DKA790GX Platinum - How to set new ram to 1066

I have just put together my new system which consists of:
AMD Phenom II 940
DKA790GX Platinum Motherboard
MSI N9800GT Video Card
500g Sata Drive
Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel
My problem is I assumed when I installed the ram that the motherboard would automatically set ram to 1066, wrong. It set it to 800mhz. I know how to set the dram voltage, but I need someone to tell me how to setup the bios to run the ram at it's correct frequency of 1066. The info for the ram per kingston site is 5-5-5-15 2.2v I have tried to read thru all the posts that I could, but I can't get an exact answer on how to do it. I am asking someone to tell me step by step how to do it in bios with this particular motherboard. I appreciate any responses to help me out..Thanks

BIOS, Cell Menu, "FSB/DRAM Ratio" setup to 1:2.66

Similar Messages

HT5622 hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

The iPhone has a feature called "Activation Lock" described here:
http://support.apple.com/kb/PH13695
Without that Apple ID, you will not be able to use that iPhone.

MSI MB DKA790GX PLATINUM SOCK AM2 PLUS 790GX VGA DDR2 1066 ATX

Hello everyone,
I bought this mb: MSI MB DKA790GX PLATINUM 790GX VGA PLUS Sock AM2 DDR2 1066 ATX. Until yesterday, the site was reported msi official support to the new six-core AMD, including the model 1055T-125watt, but now it seems no longer so?
Can you tell me why?
Thanks

http://global.msi.eu/index.php?func=newsdesc&news_no=999
http://event.msi.com/mb/amd/6core/

How to set new extreme with old extreme

how do I set up a gen 3 airport extreme using ethernet wire to newest extreme just bought it yesterday, not set up yet) to extend wireless network to far side of house

I am using my IMac osx 10.8 to make any changes to network and will use it to set up new AEBS,
Got it, the new AEBS will be the "main" router on the network.
where I want to put my 3 gen AEBS as a wired extender of network
Got it, the older 3rd Gen AEBS will connect to the new AEBS using a wired Ethernet connection and extend the nework.
Anyway. is this how I should set up my network to extend it with using my gen 3 APBS and with my new APBS 6h gen?
Once you have the new AEBS set up and working as your "main" router, other than making the physical Ethernet connection and typing in a device name that you want to use on the 3rd Gen AEBS, AirPort Utility will take care of all the settings for you automatically. You do not need to worry about any of this.
2nd question, if I get a new AXAC will I get better speeds or will I just get N speeds?
Not sure what you are asking. Only the new AEBS (and Time Capsule) will deliver 802.11"ac" speeds. Your 3rd Gen AEBS will deliver "n" speeds as will an AirPort Express.
3rd. can i after I set up a roaming network then use my old AX (A1264) to stream music to speakers/stereo?
Yes
will it be able to be wireless, or will the dreded Apple rule of not using 3rd repeater come into play?
Wireless
Also do you have any fixes for Roku 3 not playing well with the new APBS
Sorry, I have no "hands on" experience with any Roku products, so cannot help on that.
Suggested plan:
First, get the new AEBS set up as your new "main" router and check it out for proper operation. AirPort Utility will guide you through the setup.
Post back when you have done this and then I will provide tips on how to set up the 3rd Gen AEBS to extend the network using Ethernet. Setup is very easy if you follow the steps.
Once the 3rd Gen AEBS is setup and working, then the A1264 AirPort Express will get attention. Setup will very easy using AirPort Utility.

How to set new APN on iphone6 plus

i am using iphone6 plus with IOS version 8.1.2 and try to set a new APN on cellphone, but didn't found the option.
Why does my Cellular Data not have the APN settings to edit?
Setting----cellular----(only have data roaming,personal hotspot)
someone knows how to set a new APN on iphone6 Plus, thank you very much.

Greetings wangxiaobao,
You can change the APN setting on your iPhone using the steps in this article -
iOS: About cellular data network settings (viewing or editing the APN) - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

How to set newer version of stored pages option as never using httpd.conf

How to set check for newer version of stored pages option(Tem Internet file-> Setting ) as never using httpd.conf file?

See:
*http://kb.mozillazine.org/browser.cache.check_doc_frequency
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

How to set new password if you don't remember old ...

