DKA790GX Platinum and Phenom 2 1100T

Hello,
Currently i am running DKA790GX Platinum with BIOS 1.G0 and AMD Phenom 2 X4 965 Deneb C3.
I am going to upgrade my CPU to Phenom 2 X6 1100T Thuban.
The problem is that X6 1100T is not on the list of supported processor by that Board. http://www.msi.com/index.php?func=prodcpu2&prod_no=1552&maincat_no=1
Maximum Supported CPU only 1090T, according to that list.
My question is :
I am in needs to upgrade to more powerful CPU.
(Considering that, X6 1035T - X6 1090T are supported)
will 1100T be working on my Board?
Thanks
 

When will MSI update the BIOS to support 1100T?
All six cores Thuban are already supported except 1100T.
I think it is not that difficult for MS to edit BIOS and add support for 1100T.
C'mon, i am your loyal customer. Pleaaseee...
Thx

Similar Messages

  • DKA790GX Platinum and Gigabyte ATI Radeon 4870X2 2GB

    Hi all, was wondering if anyone has had issues with this Gigabyte card in the DKA790GX Platinum. About to purchase but thought I would check here first.
    Thank you in advace.
    Mark
    -MB DKA790GX Platinum
    -Bios version 1.6
    -Cpu - AMD Phenom2 940
    -RAM - Kingstons 2x2G-UDIMM 1066mhz
    -Video - Gigabyte ATI Radeon 4870X2 2GB
    -Power - Antec Signature 650 +5V 0A 24.0A ±3％ 50 50
    +12V1 0A 22.0A ±3％ 120 120
    +12V2 0A 22.0A ±3％ 120 120
    +12V3 0A 25.0A ±3％ 120 120
    -12V 0A 0.5A ±7％ 120 120
    +5VSB 0A 3.0A ±3％ 50 50
    +3.3V 0A 24.0A ±3％ 50 50
    +3.3V, +5V max. load: 140W +12V1, 12V2, 12V3 max. load: 43A
    +5V, +12V1, +12V2, +12V3 & +3.3V
    -Hard Drives: Western Digital 320gb SATA Raid 0
    -Windows XP Pro 64bit SP2.

    I have a gigabyte hd 4870x2 in my dka790gx platinum and it works, just having other problems with getting the board to work with 4gb or more

  • MSI DKA790GX Platinum and AM3 CPU - BIOS Update

    Hi,
    I am going to upgrade my current computer from an older AMD socket 939 setup to an AMD Phenom II based system
    I am thinking of the MSI DKA790GX Platinum motherboard and AMD Phenom II X3 720 (Black edition) CPU (AM2+ Motherboard and AM3 CPU), but I need to clear up the BIOS update for AM3 issue before buying the components.
    The motherboard advertisement states that the BIOS has to be upgraded to support AM3 CPU
    My issue is this: I do not have an AM2/AM2+ CPU, and I am looking to jump right into buying an AM3 CPU - so will the unit power-up/POST with the combination of the newer AM3 CPU and older BIOS to allow me to update the BIOS using either FDD or Bootable USB Pen in a DOS environment?
    Does anyone have any knowledge or experience of this? Any help on this would be appreciated
    Thanks

