DivX Codec issue QT 7 Pro

Have installed DivX Pro 6.4 and all works fine. Installed Quicktime Pro 7 afterwards and all works fine. However when I try and play any DivX files within Quicktime I get told that the Codec is not installed and follow the link back to the DivX site to download them.
I have checked and the DivX files work in Windows Media Player so the Codecs are all there. Why is it that Quicktime cannot see them. I have look around on the apple web site to find assistance on how to install codecs from within Quicktime but cannot find anything that relates to a PC.
Why do I want to do this because I need to get my movie files on to my iPod and believe this is the only way to transfer them correctly

I'm also looking for a way to import a codec into quicktime.

Similar Messages

Elements problem after divx codec install

hi all,
I am having an interresting problem and I am hoping someone can give me some advice.
I have been running Premiere Elements 8 for a while and a it has been working fine. a few days ago I tried to install the divx codec. Now I open Premiere Elements and it will open, load my project, then minimize and I can not get it to restore.
I have uninstalled divx but no luck.
I also did a windows system restore to a previous state but had no luck there either.
I am running Windows 7 64 Bit.
on a quad core Intel Q6700 processor
intel motherboard
8 GB of Ram
ATI FirePro V4800 (FireGL) Video card
dual monitor.
I am suspecting the codec updated a driver somewhere that is causing a conflict.
I had similar problems with Photoshop elements 8 and had to disable my twain drivers to get it to work.
any comments or suggestions would be appreciated.
thanks;

Welcome to the forum.
I have used the DivX CODEC, plus the DivX Pro Encoder for years, with zero issues, until the most recent update of DivX with both its CODEC and its player. Did not update the DivX Pro Encoder.
First, these problems have not affected PrE 4.0, running on XP-Pro SP3, so there ARE many differences to your setup. With those differences, I am not at all sure that my observations will apply to your installation and your system.
The only problem that I encountered was that the DivX player seized the File Type Associations for all AVI's, so that Dbl-clicking on any, would always Open them in the DivX player. The new one is filled with ads for all sorts of things, and reminds me of the old RealPlayer from years ago. Also, those ad often lead to a dead-end, from which the only recourse is to buy whatever the ad features, or go to Task Manager and Kill the process - really, really bad move DivX. All it took was going to Control Panel>Folder Options>File Type and changing the AVI associations back to my desired player, MediaPlayer Classic HC. Fixed.
That was my only issue with any version of the DivX CODEC, or the DivX player. Still, I made note of it.
That does not mean that on your system, and with PrE 8, something in there might not have broken.
I would check the file associations in Control Panel, and reset any, that DivX Player might have changed, then test.
While you are at it, also update both your video driver and your audio driver, from their mfgr. Web site.
Good luck, and maybe others will have tips or suggestions.
Hunt

Codec for Final Cut Pro

I am converting a DVCPro video tape using a tape copy service (my tape drive died). I plan to import the DVD file into our PowerMac with Final Cut Pro 5.0 to break the DVD file into smaller modules. I can have the service create either a compressed .AVI file (DivX or Cinepak codec) or a compressed .FLV file. My video editor would prefer an AVI file as he is more familiar with that format.
Which of these files would be best to use? For the .AVI file, which codec? I am unfamiliar with what codec my equipment uses, and can't seem to find it anywhere in my documentation.

AVI is a container, just like .mov. The video inside can be any one of a number of codecs.
Final Cut Pro does not work with DivX, CinePak or FLV.
You need your file as a .mov using one of the codecs found in FCP's Easy Setup menu.
Do not use an outside facility. Hire a deck and capture in Final Cut Pro. Capturing on a different NLE and exporting a format that Final Cut Pro does not natively work with is fraught with problems and asking for trouble. It will only cost more money, more time and end in tears.

Premiere Pro CC 2014 Playback Issue / Crash Mac Pro 2011

Hi,
I've been having a big crash issue on Premiere Pro CC 2014, since the 2014.1 update.
2014.0 has been working fine this year but the update has crashed some of my biggest current projects.
Programs just starts fine, workspace responds, but anything related to playback just crashes or freezes Premiere.
My config:
Mac Pro Mid 2010
Processor : 2x2,93 6-core Xeon
Ram : 24Go 1333
2x ATI Radeon HD 5770.
I've been reading all major topics on this, this i did :
- disable Mercury Transmission
- Flushes Premiere cache
- Reinstall premiere
- Updated to Mavericks (issue happened both in 10.9 and 10.10 - thought updating drivers+opencl would help, then again no)
- Repaired permissions
- Tried with another user session
… and so on.
Nothing yet has solved my issue, anyone to help me on this major trouble ?
Thanks in advance, best regards !
Paul

Hi Paul,
Try the following:
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe folder preferences are set to read/write in all 3 locations.
Delete media cache
Remove plug-ins
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Disconnect any third party hardware
Disable App Nap
Reboot
I placed the chief culprits in bold.
Report back if anything here worked for you.
Thanks,
Kevin

New document about sequence presets and codecs missing from Premiere Pro

If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue.
This document relates to the following problems:
- missing sequence presets when creating a new sequence
- Encore error: "Encore will not launch in non-royalty bearing mode. The application needs to be serialized with a royalty bearing serial number."
- When opening a project in Premiere Pro: "Error Adobe Premiere Pro: This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
- When importing footage, the footage is missing audio or video.
These failures are all because Premiere Pro and Encore use some codecs that require activation before they can be used. If activation of these codecs has failed, these codecs will not be available to use.

