
The export from a given project.prel can be for the entire Timeline or for selected portions of it. But the only way out of the project is via export. In this situation the export settings for the individual project files should be consistent with the settings for the grand project which will generate the end product.
To export a segment of a Timeline content within one of these project files, two essentials
a. the gray tabs of the Work Area Bar must be set to span the segment for export
and
b. the option "Share Work Area Bar Only" in the export settings must have a check mark next to it.
When your Premiere Elements is running on a Windows computer, there is an opportunity for a copy/paste insert between projects.
Please review the details of that if that sounds of interest.
ATR Premiere Elements Troubleshooting: PE: ClipMate Copy/Paste Between Projects
Please let me know if I am targeting your questions. If not, please give more details, and I will modify my reply accordingly.
Thank you.
ATR

Splitting large video files into small chunks and combining them

Hi All,
Thank you for viewing my thread. I have searched for hours but cannot find any information on this topic.
I need to upload very large video files. The files can be something like 10GB in size, currently .mpeg format but they may be .mp4 format later on too.
Since the files will be uploaded remotely using using internet from the clients mobile device (3G or 4G in UK) I need to split the files into smaller chunks. This way if there is a connection issue (very likely as the files are large) I can resume the upload without doing the whole 10gb again.
My question is, what can I use to split a large file like 10Gb into smaller chunks like 200mb, upload the files and then combine them again? Is there a jar file that I can use. i cant install stuff like ffmpeg or JMF on the clients laptops.
Thank you for your time.
Kind regards,
Imran

There is a Unix command called split that does just that splits a file into chunks of a size you specify. When you want to put the bits bact together you use the command cat.
If you are comfortable in the terminal you can look at the man page for split for more information.
Both commands are data blind and work on binary as well as text files so I would think this should work for video but of course check it out to see if the restored file still works as video.
regards

Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks

Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks

wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck?

Preloader Countdown (5...4...3...2...1) for Large Flash Videos

My website progressively downloads some large flash videos.
The videos appear jumpy for people with slower internet
connections. Does anyone know of a way to create a preload
countdown (like in movies) that would give the video some more time
to load?

Hi
Not as a transition but as You got iMovie HD 6 there might be a plug-in that does this
(in FinalCut Express or Pro when export back to Camera this can be selected)
Stupendous software http://www.stupendous-software.com
GeeThree http://www.geethree.com
cf/x. http://www.imovieplugins.com
Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
http://www.imovieplugins.com/fxhome.html
Yours Bengt W

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
WDS network
If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

Xcode is running from a volume that does not support ownership. Please move Xcode to one that does.

I have Problem, I can't install Xcode 6.1 on my iMac due "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
I have two HD partition, First one I use for my Lion OS, and the second I just installed Yosemite since Xcode 6.1 need OS upper than lion.
Here's my HD Info.
Mac HD : Yosemite
Machintosh HD: Lion
I do try to uncheck and check when I install Xcode. Maybe I don't know where should I put Xcode.dmg when I want to install.
Thank you. Sorry bad english.

Run Disk Utility select the volume you are installing Xcode on and look at the bottom of the screen and make sure Owners Enabled: says yes.
Also make sure there are no other versions of Xcode anywhere on your system. If there are delete them all and then do a fresh download and install of Xcode, BTW why are you nor installing from the Mac App Store, where did you get the dmg from?
post back if that does not resolve the issue.
regards

Splitting a large video file into smaller segments/clips using FCE

Is there a way to split a large FCE / iMovie Captured event into smaller segments/clips.
Am attempting to convert my home videos ( Analog: 8mm) into iMovie clips.
Used a ADS Pyro that converts my composite signal ( RCA: Yellow+Red/White) to a digital signal via Firewire using the iMovie capture. However, this creates a single 2 hour file that takes approx 26Gb because there is now DV information.
I would like to (a) Break this into smaller segments/clips then (b) Change the date on these.

afernandes wrote:
Thanks Michel,
I will try this out.
Do you know if this will create a new file(s) ?
http://discussions.apple.com/thread.jspa?threadID=2460925&tstart=0
What I want to do is to break up my 2 hours video into smaller chunks then burn the good chunks as raw footage ( AVI/MOV) onto backup data DVDs. Then export all the chunks into compresssed files (MPEG-4?) and save these on another data DVD.
Avoid to compress. Save as quicktime movie.
Michel Boissonneault

Dividing an enormous library into smaller ones

My iTunes library is 650GB and growing. (all my own CDs but going the modern route). I think it's beginning to be a problem when loading as a shared library and also with iPhone's SimplifyMedia gathering it's information.
I'm thinking of separating out to genre specific individual libraries. I can call up a specific genre; opera, for example - but then what do I do to make that a separate library?
Another useful answer might be: is it detrimental in other ways, other than time to load, to maintain one library that large? (these are Apple Lossless quality)
much appreciation in advance. Thanks.
Message was edited by: Eddie Strauss