    Quote from: Scottike on 12-April-09, 00:18:13
         The 1.74 Bios is one I got from MSI tech support.  We're trying to work through a problem with my new board. nothing major, but we're not quite there yet.
    I know that Nvidia was The chipset to have for several years, but I think AMD has upset that applecart a bit with the 780 & now 790 chipsets, and with Intel
    getting into the chipset game as well, Nvidia could see some rough times ahead.  They may even end up dropping out of the chipset game, since Intel's new CPUs have the memory controller built on die.  Hence, Intel has no real need for NVidia any more, Nvidia may end up just focusing on the video card market, unless?
         My board defaults to 800mhz as well and I'm running a 720. You have to keep in mind that they have to make the boards default to the lowest common denominator as not everyone runs 1066 capable memory on their board (even though Manufacturers may spec the memory so). I also have to manually bump up the voltage, as well as timings and ratio for 1066.  But, my Mushkin ram plugged in and booted with no problems, but I did have to bump up the voltage and tighten up the timings even at 800.
    Interesting (Abut BIOS version 1.74). I guess it is not yet available for downloads.
    So now Intel CPU's have the memory controller on the die (just like AMD). So does this prove as an advantageous concept? I expect Intel to implement better memory management than AMD. AMD drops speed when all 4 memory banks are occupied... what is the use of utilizing max RAM capability if memory controller cannot sustain the max RAM speed?
    I may agree with you on the concept that motherboard should support the lowest (RAM) denominator...
    However if someone uses lower than 1066 MHz sticks, system should detect accordingly, and when 1066 sticks are used, auto-detect as 1066... I still do not see the issue here. On former nVidia based boards like my MSI K9A Platinum SLI (with an AMD X2 CPU), 800 MHz modules are detected as 800 on auto, no need to manually tweak anything in BIOS. I still have to see an nVidia EPP profile enabled board which is claimed to auto detect 1066 MHz capable memory sticks by default.
    On my system it is also the same... I have to up the RAM voltage to 2.2V (otherwise system is not stable), as well as setting up the timings and of course the RAM/FSB speed ratio to 1:2.66.
    I am running currently 4 chips of OCZ platinum 2 GHZ (for a total of 8 GB RAM, for 64 bit Vista and Linux). Also with mine (as we know Phenom II does not support 4 sticks of 1066 MHz) it drops to 800 MHz. As well as, I needed to bump the voltage to 2.2 V... otherwise in the middle of operation, system reboots. We know what this is about, dont we ?

  • DKA790GX Platinum and memory issues

    I've had my dka790gx platinum now for approximately 2 weeks.
    Build is as follows
    DKA790GX-Plat - bios v1.6
    AMD Phenom II X4 940
    2 x 2gb Corsair Dominator 1066 (5-5-5-15 @ 2.1)
    Gigabyte HD 4870x2
    Creative X-Fi Extreme GF-PS
    Tagan 900BZ
    It has been working fine but all off a sudden I started getting the dreaded BSOD in vista 'apc_index_mismatch' and 'memory_management' - I've ran memtest and on the first test @ 45% the system reboots with 4gb of memory in. This happens whether it is running @ 800mhz or 1066mhz, I've also tried 4 x 1gb of corsair xms2 ddr 800mhz and get actually the same issue. If I run 2gb of memory then all tests are ran without any problems and again this is for both the dominator memory running @ 800 and 1066mhz, and also the xms2 memory.
    I've then ran another test using the 2 x 1gb xms2 + 2 x 512mb xms2 (all ddr2 800) to give total of 3gb and ensuring all 4 memory slots are populated, and again all tests run fine.
    I've tried the memory in ganged mode and unganged mode, but it doesn't make a difference, once i go over 3gb I have the problem, so is this a motherboard fault (i've opened support ticket but had to miss some info as it meant fully stripping down the pc to get hold of the sticker on the side of the pci slot) or a cpu fault seeing the memory controllers are on the cpu?

    Quote from: BuD_Sp3NcER on 06-March-09, 03:35:29
    As far as overheating is concerned, it really shouldn't be a problem. Before getting a cooler for my RAM, it would get too hot to touch during full load, but would never run into any sort of problem. If you don't believe me have a look at what a SUPER*TALENT Stick looks like: http://www.pcstats.com/articleimages/200702/supertalentT1000UX2G4_full.jpg - Compare that to the dominator, The SuperTalent has to be just about the ugliest MEM-SINK you could ever lay eyes on  EXCELLENT RAM though 
    Kind of a really silly question here: when testing below 4gb, you are testing both sticks, right? I mean they look identical, a small distraction & you're putting the same one back in...happened to me...
    yep memory was tested as single chips, also as stated previously testing 4 x 1gb of other memory caused memtest to fail, but 4 x 512mb passed, so did 2 x 1gb + 2 x 512mb
    memtest fails all the time when have 4gb of memory in this mother in any combination, but using pc-check all memory passes, if my works had a ddr-2 memory checker then I would have also teste the memory in that as that will pick out memory faults better than any software
    Also when the dominator is in slot 1 there is about 1cm between heatsink and dominator fins at the most, so this be a possible cause of the memory getting too hot especially as I would leave the machine on 24/7, but as I've re-setup another machine to do the stuff this machine was doing then i'm hoping i don't see the problem..

