DJ 880c electricly dead after replacing cartridges

Sorry, two things going wrong here.
My 880c Deskjet printer started to leak ink when not in use, the well below the parked cartriges overflowed and ink came out of the bottom of the printer, these were remanufactured cartridges.
I have now replaced them correctly for other remanufactured cartridges but the printer just blinked its orange error light and refused to work, I double checked for correct installation of the ink and for paper jams, still no joy, then it just went dead, came back on for a second and died again.
I have changed the fuse for one I know works, checked all connections unpluged it and waited a few mins and tried again, yes I have tried all the tips in the user guide but nothing works.
My cartriges are `parked` and so I cannot now remove them.
Any help deeply appreciated.
Thanks.

To get faster response, allow me to suggest you repost your question in the G4 PowerBook forums here:
http://discussions.apple.com/category.jspa?categoryID=120
Choose your display size and post in that area. The forum you're now in is for the G4 minitowers.

Similar Messages

Officejet 100 lights still blink after replacing cartridges

One of my Officejet 100s start blinking the power light, and the left and right cartridge lights at the same time.
The user said she replaced both cartridges and it's still blinking. I verified that the cartridge were new, in date and genuine (and that the protective paper had been peeled away).
The ink service module looks good, too.
I can't get it to reset and it continues blinking after every power cycle.
Is this a bad unit? What other troubleshooting steps should I take?

Hello @martinio , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into printer errors. I would like to help.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following this document on Blinking Lights.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My HP Deskjet 3520 will not print in black after replacing cartridge

I have just replaced all my ink cartridges in my HP DESKJET 3520 printer (it's wireless). It prints in color fine, but not in black. I've tried cleaning the print head, aligning the cartridges, checking the breather on the cartridges. I've also just opened up another black cartridge, thinking maybe my new one was defective. So now I've just wasted a cartridge.
so frustrated! My printer is more than a year old now to. So no warranty. when I click on the printer ink levels, it's recognizing I have full cartridges - but it's not printing in black at all.
This question was solved.
View Solution.

If the troubleshooting steps in the post here do not resolve the issue the I suggest you contact HP as described in that post, even if the printer is out of warranty.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP photosmart 6520 e-AIO -- no black printing even after replacing cartridge

I recently replaced the black ink cartridge in my photosmart 6520, and now the printer is just printing blank pages, sometime with a few faint black lines...help!

Hi Jessica, I would advise calling HP Support about this....
Troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&lc=en&dlc=en&docname=c03954004
Phone no.s
http://welcome.hp.com/country/us/en/wwcontact_us.html
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Laptop dead after replacing motherboard twice

Does anyone know where I can get my Pavilion DV9925nr repaired without spending an arm and a leg. I have already paid two out-of-town vendors to replace my motherboard. The first time the repair lasted about a week. The second time it came back totally dead. When I plug in the AC adapter the colored ring around the plug lights up and the battery light on the front of the machine lights up - nothing else happens. No sounds of disks spinning, no other lights, and nothing to signify that it should be working.
I would probably be better off to throw the machine in the dumpster but I am just hard headed enough to try my best to make it work. Any suggestions? Obviously, it is out of warranty. I am curious if HP would repair it or replace it for a reasonable price.
Thanks for listening......
Paul

Thank you. I'm typing this from my just-recovered laptop. I don't know what I would've done if I wasn't able to fix it. You are a true hero heroine.
A few pointers for others with the same problem:
* Make sure you have at least .Net Framework 3.5 installed. Phoenix tools wouldn't generate the files until I installed it.
* Not every BIOS version on the HP site can be installed with this method. I had to click on "previous versions" and only the three oldest ones were able to generate the required files with Phoenix tools.

Bad Yellow Cartridge message received after replacing Cyan Cartridge

Printer tells me Cyan Cartridge needs replacement --and I replacement.
instead of OK message Printer reports that Yellow Cartridge is missing or damaged this was a full cartridge and had been working fine before. Printer --Officejet 6500A Plus
Any solutions to this problem?

Hi Vince31,
I understand you have an Officejet 6500A Plus that is telling you to replace the yellow cartridge after replacing a cyan cartridge. I'm sorry to hear this has been happening, but I will do my best to assist you in resolving this issue.
I would recommend that you follow this The Following Ink Cartridge Appears to be Missing or Damaged document as it will walk you through ensuring everything is seated properly as well as cleaning the electrical contacts on the cartridges. If you get to Step Four where it advises to replace the cartridge, I'd like you to try something a little different. Remove all 4 cartridges and pull the power cord from the rear of the printer and don't plug it back in until about 30 seconds has passed. Once you've plugged the printer back in wait for it to say the cartridges are all missing or damaged. I'd like you put the yellow cartridge in first and then close the access door. The screen should then say that just the other 3 cartridges are missing. If that is the case then simply re-insert the rest of the cartridges and wait for the printer to quiet down before trying to print. If the cartridge continues to give you an error, call HP Tech Support for your area and inquire about getting the yellow cartridge replaced (as long as it's in warranty).
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HP Officejet Pro L7580-Will not print black ink after I have replaced cartridge.

I Have an Officejet Pro L7580. It worked fine until I replaced the black ink cartridge. After replacing it I cannot print in black. I printed 1 or 2 sheets when first replaced-then it stopped (only the black will not print). After a hard reset it printed 1 or 2 sheets then stopped (printing the black). The quality test page did not print any black and there were globs of black ink on the page. The color prints fine and it show a full black cartridge. Followed multiple troubleshooting steps, to no avail.

