Djvu viewer

I have an iMac G5 computer with a 2Ghz intel duo
processor. I have downloaded the Djvu image viewer/plug in for use with a family history search site. I downloaded and installed sucessfully.
When I view on the trial image at the end of the download and installation of Djvu I can see a good image. However, after conducting a sucessful search via Family relatives web site and attempting to view the image of a census record I get an error.
The search was for a date of birth for my father. The result was
Ceaser Harry, Mothers maiden name; Steer, district Rotherham.9c, page
no 1534. When I clicked on the magnifier to "view image" I ended with
the following error;
"The page ?Family History . Genealogy . Ancestor . Ancestry . Family
Tree . Family Relatives? has content of MIME type ?image/x-djvu?.
Because you don?t have a plug-in installed for this MIME type, this
content can?t be displayed".
My system tells me that Djvu was installed correctly. Can you please
help?
Thanks
Jim Ceaser
(Hopefully I have the correct place for my question)

Thanks for answer. As far as I discovered apvlv remembers the last position in pdf and djvu files but opens it only in pdf files correctly. At least it happens with my djvu files.

Similar Messages

  • Pdf and djvu viewer with bookmark support.

    Hello everyone.
    Can someone advise me pdf and djvu viewer with a bookmarks support?
    I was using evince before but some time ago a bookmark support
    ceased to work for me.
    I mean a bookmark support with ability to open saved documents
    after restarting of viewer.

    Thanks for answer. As far as I discovered apvlv remembers the last position in pdf and djvu files but opens it only in pdf files correctly. At least it happens with my djvu files.

  • Ancestry have told me they do not support Firefox 4. There is an issue with their magnifier when viewing documents. Findmypast DjVu viewer is also difficult.

    When the magnifier in Ancestry's document viewer is used (for example to view one small part of a Census image at a larger magnification), it is impossible to remove the cursor from the image without CTRL-ALT-DEL, which releases it instantly.
    Findmypast cannot move from one image to the next without crashing.
    They have both suggested I use IE7 or 8, or return to Firefox 3.6
    Would it be better to return to version 3.6 while major sites become compliant? Should point out that Ancestry doesn't support IE8 yet, either, doesn't seem interested in keeping up. Is there anything Mozilla can do?

    As it is just for one site, you can install the portable version of Firefox 3.6 on your hard drive and use that to access Ancestry, and use Firefox 4 for the rest of your browsing.
    You can download the portable version from http://portableapps.com/apps/internet/firefox_portable - Firefox 3.6 is listed in the legacy versions section near the bottom of the page. When you run the installer just specify a location on your hard drive.

  • Lightweight chm and djvu (and pdf) viewer?

    On windows I have used SumatraPDF, a very fast and lightweight app that can read pdf, djvu, and chm, among others.
    On arch I'm using epdfview for PDFs, but is there anything light and fast for chm and djvu?  and of course, better one app to handle them all.
    Last edited by archadmirer (2012-01-13 09:02:06)

    /dev/zero wrote:Have you seen this list?
    what does 'common' have in common with light and/or fast?
    I did look here, and didn't find anything for chm or djvu.
    tomk wrote:Did you look in the repos and AUR?
    Of course, and I know I can do some guesswork based on the dependencies etc, to pick a light/fast one.  but the forums are all about sharing experience, right?
    OK, for chm I have settled on xchm.  it opens instantly large files and is very good all around.   one problem, it frequently drops the spaces between word, suchasthis.    is there a fix?  are the others (gnochm, chmsee, etc) better?
    thanks.

  • Air browser: djvu plugin doesn't work

    Hello,
    I am building a custom air browser for my company using the HTML component.
    It's working great in general but my company makes extensive use of the djvu technology for online image viewing.
    Problem: the djvu plugin doesn't work on the air browser. After installing the last version (6.1.4) of the plugin it keeps saying it's necessary to install the plugin. (it works ok with the other browsers, also with google chrome).
    Has anybody ever met a similar problem?
    thanks in advance
    marco

    Hi Marco,
    unless something changed between versions documented limitations include:
    - support for only PDF plugin (version 8.1 or later) - with api to check availability at runtime if it is available on machine
    - support for Flash plugin (without external dependency)
    So other plugins are not supported:
    http://livedocs.adobe.com/flex/3/html/help.html?content=AboutHTMLEnvironment_2.html
    regards,
    Peter

  • Djvu conversion

    Does anyone know a good way to convert a djvu file to some more standard format like a pdf? I have MacDjView which lets me view the file on my computer, but the print option is greyed out so I can't save it as a pdf that way. Thanks!

