DKA790GX POST then 1long / 6 short beeps and don´t start

I have a DKA790GX mobo, i don´t know whats hapend, but when i start the machin it plays 1 long beep and 6 short beeps, after that i can´t do nothing, th kboard can´t work, th mouse to, and i have no monitor signal. Please help me.

>>Posting Guide<<

Similar Messages

T60 exhibiting 1 long and 2 short beep and black screen

Hello all,
i own a thinkpad t60 with ATI radeon x1300 graphics card. I read through your complete "T61p exhibiting 1 long and 2 short beep and black screen" thread and I have the same beep problem with my t60. Let me briefly explain you how the beeps occur in my system:
My t60 had this problem after I initally formatted my system and this 1 long and 2 short beeps used started occuring. But the strangest fact is that after those beeps and blank screen, the power light in the indicator light group is on along with battery and ac power lights. But then when I repeatedly switched on and off the system, the sequence of beeps dont occur all the time. Then I completely switched off the system and when I booted the next times I started pressing the ESC keys after pressing the on button. Most of the times ( 8 out of 10 times), the first 4 times it produced the same beep codes but after the 5th time, the system turns on. All those 5 times, I kept on pressing the ESC key once I powered on the system.
Also, every time I'd a chance I did run the pc doctor to find any pro blem with the board or video card, but every time it turned out to be fine. So now,every time I turn my system off or use a stanby/hibernate whichever turns the screeen off, on immediate reboot it comes out blank but with the power indicator light on.
Here by I also list any changes that I'd made:
1. I reformatted the system and only then this started to occur.
2. after reformatting lsat time, I forgot to change the boot sequence but now I;d fixed that by pressing F9 under startup in bios.
3. I'd also once replaced my RAM with a different one (have 4gb now, but I suppose t60 can support a max of 3gb). WIll this be a problem?
4. And in the recent times due to the ati3duag.dll BSOD has occured. Any idea what this error might be due to?
5. Due to all these uncertainities, I havent updated tot he latest ATI driver which is 8.593 * and I still have the 8.293* . Will updating to the new one be a problem?
I appreciate any help or guidance you can give me in this matter and I badly need to fix it for my projects.
Thanks
Vishak

I think your best way of diagnosing this is to remove the new ram and install only one chip, if the problem persists, try the other. If the problem persists, then I'd try booting from a Linux LiveCD (any will do but I'd recommend ubuntu.com). boot with the option to not change anything on your PC. If you get this same problem when booting linux, then you know it's a hardware problem, in which case I'd remove as much hardware as possible, drives, cards, etc... if it still persists, then you most likely have a bad system board. In this unfortunate event your best option would be a used one. A new one would cost more then the laptop is worth, but used T60 boards are pretty reasonable, I just found one for another member and could probably help you find one to if necessary, but lets hope it's just a ram chip. And by the way, your system is limited to 3GB, but in the chipset, and in your 32bit OS they came installed with. You can install 4GB, but it won't be able to use it all.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

One short beep and one 1 beep on hp pavilion media center 8120n

My tower is not booting up when I turn it on. My son took the side off and was going to put more memory in it for me, but in the end he didn't. He put the old memory back in and put the side casing back on. Today, when I turn it on, it has 1 short beep and 1 long beep. It just won't boot up. Can anyone tell me what I need to do to get it back up and running?
This question was solved.
View Solution.

RBurke, welcome to the forum.
The BIOS Beep Code that you are hearing is caused by a memory problem. Here is a guide that will help solve the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07107
You should read the entire page. The beep codes common to HP computers are toward the bottom of the page.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My macbook pro 2006 fan goes high and then makes a fast beep and shuts down it been happening since i updated

my macbook pro 2006 fan goes high and then makes a fast beep and shuts down it been happening since i updated it should i update to lion?

No, this problem should be solved.
The MBP shuts down when too hot, to protect itself. First see if it is a process running astray: start Activity Monitor (in Applications/Utilities) choose <all processes> and click the %CPU column: are there processes that are using more than 50% cpu power? If yes click it and quit it, and tell us which one.

T61p exhibiting 1 long and 2 short beep and black screen

All,
There have been multiple discussions over the past months concerning a 1 long and 2 short beep symptom on some T61 and T61p model systems. Over the last several weeks members have begun to start additional topics on this theme and cross post between threads.
I am consolidating all the threads into this new discussion today. Since many of these discussions were originally parallel, the dates and some of the context will now appear somewhat out of chronological order. Please keep that in mind while browsing this thread.
If you are presently experiencing the 1 long and 2 short beep code with a black screen on boot up, I would recommend that you contact service at this time for assistance.
UPDATE 1/4/2011
Previously, I have advised customers to contact service for assistance with the symptoms discussed here. In an effort to maintain customer satisfaction and loyalty, Lenovo has repaired a number of systems as post warranty exceptions. Lenovo will continue the post warranty support; however, with some revisions to the extended coverage effective December 31, 2010.
Customers who experience these symptoms on qualifying models that are no more than six months beyond expiration of warranty should continue to contact support for assistance. This additional coverage ends March 31, 2011.
Coverage beyond this date is available under the terms and conditions of extended warranty or maintenance agreements. Warranty extensions may be purchased for systems that are still within the base warranty period, and post warranty maintenance agreements may be purchased to provide coverage after base and extended warranty periods have expired. Extended warranties and maintenance agreements are a great way to ensure coverage for all the major system components.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Solved!
Go to Solution.