  • K9N2 SLI Platinum and Phenom II 940

    I have a K9N2 SLI Platinum and have a Phenom 940 on the way. Are there still issues with bios 3.4? what is the proper way to flash to 3.4 so the volatge is normal ? I just flashed via the usb meathod but dont i have to reset and clear cmos? also what is the stock proper voltage for the phenom 940? is it 1.375 or 1.350?
    K9N2 SLI
    Phenom 9750
    8GB OZC SLI 6400
    XFX 9800GT SLI
    OCZ 550W

    Quote from: digitabc123 on 08-April-09, 06:59:12
    have you tried uping the voltage, the black dragon works perfect at 1066 from 2.2v to 2.4v, however the gskill requires 2.3v to work perfect at 1066 (so my setup its 2x1gb geil and 2x1gb gskill (total 4gb) voltage set to 2.3v) if i dont set 2.3v i get completely random restarts (could be after afew hours or afew days), all passed with prime and occt.
    just in case, after bios reset ddr is set to 800 as default ,go into bios and set divider to 1066, then set timings to 5-5-5-15 (dont use auto/sli ready) bios sets strange timings by default at 1066 then set voltage and save.
    I've tried everything and even chatted with MSI Techs over it all, been back and forth between MSI and OCZ for about a month now.. bottom line, MSI told me was that they don't certify or support OCZ ddr1066 on the K9N2 SLI Plat; which OCZ Techs told me, basically. B.S!  ...claiming they tested the Board themselves when it came out.   However OCZ doesn't even have the Board listed on their RAM Configurator on their website; which they claim is MSI's fault... and so on, and so on...
    Anyway, OCZ is offering to swap my Reaper Set for a different Model set which they claim is more reliable on AMD processors.  Probably their Gold or SLI model set I'd guess; they don't even advertise on their website any difference in their sticks being "Intel Certified" or "AMD Certified" ... and so on.
    Worse case scenario; if in the end whatever they give me still doesn't work, I'll EBAY it and try a set of those geIL Black Dragons.

  • DKA790GX Platinum SOLVED (backward FP connector and IGP driver issues)

    Hi all. I just got my DKA790GX Platinum along with the rest of my new PC parts yesterday and got it all up and running last night with Vista Ultimate x64. So far everything runs smooth as silk except for a couple small hiccups...
    1: The power LED doesn't light up. My front panel wires only have a 3 pin connector, so I'm using the 3 pin spot on JFP2 with the arrow on the connector on the + pin. SOLVED: Connector from the front panel was wired backward. Put the arrow to - and it worked perfectly!
    2: the HD3300 onboard video seems limited  to 1440x900 pixels resolution. My monitor supports 1680x1050, which I was running on my old computer with a radeon x1650xt. Since most of the reviews I'd read placed the HD3300 between the HD2xxx and HD3xxx series for performance, I figured it'd be a better card than the x16xx series. In this respect I guess not unless anyone has a way to enable higher resolutions on it.  SOLVED: Installed the latest catalyst drivers from ATI for the HD3400 series and in the advanced control center under Monitor Properties 0 -> Attributes unchecked Use Extended Display Identification Data (EDID) or driver defaults then manually set my maximum resolution and refresh rate to those of my monitor. After this in the advanced control center under Display Options I was able to set my desktop area and refresh rate to the correct numbers.
    3: Initially I was getting awful frame tearing or interlacing of some sort on video playback, including both DVDs and video files like AVI. This I was able to resolve by disabling Aero but I'd think there should be a better solution for such low intensity usage. I never had this problem on the x1650xt in XP. SOLVED: Installed the latest catalyst drivers from ATI for the HD3400 series and in the advanced control center under Monitor Properties 0 -> Attributes unchecked Use Extended Display Identification Data (EDID) or driver defaults then manually set my maximum resolution and refresh rate to those of my monitor. After this in the advanced control center under Display Options I was able to set my desktop area and refresh rate to the correct numbers.
    Any ideas for any of these problems would be much appreciated!
    Current system specs:
    Mainboard: DKA790GX Platinum
    CPU: Phenom 9950 Back box
    RAM: 4GB OCZ 1066
    Sound: Auzentech X-Meridian 7.1
    HDD: Samsung 1TB SATA2
    Chassis: Thermaltake Armor+MX
    PSU: Antec 430w (will be replaced with a higher wattage supply when I have the money but works for now)
    Monitor: Samsung 225BW (22" widescreen)
    I'm using all the latest drivers from the MSI web site for the motherboard, and from the manufacturer websites for sound and monitor.