    Statements makes no logical sense.
    Pictures taken with the iPhone are in jpg format.

  • Where is the DjVu Plug in?

    I've been using the DjVu plugin for years, without issue. It worked fine yesterday.
    As of this morning, it has vanished from Firefox.
    Multiple downloads, installs, uninstalls, restarts and reboots later, and I still have no DjVu in Firefox 21.
    It works in IE 10, so it is installed on my Windows 7 64bit system. I don't want to use IE 10 to view the old newspapers that are a primary part of my research. The only way to view them is with DjVu.
    Why - what is wrong - where is it? Can't even find the plugin to add from the add-ons page.
    Please - someone point me to a fix.

    Did you check your Plugins list to see whether it is at the bottom in the disabled plugins section?
    orange Firefox button (or Tools menu) > Add-ons > Plugins category
    If it is disabled, can it be re-enabled or does it seem to be blocked?
    If it's not there at all, it's possible that Firefox's plugin database file has become corrupted. You could try renaming that file and having Firefox regenerate it. The steps for that would be:
    (1) Open your current Firefox settings (AKA Firefox profile) folder using
    Help > Troubleshooting Information > "Show Folder" button
    (2) Switch back to Firefox and Exit
    (3) Pause while Firefox finishes its cleanup, then rename '''pluginreg.dat''' to something like pluginreg.old
    (4) Restart Firefox. Assuming the DjVu plugin is listed in the registry or located in a Firefox-relevant folder, Firefox should find it.
    Any luck?
    If the result of the above operation is that Firefox cannot find most of your old plugins, you may have disabled plugin scanning. To check that:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''scan''' and pause while the list is filtered
    (3) If '''plugin.scan.plid.all''' is set to false, double-click it (or right-click > Reset) to switch it to its default value of true. I think you'll have to restart Firefox again to trigger the scan.
    Hopefully, that covers all the possibilities...

  • Image/x-djvu missing plugin?

    1837online.com is a well known and much visited site (for genealogists). They tell me that I can't view their popups because Safari lacks an essential plugin. Has anyone else had a similar problem? The specific error message reads -
    The page “1837online.com” has content of MIME type “image/x-djvu”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed.
    david

    Thank you Tom - works like a charm - david
    1837online.com is a well known and much visited site
    (for genealogists). They tell me that I can't view
    their popups because Safari lacks an essential
    plugin. Has anyone else had a similar problem? The
    specific error message reads -
    The page “1837online.com” has content of MIME type
    “image/x-djvu”. Because you don’t have a plug-in
    installed for this MIME type, this content can’t be
    displayed.
    david

  • Safari and Djvu plugin

    Hi, all. I recently installed the djvu plugin for my emac (safari v1.0.3 and 10.2.8), and I cannot view any djvu files. The plugin (v6.0) is shown to be present in the installed plugins, but when I go to the open file menu, all of the djvu files are ghosted and cannot be selected. Any ideas how to help here? Thanks!

    I was able to load and view some of the samples at http://www.djvuzone.org/demos/index.html using the plugin (I only tried a couple). But when I saved the files to the desktop they didn't show up on the desktop and were greyed out in File > Open File...
    I restarted the computer and the files became visible on the desktop. Double-clicking the files opened them using the DjVu Plugin Host, located in the DjVu folder in Applications. You can also use the Plugin Host to view the examples in the DjVu folder.
    However, I don't know what the story is with 10.2. DjVu is somewhat of a mystery since not too many people seem to use it and info/expertise seems to be scarce. This is about the second post about DjVu that I've seen here in a couple of years.
    Hope this helps some.
    Cheers,
    K.S.

