DKU-2 Cable driver for win98

Hi
Does anyone know where I can get a win 98 driver for the DKU-2 cable that came with my 6630?
Thanks
jimmy

i looked at the mobileaction website and did see the advert for win 98 se drivers and software for this phone.
however the manual did not really give any information on what can be done with the software, plus with that software not everything seems to be available for the 6630.
you mention that you have win 98, not win 98 se. is this the case? the mobileaction stuff does not seem to support win 98 either.

Similar Messages

  • Nokia CA-53 cable driver For Linux

    From where can I download the Nokia CA-53 cable driver for Linux??

    From nowhere. Such a piece of software does not exist.

  • Nokia Connectivity cable driver for Nokia 6730 cla...

    I tried to install Nokia PC Suite for my Nokia 6730, but without success, because the system says: "The older version of Nokia Connectivity Cable Driver cannot be removed."
    What can I do ?
    Solved!
    Go to Solution.

    ceriana2 wrote:
    Thank you for your proposals. But they did'nt help. I did all the proposed steps, but the message again is: The older version of Nokia connectivity Cable Driver cannot be removed.
    Do you have another idea ?
    Are you logged in as admininstrator? Use Revo to uninstall all Nokia related software including drivers and start again.
    http://www.revouninstaller.com/revo_uninstaller_free_download.html
    Message Edited by hadimassa on 01-Feb-2010 05:29 PM
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • MS-6915 driver for win98/XP?

    Help!
    Does anyone have a driver for the IDE raid controler card MS-6915 ver;1?
    It is equipped with a Promise PDC20265 chip.

    Hi!
    Thanks for the advice and the very fast response!
    I had allready tried that driver, but here is the reason to my first problem;
    Win98 identified the MS-6915 as a Raid card and then the driver was not accepted. I had to manually install it by selecting "Promise" as manufacturer and then "Ultra ATA 100" as HW. This made the card function poperly according to the system information, but
    Second problem (not solved);
    I am not able to reach the HDD. Guess it is because I have an old AT MOBO with a BIOS that does not allow booting from anything beside the A- and C-drive (not the CD or SCSI)......

  • Display Driver for Win98 (parallels)

    Yes, I am crazy enough to try and run Win98 through Parallels on my MacBook. Using Windows XP that way is a blast, so I was curious how my old copy of Windows 98 SE would perform. Can anybody help me locate a '98 screen driver for the MacBook display? The standard configuration after setup only offers 16! colors!
    Thanks for your help!
    MacBook   Mac OS X (10.4.8)   1.83 Ghz Core 2 Duo, 1 GB RAM

    Hello
    Like Joao said, the graphic driver for this unit is only available for Xp and W2k.
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modItemList.jsp
    Well, you can check other Toshiba notebooks which have the same graphic card and try to download this driver.
    You can also try to search on the European Toshiba website for the units with the same graphic card.
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Good luck
    Bye

  • Cable Driver for Vista

    Hi
    I have been trying for ages to connect to NSeries PC Suite.
    I get as far as stage 2 on the connection wizard but then vista says that the driver is not compatible with my operating system. Can anybody help please.
    George

    Get the latest Nokia PC Suite, it is now V. 7, this is much better the N-series PC suite, and the drivers are installed automatically...

  • Portege 7020CT Modem Driver for Windows 98

    Hi,
    Having had to do a complete reinstall of win 98 i have lost my modem driver.
    The one from the site doesnt work as they are all french pcmcia drivers. This one is built in.
    Help.

    Hi
    I found on a Toshiba US website the right modem driver for Win98.
    Please check this link:
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    Bye

  • Need Driver for Windows 98

    I just got this iPod Nano and it wont load the driver or iTunes on my windows 98. Is there some place I can get the driver for Win98?

    Useful links
    iPod USB driver for Windows 98
    Guide to iPod and Windows ME
    Anapod Reinitializer 1.0.0
    Anapod Reinitializer is a free, lightweight utility for reformatting and reinitializing your iPod. Its function is equivalent to the Restore button in the Apple iPod Updater utility. Anapod Reinitializer runs on all versions of Windows, so it allows Windows 98/ME users (who cannot use Apple's software because it only runs on 2000/XP) to format their iPods.
    Anapod Explorer 8.7.3
    Anapod Explorer is hands-down the most advanced Windows software companion for your iPod. Anapod can copy and backup iPod music and playlists to your PC and integrates your iPod into Windows Explorer as a full-fledged device under My Computer, allowing you to transfer files to your iPod as well and use a familiar Explorer interface to manage on-board music, playlists, contacts, notes, and more. Also included are a built-in database called AnapodSQL and a one-of-a-kind web-based streaming interface to your iPod called Anapod Xtreamer.

  • Problem when install driver for DKU-5 cable

    After installing driver for DKU-5 cable follow guide line, i conected DKU-5 cable with my computer but there is error appear that is 'can not pass winxp logo testing'.So i can not complete install driver for DKU-5 cable.Please help me.Thanks.

    When you get that message, just select "yes" or "continue anyway" and you should be fine.