If you need everything to be sequenced as a single video, you
can load the video using netStream, set the buffer time, and allow
Flash to stream the video. You "could" place 2 loader components on
the stage with instance names of cpLoader1 and cpLoader2, have the
first part of the video load into cpLoader1 while making
cpLoader2._visible=false. After the first part of the video has
completely loaded into Flash, you can begin the loading of the 2nd
part of the video into cpLoader2. Since it's invisible right now,
nothing will show. Use script to determine when playback on the
first video is complete, make cpLoader2._visible=true, then start
playing video 2 while making cpLoader1._visible=false. After video
2 has completely loaded, begin loading the 3rd part of the video
into cpLoader1, and so on. By doing this, you may experience a
little jump in between the end of a video and the beginning of
another, but this really can't be helped because you are relying on
Flash to seamlessly end and begin videos within 1 frame.
Search in Flash's help files or look online for more on
netStream.

Sub Dividing BIG Library into Small Ones..Scared to erase.

I have a single 3tb Library after updating to 10.1
Im trying to now sort into smaller libraries.... Iv created new ones and MOVED Events and Projects into these libraries.
( I TICKED ON ... Move Proxy and Optimized data.)
Its still saying that the original Library is close to 3tb.?
Im scared to erase this in case its the originall files....
Ant thoughts.? much appreicated.
ROB

It is probably there, but you are right to try before you erase stuff!
Close the big library, and use FCP X with only the new libraries open, and make sure everything is there.
As a side note: optimized media is usually what uses most drive space; often you don't need it, and you almost certainly don't need to have both optimized and proxy media at the same time. In your situation, I would have chosen NOT to move (or copy) the optimized and proxy. It can be recreated when - and if - needed.

Flash video loaded into FLV Player choppy

I just upgraded to Flash 8 tonight, so I'm a little bit of a
newbie as to the new FLV Player that's included (so cool though!!!)
I was supposed to add a Preloader to a client's file tonight
and got nowhere :(
The Flash video that's being loaded into the FLV Player is
choppy and I can't figure out how to add a preloader. I tried the
AS from the help file, but it didn't work out. I'm assuming this AS
is not for use with the FLV Player?
Any help is GREATLY appreciated. I'm at my wits end with this
and confused as to why I can't preload the movie. The preloader
just blinks for a second, then the movie plays but it's large so it
gets choppy every now and then.
thanks!

Actually I did try setting the buffer to 10 and it didn't
correct the problem. Tried adding the suggested FLV Preloader but
it doesn't work with this instance (component loading external
movie file) so I ended up having to use a different FLV Player
altogether and it worked fine. Seems like there is something wrong
with the built-in component -i f another FLV Player works perfectly
without any additional programming or tweaking and was developed by
an outside source (other than Adobe.)
Thanks for your reply though.

Can I break up a video project into smaller projects using prel 10?

I've created a large video project in prel 10 ( the 0s is win7). I want to break it up into smaller new video projects so I don't lose all my existing assembly and editing work. Can I do this and if so how? Thanks

Keep the original project and do a "save as" with a different name for each individual project and just delete what you don't want from each smaller project.

Cutting QT movie into smaller segments

I'm new at this so if this is a typical newbie question I ask your tolerence. I've looked through the archives about sub-segments but haven't found what I need. I'm trying to cut a QT movie file into smaller segments so I can rearrange the order of things. I'm unsure how this "make subsegment feature works. Do I have to make new In and Out points one at a time, then make each one a subsegment or do I make the primary sequence a subsegment then work on the subsegmented piece, placing new In and Out points in it?
Powermac G5 1.8 Mac OS X (10.4.9) Got Ram out the ***

I'm trying to cut a QT movie file into smaller segments so I can rearrange the order of things
That's what editing is all about...
Do you mean you're trying to edit? in FCP? or you want to cut up your QT files outside of FCP?
I think you might have to do a bit of reading about basic 3-point editing techniques.

Logical sql firing larger aggregate table instead of smaller one

Hi
When we process a request containing one particular column alone along with some time dimension say month or year, the logical sql is firing larger aggregare table instead of smaller aggregate table. Please, help us in resolving this issue.
The OracleBI version we are using is 10.1.3.4.1
Thanks.

Hi,
Try posting in the OLAP forum.
OLAP
Thanks, Mark

Splitting pdf doc. of amauntaneos number of pages into smaller one document

I am mew to adobe pro and I would like to get to know how do I split a pdf doc of 254 pages into smaller documents , foe example of 10 pages to be able to send it by mail. It is coherent pages- those of 254 pages.
Thank You.

Your link dont work h e l l o

Dividing large Flash Videos Movies into smaller ones that play in sequence

Similar Messages

Maybe you are looking for