2 is a coincidence, 3 is a pattern... and your problem is identical to mine, too, and happened just some days after mine did...
It seems to me, without wanting to be alarmist, that the T61p with the 570M gpu (or a batch of them) is failing with the same exact problem (1 long 2 short = GPU error) at the exact same time... scary thought, really.
Mine arrived at the lenovo repair center (it's still on warranty) on wednesday, and the status shows as "Repair complete, shipped to customer" as of yesterday. There is no tracking number or "Failing Element / part number" in the status page, tho. It hasn't arrived, either.
Do you know your planar card / motherboard part number? It would be interesting to know if it's the same as mine (42W7653). Were you affected by the problem shown at http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=30460&view=by_date_a... ?
And once Mark_Lenovo reads this, Mark, do you need any info? (serial number for the laptop, easyserv reference, etc?)
EDIT/UPDATE:
I called the EasyServ warranty customer support to ask if they had any additional info not in the website, and as a matter of fact they do. The (very, very helpful and nice) man on the phone told me that the motherboard had been replaced and the laptop was due to arrive today, and he gave the UPS tracking number for it, which indeed says it's scheduled to arrive here today, at some point.
Once it's here I'll update with information about the actual repair and the part number of the new motherboard, etc.
To be honest I'm more than pleasantly surprised about the service: the box for shipping my laptop arrived on wednesday, it was picked up that very same day, the laptop was repaired on thursday and arrives to me today, friday. If the laptop works as expected, this is a 10 out of 10 for lenovo customer support, at least for me.
I'm less-than-happy about the quality of the product, of course, but at least I got the 3-year warranty so lenovo paid for everything.
Message Edited by Kry on 04-10-2009 01:18 PM

On startup, what does 3 short beeps, 3 long beeps, 3 short beeps, and a black screen mean?

On startup, I hear 3 short beeps followed by 3 long beeps followed by 3 short beeps, then nothing. Screen remains black the whole time. Tried to boot holding down option key - nothing. 2010 MacBookPro running Snow Leopard. Any suggestions?

Intel-based Mac Power On Self Test RAM error beeps
Power On Self-Test Beep Definition - Part 2
3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

X220 5 short beeps pause and 2 short beep and black screen

have x220 i buy from ebay system board after installation i have problem: black screen and 5 short beeps pause and 2 short beeps anyone have idea how fix it? self

http://support.lenovo.com/us/en/documents/ht035729

I hear 1 long beep and 2 short beeps and I get no video.

I have a MSI mainboard AMD socket 970A-G46. When I turn on my PC, one long beep and two short beeps will occur. Second, I will not see any video. What is the cause of this and and do I get to the BIOS menu on this mainboard?
Also, sometimes the my PC will go to sleep mode on its own and when I press the button to get it out of sleep mode, it will not go out of sleep mode. What is the cause of this and how can it be solved?

Here is the information about my PC.
Windows 7 Home Premium
MSI Mainboard: AMD Socket 970A-G46 CrossFireX
Sentey Power Supply and Coolers
Power Supply- BCD450-0C
Coolers- 1 XFan210mm and XFan80mm x 2
DDR3- G.Skill Ripjaws X- F3-12800CL9D-863XL
Graphics Card- Gigabyte AMD Radeon HD 6450 Series- GV-R645-1GI
I hope this is enough information. Now, can someone tell me what is wrong with my PC?

K9N4 SLI - three short beeps - windows won't start

My system has been running for at least a year without problem. I took the hard drives out and put them into a new system and put 2 other hard drives into this system. I reloaded windows, but after the second boot of the install process, windows tries to start, then reboots, even when trying safe mode. I tried 2 different versions of windows. These disks were fine in another system. When it boots, I get three short beeps. I have NO USB devices connected. I only have 2 hard drives, floppy, DVD, and video card. I read elsewhere in these forums that the three beeps are usb devices, and I did have 2 connected, but now have unplugged them. I get 3 beeps either way. I have completely removed power to reset it, no change.
The system I put the old drives into is working fine, and I pulled these drives out of a working system. The windows install runs fine until after the second boot, tried both XP home and XP Pro. I'm beginning to wonder if there is a hardware problem, but why would windows get that far and no further. I've tried setting the BIOS to optimized defaults, then just enable RAID, since I'm using a mirror.