    Yes, I downloaded the latest Samsung 225BW drivers from their web site though I find it questionable as to whether they're functioning properly or not; Adobe Photoshop CS3 gives an error on startup saying the monitor's color profile is corrupt. My guess is the drivers aren't fully compatable with Vista x64.
    Meanwhile I got my replies from MSI, both from the customer service form which I filled out first, and the technical support form which I'd found shortly after submitting the first ticket. I've never gotten two such vastly different yet both so woefully inadequite answers from a company in my life
    Tech Support's answer:
    Quote from: MSI Tech. 11/06/2008
    There is no problem with the on board HD3300 VGA which can support the full 1080P resolution which be sure to have the latest mb bios and a fresh/clean OS installation and follow by updated system and device drivers installation which there is no problem to support the 1680x1050 when the monitor can support it: http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1552 ** http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1552
    Customer Service's answer
    Quote
    Dear customer,
    The onboard VGA performance is lower than external VGA. It is normal.
    Best regards
    MSI technical support team
    Tech support while correct didn't tell me anything I didn't already know, and the broken english is difficult to read. The customer service answer is ridiculously false, I have to wonder if this employee ever bothered to look up the answer (yes an IGP is typically less powerful than a discreet video card but the goals I was after were well within the card's capabilities. The fact that I was able to resolve the issues proves that). I hold MSI hardware in very high esteem. I've never had a problem with an MSI product that wasn't caused by another part failing (my K9N-Neo F in my previous computer popped a cap in the northbridge when the PSU blew out, and my wife had an MSI board literally melt a few years back in a power surge, neither was MSI's fault) but my estimation of their customer support has dropped a few notches today.
    To sum this entire experience up though; this is simply one of the newer MSI boards on the market and it hasn't had a long time for drivers to be perfected. The ATI drivers work slightly better for now. As for how I figured it out, I read a review on the board somewhere (maybe newegg since that's where I bought it) that mentioned the catalyst drivers from ATI have had the HD3300 in them for a few months now even though it's not linked directly on their site yet. I figured the HD3400 would be worth a try. :D
    In an unrelated topic, I've got a new problem though I'm not sure if it's related to the board at all. For some reason Portal stutters awfully in full screen mode even with details turned way down. It runs fine in windowed mode. On googling it I found several other people on the net have had the same problem but no answers have been put forward that I've seen. As far as I can tell it's a DX9 emulation error in Vista x64 but no way to prove it and no ideas for a solution. Then again the IGP could simply be insufficient to power that game despite being nearly twice as fast as the x1650XT I'd been using in my previous machine....

  • Difference between DKA790GX and DKA790GX Platinum

    I'm trying find the difference between the
     DKA790GX  and DKA790GX Platinum.
    From what i can tell in the spec the only diff is the firewire port and about £20.
    anyone else know ?
    rgds

    And....the Platinum version is black!!!  That alone would be worth the extra $20 bucks to me.  It's gotta look good when you open the case.