Hello,
I can still login with Microsoft account, but Skype keeps rejecting my skype password. Tried to recover it using dialog box, but this doesn't work - it either, moving me rounds and rounds without possibility to set new or view old password, either proposing me to change my Facebook password though my Facebook account isn't linked to Skype. Crazy, isn't it? By the way, those security codes are totally useless in case when smallest string in Skype scripting fails.
Spend hours reading topics. Nothing that could help. I have never seen any other network, service or software wich was so uhelpful in recovering passwords and feel sorry for what I have to use Skype and not something reliable and trouble-free.
Still problem remains insolved an I have no clue how to change Skype password in accessible way.
Thank you for any helpful reply, if ever I will have some at this.. place.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103250)

How to set new tabs to home page when opened

I have no problem setting up my home page, but new tabs open as blank pages. How do I set up Firefox to open new tabs to my home page, when I manually open a new tab?

"Donations" to add-on developers are not required. Add-on developers do appreciate donations from users since they devote their time and efforts '''''free of charge''''' to develop the add-on(s). Donations also help pay for costs incurred in operating a website and some have online help forums to help their users with support questions.
Tab Mix Plus is a great add-on, I use it and like it, but it is a bit "heavy"/large to install for just that one function. Tab Mix Plus performs many functions related to tabs and has many, many options that you can set related to tabs, including the one that your requested.
An add-on that is much smaller and is designed to perform that one function, opening a tab with the page you specify, is New TabURL:
*New TabURL: https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
*After installation and restarting Firefox
*#Open the options (Add-ons > Extensions, click Options next to New TabURL)
*#Set your options and/or enter the URL you want to open in new tabs
*#Click "Save"
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How to set new scratch drive

So, I go to capture some footage, it won't let me. I only have 8 minutes left. It says I need to set a new s cratch drive. How do I do that?

Page 148 of the Final Cut Express Users Manual explains the purpose and settings of scratch disks.

How To Install New RAM - tell what I've got

All: I've installed RAM on my Desktops over the years but never on a Laptop. I purchased my MBP with 1GB RAM but now that I need to run Parallels for school classes it appears from all the threads I've read here that Parallels needs at least 1.5GB RAM to run OK and more to set it on fire.
Q1: How difficult is it to install RAM on a MBP?
Q2: I don't know how many chips are in there now but from what I have read it appears that putting in 'Pairs' of RAM versus just getting one 1GB RAM chip (to add to my existing configuration whatever that is) is the preferred method. Comments? Suggestions?
Q3: A local Mac Store wants $35 to install the RAM (not including the price of purchasing the RAM) is that the prevailing rate or should I shop around further?
Thanks all for your help and input.

All: I've installed RAM on my Desktops over the years
but never on a Laptop. I purchased my MBP with 1GB
RAM but now that I need to run Parallels for school
classes it appears from all the threads I've read
here that Parallels needs at least 1.5GB RAM to run
OK and more to set it on fire.
Q1: How difficult is it to install RAM on a MBP?
Q2: I don't know how many chips are in there now but
from what I have read it appears that putting in
'Pairs' of RAM versus just getting one 1GB RAM chip
(to add to my existing configuration whatever that
is) is the preferred method. Comments? Suggestions?
Q3: A local Mac Store wants $35 to install the RAM
(not including the price of purchasing the RAM) is
that the prevailing rate or should I shop around
further?
Thanks all for your help and input.
Q1: Easy. Remove AC power. Remove battery. Using a small screwdriver remove three screws in the battery compartment. Remove the metal plate that they were securing. There are two memory slots.
Q2: Use System Profiler to determine if one or two memory slots are currently in use before you open it up. Apple->About This MAC->More info...->Hardware->Memory
Q3: I don't know. I installed the memory myself.