Well done.

QuickTime alternative DivX codec

Greetings!
I'm dealing with an application that handles movies. The movies I'm currently working on are DivX movies with a “.avi” extension (they are not commercial movies, just some I converted from my camera).
I've installed the DivX 6 Decoder component found in Apple's Codecs page, but it shows the “DivX” logo at the bottom right corner of the movie for several seconds. My movies application, which relies on QuickTime, includes this logo in the final movie and it's, of course, not what I want.
Back in Leopard time, this DivX 6 Decoder component did not include the DivX logo, so I've tried replacing the newer (on my Lion system) by the older (in /Library/QuickTime) but now, QuickTime-related applications randomly crash (including QuickLook). This isn't unexpected, but at least I can transform my movies without this DivX logo.
Now, I'm wondering: could I find a DivX 6 Decoder component that doesn't display the DivX logo in the movie? Other components, like for MPEG or AppleIntermediateCodec, for example, don't make this.

varjak paw wrote:
You can try Perian:
http://perian.org
Remove the DivX codec first; they cannot coexist without problems. That might decode your DivX files and allow you to export them without the watermark, though I don't know if all versions of DivX are supported.
That's weird, as I already have perian (since several years). Perhaps I should never had to install “DivX Decoder” in the first place (they interfer with each other, as you point out)? Or perhaps Perian doesn't handle my specific files…
varjak paw wrote:
If not and you don't want to deal with an external converter, then paying for the Pro codec may be your only other option. This isn't uncommon with codec developers; they provide a playback-only codec for free but if you want to export or convert the format you have to pay. Check with DivX to be sure.
Ok. What I don't understand is why my converter (VisualHub) made DivX files if DivX is so “commercial” (=whose no free Codec exist which don't add watermarks). I just chose the “Avi” option, not DivX.
Thank you.

AVI and DIVX codec

I all,
In my director movie i need to put a movie galery. One of
them movie are in DivX conversion, so i need to be installed a divx
codec in my PC. Are any way to include one xtra do this codec, to
garatee that the video runs in all PCs?
Greetings.
Rodrigo

Mike,
You might want to take a look at the file closely, and then decide if you wish to edit it. Know, that if you go to DVD, or any compressed format/CODEC, after the edit, there will be another quality hit.
There are CODEC's that are basically used to play a file, and then those that play, plus allow editing. DivX and Xvid, are in the former group. There could be some editors that will edit DivX, but I do not know of them. PrPro cannot effectively use the DivX CODEC to edit. Some have gotten very lucky, once the CODEC is installed, but usually one looses either the Video, or the Audio. In the cases, where it worked, OOS issues were almost always present.
Good luck,
Hunt

DivX Codec in Compressor

Hi,
How can I use the DivX codec in Compressor. Is it possible? I bought a full version of DivX codec. I can see in only in MPEG Streamclip... maybe that's a clue something is wrong. I dont see it in Quicktime Pro...
Any help /clue ???

The list of components that Compressor can use are in a different place than the Quicktime component list that MPEG Streamclip uses.
MPEG Streamclip is far from better than Compressor, you just have to learn a bit more about the art of compression to get the results you want out of Compressor. But I'm pretty sure there is no plug-in to give you Divx from Compressor.
MPEG Streamclip is just an interface that gives Quicktime more functionality. If Quicktime were way better than Compressor, Compressor wouldn't exist…

DiVX Codec causing unsupported file.

Scenario 1- I have Divx (codec only) installed on the Windows 7 PC that i stream movies from to my TV. A lot of different files will not launch and kick out the unsupported file type when I select them for play on my TV.
Scenario 2- I do not have Divx installed and can play all of my videos on my TV.
So this prompts me to ask... What do the codecs being installed on my PC have to do with video files that are streamed over my network.
Anyone?

I've run into this in the last couple days while using the retouch tool extensively with the loupe enabled. My solution has been to quit Aperture about every 30-45 minutes.
There may be a memory problem. I have 5G of memory but also have several applications open simultaneously; PowerMail, Safari, and TextEdit. I haven't tried closing all applications while editing. I have over 54,000 photos in my Aperture library - only about 50 are referenced.
I don't usually do portrait photography but the company I work for asked me to do all the staff photos after a disappointment with the professional photographer hired. Other photos I've edited in Aperture haven't required much editing. If this is a memory issue, I guess it is something I can muddle through for this project and make sure I don't take on a lot of portrait photos until I add additional RAM again this winter.
I've just filed a bug report with Apple but don't expect I'll get a response.