  • K9N2 SLI Platinum - new Phenom support and OC

    ____________E D I T ___________________
    MSI K9N2 SLI PLATINUM
    SUPPORTS
    AMD PHENOM X2 965 BE CPU
    ____________E D I T ___________________
    if it didn't I would be crying in a corner somewhere not posting this from my super fast PC 
    Thanks to all you guys
    ____________E D I T ___________________
    Hi guys,
    Had my lovely new  M/B for a few months now and It has been a wonderful board. 
    despite one hiccup where the PCIE bus had a moment / died ( flashing the BIOS to latest fixed it )
    My setup currently :
    Jeantech Storm 700w Modular PSU
    MSI K9N2 SLI Platinum
    AMD Phenom 9550
    with Zalman silent fan 
    4GB crap ass RAM  (that's a real brand .. honest)
    2 x BFG 9800GTX+OC in SLI    I likes these .. they make lovely noises in my dark room  .. VrrrrUmmmmmmm mmm mmmm mmm
    500 GB slow ass HDD  (Again the marketing dept of this brand were out to lunch when they launched it)
    Windows 7 RC. latest build
    Nvidia Det's  190.xxx  latest driver
    mostly playing Fallout 3  (graphics are beautiful but notice the CPU is lagging behind now)
    So to the Crux of my issues :-
    I'm looking to upgrade a few things here though, 
    as you can see a few components are severely bottlenecking performance.
    First off the RAM.
    going to get some nice Kingston 1066 DDR2 (4GB or should I go for 8GB ?)
    next .. a WD VelociRaptor 10k rpm HDD  probably just a small 74GB or the 150GB drive
    and finally the pies de resistance  ( yes PIES ! .. I like PIES !!)   shiny new AMD Phenom 965 CPU
    SO...   Will the 965 phenom work in this board ?   I've logged on tech support but no answer, 
     latest BIOS is installed already 7374v35 i think.
    I know it's a 140W CPU so okay there, 
    the Socket AM2+/AM3 is good
    .. I just NEED to be sure before spending £200.00
    if not .. is it worth getting the 945 or 955 BE and clocking them ... could the board handle clocking the 965  ??
    and last of all,  if any one has any opinions on the build .. let me know...   have you built a similar rig ?
    cheers all
    PIES out ~!
    OCD

    WoW !!
      Thanks for the replies guys,  I really appreciate it...
    and after a drunken bout of spontaneous cash wastage on the internet last night  :
    1) AMDOA06KNF PHENOM II X4 965          £151.07   
    2) WDGA060T2  WD VELOCI RAPT 150GB   £99.07
    3) KTEA069M4  4GB 1066MHZ DDR2          £41.70
     ... goods on the way... 
    So I guess in a few days I'll be able to update you all on the build and will more than likely be updating this post with my random moronic questions and queries when the next thing goes wrong   
    looking into Power requirements
    9800GTX+ SLI requires a min 550w PSU .. and so far in top gaming and 3D benchs hasn't gone over 250w on the meter ( pretty good I think)
    the Zalman CNPS9700 LED  seems to keep everything cool without any power to the fan... but I leave power on low just for the pretty blue lights   
    I'm happy to listen to any advice though,
    One thing I will need is any pointers you can give on the K9N2  built in OC facility in the BIOS .. is it any good .. can I TRUST it to not fry my CPU by running it on auto ?   is there any recommended settings ?  etc.   your thoughts and experiences welcomed
    OCD

  • Problems after BIOS update on DKA790GX Platinum

    Hi,
    I have set up a pc with the DKA790GX Platinum (MS7550). The config:
    - Phenom 8750
    - Silverstone 400W PSU (fanless)
    - 2x2GB Crucial PC5300
    - Pioneer Blu-ray
    - Seagate Momentus 5400.4
    (this is a HTPC setup...)
    The pc started up fine and I installed the OS. I had the board connected to my monitor through HDMI.
    After updating the BIOS the board went all black on me. I tried connecting a floppy-drive to recover to a older BIOS-version, but could get the board to do that. I then tried different monitor-connections, but nothing.
    I then installed a Gigabyte Radeon HD 4870 1GB-board I had laying here, and board seems to boot somehow - all graphics are messed so I can't read whats on the screen, but at least I get some kind of image. A little unsure on how the PSU handle that videoboard.
    Anyone know if the 1.2 BIOS-update maybe is set to <swearing removed> the integrated video by looking for a videoboard in the system? Have a Asus 9800GT Matrix-board in a another pc here - maybe I remove that and try it in the new pc, but... argh..
    This ain't funny at all anymore. I had a P45 Platinum dying during a BIOS upgrade. I had a P45 Diamond that dosn't want to boot anymore, and now this... MSI-motherboards really don't want to be friends with me at the time  :-|