  • X64 Driver for Nokia DKU-5

    Hello, Can anyone tell me if there is a downloadable driver for x64 Edition for DKU-5. I mean how can I connect my phone with my PC? As soon as I plug-in the cable, the driver do not instal. Please help.

    Nokia's support pages only have drivers for "Windows 98SE/ME/2000/XP", and I suspect nobody else has written any 64-bit WinXP drivers for that cable.

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?

    I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?
    Other info is available:
    Superdrive MFG date: Sept 2009
    Model: DVR-118LBK DVD-R/RW Writer Unit
    My Macbook is: Mid-2010, running Mavericks
    Thanks in advance, God bless!

    That's a nice Pioneer DVD±RW drive - and an upgraded replacement for the original optical drive that shipped with that G5.  For a finished look, you'd want to install it in an external enclosure for 5.25" IDE/ATAPI drives that converts it to USB connectivity.  Because SATA optical drives have replaced ATAPI drives in recent years, the selection is getting more limited for a new enclosure, although used ones can undoubtedly be found at ebay.  Here's an example of one, although it only features USB connectivity.  You can also find enclosures that have both FireWire and USB connectivity, which for Mac users is beneficial.  Booting the computer (if needed) by a FireWire-connected device is generally more reliable than USB booting.  If this isn't important to you, then a USB-only enclosure would be adequate.  The enclosure will have directions, but essentially all you need to do is plug in the power cable and data ribbon cable and then secure the drive to the bottom plate of the enclosure with the included machine screws.

  • Mac driver for Nokia CA-42 data cable

    I bought the Nokia CA-42 data cable w/o realizing that it only supported PC operating systems. I want to sync my Nokia 6820 phone w/iSync 2.2, but I'am currently stalled. Has a driver for the Mac been created?
    help needed here!
    eMac   Mac OS X (10.4.6)  

    I bought a CA-42 cable for my Nokia 3220. I have Virtual PC v.6.1.0 and Windows XP Pro installed on my eMac. I have enough RAM to handle running VPC/WinXP and Mac OS X at the same time (768 MB). Can I use the cable to connect my phone to my Mac, but while running VPC and WinXP? The phone SHOULD think it's connected to a PC shouldn't it?
    I want to use the Nokia PC Suite to manage my phone, but also to back it up, as I want to have it flashed, and need to save everything, first.
    I haven't been successful, so far, and would like to know if using Windows on VPC can be done, what settings I need to adjust, or if you have to actually have a PC (which would be a real downer [G]). This would be so much simpler if Nokia would just come out with a Mac version of their suite.Thanks.
    eMac   Mac OS X (10.3.9)  

  • Need Nokia cable driver of CA-53 for server 2003

    I have search the site but not able to get the nokia cable driver of CA-53 for Window server 2003.
    On previous operating system XP. Its was working correctly. But when I update the Operating system to Server 2003. PCsuite fail to connected the Mobile (N73).
    Its asking for the driver which not available on the site.
    Does anybody knows it?

    Does windows install drivers for your phone?
    (you can check this from windows device manager)
    And when you open Nokia connection manager, is there USB connection available?
    Also, what PC Suite version are you using?
    Message Edited by miksu on 20-Apr-2008 07:51 AM

  • Windows Vista RC 1 & DKU 2 usb cable driver error.

    Hello, i have problem whilst installing PC Suite on Vista RC1, i get an error 1721 when atempting to install the cable driver (build 681 rel-13) with build 68 rel-22 it installs but doesn't find the phone (6680) when connected. Vista builds 5472 & prior ones didn't have this problem, only 5536 & RC 1.

    04-Sep-2006
    07:35 PM
    seraphim wrote:
    i have used vista with pc suite - no problems. but that was 6.8.22, not the latest version. i will try and find the build number
    i remember sister_bliss has also had this working, try a search to see if there is a thread. may help
    Howdy there partner, good to have you back

Maybe you are looking for

  • With  'BAPI_REQUISITION_CREATE' not able to create service line item

    Hi Experts Please help me with this. Am working with 'BAPI_REQUISITION_CREATE'. Able to create PR ( with constant data) but the service line item is not seen with ME53N. No error message displayed. Have checked the SAP note 420331. The code is as bel

  • My playbook don't have thai keyboard and thai language.

    please update thai language and thai keyboard to my playbook. i'm so sad and unhappy. many people in thailand wating for you.please update thai language now. thank you. Solved! Go to Solution.

  • Java - USB I/O

    Hello, I have problems with the running of my USB app.  I get a error of "Exception in thread "main" javax.usb.UsbException: Properties file javax.usb.properties not found."... Well, I have killed Google with this error, but still no luck. This is th

  • Can't get pictures from my Canon 20D

    Hi, I've tried to connect my digital SLR camera (Canon 20D) to the iPad via the USB Camera Connection Kit, but i've got the message "the device you are trying to use is not compatible". Is this true? I mean, cannot transfer pictures from this camera

  • New to Logic - How do i bring up Ultrabeat?

    I'm new to producing and have just installed Logic 9. Does anyone know how i bring up Ultrabeat? Or any other interfaces of some of the drumkits and synths? so far, i am just playing about with the sounds in the library. Thanks.