  • Can not refresh view data in STRUST

    I am using the JSP (STRUTS) for developing my App.
    I get a list of contact. In bellow it, I make a link for each contacts.
    When i view details of one contact. On click link below.
    My pages:
    listcontact.jsp
    contactdetails.jsp
    When i request a details of contact from list contact -> View successfull.
    But when i refresh the contactdetails.jsp page. I got a message error:
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
    I have to use:
    response.setHeader("Cache-Control","no-store");
    response.setHeader("Pragma","no-cache");
    But can't refresh any way this page.
    Plase show me the way to solve it.
    Thanks
    Vu Nguyen

    hi,
    Here are codes
    listdata = new CompanyListData();
    companyList = (ArrayList) session.getAttribute("datalist_company");
    if (companyList == null)
    companyList = (ArrayList) listdata.getCompanyList(datasource);
    session.setAttribute("total", companyList.size()+ " companies");
    session.setAttribute("datalist_company", companyList);
    return (mapping.findForward("success"));
    And for details:
    if ((addressItem==null && companyName!=null)||(addressItem==null&& companyId!="0"))
    addressData = new AddressDetailData();
    addressItem = addressData.getAddressItem(datasource, companyId);
    session.setAttribute("addressDetail", addressItem);
    I got companyID by:
    String companyId = request.getParameter("companyId");
    return (mapping.findForward("success"));
    Please gest the problems that.
    Thanks,

  • Year-at-a-glance View in iCal

    Once again, I am filling out next year's year-at-a-glance wall calendar and wish I had this view in iCal. With today's screens, a year-at-a-glance view shouldn't be difficult to implement and would be very useful. My favorite layout has 12 rows (one for each month, January at the top) and blocks for each day running from left to right with weekends shaded. When is Apple going to improve iCal? or at least enable others to make such improvements?
    Message was edited by: Jim Putnam

    I can't believe this, I finally get round to organizing myself and ical doesn't do a year view.
    I have hunted online for some way to make this happen and have ended up making a pdf of a printout to be able to see it.
    This can only be a temp solution, as my diary changes a lot and printing/pdf is not very elegant or efficient or even that easy to read quickly.
    In my online search I have found posts requesting this as far back as 2003, and 6 years is to long to wait for something that surely must be such a simple solution.
    I'm also stunned by the lack of plugin/widget/app solutions from 3rd party developers, I would definitely pay a a buck or 2 for something to let me do this well within ical,
    And If I want it you can be sure there are at least another 100,000 who would also pay, maybe we could get the guy who wrote the ifart app for iphone to write it for us, about 2000 people a day were buying that at 99 cents a pop in the run up to christmas.
    Apple should embarrassed by this.
    If anyone knows the solution please post it.
    Brin

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • Mini-DVI to Video Adapter: For TV Viewing?

    The Apple-Salesperson sold me a Mini-DVI to Video Adapater to send pictures to the TV from my MacBook. I get sound on the TV but not the slids. The TV picture only displays the computer's main screen.
    Is this the correct adapter? I see other threads here use something different. Is there a special setting I need to change?
    Thanks,

    With your TV hooked up to your Macbook, you should be able to view anything on your computer. If you have all of your pictures in iPhoto, your best option is to use FrontRow by using the remote.
    (make sure your displays are mirroring eachother, Preferences>Displays)

  • Refreshing the Data from a embed view in a view container

    Hi everybody
    I would like to know how can I do to refresh all data from a View with a view container the problem is:
    that I have a window that has a view at the same time this has a view container.  The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
    The question is:
    How do I force the view to refresh all the data or call again the wdDoInit() method?
    Thank you for your help

    Aida,
    Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
    1) Goto the Interface Controller of C1 and create a method there lets say doSomething
    2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
    3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
    4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
    wdThis.wdGetC1CompInterface().doSomething();
    Chintan

  • How to load a specific view in a browser

    Hi Guys,
          In my application, I hav 3 views..I need to set particular view at window level..So How can I do that..Thanks in advance

    Good day,
    Please check my reply in the following thread.
    Re: Change of default view in a web dynpro window
    Regards and Best wishes.

Maybe you are looking for