    Hi have exactly teh same problem,
    On Dec/2008 I have set up a PC with DKA790GX Platinum (MS7550 ver 1.2), Phenom 9750, 1 120GB hd, 4 MB corsair xms2 ddr2 800mhz, psu 500w. I installed the win xp pro OS. I had the board connected to my monitor vga. After updating the BIOS (with live update utility) the board went all black on me (the fan, PSU, hd starts normal). I test the PSU, HD and the memory, but the problem still continue.
    Two days after, the PC start normal, but I don't know what was the problem.
    Aleatory when try to start the PC, sometimes I get exactly the same problem, but, Yesterday, I try again to work with me PC and now i have the same problem.
    What can i do to fix this problem?

  • DKA790GX platinum problems

    hi there, please bear with me as i am pretty new to building computers, i recently bought and installed a 25.g phenom, and a dka790gx platinum board.
    i also have a radeon 3850 hd card installed. since doing this, formatting my hard drive and using a clean install of windows vista i have been plagued with programs crashing, one or two blue screens and other such instability. i only have 3 1 gig ram sticks installed, do i need to use pairs? i ran the windows memory checker as i play world of warcraft and when that crashes it said memory could not be wriiten, or read, on two diff occasions.
    i would really appreciate some help on this. firefox seems to be a program that has a lot of problems, as does windows live messenger and yahoo messenger, these problems do see intermittent though.
    regards, and hoping for help.

    What works good on one board doesn't always work on another.
        Take a look at the other user signatures on this and other forums and look for users with the same motherboard, see what memory they're using.
        Don't mix and match memory, pick a brand and part number and stick with it. If you change brands, or part numbers within a brand, change ALL
    of your memory to that brand/ part number.
        If your running dual channel, buy matched pairs,  They're matched at the factory to work together, and will have closer to identical specs than two sticks
    you buy separately.
        Check your memory manufacturer's website for compatibility with your motherboard (OCZ doesn't list your motherboard on their site, but it's a new board , so it might be worth a call).
        Search for reviews of your motherboard or the memory your thinking about purchasing and see if any of the sites have used your motherboard and/or memory for a review.
    If it's a popular motherboard, odds are somebody will be using it as a test bed,  If your lucky, they used or reviewed the memory your interested in, on your board.
        Hang out here for a bit and see if anyone is using or tried your motherboard/memory combination.
       

  • Cpu cooler with DKA790GX Platinum

    Hello, planing on buying DKA790GX Platinum with a Phenom II X4 940 Black Edition, my question is about what cpu cooler fits the best on this board? Would a TRUE (Thermalright Ultra-120 eXtreme) fit or will it cover 2 or more memory slots? Or maybe someone can recommend a great cpu cooler for this motherboard. Thanks.
    // Gras

    This is what I use.
    http://tinyurl.com/amb8k5
    It's gotten good reviews
    The thing points towards the back of the case (which i like cause I have a fan back there blowing air OUT the case) so without the fan it will not cover the memory. With the fan on it will barely be over the first memory. Though this isn't a problem unless you have some memory with some tall heat sink attached. I was able to move the memory from slots 3-4 to slots 1-2 without removing the fan and just sliding is up a little. Does use the same annoying (to me) wire fan holders like the Thermalright. Best to attach the thing before you put the motherboard in the case, Could be a pain in the a** otherwise depending on your case, (though I was able to do it with some pain and suffering).
    Oh yes..i'm using the same CPU you plan to buy.