Hi melissaccss,
I see you have replaced a cartridge and can no longer print black ink. I appreciate the troubleshooting you have done so far, but please take a look at the following document to see if you have done all that can be done; Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c01957673.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My hp 7160 wants to print in black only after replacing the yellow cartridge. Any suggestions?

My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine.
I have tried different programs to color print in, all return the same error message.

Hi @obxgirl,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

After replacing black ink cartridge on photo smart 6500 won't print black

Photosmart 6500 all in one printer won't print after replacing the black cartridge. Everything worked fine prior.

elsob wrote:
It's photosmart 6510 & I 'm from the US.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

After replacing ink cartridges, my inkjet C6215 started en endless shutdown/wakeup cycle. Help!!!?

After replacing all the cartridges in my C6215 all seemed well. I didn't use it for a few weeks (It's in a rarely used room. The next time I went in that room, the machine was trying to startup, but each time it did, it immediately shut down again, with a message saying it had been illegally shut down. I tried re-seating each of the cartridges to no avail. I finally unplugged it just to keep it from wearing itself out until I got an answer. Anyone have any idea what could be wrong?

Received a replacment 6th gen for a defective older version. Battery on new version is dead after only four moths. Was told I would have to purchase repair ($60) because 30 days had expired. I think it may be time to say goodbye to Ipod.

This is pretty sad. The battery is dead after four months (and this was a repacement product from a previously defective model). I think it is ridiculous that beacuse I am over the 90 day period by a month that I should have to pay a service fee. I understand the fee,but on a four-moth old product that is replacing an older version with the same problem?

That is a fit of bad luck right. You can still try to schedule an appointment at your local Apple Store's Genius Bar and explain to them what has happened. They may be willing to swap it out for you again at no cost, but of course, they are under no obligation to do so. The appointment is free except for your time.
B-rock

HP DeskJet Ink Advantage 1515 printer wont print after replacing black ink cartridge

Hello.
My HP DeskJet Ink Advantage 1515 printer has been working correctly since a year.
I had to replace both ink cartridges and I changed only the black one since I needed that one most.
But, the lights keep flashing and the printer wont print. Please help?

Hi @RRGS,
Welcome to the HP Forums!
I see that your HP DeskJet Ink Advantage 1515 printer will not print after replacing black ink cartridge, and your lights are still flashing. I am happy to help!
What lights are flashing on the printer?
In the meantime, please see this guide, Blinking Lights on the HP Deskjet 1510 and Deskjet Ink Advantage 1510 Printer Series.
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Black ink cartridge not working after replacing

I replaced the black ink cartridge on my HP Photosmart 6510 because the print was getting faded. Now the black will not print. I used an original HP replacement cartridge and inserted it according to specifications. I ran a test page and all colors printed except the black so I ran a printhead clean to no avail. I wet a paper towel and touched it to the ink and it is not dried up. Help!

It is definitely a hardware problem then. Try the steps in the document below. If that doesn't work, you will need to contact tech support. If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
Black Ink is Missing on Printouts
HP Technical Support Case Call Form

Photosmart C6180 All-in-One: Replace cartridge message after already having replaced cartridge

Would appreciate ideas on how to resolve this issue with Photosmart C6180 All-in-one Printer.
Receiving "Cannot Print, Replace the following empty ink cartridge(s) to resume printing."
Replaced cartridge with newly purchased cartridge (so not expired) and still receiving same message.
Thoughts?

All cartridges (from original to replaced ) were HP ink cartridges.
No refills.
No non-HP ink.
All are now within expiration.
Issue appeared when yellow cartridge ran out of ink.
Printed black .
Went to store ( STAPLES ) and purchased 02 yellow XL plus 02 combo pack .
Replaced yellow with 02 yellow XL.
It did not recognize new replacement cartridge.
Replaced yellow with 02 yellow from combo.
Again did not recognize second new replacement cartridge.
Per HP, replaced 'expired" cartridges (not yellow).
No change.
Did Power on Reset / reseat all cartridges OR reset voodoo.
Iink levels still 0 but able to print self test in color and photo.
Turned off PC and printer for 2 days.
Now back to three cartridges at ink level 0 and 2 need to bne replaced.
Only prints black.
I tried Power on Reset and repalce cartridges, but same result : Black only : replace empty ink cartridges.
TY

PB 1400 dead after PRAM replacement

Hey all,
My PB 1400 is unresponsive. After replacing an old PRAM battery, it won't power up, won't boot, won't anything. The little green power indicator on the display comes on, and stays on. It will only go off when I press and hold the reset button; and when I let go, the light comes back on. Other than that - nothing happens.
It doesn't matter how often, or how long, I press the power button or the reset button, the powerbook does nothing. No startup chime, no nothing...little green light, and that's all.
The powerbook worked fine before the PRAM replacement. It's not likely that the PRAM battery itself is the problem, since I replaced it a second time, with the same result.
Someone please help?

Did you get the GLOD worked out?
I wrote the website pbreadme.com, and I found something on there that may help you. Although it is on the pb 2400c page, it might work for the 1400.
Here is a snippet from the page:
To solve the GLOD or problem:
1. GREEN LIGHT (constantly lit)
a) Disconnect the AC adapter
b) Pull Lion battery out
c) Reconnect AC
d) Reset Power Manager button by depressing it for at least 40 seconds
-battery out with AC connected results in resetting Power Manager.
2. NO LIGHT (hitting Power key results in faint click)
a) Disconnect AC adapter
b) Pull Lion battery out
c) Reset Power Manager button by depressing it for at least 40 seconds. This should work: if this doesn't work, reconnect AC adapter and repeat PM reset, always with battery out.
Reference: http://www.pbreadme.com/PB2400C.html

DJ 880c electricly dead after replacing cartridges

Similar Messages

Maybe you are looking for