Codec issue with CS6 projects, not able to load

Hello,
Recent moved to the new Mac Pro
Was editing on it and it worked.
Thought I would update and now the Codec options are limited and the previous projects wil not open.
Any suggestions?
Thanks

Hi SummersPictures,
If you're having problems with sequence presets and codecs missing from Premiere Pro, see this document for solutions for this activation issue: http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premie re-pro.html
Let us know if that works for you.
Regards,
Kevin

X64 NO MIC. Audigy 4 Codec issue? Teamspeak being us

Hello,

 Ok here it is this is what I'm running.
x64 windows xp pro
audigy 4
asus MB
A8N-SLI Deluxe 939
I use Team Speak for gaming purpose. 

 The other night as I was playing I noticed my mic stopped working. I tried numerous mics. No dice. 
I tried recording no dice. It seems like the SB just doesn?t see the mic. I did some googlein and found numerous topics about the same issue without a fix. I tracked it down to a CELP codec. I know about the mic record btn and all that. I never changed the settings. Just stopped working. 

 This has happen before but an update or a reboot fixed the issue. 

But this time is an issue. 
 The sound is terrible when using Team speak. . This has got to be a codec issue. Can somebody please help me on locating the codec?s for Team speak? From what I read this is an ongoing issue with the Audigy and Team speak..
 Not on all systems.

Thanks for your time
Russ

It is Vista. Doesn't support games that use hardware accelerated surround sound. Try to use the Alchemy software provided by Creative (for a fee for Audigy users, for free for X-Fi ones) if your games are on the ones that are supported - the ones that uses DirectX for sound.Unfortunately Half-Life2 uses a proprietary sound system and is not supported. The link is http://www.soundblaster.com/alchemy/ Warning: STUPIDLY long waiting time till all the stuff on that page is loading! The games that use OpenAL don't need Alchemy, will work fine under Vista.

Issues with Flash Pro CS5 on Mac

Hi,
I recently bought a MacBookPro 15", 2.4 GHz Intel Core i5, 4GB 1067 MHz DDR3 and CS5 Creative Suite. Built in Intel HD Graphics and NVIDIA GeForce GT 330M.
Hi have some issues with Flash Pro:
- when objects on the stage are quite big (for example a 800x3000 movie clip), it start showing strange colors and wrong position, however when double clicking the movie clip to edit it, it looks correct. Also no problem when publishing. See images attached, the first one is correct, the second one shows the problem, when editing the mc in the 2nd image i get the third image that is correct.
Correct:
Wrong:
After entering editing mode:
- after a while, when making a change in the stage or in the time line (deleting frames for example), it doesn't show it immediately, but i need to refresh the page. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
- after a while it doesn't show when selecting an object, the object looks like is not selected, however i can see that it is in the properties panel. This happens more when opening many fla in the same time. Closing and restarting Flash fixes it, for a while.
Hi have been using CS3 and CS4 with less powerful computers before (always mac) and i never encountered these issues.
Removing preferences and Application support files didn't help. I also updated Flash to v. 11.0.1, but no joy.
Does anyone know what's the problem?
Thanks a lot.
Mike

Based on some searching and testing, it seems that if you redirect ~/Library/Application Support/Adobe/Flash CS5 to a location on the local hard drive, rather than the network account storage, the problem ceases.
I hope this helps anyone else who may run into this problem.
Take care,
Branden

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

"Mouse Over" issues in Logic Pro - Mountain Lion

Hi,
Since I upgraded to Mountain Lion, I spotted an issue with Logic Pro (Logic 9).
In the Arrange window, when pointing the mouse at the end of a region, the pointer icon doesn't change to the looping (upper right corner of the region) or resize (lower right corner) icon.
As a result, those functionalities (looping and resizing regions) are gone.
Anyone having the same issue?
Is there a way to solve this or do we need to wait for a Logic Pro update to get these back?
Thanks in advance,
A nice day everyone,
Vince

Vlvl wrote:
As it's the only problem I have noticed since the upgrade, and as I mentioned in my last post, looking like a minor problem to me, I will keep Mountain Lion.
But anyway, thanks for the advice, Ivan.
Vince
No problem, as a professional musician using Logic I learned that lesson the hard way first time around. Hard as it was to not have the toys I soon learned that stability ruled the day....

QUICKTIME CODEC ISSUE

NO MATTER WHAT
i seem to do
quicktime wont play my avi.s
it says i need a codec sends me to apple divx codec i install div x and it still doesnt play but to me it seems like divx doesnt cummunicate with quicktime
in a dream world thered be a pulldown codec window in quicktime and ya tick divx e.t.c
the movies play on divx player and windows media but not quicktime
im only asking for help as im wanting to export them to my ipod eventually
any help greatly appreciated
im on windows vista and my favourite colours blue

Lee Feigon wrote:
Is there a way to check to see which codec I need, if that is indeed the problem. If it makes a difference, the movie is in HD.
Select the file in the Finder, then do "Get Info" and look at the "More Info" part of the pane. It has a section for codecs and should tell you. Otherwise, open it with the QuickTime Player app and use "Show Movie Inspector" from the Windows menu to get the codec info.
charlie

DivX Codec issue QT 7 Pro

Similar Messages

Maybe you are looking for