  • DKA790GX platinum eterna reboot

    Config :
    DKA790GX Platinum
    4 Gb DDR2
    HDD sata 150 Go
    Gainward Radeon HD4870
    The problem : I have to use the reset button on mainboard to boot my computer after using the on/off button of the mainboard or the computer box. So i've update the bios to 1.7. Now my computer start, detect the drivers (CD and HDD) and then reboot again and again and again ...
    I've tried to use one of the 2 memory, i've test the HDD on another Computer, i've tried to use the mainboard graphic card instead of the gainward, i've change the mainboard for another DKA790GX Platinum with the same problem. I don't see the solution.
    Any idea ?

    Sorry, not read the guide :
    phenom II X4 940
    DKA790GX PLATINUM
    2x 2Go PNY DD2-800
    GainWard HD4850 ATI 512Mb DDR3
    HDD Sata 150 Go
    Windows XP
    Alim 600 Watt XILENCE
    Now i've put one memory stickin the first slot and the system start but with a Bad Bios Chesksum. Starting Bios recovery.
    I've download the last bios version 1.7 and put the A7550AMS.170 file on USB Key. I've the message Reading file "A7550AMS.1xx" but nothing happened next. What is the way to flash the bios now ?

  • DKA790GX Platinum No POST

    I just put everything back together from not using it for a few months.  The system turned on and booted into windows.  I restarted and went into bios, and now when I try to start the computer it doesn't POST.  The video card fan just spins at full speed.   I have a PCI diagnostics card and it gives me error E6- "To enable floppy and timer IRQ, enable internal cache."  I have tried to clear CMOS multiple times with the same result.  I will rebuild and try different ram sticks now, but would like to know if anyone has any input...
    System is:
    MSI DKA790GX Platinum bios 1.8
    Phenom II x3 720
    OCZ Platinum 2 x 2gb 1066mhz
    Sapphire 4870 1gb
    Corsair TX850W
    Fixed- I think the video card was not properly seated, sorry 

    That would cause the system not to boot.  Good troubleshooting and no need to be sorry.

  • MSI DKA790GX - Platinum + Raid 5

     
    Hi all, I'm new to this in the forums:), my name is Marcos Luburic, and hope to have a good experience with all of you who are part of this forum in its entirety.
    I would like to share with you a case, I've been dragging about 2 years ago from my computer que arme me. We at the beginning, I assemble a PC, and I put the Mother-DKA790GX Platinum MSI, AMD Phenom X3 8650, MSI ATI Radeon HD 4850 heat pipes, 2x2 GB RAM ocz ...
    The question is never, even today, I was clear, and able to do RAID 5 on my system, taking into account ke I have 4 hard disks of 500GB each ...
    elsewhere, appears ke I can use pen drives, a floppy drive, I have to update the BIOS ... many things, and not to do, and 2 years ago that I have a PC, and honestly I'm not making full use as you see ... and the machine was assembled, almost with the thought of him RAID 5 ...
    I hope answers about this, I am aware, and already, THANK YOU!!
    Im From Argentina, Buenos Aires.

    Quote from: MarkitoX on 02-February-11, 22:24:54
    of course, did everything but 1in First, I have the full 64-bit capable system, ie, memory, video card, motherboard, processor, all that is ready for 64 bits, so I should put Windows 7 Ultimate 64-bit?
    It's like I said in my last post. So long as you have 64-bit software to run then go ahead.
    Quote from: MarkitoX on 02-February-11, 22:24:54
    the second, before I bore the logo of the MSI motherboard, the logo of the monster that ... is like now, it takes much longer to load than before, no power to make the sign that says "press Ctrl + F to go Raid options?
    I would say it's normal to take longer now you have RAID enabled.
    Quote from: MarkitoX on 02-February-11, 22:24:54
    and another thing, when the bios environments, there appears no hard drive recognized, only the floppy, the dvd player, and another that says "Raid: Raid Ary 1" and then the other 3 discs rigid or appear, I hope answers, I hope I know how to respond because there is something strange
    I would imagine that because it says, 'RAID: RAID Ary 1', it has combined the drives rather than listed them individually.
    Quote from: MarkitoX on 02-February-11, 22:24:54
    ahh, and to install the windows drivers over raid called "AMD AHCI Compatible RAID Controller" do not know if this good ... and then when we had to press "next" to install windows would not let me, then I did remove the pen drive, and if I let myself go there with installation ... things that do not understand lol
    I'm struggling to understand quite what you mean here.