Oh, sorry! I forgot to answer.
Beeping in this case has nothing to do with Windows or the hard disks, more than that the new ones probably consume more power. Beeping is almost always memory related, but it can also be the graphic card's memory. The PSU is probably not enough any longer. (My Father has got a 380W Antec PSU, but his system is five years old.) http://www.antec.com/Believe_it/product.php?id=NjM= ...And:
Max. Load 20A 20A 12v1 17A 12V2 15A
But before you buy a new PSU, in desperation, you might also try these troubleshooting steps:
- Minimise the system. Use but motherboard, processor and memory and the PSU of course.
- Use only one stick of memory, in the memory slot closest to the processor.
- Make sure all power cables are firmly in place, one is needed close to the processor for example.
- Check the dust situation - but I think you have moved around inside so much already it should not be a problem.
This is not to be rude, but occassionally when you work inside a case, your negative energy - or positive - create an electrical pulse, bigger than the system can handle. Particularly memory/graphics memory chips are affected. If that is the reason, you can only hope a long period of inactivity and without connection to electricity (front or back) helps. You even have to take the CMOS battery out. Long period? At least over night.

Kmix and Klipper crashes and don't start, KDE 4.4 [SOLVED]

I had a trouble with Plasma after adding a "fancy panel" which was placed at the same position as my normal panel. Everytime I tried to remove it, Plasma crshed, so I had to delete a part of a config file. But also the Klipper and Kmix don't start:
Crash handler says:
Klipper:
Application: Klipper (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708493 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c62459 in kdemain () from /usr/lib/libkdeinit4_klipper.so
#31 0x0000000000406b7e in _start ()
KMix:
Application: KMix (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708553 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c524b0 in KMixApp::KMixApp() () from /usr/lib/libkdeinit4_kmix.so
#31 0x00007f6051c2b74d in kdemain () from /usr/lib/libkdeinit4_kmix.so
#32 0x0000000000406b7e in _start ()
How can I fix it?
Last edited by Staerseus (2010-02-14 12:19:01)

SOLVED! Update to the newest version of KDE 4.4 helped me!

HP Pavilion a1550e, when I turn it on i get 2 short beeps and 1 long beep.

My computer just stopped working. I turned it off and when I turned it back on, the monitor won't come on and it beeps intermittently - 2 short and 1 long.
This question was solved.
View Solution.

Here are the original specs and configurable options for your HP Pavilion a1550e CTO Desktop Computer. Please indicate all options ordered on your computer as we don't have access to that information. Please see this HP document entitled "Computer Does Not Start and Emits an LED or Beep Code". The short-short-long code appears to indicate that the computer is "Unable to initialize video or video card required but not installed."
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

T30 Four cycles of four short beeps and a blank screen

I know this is a security issue. What i dont know is how to actually clear the fault.
Does anybody know how to unlock this so the laptop can be used again.
Thanks
Paul

Paul, welcome to the forum,
In the Hardware Maintainance manual (p. 58 of pdf), it states against the beep code under "FRU or action, in sequence" that the only action to take is to replace the "System board (IBM security chip).
Sorry, but it seems there is no other option.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

1 long beep the 2 short beeps, and no screen dv9000

hi everyone,
Ive got a dv9000 (its a dv9341eu)
AMD 1.8ghz turion64 x2
When i turn it on it beeps 3 times and the screen does not come on, i can hear the fan turning if that helps.
I want to know if its the graphics card or the motherboard or CPU. ( i dont want to buy a new motherboard in case it turns out to be the gpu)
Is there any definate way of finding out?
thanks, sam @ scunthorpe computer repairs

probably the graphics card, but will need the P/N to be sure
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Re: Satellite P300 - POST screen blank on booting up and very slow start up

Hi,
I have a laptop Satellite P300. On booting up vista the microsoft logo comes up and then when the POST screen should be showing me what the bios is checking the screen is blank.
It remains blank for 5 to 10 mins then the pointer appears then it finally goes to the desktop.
I suspect the bios is hanging on something but I can't see cos the screen is blank. I suspect there is a setting somewhere. I can enter the bios but can't find anything in there.
Also regards to the extremely slow boot, I have disabled nearly all the start up programs but it has made no difference.
Has anyone any ideas?
Thanks

Hi
Everything runs slowly but finally the Windows OS boots up properly. Right?
Hmm. you can access the BIOS press F2 immediately after power button has been pressed.
This should allow you to access the BIOS. There you should press F9 to set the BIOS to default settings. Save the changes and reboot the unit again.
Additionally I would recommend checking the HDD. You could use a tool called Drive Fitness Test. This tool can be downloaded for free (google for that).
By the way; did you try to recover the notebook using recover disk?
Maybe you should try this but note; this would format the HDD so backup the date before starting recovery.

I recently did a software update, and now all my macbook pro i7 processor does is beep and it wont start up. Does anyone have any solutions?

Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?

It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.

DKA790GX POST then 1long / 6 short beeps and don´t start

Similar Messages

Maybe you are looking for