How to set new hostname

Hi Experts
Right now my solaris box have a hostname= unknown. I want to change the hostname to myhost.
My system takes the ip from the DHCP server. I did try the following changes to set the new hostname But it doesn't work.
I changed the host name in the following files;
/etc/hosts
/etc/hostname.hme0
/etc/nodename
/etc/net/ticlts/hosts
/etc/net/ticots/hosts
/etc/net/ticotsord/hosts
After that I issued the command
hostname myhost
But after issuing this command I am unable to open any new console and when I log off , I get the black screen.
Can any please tell me that how I should change the host name or what the thing I am missing in this procedure.
Thanks
Kashi

I had exactly this problem changng the Solaris hostname running SPARC Solaris 8 on a PC network with a NT server as domain controller and DHCP server. The Solaris machine used PC Netlink to appear on the network like a NT server and even had the desired hostname. However on Solaris itself the hostname was always "unknown". I tried editing all the config files, running hostname and sys-unconfig but it always reverted to unknown after a reboot. It turns out it was trying to get the hostname from the DHCP server and when it got nothing the initialisation script set it to unknown.
The solution is to go to NT server, start DHCP manager and open the properties page for the connection to Solaris and record the unique identifier and the IP address. Then delete the connection to Solaris and add a reservation of the IP address using the unique identifier. Also click on the options button and add a hostname setting with the desired value. Then reboot Solaris and it picks up the hostname.
If you aren't using an NT server then I don't know how to make the above changes. However it is possible to find the initialisation script in /etc/init.d (can't remember the file name) and change "unknown" to your desired host name. Or better still read it from a file.
Best of luck

How to set new active Mode?

Hi!
I have got three open modes. First mode VA02, second mode MM02 and third mode SE80. SE80 is active, which means it s above the others. In SE80 I would like to process an report, which sets mode one or mode two active. How can I do that?
It's just an example, but it focuses pricesly my problem.
Thanks
Christian

Hello Christian
At first glance Max' answer does not look like a stroke of genius yet where in the SAP system have you observed the behaviour of modes (or sessions) you are describing? I am not aware of any place (which does not exclude the possibility that there is one).
However, creating a new active mode is easily done using various function modules or classes, e.g.:
- function module TH_CREATE_MODE
- static method CL_IMC_MODE=>create_mode( ) -> returns a mode instance where you can call go_mode->call ( <transaction> )
- static method CL_RECA_GUI_UTILITIES=>call_transaction
I hope I could give you some input on your topic.
Regards
Uwe

HT5622 How to set new security anwser?

Dear Sir or Madam
sorry,i have already forget my security anwser, and didnt set the aid email,now what should i do,how can i reset the new security anwser？

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97886)

How to set new sudo password prompt?

Hi guys, i've a problem with sudo!
I want set a new password prompt for me but unfortunately don't how to do...
I set a defaults line in sodoers file with this syntax:
Defaults passprompt="MyPass:"
but don't work...
I tried also start sudo with -p paramenter: sudo -p "Mypass:" but nothing
Someone can help me please...:(

skymt wrote:
Actually, sudo has an option for this:
sudo -p 'Enter your password, %u:'
'%u' will be replaced with your username. You can also use %H or %h for the hostname with or without the domain, %U for the username sudo will use to run your command, or %% for an actual percent sign.
If you want to set a permanant prompt, either set the environment variable "SUDO_PROMPT" or set "passprompt" in /etc/sudoers using visudo.
I tried this solution but don't work for me..
If i try to do:
# sudo -p 'My Password:' i've "Password" for pass prompt..
I've re-checked the sudoers file, is this:
# sudoers file.
# This file MUST be edited with the 'visudo' command as root.
# See the sudoers man page for the details on how to write a sudoers file.
# Host alias specification
# User alias specification
# Cmnd alias specification
# Defaults specification
Defaults passprompt="Password:"
# Runas alias specification
# User privilege specification
root ALL=(ALL) SETENV: ALL
# Uncomment to allow people in group wheel to run all commands
# and set environment variables.
%wheel ALL=(ALL) ALL

How to set new role for new custom entity only

I created a new custom entity, I want to create new role for it only. So I created new role and set custom entity User role. But When I login the user with created role, it show now right to access CRM.
Awen

Are you trying to grant access so that users can use this custom entity but no other data at all?
You will still have to include access to all sorts of bits of CRM just to make the user interface work - especially the things on the Business Management and Customization tabs of your security role. You also need to check these 6 settings:
Special privileges in CRM Security Roles
If this is the only security role you plan to give to your users, I would suggest you start from a standard role and remove access to other entities, rather than start from blank and work upwards.
Hope this helps.
Adam Vero, Microsoft Certified Trainer | Microsoft Community Contributor 2011
UK CRM Guru Blog

DKA790GX Platinum - How to set new ram to 1066

Similar Messages

Maybe you are looking for