  • Will a DKA790GX Platinum run on my old psu?

    hi guys.  sorry if this is in the wrong forum section?   
    anyway, tomorrow, in the post my DKA790GX Platinum mobo will arrive with an AMD Phenom II X3 720 chip.  i am extremely broke at the moment and can not afford a new psu right now.
    can anyone tell me if its possible to run my old psu on the new board and chip?  ive had my current mobo and psu for about 5 years, and i feel a bit out of touch with hardware jargon.  my psu its still going strong, but im not sure if it has the right amount or type of connectors?  i have tried reading the mobo manual online and my psu manual but all these volts, amps and numbers mean nothing to me  :(  one thing in the mobo manual that struck alarm bells was the mention of 'atx 24'.  my psu only has 1 x 20pins connector that plugs into my current main board.  will this be enough? 
    my psu details:  antec true blue 480p  (not the antec true blue 2).
        *  Dedicated output circuitry for each voltage output, overcomes the limitations of combined output of traditional design--get all the power you need when you need it most
        * Voltage feedback to maintain accurate voltage to all components: adds stability to your system
        * Antec Low Noise Technology achieves the optimum balance between noise reduction and necessary cooling
        * ATX12V for AMD- and Intel-based systems, including P4
        * 2 serial ATA drive connectors
        * 2 double-ball-bearing fans
        * Gold-plated connectors
    Maximum Power: 480 Watts
    · Switches: ATX Logic on-off additional power rocker switch (115/230 Volt selector switch)
    · Special Connectors: AUX Power ATX12V 3-pin Fan Sensor Fan Only
    · Transient Response: +5V,+12V outputs return to within 5% in less than 1ms for 20% load change.
    · P. G. Signal: 100-500ms
    · Over Voltage Protection: +5V trip point < +6.5V, +3.3V trip point < +4.1V, +12V trip point < +14.4V
    · Overload Protection: Latching Protection +5V @ < 47A, +3.3V @ < 48A, +12V @ < 18A
    · Leakage Current: <3.5mA @ 240VAC
    · Unit Size: 5.9"(L) x 5.5"(W) x 3.4"(H) 15cm(L) x 14 cm(W) x 8.6 cm(H)
    · Net Weight: 5lbs. 2.3kg
    · Input Voltage: 115 VAC / 230VAC
    · Input Frequency Range: 47Hz to 63Hz
    · Input Surge Current: < 60A @ 115VAC
    · Input Current: 9.0A for 115VAC 5.0A for 230VAC
    · Hold-up Time: >17ms at Full Load
    · Efficiency: > 68%
    · EMI/RFI: FCC Class B CISPR22 Class
    · Output (Max Load):
        +5V: 38A*
        -5V: 0.5A
        +12V: 22A*
        -12V: 1.0A
        +3.3V: 30A*
        +5V SB: 2A
        * +5V, +3.3V & +12V maximum output 460 Watts max.
    · Operating Temp: 10 to 50ºC
    · Operating Alt.: Sea Level 10,000 ft.
    · Non-Operating Vibration: Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
    · MTBF: 80,000 hrs. @ 25ºC
    · Approvals: UL, TUV, FCC Class B, CB, VDE, DEMKO, NEMKO, SEMKO, FIMCO
    thank you!

    right..  thanks guys! 
    Fredrik - hmm..  yes, the 5000 does sound good.  i only went for the Phenom II because i thought it was a modern chip style, and therefore the best option to go for. if i had seen that the 5000 was a good competitor for it earlier, i would probably have gone for it.   i am too eager to get this pc set up though lol!  so i am going to stick with the chip when it arrives tomorrow.  
    Mike - i hear what you are saying about the corsairs.  i will start saving.  i need to save for a gfx card also.  for the minute, i will be running the onboard graphics, so my psu hopefully will cope untill i upgrade! 
    thanks again guys.  your advice is very much appreciated.      

Maybe you are looking for